whiterose

linux unikernel
Log | Files | Refs | README | LICENSE | git clone https://git.ne02ptzero.me/git/whiterose

commit 1e2af254ef130e37d9fb3cb1bc9bfbf6ea184b4a
parent b271b2127e6654a72dc1685f0825fe1cc2f36939
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date:   Tue, 25 Dec 2018 13:47:41 -0800

Merge tag 'pm-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These add sysadmin documentation for cpuidle, extend the cpuidle
  subsystem somewhat, improve the handling of performance states in the
  generic power domains (genpd) and operating performance points (OPP)
  frameworks, add a new cpufreq driver for Qualcomm SoCs, update some
  other cpufreq drivers, switch over the runtime PM framework to using
  high-res timers for device autosuspend, fix a problem with
  suspend-to-idle on ACPI-based platforms, add system-wide suspend and
  resume handling to the devfreq framework, do some janitorial cleanups
  all over and update some utilities.

  Specifics:

   - Add sysadmin documentation for cpuidle (Rafael Wysocki).

   - Make it possible to specify a cpuidle governor from kernel command
     line, add new cpuidle state sysfs attributes for governor
     evaluation, and improve the "polling" idle state handling (Rafael
     Wysocki).

   - Fix the handling of the "required-opps" DT property in the
     operating performance points (OPP) framework, improve the
     integration of it with the generic power domains (genpd) framework,
     improve the handling of performance states in them and clean up the
     idle states vs performance states separation in genpd (Viresh
     Kumar, Ulf Hansson).

   - Add a cpufreq driver called "qcom-hw" for Qualcomm SoCs using a
     hardware engine to control CPU frequency transitions along with DT
     bindings for it (Taniya Das).

   - Fix an intel_pstate driver issue related to CPU offline and update
     the documentation of it (Srinivas Pandruvada).

   - Clean up the imx6q cpufreq driver (Anson Huang).

   - Add SPDX license IDs to cpufreq schedutil governor files (Daniel
     Lezcano).

   - Switch over the runtime PM framework to using high-res timers for
     device autosuspend to allow the control of it to be more precise
     (Vincent Guittot).

   - Disable non-wakeup ACPI GPEs during suspend-to-idle so that they
     don't prevent the system from reaching the target low-power state
     and simplify the suspend-to-idle handling on ACPI platforms without
     full Low-Power S0 Idle (LPS0) support (Rafael Wysocki).

   - Add system-wide suspend and resume support to the devfreq framework
     (Lukasz Luba).

   - Clean up the SmartReflex adaptive voltage scaling (AVS) driver and
     add an SPDX license ID to it (Nishanth Menon, Uwe Kleine-K├Ânig,
     Thomas Meyer).

   - Get rid of code duplication by using the DEFINE_SHOW_ATTRIBUTE
     macro in some places, fix some DT node refcount leaks, and do some
     other janitorial cleanups (Yangtao Li).

   - Update the cpupower, intel_pstate_tracer and turbosat utilities
     (Abhishek Goel, Doug Smythies, Len Brown)"

* tag 'pm-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (54 commits)
  PM / Domains: remove define_genpd_open_function() and define_genpd_debugfs_fops()
  PM-runtime: Switch autosuspend over to using hrtimers
  cpufreq: qcom-hw: Add support for QCOM cpufreq HW driver
  dt-bindings: cpufreq: Introduce QCOM cpufreq firmware bindings
  ACPI: PM: Loop in full LPS0 mode only
  ACPI: EC / PM: Disable non-wakeup GPEs for suspend-to-idle
  tools/power/x86/intel_pstate_tracer: Fix non root execution for post processing a trace file
  tools/power turbostat: consolidate duplicate model numbers
  tools/power turbostat: fix goldmont C-state limit decoding
  PM / Domains: Propagate performance state updates
  PM / Domains: Factorize dev_pm_genpd_set_performance_state()
  PM / Domains: Save OPP table pointer in genpd
  OPP: Don't return 0 on error from of_get_required_opp_performance_state()
  OPP: Add dev_pm_opp_xlate_performance_state() helper
  OPP: Improve _find_table_of_opp_np()
  PM / Domains: Make genpd performance states orthogonal to the idlestates
  PM / sleep: convert to DEFINE_SHOW_ATTRIBUTE
  cpuidle: Add 'above' and 'below' idle state metrics
  PM / AVS: SmartReflex: Switch to SPDX Licence ID
  PM / AVS: SmartReflex: NULL check before some freeing functions is not needed
  ...

Diffstat:
MDocumentation/ABI/testing/sysfs-devices-system-cpu | 7+++++++
MDocumentation/admin-guide/kernel-parameters.txt | 3+++
ADocumentation/admin-guide/pm/cpuidle.rst | 631+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
MDocumentation/admin-guide/pm/intel_pstate.rst | 10+++++++++-
MDocumentation/admin-guide/pm/working-state.rst | 1+
DDocumentation/cpuidle/core.txt | 23-----------------------
DDocumentation/cpuidle/sysfs.txt | 98-------------------------------------------------------------------------------
ADocumentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt | 172+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Mdrivers/acpi/ec.c | 12++++++++++++
Mdrivers/acpi/internal.h | 2++
Mdrivers/acpi/sleep.c | 16++++++++++++++--
Mdrivers/base/power/domain.c | 343++++++++++++++++++++++++++++++++++++++++++++++---------------------------------
Mdrivers/base/power/runtime.c | 63++++++++++++++++++++++++++++++++++-----------------------------
Mdrivers/cpufreq/Kconfig.arm | 11+++++++++++
Mdrivers/cpufreq/Makefile | 1+
Mdrivers/cpufreq/cpufreq-nforce2.c | 3---
Mdrivers/cpufreq/ia64-acpi-cpufreq.c | 5-----
Mdrivers/cpufreq/imx6q-cpufreq.c | 17++++++-----------
Mdrivers/cpufreq/intel_pstate.c | 28++++++++++++++++++++++++++--
Mdrivers/cpufreq/pmac64-cpufreq.c | 1+
Mdrivers/cpufreq/powernv-cpufreq.c | 17+++++++++++------
Adrivers/cpufreq/qcom-cpufreq-hw.c | 308+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Mdrivers/cpufreq/s3c24xx-cpufreq-debugfs.c | 46++++++----------------------------------------
Mdrivers/cpuidle/cpuidle-big_little.c | 7++++++-
Mdrivers/cpuidle/cpuidle.c | 32+++++++++++++++++++++++++++++++-
Mdrivers/cpuidle/cpuidle.h | 1+
Mdrivers/cpuidle/governor.c | 9+++++++--
Mdrivers/cpuidle/poll_state.c | 11++++++++++-
Mdrivers/cpuidle/sysfs.c | 6++++++
Mdrivers/devfreq/devfreq.c | 153++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----------------
Mdrivers/opp/core.c | 347+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------
Mdrivers/opp/of.c | 339++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----------
Mdrivers/opp/opp.h | 26++++++++++++++++++++++++--
Mdrivers/power/avs/smartreflex.c | 39++-------------------------------------
Minclude/linux/cpuidle.h | 2++
Minclude/linux/devfreq.h | 13+++++++++++++
Minclude/linux/pm.h | 5+++--
Minclude/linux/pm_domain.h | 14++++++++++----
Minclude/linux/pm_opp.h | 23+++++++++++++++++++----
Minclude/linux/pm_runtime.h | 6+++---
Minclude/linux/power/smartreflex.h | 10+---------
Mkernel/power/main.c | 15++-------------
Mkernel/power/qos.c | 15++-------------
Mkernel/sched/cpufreq.c | 5+----
Mkernel/sched/cpufreq_schedutil.c | 5+----
Mtools/power/cpupower/Makefile | 6+++++-
Atools/power/cpupower/cpupower-completion.sh | 128+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Mtools/power/x86/intel_pstate_tracer/intel_pstate_tracer.py | 4++--
Mtools/power/x86/turbostat/turbostat.c | 189++++++++++++++++++++++++++++++++++++++++++++-----------------------------------
49 files changed, 2524 insertions(+), 704 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -145,6 +145,8 @@ What: /sys/devices/system/cpu/cpuX/cpuidle/stateN/name /sys/devices/system/cpu/cpuX/cpuidle/stateN/power /sys/devices/system/cpu/cpuX/cpuidle/stateN/time /sys/devices/system/cpu/cpuX/cpuidle/stateN/usage + /sys/devices/system/cpu/cpuX/cpuidle/stateN/above + /sys/devices/system/cpu/cpuX/cpuidle/stateN/below Date: September 2007 KernelVersion: v2.6.24 Contact: Linux power management list <linux-pm@vger.kernel.org> @@ -166,6 +168,11 @@ Description: usage: (RO) Number of times this state was entered (a count). + above: (RO) Number of times this state was entered, but the + observed CPU idle duration was too short for it (a count). + + below: (RO) Number of times this state was entered, but the + observed CPU idle duration was too long for it (a count). What: /sys/devices/system/cpu/cpuX/cpuidle/stateN/desc Date: February 2008 diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt @@ -674,6 +674,9 @@ cpuidle.off=1 [CPU_IDLE] disable the cpuidle sub-system + cpuidle.governor= + [CPU_IDLE] Name of the cpuidle governor to use. + cpufreq.off=1 [CPU_FREQ] disable the cpufreq sub-system diff --git a/Documentation/admin-guide/pm/cpuidle.rst b/Documentation/admin-guide/pm/cpuidle.rst @@ -0,0 +1,631 @@ +.. |struct cpuidle_state| replace:: :c:type:`struct cpuidle_state <cpuidle_state>` +.. |cpufreq| replace:: :doc:`CPU Performance Scaling <cpufreq>` + +======================== +CPU Idle Time Management +======================== + +:: + + Copyright (c) 2018 Intel Corp., Rafael J. Wysocki <rafael.j.wysocki@intel.com> + +Concepts +======== + +Modern processors are generally able to enter states in which the execution of +a program is suspended and instructions belonging to it are not fetched from +memory or executed. Those states are the *idle* states of the processor. + +Since part of the processor hardware is not used in idle states, entering them +generally allows power drawn by the processor to be reduced and, in consequence, +it is an opportunity to save energy. + +CPU idle time management is an energy-efficiency feature concerned about using +the idle states of processors for this purpose. + +Logical CPUs +------------ + +CPU idle time management operates on CPUs as seen by the *CPU scheduler* (that +is the part of the kernel responsible for the distribution of computational +work in the system). In its view, CPUs are *logical* units. That is, they need +not be separate physical entities and may just be interfaces appearing to +software as individual single-core processors. In other words, a CPU is an +entity which appears to be fetching instructions that belong to one sequence +(program) from memory and executing them, but it need not work this way +physically. Generally, three different cases can be consider here. + +First, if the whole processor can only follow one sequence of instructions (one +program) at a time, it is a CPU. In that case, if the hardware is asked to +enter an idle state, that applies to the processor as a whole. + +Second, if the processor is multi-core, each core in it is able to follow at +least one program at a time. The cores need not be entirely independent of each +other (for example, they may share caches), but still most of the time they +work physically in parallel with each other, so if each of them executes only +one program, those programs run mostly independently of each other at the same +time. The entire cores are CPUs in that case and if the hardware is asked to +enter an idle state, that applies to the core that asked for it in the first +place, but it also may apply to a larger unit (say a "package" or a "cluster") +that the core belongs to (in fact, it may apply to an entire hierarchy of larger +units containing the core). Namely, if all of the cores in the larger unit +except for one have been put into idle states at the "core level" and the +remaining core asks the processor to enter an idle state, that may trigger it +to put the whole larger unit into an idle state which also will affect the +other cores in that unit. + +Finally, each core in a multi-core processor may be able to follow more than one +program in the same time frame (that is, each core may be able to fetch +instructions from multiple locations in memory and execute them in the same time +frame, but not necessarily entirely in parallel with each other). In that case +the cores present themselves to software as "bundles" each consisting of +multiple individual single-core "processors", referred to as *hardware threads* +(or hyper-threads specifically on Intel hardware), that each can follow one +sequence of instructions. Then, the hardware threads are CPUs from the CPU idle +time management perspective and if the processor is asked to enter an idle state +by one of them, the hardware thread (or CPU) that asked for it is stopped, but +nothing more happens, unless all of the other hardware threads within the same +core also have asked the processor to enter an idle state. In that situation, +the core may be put into an idle state individually or a larger unit containing +it may be put into an idle state as a whole (if the other cores within the +larger unit are in idle states already). + +Idle CPUs +--------- + +Logical CPUs, simply referred to as "CPUs" in what follows, are regarded as +*idle* by the Linux kernel when there are no tasks to run on them except for the +special "idle" task. + +Tasks are the CPU scheduler's representation of work. Each task consists of a +sequence of instructions to execute, or code, data to be manipulated while +running that code, and some context information that needs to be loaded into the +processor every time the task's code is run by a CPU. The CPU scheduler +distributes work by assigning tasks to run to the CPUs present in the system. + +Tasks can be in various states. In particular, they are *runnable* if there are +no specific conditions preventing their code from being run by a CPU as long as +there is a CPU available for that (for example, they are not waiting for any +events to occur or similar). When a task becomes runnable, the CPU scheduler +assigns it to one of the available CPUs to run and if there are no more runnable +tasks assigned to it, the CPU will load the given task's context and run its +code (from the instruction following the last one executed so far, possibly by +another CPU). [If there are multiple runnable tasks assigned to one CPU +simultaneously, they will be subject to prioritization and time sharing in order +to allow them to make some progress over time.] + +The special "idle" task becomes runnable if there are no other runnable tasks +assigned to the given CPU and the CPU is then regarded as idle. In other words, +in Linux idle CPUs run the code of the "idle" task called *the idle loop*. That +code may cause the processor to be put into one of its idle states, if they are +supported, in order to save energy, but if the processor does not support any +idle states, or there is not enough time to spend in an idle state before the +next wakeup event, or there are strict latency constraints preventing any of the +available idle states from being used, the CPU will simply execute more or less +useless instructions in a loop until it is assigned a new task to run. + + +.. _idle-loop: + +The Idle Loop +============= + +The idle loop code takes two major steps in every iteration of it. First, it +calls into a code module referred to as the *governor* that belongs to the CPU +idle time management subsystem called ``CPUIdle`` to select an idle state for +the CPU to ask the hardware to enter. Second, it invokes another code module +from the ``CPUIdle`` subsystem, called the *driver*, to actually ask the +processor hardware to enter the idle state selected by the governor. + +The role of the governor is to find an idle state most suitable for the +conditions at hand. For this purpose, idle states that the hardware can be +asked to enter by logical CPUs are represented in an abstract way independent of +the platform or the processor architecture and organized in a one-dimensional +(linear) array. That array has to be prepared and supplied by the ``CPUIdle`` +driver matching the platform the kernel is running on at the initialization +time. This allows ``CPUIdle`` governors to be independent of the underlying +hardware and to work with any platforms that the Linux kernel can run on. + +Each idle state present in that array is characterized by two parameters to be +taken into account by the governor, the *target residency* and the (worst-case) +*exit latency*. The target residency is the minimum time the hardware must +spend in the given state, including the time needed to enter it (which may be +substantial), in order to save more energy than it would save by entering one of +the shallower idle states instead. [The "depth" of an idle state roughly +corresponds to the power drawn by the processor in that state.] The exit +latency, in turn, is the maximum time it will take a CPU asking the processor +hardware to enter an idle state to start executing the first instruction after a +wakeup from that state. Note that in general the exit latency also must cover +the time needed to enter the given state in case the wakeup occurs when the +hardware is entering it and it must be entered completely to be exited in an +ordered manner. + +There are two types of information that can influence the governor's decisions. +First of all, the governor knows the time until the closest timer event. That +time is known exactly, because the kernel programs timers and it knows exactly +when they will trigger, and it is the maximum time the hardware that the given +CPU depends on can spend in an idle state, including the time necessary to enter +and exit it. However, the CPU may be woken up by a non-timer event at any time +(in particular, before the closest timer triggers) and it generally is not known +when that may happen. The governor can only see how much time the CPU actually +was idle after it has been woken up (that time will be referred to as the *idle +duration* from now on) and it can use that information somehow along with the +time until the closest timer to estimate the idle duration in future. How the +governor uses that information depends on what algorithm is implemented by it +and that is the primary reason for having more than one governor in the +``CPUIdle`` subsystem. + +There are two ``CPUIdle`` governors available, ``menu`` and ``ladder``. Which +of them is used depends on the configuration of the kernel and in particular on +whether or not the scheduler tick can be `stopped by the idle +loop <idle-cpus-and-tick_>`_. It is possible to change the governor at run time +if the ``cpuidle_sysfs_switch`` command line parameter has been passed to the +kernel, but that is not safe in general, so it should not be done on production +systems (that may change in the future, though). The name of the ``CPUIdle`` +governor currently used by the kernel can be read from the +:file:`current_governor_ro` (or :file:`current_governor` if +``cpuidle_sysfs_switch`` is present in the kernel command line) file under +:file:`/sys/devices/system/cpu/cpuidle/` in ``sysfs``. + +Which ``CPUIdle`` driver is used, on the other hand, usually depends on the +platform the kernel is running on, but there are platforms with more than one +matching driver. For example, there are two drivers that can work with the +majority of Intel platforms, ``intel_idle`` and ``acpi_idle``, one with +hardcoded idle states information and the other able to read that information +from the system's ACPI tables, respectively. Still, even in those cases, the +driver chosen at the system initialization time cannot be replaced later, so the +decision on which one of them to use has to be made early (on Intel platforms +the ``acpi_idle`` driver will be used if ``intel_idle`` is disabled for some +reason or if it does not recognize the processor). The name of the ``CPUIdle`` +driver currently used by the kernel can be read from the :file:`current_driver` +file under :file:`/sys/devices/system/cpu/cpuidle/` in ``sysfs``. + + +.. _idle-cpus-and-tick: + +Idle CPUs and The Scheduler Tick +================================ + +The scheduler tick is a timer that triggers periodically in order to implement +the time sharing strategy of the CPU scheduler. Of course, if there are +multiple runnable tasks assigned to one CPU at the same time, the only way to +allow them to make reasonable progress in a given time frame is to make them +share the available CPU time. Namely, in rough approximation, each task is +given a slice of the CPU time to run its code, subject to the scheduling class, +prioritization and so on and when that time slice is used up, the CPU should be +switched over to running (the code of) another task. The currently running task +may not want to give the CPU away voluntarily, however, and the scheduler tick +is there to make the switch happen regardless. That is not the only role of the +tick, but it is the primary reason for using it. + +The scheduler tick is problematic from the CPU idle time management perspective, +because it triggers periodically and relatively often (depending on the kernel +configuration, the length of the tick period is between 1 ms and 10 ms). +Thus, if the tick is allowed to trigger on idle CPUs, it will not make sense +for them to ask the hardware to enter idle states with target residencies above +the tick period length. Moreover, in that case the idle duration of any CPU +will never exceed the tick period length and the energy used for entering and +exiting idle states due to the tick wakeups on idle CPUs will be wasted. + +Fortunately, it is not really necessary to allow the tick to trigger on idle +CPUs, because (by definition) they have no tasks to run except for the special +"idle" one. In other words, from the CPU scheduler perspective, the only user +of the CPU time on them is the idle loop. Since the time of an idle CPU need +not be shared between multiple runnable tasks, the primary reason for using the +tick goes away if the given CPU is idle. Consequently, it is possible to stop +the scheduler tick entirely on idle CPUs in principle, even though that may not +always be worth the effort. + +Whether or not it makes sense to stop the scheduler tick in the idle loop +depends on what is expected by the governor. First, if there is another +(non-tick) timer due to trigger within the tick range, stopping the tick clearly +would be a waste of time, even though the timer hardware may not need to be +reprogrammed in that case. Second, if the governor is expecting a non-timer +wakeup within the tick range, stopping the tick is not necessary and it may even +be harmful. Namely, in that case the governor will select an idle state with +the target residency within the time until the expected wakeup, so that state is +going to be relatively shallow. The governor really cannot select a deep idle +state then, as that would contradict its own expectation of a wakeup in short +order. Now, if the wakeup really occurs shortly, stopping the tick would be a +waste of time and in this case the timer hardware would need to be reprogrammed, +which is expensive. On the other hand, if the tick is stopped and the wakeup +does not occur any time soon, the hardware may spend indefinite amount of time +in the shallow idle state selected by the governor, which will be a waste of +energy. Hence, if the governor is expecting a wakeup of any kind within the +tick range, it is better to allow the tick trigger. Otherwise, however, the +governor will select a relatively deep idle state, so the tick should be stopped +so that it does not wake up the CPU too early. + +In any case, the governor knows what it is expecting and the decision on whether +or not to stop the scheduler tick belongs to it. Still, if the tick has been +stopped already (in one of the previous iterations of the loop), it is better +to leave it as is and the governor needs to take that into account. + +The kernel can be configured to disable stopping the scheduler tick in the idle +loop altogether. That can be done through the build-time configuration of it +(by unsetting the ``CONFIG_NO_HZ_IDLE`` configuration option) or by passing +``nohz=off`` to it in the command line. In both cases, as the stopping of the +scheduler tick is disabled, the governor's decisions regarding it are simply +ignored by the idle loop code and the tick is never stopped. + +The systems that run kernels configured to allow the scheduler tick to be +stopped on idle CPUs are referred to as *tickless* systems and they are +generally regarded as more energy-efficient than the systems running kernels in +which the tick cannot be stopped. If the given system is tickless, it will use +the ``menu`` governor by default and if it is not tickless, the default +``CPUIdle`` governor on it will be ``ladder``. + + +The ``menu`` Governor +===================== + +The ``menu`` governor is the default ``CPUIdle`` governor for tickless systems. +It is quite complex, but the basic principle of its design is straightforward. +Namely, when invoked to select an idle state for a CPU (i.e. an idle state that +the CPU will ask the processor hardware to enter), it attempts to predict the +idle duration and uses the predicted value for idle state selection. + +It first obtains the time until the closest timer event with the assumption +that the scheduler tick will be stopped. That time, referred to as the *sleep +length* in what follows, is the upper bound on the time before the next CPU +wakeup. It is used to determine the sleep length range, which in turn is needed +to get the sleep length correction factor. + +The ``menu`` governor maintains two arrays of sleep length correction factors. +One of them is used when tasks previously running on the given CPU are waiting +for some I/O operations to complete and the other one is used when that is not +the case. Each array contains several correction factor values that correspond +to different sleep length ranges organized so that each range represented in the +array is approximately 10 times wider than the previous one. + +The correction factor for the given sleep length range (determined before +selecting the idle state for the CPU) is updated after the CPU has been woken +up and the closer the sleep length is to the observed idle duration, the closer +to 1 the correction factor becomes (it must fall between 0 and 1 inclusive). +The sleep length is multiplied by the correction factor for the range that it +falls into to obtain the first approximation of the predicted idle duration. + +Next, the governor uses a simple pattern recognition algorithm to refine its +idle duration prediction. Namely, it saves the last 8 observed idle duration +values and, when predicting the idle duration next time, it computes the average +and variance of them. If the variance is small (smaller than 400 square +milliseconds) or it is small relative to the average (the average is greater +that 6 times the standard deviation), the average is regarded as the "typical +interval" value. Otherwise, the longest of the saved observed idle duration +values is discarded and the computation is repeated for the remaining ones. +Again, if the variance of them is small (in the above sense), the average is +taken as the "typical interval" value and so on, until either the "typical +interval" is determined or too many data points are disregarded, in which case +the "typical interval" is assumed to equal "infinity" (the maximum unsigned +integer value). The "typical interval" computed this way is compared with the +sleep length multiplied by the correction factor and the minimum of the two is +taken as the predicted idle duration. + +Then, the governor computes an extra latency limit to help "interactive" +workloads. It uses the observation that if the exit latency of the selected +idle state is comparable with the predicted idle duration, the total time spent +in that state probably will be very short and the amount of energy to save by +entering it will be relatively small, so likely it is better to avoid the +overhead related to entering that state and exiting it. Thus selecting a +shallower state is likely to be a better option then. The first approximation +of the extra latency limit is the predicted idle duration itself which +additionally is divided by a value depending on the number of tasks that +previously ran on the given CPU and now they are waiting for I/O operations to +complete. The result of that division is compared with the latency limit coming +from the power management quality of service, or `PM QoS <cpu-pm-qos_>`_, +framework and the minimum of the two is taken as the limit for the idle states' +exit latency. + +Now, the governor is ready to walk the list of idle states and choose one of +them. For this purpose, it compares the target residency of each state with +the predicted idle duration and the exit latency of it with the computed latency +limit. It selects the state with the target residency closest to the predicted +idle duration, but still below it, and exit latency that does not exceed the +limit. + +In the final step the governor may still need to refine the idle state selection +if it has not decided to `stop the scheduler tick <idle-cpus-and-tick_>`_. That +happens if the idle duration predicted by it is less than the tick period and +the tick has not been stopped already (in a previous iteration of the idle +loop). Then, the sleep length used in the previous computations may not reflect +the real time until the closest timer event and if it really is greater than +that time, the governor may need to select a shallower state with a suitable +target residency. + + +.. _idle-states-representation: + +Representation of Idle States +============================= + +For the CPU idle time management purposes all of the physical idle states +supported by the processor have to be represented as a one-dimensional array of +|struct cpuidle_state| objects each allowing an individual (logical) CPU to ask +the processor hardware to enter an idle state of certain properties. If there +is a hierarchy of units in the processor, one |struct cpuidle_state| object can +cover a combination of idle states supported by the units at different levels of +the hierarchy. In that case, the `target residency and exit latency parameters +of it <idle-loop_>`_, must reflect the properties of the idle state at the +deepest level (i.e. the idle state of the unit containing all of the other +units). + +For example, take a processor with two cores in a larger unit referred to as +a "module" and suppose that asking the hardware to enter a specific idle state +(say "X") at the "core" level by one core will trigger the module to try to +enter a specific idle state of its own (say "MX") if the other core is in idle +state "X" already. In other words, asking for idle state "X" at the "core" +level gives the hardware a license to go as deep as to idle state "MX" at the +"module" level, but there is no guarantee that this is going to happen (the core +asking for idle state "X" may just end up in that state by itself instead). +Then, the target residency of the |struct cpuidle_state| object representing +idle state "X" must reflect the minimum time to spend in idle state "MX" of +the module (including the time needed to enter it), because that is the minimum +time the CPU needs to be idle to save any energy in case the hardware enters +that state. Analogously, the exit latency parameter of that object must cover +the exit time of idle state "MX" of the module (and usually its entry time too), +because that is the maximum delay between a wakeup signal and the time the CPU +will start to execute the first new instruction (assuming that both cores in the +module will always be ready to execute instructions as soon as the module +becomes operational as a whole). + +There are processors without direct coordination between different levels of the +hierarchy of units inside them, however. In those cases asking for an idle +state at the "core" level does not automatically affect the "module" level, for +example, in any way and the ``CPUIdle`` driver is responsible for the entire +handling of the hierarchy. Then, the definition of the idle state objects is +entirely up to the driver, but still the physical properties of the idle state +that the processor hardware finally goes into must always follow the parameters +used by the governor for idle state selection (for instance, the actual exit +latency of that idle state must not exceed the exit latency parameter of the +idle state object selected by the governor). + +In addition to the target residency and exit latency idle state parameters +discussed above, the objects representing idle states each contain a few other +parameters describing the idle state and a pointer to the function to run in +order to ask the hardware to enter that state. Also, for each +|struct cpuidle_state| object, there is a corresponding +:c:type:`struct cpuidle_state_usage <cpuidle_state_usage>` one containing usage +statistics of the given idle state. That information is exposed by the kernel +via ``sysfs``. + +For each CPU in the system, there is a :file:`/sys/devices/system/cpu<N>/cpuidle/` +directory in ``sysfs``, where the number ``<N>`` is assigned to the given +CPU at the initialization time. That directory contains a set of subdirectories +called :file:`state0`, :file:`state1` and so on, up to the number of idle state +objects defined for the given CPU minus one. Each of these directories +corresponds to one idle state object and the larger the number in its name, the +deeper the (effective) idle state represented by it. Each of them contains +a number of files (attributes) representing the properties of the idle state +object corresponding to it, as follows: + +``above`` + Total number of times this idle state had been asked for, but the + observed idle duration was certainly too short to match its target + residency. + +``below`` + Total number of times this idle state had been asked for, but cerainly + a deeper idle state would have been a better match for the observed idle + duration. + +``desc`` + Description of the idle state. + +``disable`` + Whether or not this idle state is disabled. + +``latency`` + Exit latency of the idle state in microseconds. + +``name`` + Name of the idle state. + +``power`` + Power drawn by hardware in this idle state in milliwatts (if specified, + 0 otherwise). + +``residency`` + Target residency of the idle state in microseconds. + +``time`` + Total time spent in this idle state by the given CPU (as measured by the + kernel) in microseconds. + +``usage`` + Total number of times the hardware has been asked by the given CPU to + enter this idle state. + +The :file:`desc` and :file:`name` files both contain strings. The difference +between them is that the name is expected to be more concise, while the +description may be longer and it may contain white space or special characters. +The other files listed above contain integer numbers. + +The :file:`disable` attribute is the only writeable one. If it contains 1, the +given idle state is disabled for this particular CPU, which means that the +governor will never select it for this particular CPU and the ``CPUIdle`` +driver will never ask the hardware to enter it for that CPU as a result. +However, disabling an idle state for one CPU does not prevent it from being +asked for by the other CPUs, so it must be disabled for all of them in order to +never be asked for by any of them. [Note that, due to the way the ``ladder`` +governor is implemented, disabling an idle state prevents that governor from +selecting any idle states deeper than the disabled one too.] + +If the :file:`disable` attribute contains 0, the given idle state is enabled for +this particular CPU, but it still may be disabled for some or all of the other +CPUs in the system at the same time. Writing 1 to it causes the idle state to +be disabled for this particular CPU and writing 0 to it allows the governor to +take it into consideration for the given CPU and the driver to ask for it, +unless that state was disabled globally in the driver (in which case it cannot +be used at all). + +The :file:`power` attribute is not defined very well, especially for idle state +objects representing combinations of idle states at different levels of the +hierarchy of units in the processor, and it generally is hard to obtain idle +state power numbers for complex hardware, so :file:`power` often contains 0 (not +available) and if it contains a nonzero number, that number may not be very +accurate and it should not be relied on for anything meaningful. + +The number in the :file:`time` file generally may be greater than the total time +really spent by the given CPU in the given idle state, because it is measured by +the kernel and it may not cover the cases in which the hardware refused to enter +this idle state and entered a shallower one instead of it (or even it did not +enter any idle state at all). The kernel can only measure the time span between +asking the hardware to enter an idle state and the subsequent wakeup of the CPU +and it cannot say what really happened in the meantime at the hardware level. +Moreover, if the idle state object in question represents a combination of idle +states at different levels of the hierarchy of units in the processor, +the kernel can never say how deep the hardware went down the hierarchy in any +particular case. For these reasons, the only reliable way to find out how +much time has been spent by the hardware in different idle states supported by +it is to use idle state residency counters in the hardware, if available. + + +.. _cpu-pm-qos: + +Power Management Quality of Service for CPUs +============================================ + +The power management quality of service (PM QoS) framework in the Linux kernel +allows kernel code and user space processes to set constraints on various +energy-efficiency features of the kernel to prevent performance from dropping +below a required level. The PM QoS constraints can be set globally, in +predefined categories referred to as PM QoS classes, or against individual +devices. + +CPU idle time management can be affected by PM QoS in two ways, through the +global constraint in the ``PM_QOS_CPU_DMA_LATENCY`` class and through the +resume latency constraints for individual CPUs. Kernel code (e.g. device +drivers) can set both of them with the help of special internal interfaces +provided by the PM QoS framework. User space can modify the former by opening +the :file:`cpu_dma_latency` special device file under :file:`/dev/` and writing +a binary value (interpreted as a signed 32-bit integer) to it. In turn, the +resume latency constraint for a CPU can be modified by user space by writing a +string (representing a signed 32-bit integer) to the +:file:`power/pm_qos_resume_latency_us` file under +:file:`/sys/devices/system/cpu/cpu<N>/` in ``sysfs``, where the CPU number +``<N>`` is allocated at the system initialization time. Negative values +will be rejected in both cases and, also in both cases, the written integer +number will be interpreted as a requested PM QoS constraint in microseconds. + +The requested value is not automatically applied as a new constraint, however, +as it may be less restrictive (greater in this particular case) than another +constraint previously requested by someone else. For this reason, the PM QoS +framework maintains a list of requests that have been made so far in each +global class and for each device, aggregates them and applies the effective +(minimum in this particular case) value as the new constraint. + +In fact, opening the :file:`cpu_dma_latency` special device file causes a new +PM QoS request to be created and added to the priority list of requests in the +``PM_QOS_CPU_DMA_LATENCY`` class and the file descriptor coming from the +"open" operation represents that request. If that file descriptor is then +used for writing, the number written to it will be associated with the PM QoS +request represented by it as a new requested constraint value. Next, the +priority list mechanism will be used to determine the new effective value of +the entire list of requests and that effective value will be set as a new +constraint. Thus setting a new requested constraint value will only change the +real constraint if the effective "list" value is affected by it. In particular, +for the ``PM_QOS_CPU_DMA_LATENCY`` class it only affects the real constraint if +it is the minimum of the requested constraints in the list. The process holding +a file descriptor obtained by opening the :file:`cpu_dma_latency` special device +file controls the PM QoS request associated with that file descriptor, but it +controls this particular PM QoS request only. + +Closing the :file:`cpu_dma_latency` special device file or, more precisely, the +file descriptor obtained while opening it, causes the PM QoS request associated +with that file descriptor to be removed from the ``PM_QOS_CPU_DMA_LATENCY`` +class priority list and destroyed. If that happens, the priority list mechanism +will be used, again, to determine the new effective value for the whole list +and that value will become the new real constraint. + +In turn, for each CPU there is only one resume latency PM QoS request +associated with the :file:`power/pm_qos_resume_latency_us` file under +:file:`/sys/devices/system/cpu/cpu<N>/` in ``sysfs`` and writing to it causes +this single PM QoS request to be updated regardless of which user space +process does that. In other words, this PM QoS request is shared by the entire +user space, so access to the file associated with it needs to be arbitrated +to avoid confusion. [Arguably, the only legitimate use of this mechanism in +practice is to pin a process to the CPU in question and let it use the +``sysfs`` interface to control the resume latency constraint for it.] It +still only is a request, however. It is a member of a priority list used to +determine the effective value to be set as the resume latency constraint for the +CPU in question every time the list of requests is updated this way or another +(there may be other requests coming from kernel code in that list). + +CPU idle time governors are expected to regard the minimum of the global +effective ``PM_QOS_CPU_DMA_LATENCY`` class constraint and the effective +resume latency constraint for the given CPU as the upper limit for the exit +latency of the idle states they can select for that CPU. They should never +select any idle states with exit latency beyond that limit. + + +Idle States Control Via Kernel Command Line +=========================================== + +In addition to the ``sysfs`` interface allowing individual idle states to be +`disabled for individual CPUs <idle-states-representation_>`_, there are kernel +command line parameters affecting CPU idle time management. + +The ``cpuidle.off=1`` kernel command line option can be used to disable the +CPU idle time management entirely. It does not prevent the idle loop from +running on idle CPUs, but it prevents the CPU idle time governors and drivers +from being invoked. If it is added to the kernel command line, the idle loop +will ask the hardware to enter idle states on idle CPUs via the CPU architecture +support code that is expected to provide a default mechanism for this purpose. +That default mechanism usually is the least common denominator for all of the +processors implementing the architecture (i.e. CPU instruction set) in question, +however, so it is rather crude and not very energy-efficient. For this reason, +it is not recommended for production use. + +The ``cpuidle.governor=`` kernel command line switch allows the ``CPUIdle`` +governor to use to be specified. It has to be appended with a string matching +the name of an available governor (e.g. ``cpuidle.governor=menu``) and that +governor will be used instead of the default one. It is possible to force +the ``menu`` governor to be used on the systems that use the ``ladder`` governor +by default this way, for example. + +The other kernel command line parameters controlling CPU idle time management +described below are only relevant for the *x86* architecture and some of +them affect Intel processors only. + +The *x86* architecture support code recognizes three kernel command line +options related to CPU idle time management: ``idle=poll``, ``idle=halt``, +and ``idle=nomwait``. The first two of them disable the ``acpi_idle`` and +``intel_idle`` drivers altogether, which effectively causes the entire +``CPUIdle`` subsystem to be disabled and makes the idle loop invoke the +architecture support code to deal with idle CPUs. How it does that depends on +which of the two parameters is added to the kernel command line. In the +``idle=halt`` case, the architecture support code will use the ``HLT`` +instruction of the CPUs (which, as a rule, suspends the execution of the program +and causes the hardware to attempt to enter the shallowest available idle state) +for this purpose, and if ``idle=poll`` is used, idle CPUs will execute a +more or less ``lightweight'' sequence of instructions in a tight loop. [Note +that using ``idle=poll`` is somewhat drastic in many cases, as preventing idle +CPUs from saving almost any energy at all may not be the only effect of it. +For example, on Intel hardware it effectively prevents CPUs from using +P-states (see |cpufreq|) that require any number of CPUs in a package to be +idle, so it very well may hurt single-thread computations performance as well as +energy-efficiency. Thus using it for performance reasons may not be a good idea +at all.] + +The ``idle=nomwait`` option disables the ``intel_idle`` driver and causes +``acpi_idle`` to be used (as long as all of the information needed by it is +there in the system's ACPI tables), but it is not allowed to use the +``MWAIT`` instruction of the CPUs to ask the hardware to enter idle states. + +In addition to the architecture-level kernel command line options affecting CPU +idle time management, there are parameters affecting individual ``CPUIdle`` +drivers that can be passed to them via the kernel command line. Specifically, +the ``intel_idle.max_cstate=<n>`` and ``processor.max_cstate=<n>`` parameters, +where ``<n>`` is an idle state index also used in the name of the given +state's directory in ``sysfs`` (see +`Representation of Idle States <idle-states-representation_>`_), causes the +``intel_idle`` and ``acpi_idle`` drivers, respectively, to discard all of the +idle states deeper than idle state ``<n>``. In that case, they will never ask +for any of those idle states or expose them to the governor. [The behavior of +the two drivers is different for ``<n>`` equal to ``0``. Adding +``intel_idle.max_cstate=0`` to the kernel command line disables the +``intel_idle`` driver and allows ``acpi_idle`` to be used, whereas +``processor.max_cstate=0`` is equivalent to ``processor.max_cstate=1``. +Also, the ``acpi_idle`` driver is part of the ``processor`` kernel module that +can be loaded separately and ``max_cstate=<n>`` can be passed to it as a module +parameter when it is loaded.] diff --git a/Documentation/admin-guide/pm/intel_pstate.rst b/Documentation/admin-guide/pm/intel_pstate.rst @@ -495,7 +495,15 @@ on the following rules, regardless of the current operation mode of the driver: 2. Each individual CPU is affected by its own per-policy limits (that is, it cannot be requested to run faster than its own per-policy maximum and it - cannot be requested to run slower than its own per-policy minimum). + cannot be requested to run slower than its own per-policy minimum). The + effective performance depends on whether the platform supports per core + P-states, hyper-threading is enabled and on current performance requests + from other CPUs. When platform doesn't support per core P-states, the + effective performance can be more than the policy limits set on a CPU, if + other CPUs are requesting higher performance at that moment. Even with per + core P-states support, when hyper-threading is enabled, if the sibling CPU + is requesting higher performance, the other siblings will get higher + performance than their policy limits. 3. The global and per-policy limits can be set independently. diff --git a/Documentation/admin-guide/pm/working-state.rst b/Documentation/admin-guide/pm/working-state.rst @@ -5,5 +5,6 @@ Working-State Power Management .. toctree:: :maxdepth: 2 + cpuidle cpufreq intel_pstate diff --git a/Documentation/cpuidle/core.txt b/Documentation/cpuidle/core.txt @@ -1,23 +0,0 @@ - - Supporting multiple CPU idle levels in kernel - - cpuidle - -General Information: - -Various CPUs today support multiple idle levels that are differentiated -by varying exit latencies and power consumption during idle. -cpuidle is a generic in-kernel infrastructure that separates -idle policy (governor) from idle mechanism (driver) and provides a -standardized infrastructure to support independent development of -governors and drivers. - -cpuidle resides under drivers/cpuidle. - -Boot options: -"cpuidle_sysfs_switch" -enables current_governor interface in /sys/devices/system/cpu/cpuidle/, -which can be used to switch governors at run time. This boot option -is meant for developer testing only. In normal usage, kernel picks the -best governor based on governor ratings. -SEE ALSO: sysfs.txt in this directory. diff --git a/Documentation/cpuidle/sysfs.txt b/Documentation/cpuidle/sysfs.txt @@ -1,98 +0,0 @@ - - - Supporting multiple CPU idle levels in kernel - - cpuidle sysfs - -System global cpuidle related information and tunables are under -/sys/devices/system/cpu/cpuidle - -The current interfaces in this directory has self-explanatory names: -* current_driver -* current_governor_ro - -With cpuidle_sysfs_switch boot option (meant for developer testing) -following objects are visible instead. -* current_driver -* available_governors -* current_governor -In this case users can switch the governor at run time by writing -to current_governor. - - -Per logical CPU specific cpuidle information are under -/sys/devices/system/cpu/cpuX/cpuidle -for each online cpu X - --------------------------------------------------------------------------------- -# ls -lR /sys/devices/system/cpu/cpu0/cpuidle/ -/sys/devices/system/cpu/cpu0/cpuidle/: -total 0 -drwxr-xr-x 2 root root 0 Feb 8 10:42 state0 -drwxr-xr-x 2 root root 0 Feb 8 10:42 state1 -drwxr-xr-x 2 root root 0 Feb 8 10:42 state2 -drwxr-xr-x 2 root root 0 Feb 8 10:42 state3 - -/sys/devices/system/cpu/cpu0/cpuidle/state0: -total 0 --r--r--r-- 1 root root 4096 Feb 8 10:42 desc --rw-r--r-- 1 root root 4096 Feb 8 10:42 disable --r--r--r-- 1 root root 4096 Feb 8 10:42 latency --r--r--r-- 1 root root 4096 Feb 8 10:42 name --r--r--r-- 1 root root 4096 Feb 8 10:42 power --r--r--r-- 1 root root 4096 Feb 8 10:42 residency --r--r--r-- 1 root root 4096 Feb 8 10:42 time --r--r--r-- 1 root root 4096 Feb 8 10:42 usage - -/sys/devices/system/cpu/cpu0/cpuidle/state1: -total 0 --r--r--r-- 1 root root 4096 Feb 8 10:42 desc --rw-r--r-- 1 root root 4096 Feb 8 10:42 disable --r--r--r-- 1 root root 4096 Feb 8 10:42 latency --r--r--r-- 1 root root 4096 Feb 8 10:42 name --r--r--r-- 1 root root 4096 Feb 8 10:42 power --r--r--r-- 1 root root 4096 Feb 8 10:42 residency --r--r--r-- 1 root root 4096 Feb 8 10:42 time --r--r--r-- 1 root root 4096 Feb 8 10:42 usage - -/sys/devices/system/cpu/cpu0/cpuidle/state2: -total 0 --r--r--r-- 1 root root 4096 Feb 8 10:42 desc --rw-r--r-- 1 root root 4096 Feb 8 10:42 disable --r--r--r-- 1 root root 4096 Feb 8 10:42 latency --r--r--r-- 1 root root 4096 Feb 8 10:42 name --r--r--r-- 1 root root 4096 Feb 8 10:42 power --r--r--r-- 1 root root 4096 Feb 8 10:42 residency --r--r--r-- 1 root root 4096 Feb 8 10:42 time --r--r--r-- 1 root root 4096 Feb 8 10:42 usage - -/sys/devices/system/cpu/cpu0/cpuidle/state3: -total 0 --r--r--r-- 1 root root 4096 Feb 8 10:42 desc --rw-r--r-- 1 root root 4096 Feb 8 10:42 disable --r--r--r-- 1 root root 4096 Feb 8 10:42 latency --r--r--r-- 1 root root 4096 Feb 8 10:42 name --r--r--r-- 1 root root 4096 Feb 8 10:42 power --r--r--r-- 1 root root 4096 Feb 8 10:42 residency --r--r--r-- 1 root root 4096 Feb 8 10:42 time --r--r--r-- 1 root root 4096 Feb 8 10:42 usage --------------------------------------------------------------------------------- - - -* desc : Small description about the idle state (string) -* disable : Option to disable this idle state (bool) -> see note below -* latency : Latency to exit out of this idle state (in microseconds) -* residency : Time after which a state becomes more effecient than any - shallower state (in microseconds) -* name : Name of the idle state (string) -* power : Power consumed while in this idle state (in milliwatts) -* time : Total time spent in this idle state (in microseconds) -* usage : Number of times this state was entered (count) - -Note: -The behavior and the effect of the disable variable depends on the -implementation of a particular governor. In the ladder governor, for -example, it is not coherent, i.e. if one is disabling a light state, -then all deeper states are disabled as well, but the disable variable -does not reflect it. Likewise, if one enables a deep state but a lighter -state still is disabled, then this has no effect. diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt @@ -0,0 +1,172 @@ +Qualcomm Technologies, Inc. CPUFREQ Bindings + +CPUFREQ HW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI) +SoCs to manage frequency in hardware. It is capable of controlling frequency +for multiple clusters. + +Properties: +- compatible + Usage: required + Value type: <string> + Definition: must be "qcom,cpufreq-hw". + +- clocks + Usage: required + Value type: <phandle> From common clock binding. + Definition: clock handle for XO clock and GPLL0 clock. + +- clock-names + Usage: required + Value type: <string> From common clock binding. + Definition: must be "xo", "alternate". + +- reg + Usage: required + Value type: <prop-encoded-array> + Definition: Addresses and sizes for the memory of the HW bases in + each frequency domain. +- reg-names + Usage: Optional + Value type: <string> + Definition: Frequency domain name i.e. + "freq-domain0", "freq-domain1". + +- #freq-domain-cells: + Usage: required. + Definition: Number of cells in a freqency domain specifier. + +* Property qcom,freq-domain +Devices supporting freq-domain must set their "qcom,freq-domain" property with +phandle to a cpufreq_hw followed by the Domain ID(0/1) in the CPU DT node. + + +Example: + +Example 1: Dual-cluster, Quad-core per cluster. CPUs within a cluster switch +DCVS state together. + +/ { + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&L2_100>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x200>; + enable-method = "psci"; + next-level-cache = <&L2_200>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x300>; + enable-method = "psci"; + next-level-cache = <&L2_300>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x400>; + enable-method = "psci"; + next-level-cache = <&L2_400>; + qcom,freq-domain = <&cpufreq_hw 1>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x500>; + enable-method = "psci"; + next-level-cache = <&L2_500>; + qcom,freq-domain = <&cpufreq_hw 1>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x600>; + enable-method = "psci"; + next-level-cache = <&L2_600>; + qcom,freq-domain = <&cpufreq_hw 1>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x700>; + enable-method = "psci"; + next-level-cache = <&L2_700>; + qcom,freq-domain = <&cpufreq_hw 1>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + }; + + soc { + cpufreq_hw: cpufreq@17d43000 { + compatible = "qcom,cpufreq-hw"; + reg = <0x17d43000 0x1400>, <0x17d45800 0x1400>; + reg-names = "freq-domain0", "freq-domain1"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + }; +} diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c @@ -1034,6 +1034,18 @@ void acpi_ec_unblock_transactions(void) acpi_ec_start(first_ec, true); } +void acpi_ec_mark_gpe_for_wake(void) +{ + if (first_ec && !ec_no_wakeup) + acpi_mark_gpe_for_wake(NULL, first_ec->gpe); +} + +void acpi_ec_set_gpe_wake_mask(u8 action) +{ + if (first_ec && !ec_no_wakeup) + acpi_set_gpe_wake_mask(NULL, first_ec->gpe, action); +} + void acpi_ec_dispatch_gpe(void) { if (first_ec) diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h @@ -188,6 +188,8 @@ int acpi_ec_ecdt_probe(void); int acpi_ec_dsdt_probe(void); void acpi_ec_block_transactions(void); void acpi_ec_unblock_transactions(void); +void acpi_ec_mark_gpe_for_wake(void); +void acpi_ec_set_gpe_wake_mask(u8 action); void acpi_ec_dispatch_gpe(void); int acpi_ec_add_query_handler(struct acpi_ec *ec, u8 query_bit, acpi_handle handle, acpi_ec_query_func func, diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c @@ -940,6 +940,8 @@ static int lps0_device_attach(struct acpi_device *adev, acpi_handle_debug(adev->handle, "_DSM function mask: 0x%x\n", bitmask); + + acpi_ec_mark_gpe_for_wake(); } else { acpi_handle_debug(adev->handle, "_DSM function 0 evaluation failed\n"); @@ -968,16 +970,23 @@ static int acpi_s2idle_prepare(void) if (lps0_device_handle) { acpi_sleep_run_lps0_dsm(ACPI_LPS0_SCREEN_OFF); acpi_sleep_run_lps0_dsm(ACPI_LPS0_ENTRY); + + acpi_ec_set_gpe_wake_mask(ACPI_GPE_ENABLE); } if (acpi_sci_irq_valid()) enable_irq_wake(acpi_sci_irq); + /* Change the configuration of GPEs to avoid spurious wakeup. */ + acpi_enable_all_wakeup_gpes(); + acpi_os_wait_events_complete(); return 0; } static void acpi_s2idle_wake(void) { + if (!lps0_device_handle) + return; if (pm_debug_messages_on) lpi_check_constraints(); @@ -996,8 +1005,7 @@ static void acpi_s2idle_wake(void) * takes too much time for EC wakeup events to survive, so look * for them now. */ - if (lps0_device_handle) - acpi_ec_dispatch_gpe(); + acpi_ec_dispatch_gpe(); } } @@ -1017,10 +1025,14 @@ static void acpi_s2idle_sync(void) static void acpi_s2idle_restore(void) { + acpi_enable_all_runtime_gpes(); + if (acpi_sci_irq_valid()) disable_irq_wake(acpi_sci_irq); if (lps0_device_handle) { + acpi_ec_set_gpe_wake_mask(ACPI_GPE_DISABLE); + acpi_sleep_run_lps0_dsm(ACPI_LPS0_EXIT); acpi_sleep_run_lps0_dsm(ACPI_LPS0_SCREEN_ON); } diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c @@ -239,6 +239,127 @@ static void genpd_update_accounting(struct generic_pm_domain *genpd) static inline void genpd_update_accounting(struct generic_pm_domain *genpd) {} #endif +static int _genpd_reeval_performance_state(struct generic_pm_domain *genpd, + unsigned int state) +{ + struct generic_pm_domain_data *pd_data; + struct pm_domain_data *pdd; + struct gpd_link *link; + + /* New requested state is same as Max requested state */ + if (state == genpd->performance_state) + return state; + + /* New requested state is higher than Max requested state */ + if (state > genpd->performance_state) + return state; + + /* Traverse all devices within the domain */ + list_for_each_entry(pdd, &genpd->dev_list, list_node) { + pd_data = to_gpd_data(pdd); + + if (pd_data->performance_state > state) + state = pd_data->performance_state; + } + + /* + * Traverse all sub-domains within the domain. This can be + * done without any additional locking as the link->performance_state + * field is protected by the master genpd->lock, which is already taken. + * + * Also note that link->performance_state (subdomain's performance state + * requirement to master domain) is different from + * link->slave->performance_state (current performance state requirement + * of the devices/sub-domains of the subdomain) and so can have a + * different value. + * + * Note that we also take vote from powered-off sub-domains into account + * as the same is done for devices right now. + */ + list_for_each_entry(link, &genpd->master_links, master_node) { + if (link->performance_state > state) + state = link->performance_state; + } + + return state; +} + +static int _genpd_set_performance_state(struct generic_pm_domain *genpd, + unsigned int state, int depth) +{ + struct generic_pm_domain *master; + struct gpd_link *link; + int master_state, ret; + + if (state == genpd->performance_state) + return 0; + + /* Propagate to masters of genpd */ + list_for_each_entry(link, &genpd->slave_links, slave_node) { + master = link->master; + + if (!master->set_performance_state) + continue; + + /* Find master's performance state */ + ret = dev_pm_opp_xlate_performance_state(genpd->opp_table, + master->opp_table, + state); + if (unlikely(ret < 0)) + goto err; + + master_state = ret; + + genpd_lock_nested(master, depth + 1); + + link->prev_performance_state = link->performance_state; + link->performance_state = master_state; + master_state = _genpd_reeval_performance_state(master, + master_state); + ret = _genpd_set_performance_state(master, master_state, depth + 1); + if (ret) + link->performance_state = link->prev_performance_state; + + genpd_unlock(master); + + if (ret) + goto err; + } + + ret = genpd->set_performance_state(genpd, state); + if (ret) + goto err; + + genpd->performance_state = state; + return 0; + +err: + /* Encountered an error, lets rollback */ + list_for_each_entry_continue_reverse(link, &genpd->slave_links, + slave_node) { + master = link->master; + + if (!master->set_performance_state) + continue; + + genpd_lock_nested(master, depth + 1); + + master_state = link->prev_performance_state; + link->performance_state = master_state; + + master_state = _genpd_reeval_performance_state(master, + master_state); + if (_genpd_set_performance_state(master, master_state, depth + 1)) { + pr_err("%s: Failed to roll back to %d performance state\n", + master->name, master_state); + } + + genpd_unlock(master); + } + + return ret; +} + /** * dev_pm_genpd_set_performance_state- Set performance state of device's power * domain. @@ -257,10 +378,9 @@ static inline void genpd_update_accounting(struct generic_pm_domain *genpd) {} int dev_pm_genpd_set_performance_state(struct device *dev, unsigned int state) { struct generic_pm_domain *genpd; - struct generic_pm_domain_data *gpd_data, *pd_data; - struct pm_domain_data *pdd; + struct generic_pm_domain_data *gpd_data; unsigned int prev; - int ret = 0; + int ret; genpd = dev_to_genpd(dev); if (IS_ERR(genpd)) @@ -281,47 +401,11 @@ int dev_pm_genpd_set_performance_state(struct device *dev, unsigned int state) prev = gpd_data->performance_state; gpd_data->performance_state = state; - /* New requested state is same as Max requested state */ - if (state == genpd->performance_state) - goto unlock; - - /* New requested state is higher than Max requested state */ - if (state > genpd->performance_state) - goto update_state; - - /* Traverse all devices within the domain */ - list_for_each_entry(pdd, &genpd->dev_list, list_node) { - pd_data = to_gpd_data(pdd); - - if (pd_data->performance_state > state) - state = pd_data->performance_state; - } - - if (state == genpd->performance_state) - goto unlock; - - /* - * We aren't propagating performance state changes of a subdomain to its - * masters as we don't have hardware that needs it. Over that, the - * performance states of subdomain and its masters may not have - * one-to-one mapping and would require additional information. We can - * get back to this once we have hardware that needs it. For that - * reason, we don't have to consider performance state of the subdomains - * of genpd here. - */ - -update_state: - if (genpd_status_on(genpd)) { - ret = genpd->set_performance_state(genpd, state); - if (ret) { - gpd_data->performance_state = prev; - goto unlock; - } - } - - genpd->performance_state = state; + state = _genpd_reeval_performance_state(genpd, state); + ret = _genpd_set_performance_state(genpd, state, 0); + if (ret) + gpd_data->performance_state = prev; -unlock: genpd_unlock(genpd); return ret; @@ -347,15 +431,6 @@ static int _genpd_power_on(struct generic_pm_domain *genpd, bool timed) return ret; elapsed_ns = ktime_to_ns(ktime_sub(ktime_get(), time_start)); - - if (unlikely(genpd->set_performance_state)) { - ret = genpd->set_performance_state(genpd, genpd->performance_state); - if (ret) { - pr_warn("%s: Failed to set performance state %d (%d)\n", - genpd->name, genpd->performance_state, ret); - } - } - if (elapsed_ns <= genpd->states[state_idx].power_on_latency_ns) return ret; @@ -1907,12 +1982,21 @@ int of_genpd_add_provider_simple(struct device_node *np, ret); goto unlock; } + + /* + * Save table for faster processing while setting performance + * state. + */ + genpd->opp_table = dev_pm_opp_get_opp_table(&genpd->dev); + WARN_ON(!genpd->opp_table); } ret = genpd_add_provider(np, genpd_xlate_simple, genpd); if (ret) { - if (genpd->set_performance_state) + if (genpd->set_performance_state) { + dev_pm_opp_put_opp_table(genpd->opp_table); dev_pm_opp_of_remove_table(&genpd->dev); + } goto unlock; } @@ -1965,6 +2049,13 @@ int of_genpd_add_provider_onecell(struct device_node *np, i, ret); goto error; } + + /* + * Save table for faster processing while setting + * performance state. + */ + genpd->opp_table = dev_pm_opp_get_opp_table_indexed(&genpd->dev, i); + WARN_ON(!genpd->opp_table); } genpd->provider = &np->fwnode; @@ -1989,8 +2080,10 @@ error: genpd->provider = NULL; genpd->has_provider = false; - if (genpd->set_performance_state) + if (genpd->set_performance_state) { + dev_pm_opp_put_opp_table(genpd->opp_table); dev_pm_opp_of_remove_table(&genpd->dev); + } } mutex_unlock(&gpd_list_lock); @@ -2024,6 +2117,7 @@ void of_genpd_del_provider(struct device_node *np) if (!gpd->set_performance_state) continue; + dev_pm_opp_put_opp_table(gpd->opp_table); dev_pm_opp_of_remove_table(&gpd->dev); } } @@ -2338,7 +2432,7 @@ EXPORT_SYMBOL_GPL(genpd_dev_pm_attach); struct device *genpd_dev_pm_attach_by_id(struct device *dev, unsigned int index) { - struct device *genpd_dev; + struct device *virt_dev; int num_domains; int ret; @@ -2352,31 +2446,31 @@ struct device *genpd_dev_pm_attach_by_id(struct device *dev, return NULL; /* Allocate and register device on the genpd bus. */ - genpd_dev = kzalloc(sizeof(*genpd_dev), GFP_KERNEL); - if (!genpd_dev) + virt_dev = kzalloc(sizeof(*virt_dev), GFP_KERNEL); + if (!virt_dev) return ERR_PTR(-ENOMEM); - dev_set_name(genpd_dev, "genpd:%u:%s", index, dev_name(dev)); - genpd_dev->bus = &genpd_bus_type; - genpd_dev->release = genpd_release_dev; + dev_set_name(virt_dev, "genpd:%u:%s", index, dev_name(dev)); + virt_dev->bus = &genpd_bus_type; + virt_dev->release = genpd_release_dev; - ret = device_register(genpd_dev); + ret = device_register(virt_dev); if (ret) { - kfree(genpd_dev); + kfree(virt_dev); return ERR_PTR(ret); } /* Try to attach the device to the PM domain at the specified index. */ - ret = __genpd_dev_pm_attach(genpd_dev, dev->of_node, index, false); + ret = __genpd_dev_pm_attach(virt_dev, dev->of_node, index, false); if (ret < 1) { - device_unregister(genpd_dev); + device_unregister(virt_dev); return ret ? ERR_PTR(ret) : NULL; } - pm_runtime_enable(genpd_dev); - genpd_queue_power_off_work(dev_to_genpd(genpd_dev)); + pm_runtime_enable(virt_dev); + genpd_queue_power_off_work(dev_to_genpd(virt_dev)); - return genpd_dev; + return virt_dev; } EXPORT_SYMBOL_GPL(genpd_dev_pm_attach_by_id); @@ -2521,52 +2615,36 @@ int of_genpd_parse_idle_states(struct device_node *dn, EXPORT_SYMBOL_GPL(of_genpd_parse_idle_states); /** - * of_genpd_opp_to_performance_state- Gets performance state of device's - * power domain corresponding to a DT node's "required-opps" property. + * pm_genpd_opp_to_performance_state - Gets performance state of the genpd from its OPP node. * - * @dev: Device for which the performance-state needs to be found. - * @np: DT node where the "required-opps" property is present. This can be - * the device node itself (if it doesn't have an OPP table) or a node - * within the OPP table of a device (if device has an OPP table). + * @genpd_dev: Genpd's device for which the performance-state needs to be found. + * @opp: struct dev_pm_opp of the OPP for which we need to find performance + * state. * - * Returns performance state corresponding to the "required-opps" property of - * a DT node. This calls platform specific genpd->opp_to_performance_state() - * callback to translate power domain OPP to performance state. + * Returns performance state encoded in the OPP of the genpd. This calls + * platform specific genpd->opp_to_performance_state() callback to translate + * power domain OPP to performance state. * * Returns performance state on success and 0 on failure. */ -unsigned int of_genpd_opp_to_performance_state(struct device *dev, - struct device_node *np) +unsigned int pm_genpd_opp_to_performance_state(struct device *genpd_dev, + struct dev_pm_opp *opp) { - struct generic_pm_domain *genpd; - struct dev_pm_opp *opp; - int state = 0; + struct generic_pm_domain *genpd = NULL; + int state; - genpd = dev_to_genpd(dev); - if (IS_ERR(genpd)) - return 0; + genpd = container_of(genpd_dev, struct generic_pm_domain, dev); - if (unlikely(!genpd->set_performance_state)) + if (unlikely(!genpd->opp_to_performance_state)) return 0; genpd_lock(genpd); - - opp = of_dev_pm_opp_find_required_opp(&genpd->dev, np); - if (IS_ERR(opp)) { - dev_err(dev, "Failed to find required OPP: %ld\n", - PTR_ERR(opp)); - goto unlock; - } - state = genpd->opp_to_performance_state(genpd, opp); - dev_pm_opp_put(opp); - -unlock: genpd_unlock(genpd); return state; } -EXPORT_SYMBOL_GPL(of_genpd_opp_to_performance_state); +EXPORT_SYMBOL_GPL(pm_genpd_opp_to_performance_state); static int __init genpd_bus_init(void) { @@ -2671,7 +2749,7 @@ exit: return 0; } -static int genpd_summary_show(struct seq_file *s, void *data) +static int summary_show(struct seq_file *s, void *data) { struct generic_pm_domain *genpd; int ret = 0; @@ -2694,7 +2772,7 @@ static int genpd_summary_show(struct seq_file *s, void *data) return ret; } -static int genpd_status_show(struct seq_file *s, void *data) +static int status_show(struct seq_file *s, void *data) { static const char * const status_lookup[] = { [GPD_STATE_ACTIVE] = "on", @@ -2721,7 +2799,7 @@ exit: return ret; } -static int genpd_sub_domains_show(struct seq_file *s, void *data) +static int sub_domains_show(struct seq_file *s, void *data) { struct generic_pm_domain *genpd = s->private; struct gpd_link *link; @@ -2738,7 +2816,7 @@ static int genpd_sub_domains_show(struct seq_file *s, void *data) return ret; } -static int genpd_idle_states_show(struct seq_file *s, void *data) +static int idle_states_show(struct seq_file *s, void *data) { struct generic_pm_domain *genpd = s->private; unsigned int i; @@ -2767,7 +2845,7 @@ static int genpd_idle_states_show(struct seq_file *s, void *data) return ret; } -static int genpd_active_time_show(struct seq_file *s, void *data) +static int active_time_show(struct seq_file *s, void *data) { struct generic_pm_domain *genpd = s->private; ktime_t delta = 0; @@ -2787,7 +2865,7 @@ static int genpd_active_time_show(struct seq_file *s, void *data) return ret; } -static int genpd_total_idle_time_show(struct seq_file *s, void *data) +static int total_idle_time_show(struct seq_file *s, void *data) { struct generic_pm_domain *genpd = s->private; ktime_t delta = 0, total = 0; @@ -2815,7 +2893,7 @@ static int genpd_total_idle_time_show(struct seq_file *s, void *data) } -static int genpd_devices_show(struct seq_file *s, void *data) +static int devices_show(struct seq_file *s, void *data) { struct generic_pm_domain *genpd = s->private; struct pm_domain_data *pm_data; @@ -2841,7 +2919,7 @@ static int genpd_devices_show(struct seq_file *s, void *data) return ret; } -static int genpd_perf_state_show(struct seq_file *s, void *data) +static int perf_state_show(struct seq_file *s, void *data) { struct generic_pm_domain *genpd = s->private; @@ -2854,37 +2932,14 @@ static int genpd_perf_state_show(struct seq_file *s, void *data) return 0; } -#define define_genpd_open_function(name) \ -static int genpd_##name##_open(struct inode *inode, struct file *file) \ -{ \ - return single_open(file, genpd_##name##_show, inode->i_private); \ -} - -define_genpd_open_function(summary); -define_genpd_open_function(status); -define_genpd_open_function(sub_domains); -define_genpd_open_function(idle_states); -define_genpd_open_function(active_time); -define_genpd_open_function(total_idle_time); -define_genpd_open_function(devices); -define_genpd_open_function(perf_state); - -#define define_genpd_debugfs_fops(name) \ -static const struct file_operations genpd_##name##_fops = { \ - .open = genpd_##name##_open, \ - .read = seq_read, \ - .llseek = seq_lseek, \ - .release = single_release, \ -} - -define_genpd_debugfs_fops(summary); -define_genpd_debugfs_fops(status); -define_genpd_debugfs_fops(sub_domains); -define_genpd_debugfs_fops(idle_states); -define_genpd_debugfs_fops(active_time); -define_genpd_debugfs_fops(total_idle_time); -define_genpd_debugfs_fops(devices); -define_genpd_debugfs_fops(perf_state); +DEFINE_SHOW_ATTRIBUTE(summary); +DEFINE_SHOW_ATTRIBUTE(status); +DEFINE_SHOW_ATTRIBUTE(sub_domains); +DEFINE_SHOW_ATTRIBUTE(idle_states); +DEFINE_SHOW_ATTRIBUTE(active_time); +DEFINE_SHOW_ATTRIBUTE(total_idle_time); +DEFINE_SHOW_ATTRIBUTE(devices); +DEFINE_SHOW_ATTRIBUTE(perf_state); static int __init genpd_debug_init(void) { @@ -2897,7 +2952,7 @@ static int __init genpd_debug_init(void) return -ENOMEM; d = debugfs_create_file("pm_genpd_summary", S_IRUGO, - genpd_debugfs_dir, NULL, &genpd_summary_fops); + genpd_debugfs_dir, NULL, &summary_fops); if (!d) return -ENOMEM; @@ -2907,20 +2962,20 @@ static int __init genpd_debug_init(void) return -ENOMEM; debugfs_create_file("current_state", 0444, - d, genpd, &genpd_status_fops); + d, genpd, &status_fops); debugfs_create_file("sub_domains", 0444, - d, genpd, &genpd_sub_domains_fops); + d, genpd, &sub_domains_fops); debugfs_create_file("idle_states", 0444, - d, genpd, &genpd_idle_states_fops); + d, genpd, &idle_states_fops); debugfs_create_file("active_time", 0444, - d, genpd, &genpd_active_time_fops); + d, genpd, &active_time_fops); debugfs_create_file("total_idle_time", 0444, - d, genpd, &genpd_total_idle_time_fops); + d, genpd, &total_idle_time_fops); debugfs_create_file("devices", 0444, - d, genpd, &genpd_devices_fops); + d, genpd, &devices_fops); if (genpd->set_performance_state) debugfs_create_file("perf_state", 0444, - d, genpd, &genpd_perf_state_fops); + d, genpd, &perf_state_fops); } return 0; diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c @@ -8,6 +8,8 @@ */ #include <linux/sched/mm.h> +#include <linux/ktime.h> +#include <linux/hrtimer.h> #include <linux/export.h> #include <linux/pm_runtime.h> #include <linux/pm_wakeirq.h> @@ -93,7 +95,7 @@ static void __update_runtime_status(struct device *dev, enum rpm_status status) static void pm_runtime_deactivate_timer(struct device *dev) { if (dev->power.timer_expires > 0) { - del_timer(&dev->power.suspend_timer); + hrtimer_cancel(&dev->power.suspend_timer); dev->power.timer_expires = 0; } } @@ -124,12 +126,11 @@ static void pm_runtime_cancel_pending(struct device *dev) * This function may be called either with or without dev->power.lock held. * Either way it can be racy, since power.last_busy may be updated at any time. */ -unsigned long pm_runtime_autosuspend_expiration(struct device *dev) +u64 pm_runtime_autosuspend_expiration(struct device *dev) { int autosuspend_delay; - long elapsed; - unsigned long last_busy; - unsigned long expires = 0; + u64 last_busy, expires = 0; + u64 now = ktime_to_ns(ktime_get()); if (!dev->power.use_autosuspend) goto out; @@ -139,19 +140,9 @@ unsigned long pm_runtime_autosuspend_expiration(struct device *dev) goto out; last_busy = READ_ONCE(dev->power.last_busy); - elapsed = jiffies - last_busy; - if (elapsed < 0) - goto out; /* jiffies has wrapped around. */ - /* - * If the autosuspend_delay is >= 1 second, align the timer by rounding - * up to the nearest second. - */ - expires = last_busy + msecs_to_jiffies(autosuspend_delay); - if (autosuspend_delay >= 1000) - expires = round_jiffies(expires); - expires += !expires; - if (elapsed >= expires - last_busy) + expires = last_busy + autosuspend_delay * NSEC_PER_MSEC; + if (expires <= now) expires = 0; /* Already expired. */ out: @@ -515,7 +506,7 @@ static int rpm_suspend(struct device *dev, int rpmflags) /* If the autosuspend_delay time hasn't expired yet, reschedule. */ if ((rpmflags & RPM_AUTO) && dev->power.runtime_status != RPM_SUSPENDING) { - unsigned long expires = pm_runtime_autosuspend_expiration(dev); + u64 expires = pm_runtime_autosuspend_expiration(dev); if (expires != 0) { /* Pending requests need to be canceled. */ @@ -528,10 +519,20 @@ static int rpm_suspend(struct device *dev, int rpmflags) * expire; pm_suspend_timer_fn() will take care of the * rest. */ - if (!(dev->power.timer_expires && time_before_eq( - dev->power.timer_expires, expires))) { + if (!(dev->power.timer_expires && + dev->power.timer_expires <= expires)) { + /* + * We add a slack of 25% to gather wakeups + * without sacrificing the granularity. + */ + u64 slack = READ_ONCE(dev->power.autosuspend_delay) * + (NSEC_PER_MSEC >> 2); + dev->power.timer_expires = expires; - mod_timer(&dev->power.suspend_timer, expires); + hrtimer_start_range_ns(&dev->power.suspend_timer, + ns_to_ktime(expires), + slack, + HRTIMER_MODE_ABS); } dev->power.timer_autosuspends = 1; goto out; @@ -895,23 +896,25 @@ static void pm_runtime_work(struct work_struct *work) * * Check if the time is right and queue a suspend request. */ -static void pm_suspend_timer_fn(struct timer_list *t) +static enum hrtimer_restart pm_suspend_timer_fn(struct hrtimer *timer) { - struct device *dev = from_timer(dev, t, power.suspend_timer); + struct device *dev = container_of(timer, struct device, power.suspend_timer); unsigned long flags; - unsigned long expires; + u64 expires; spin_lock_irqsave(&dev->power.lock, flags); expires = dev->power.timer_expires; /* If 'expire' is after 'jiffies' we've been called too early. */ - if (expires > 0 && !time_after(expires, jiffies)) { + if (expires > 0 && expires < ktime_to_ns(ktime_get())) { dev->power.timer_expires = 0; rpm_suspend(dev, dev->power.timer_autosuspends ? (RPM_ASYNC | RPM_AUTO) : RPM_ASYNC); } spin_unlock_irqrestore(&dev->power.lock, flags); + + return HRTIMER_NORESTART; } /** @@ -922,6 +925,7 @@ static void pm_suspend_timer_fn(struct timer_list *t) int pm_schedule_suspend(struct device *dev, unsigned int delay) { unsigned long flags; + ktime_t expires; int retval; spin_lock_irqsave(&dev->power.lock, flags); @@ -938,10 +942,10 @@ int pm_schedule_suspend(struct device *dev, unsigned int delay) /* Other scheduled or pending requests need to be canceled. */ pm_runtime_cancel_pending(dev); - dev->power.timer_expires = jiffies + msecs_to_jiffies(delay); - dev->power.timer_expires += !dev->power.timer_expires; + expires = ktime_add(ktime_get(), ms_to_ktime(delay)); + dev->power.timer_expires = ktime_to_ns(expires); dev->power.timer_autosuspends = 0; - mod_timer(&dev->power.suspend_timer, dev->power.timer_expires); + hrtimer_start(&dev->power.suspend_timer, expires, HRTIMER_MODE_ABS); out: spin_unlock_irqrestore(&dev->power.lock, flags); @@ -1491,7 +1495,8 @@ void pm_runtime_init(struct device *dev) INIT_WORK(&dev->power.work, pm_runtime_work); dev->power.timer_expires = 0; - timer_setup(&dev->power.suspend_timer, pm_suspend_timer_fn, 0); + hrtimer_init(&dev->power.suspend_timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS); + dev->power.suspend_timer.function = pm_suspend_timer_fn; init_waitqueue_head(&dev->power.wait_queue); } diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm @@ -114,6 +114,17 @@ config ARM_QCOM_CPUFREQ_KRYO If in doubt, say N. +config ARM_QCOM_CPUFREQ_HW + tristate "QCOM CPUFreq HW driver" + depends on ARCH_QCOM || COMPILE_TEST + help + Support for the CPUFreq HW driver. + Some QCOM chipsets have a HW engine to offload the steps + necessary for changing the frequency of the CPUs. Firmware loaded + in this engine exposes a programming interface to the OS. + The driver implements the cpufreq interface for this HW engine. + Say Y if you want to support CPUFreq HW. + config ARM_S3C_CPUFREQ bool help diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile @@ -61,6 +61,7 @@ obj-$(CONFIG_MACH_MVEBU_V7) += mvebu-cpufreq.o obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o +obj-$(CONFIG_ARM_QCOM_CPUFREQ_HW) += qcom-cpufreq-hw.o obj-$(CONFIG_ARM_QCOM_CPUFREQ_KRYO) += qcom-cpufreq-kryo.o obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o diff --git a/drivers/cpufreq/cpufreq-nforce2.c b/drivers/cpufreq/cpufreq-nforce2.c @@ -123,8 +123,6 @@ static void nforce2_write_pll(int pll) /* Now write the value in all 64 registers */ for (temp = 0; temp <= 0x3f; temp++) pci_write_config_dword(nforce2_dev, NFORCE2_PLLREG, pll); - - return; } /** @@ -438,4 +436,3 @@ static void __exit nforce2_exit(void) module_init(nforce2_init); module_exit(nforce2_exit); - diff --git a/drivers/cpufreq/ia64-acpi-cpufreq.c b/drivers/cpufreq/ia64-acpi-cpufreq.c @@ -16,7 +16,6 @@ #include <linux/init.h> #include <linux/cpufreq.h> #include <linux/proc_fs.h> -#include <linux/seq_file.h> #include <asm/io.h> #include <linux/uaccess.h> #include <asm/pal.h> @@ -28,7 +27,6 @@ MODULE_AUTHOR("Venkatesh Pallipadi"); MODULE_DESCRIPTION("ACPI Processor P-States Driver"); MODULE_LICENSE("GPL"); - struct cpufreq_acpi_io { struct acpi_processor_performance acpi_data; unsigned int resume; @@ -348,10 +346,7 @@ acpi_cpufreq_exit (void) pr_debug("acpi_cpufreq_exit\n"); cpufreq_unregister_driver(&acpi_cpufreq_driver); - return; } - late_initcall(acpi_cpufreq_init); module_exit(acpi_cpufreq_exit); - diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c @@ -177,22 +177,16 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index) /* scaling down? scale voltage after frequency */ if (new_freq < old_freq) { ret = regulator_set_voltage_tol(arm_reg, volt, 0); - if (ret) { + if (ret) dev_warn(cpu_dev, "failed to scale vddarm down: %d\n", ret); - ret = 0; - } ret = regulator_set_voltage_tol(soc_reg, imx6_soc_volt[index], 0); - if (ret) { + if (ret) dev_warn(cpu_dev, "failed to scale vddsoc down: %d\n", ret); - ret = 0; - } if (!IS_ERR(pu_reg)) { ret = regulator_set_voltage_tol(pu_reg, imx6_soc_volt[index], 0); - if (ret) { + if (ret) dev_warn(cpu_dev, "failed to scale vddpu down: %d\n", ret); - ret = 0; - } } } @@ -411,9 +405,10 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev) if (of_machine_is_compatible("fsl,imx6ul") || of_machine_is_compatible("fsl,imx6ull")) { ret = imx6ul_opp_check_speed_grading(cpu_dev); - if (ret == -EPROBE_DEFER) - return ret; if (ret) { + if (ret == -EPROBE_DEFER) + return ret; + dev_err(cpu_dev, "failed to read ocotp: %d\n", ret); return ret; diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c @@ -830,6 +830,28 @@ skip_epp: wrmsrl_on_cpu(cpu, MSR_HWP_REQUEST, value); } +static void intel_pstate_hwp_force_min_perf(int cpu) +{ + u64 value; + int min_perf; + + value = all_cpu_data[cpu]->hwp_req_cached; + value &= ~GENMASK_ULL(31, 0); + min_perf = HWP_LOWEST_PERF(all_cpu_data[cpu]->hwp_cap_cached); + + /* Set hwp_max = hwp_min */ + value |= HWP_MAX_PERF(min_perf); + value |= HWP_MIN_PERF(min_perf); + + /* Set EPP/EPB to min */ + if (static_cpu_has(X86_FEATURE_HWP_EPP)) + value |= HWP_ENERGY_PERF_PREFERENCE(HWP_EPP_POWERSAVE); + else + intel_pstate_set_epb(cpu, HWP_EPP_BALANCE_POWERSAVE); + + wrmsrl_on_cpu(cpu, MSR_HWP_REQUEST, value); +} + static int intel_pstate_hwp_save_state(struct cpufreq_policy *policy) { struct cpudata *cpu_data = all_cpu_data[policy->cpu]; @@ -2084,10 +2106,12 @@ static void intel_pstate_stop_cpu(struct cpufreq_policy *policy) pr_debug("CPU %d exiting\n", policy->cpu); intel_pstate_clear_update_util_hook(policy->cpu); - if (hwp_active) + if (hwp_active) { intel_pstate_hwp_save_state(policy); - else + intel_pstate_hwp_force_min_perf(policy->cpu); + } else { intel_cpufreq_stop_cpu(policy); + } } static int intel_pstate_cpu_exit(struct cpufreq_policy *policy) diff --git a/drivers/cpufreq/pmac64-cpufreq.c b/drivers/cpufreq/pmac64-cpufreq.c @@ -411,6 +411,7 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpunode) pfunc_set_vdnap0 = pmf_find_function(root, "set-vdnap0"); pfunc_vdnap0_complete = pmf_find_function(root, "slewing-done"); + of_node_put(root); if (pfunc_set_vdnap0 == NULL || pfunc_vdnap0_complete == NULL) { pr_err("Can't find required platform function\n"); diff --git a/drivers/cpufreq/powernv-cpufreq.c b/drivers/cpufreq/powernv-cpufreq.c @@ -253,18 +253,18 @@ static int init_powernv_pstates(void) if (of_property_read_u32(power_mgt, "ibm,pstate-min", &pstate_min)) { pr_warn("ibm,pstate-min node not found\n"); - return -ENODEV; + goto out; } if (of_property_read_u32(power_mgt, "ibm,pstate-max", &pstate_max)) { pr_warn("ibm,pstate-max node not found\n"); - return -ENODEV; + goto out; } if (of_property_read_u32(power_mgt, "ibm,pstate-nominal", &pstate_nominal)) { pr_warn("ibm,pstate-nominal not found\n"); - return -ENODEV; + goto out; } if (of_property_read_u32(power_mgt, "ibm,pstate-ultra-turbo", @@ -293,14 +293,14 @@ next: pstate_ids = of_get_property(power_mgt, "ibm,pstate-ids", &len_ids); if (!pstate_ids) { pr_warn("ibm,pstate-ids not found\n"); - return -ENODEV; + goto out; } pstate_freqs = of_get_property(power_mgt, "ibm,pstate-frequencies-mhz", &len_freqs); if (!pstate_freqs) { pr_warn("ibm,pstate-frequencies-mhz not found\n"); - return -ENODEV; + goto out; } if (len_ids != len_freqs) { @@ -311,7 +311,7 @@ next: nr_pstates = min(len_ids, len_freqs) / sizeof(u32); if (!nr_pstates) { pr_warn("No PStates found\n"); - return -ENODEV; + goto out; } powernv_pstate_info.nr_pstates = nr_pstates; @@ -352,7 +352,12 @@ next: /* End of list marker entry */ powernv_freqs[i].frequency = CPUFREQ_TABLE_END; + + of_node_put(power_mgt); return 0; +out: + of_node_put(power_mgt); + return -ENODEV; } /* Returns the CPU frequency corresponding to the pstate_id. */ diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c @@ -0,0 +1,308 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + */ + +#include <linux/bitfield.h> +#include <linux/cpufreq.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/slab.h> + +#define LUT_MAX_ENTRIES 40U +#define LUT_SRC GENMASK(31, 30) +#define LUT_L_VAL GENMASK(7, 0) +#define LUT_CORE_COUNT GENMASK(18, 16) +#define LUT_ROW_SIZE 32 +#define CLK_HW_DIV 2 + +/* Register offsets */ +#define REG_ENABLE 0x0 +#define REG_LUT_TABLE 0x110 +#define REG_PERF_STATE 0x920 + +static unsigned long cpu_hw_rate, xo_rate; +static struct platform_device *global_pdev; + +static int qcom_cpufreq_hw_target_index(struct cpufreq_policy *policy, + unsigned int index) +{ + void __iomem *perf_state_reg = policy->driver_data; + + writel_relaxed(index, perf_state_reg); + + return 0; +} + +static unsigned int qcom_cpufreq_hw_get(unsigned int cpu) +{ + void __iomem *perf_state_reg; + struct cpufreq_policy *policy; + unsigned int index; + + policy = cpufreq_cpu_get_raw(cpu); + if (!policy) + return 0; + + perf_state_reg = policy->driver_data; + + index = readl_relaxed(perf_state_reg); + index = min(index, LUT_MAX_ENTRIES - 1); + + return policy->freq_table[index].frequency; +} + +static unsigned int qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy, + unsigned int target_freq) +{ + void __iomem *perf_state_reg = policy->driver_data; + int index; + + index = policy->cached_resolved_idx; + if (index < 0) + return 0; + + writel_relaxed(index, perf_state_reg); + + return policy->freq_table[index].frequency; +} + +static int qcom_cpufreq_hw_read_lut(struct device *dev, + struct cpufreq_policy *policy, + void __iomem *base) +{ + u32 data, src, lval, i, core_count, prev_cc = 0, prev_freq = 0, freq; + unsigned int max_cores = cpumask_weight(policy->cpus); + struct cpufreq_frequency_table *table; + + table = kcalloc(LUT_MAX_ENTRIES + 1, sizeof(*table), GFP_KERNEL); + if (!table) + return -ENOMEM; + + for (i = 0; i < LUT_MAX_ENTRIES; i++) { + data = readl_relaxed(base + REG_LUT_TABLE + i * LUT_ROW_SIZE); + src = FIELD_GET(LUT_SRC, data); + lval = FIELD_GET(LUT_L_VAL, data); + core_count = FIELD_GET(LUT_CORE_COUNT, data); + + if (src) + freq = xo_rate * lval / 1000; + else + freq = cpu_hw_rate / 1000; + + /* Ignore boosts in the middle of the table */ + if (core_count != max_cores) { + table[i].frequency = CPUFREQ_ENTRY_INVALID; + } else { + table[i].frequency = freq; + dev_dbg(dev, "index=%d freq=%d, core_count %d\n", i, + freq, core_count); + } + + /* + * Two of the same frequencies with the same core counts means + * end of table + */ + if (i > 0 && prev_freq == freq && prev_cc == core_count) { + struct cpufreq_frequency_table *prev = &table[i - 1]; + + /* + * Only treat the last frequency that might be a boost + * as the boost frequency + */ + if (prev_cc != max_cores) { + prev->frequency = prev_freq; + prev->flags = CPUFREQ_BOOST_FREQ; + } + + break; + } + + prev_cc = core_count; + prev_freq = freq; + } + + table[i].frequency = CPUFREQ_TABLE_END; + policy->freq_table = table; + + return 0; +} + +static void qcom_get_related_cpus(int index, struct cpumask *m) +{ + struct device_node *cpu_np; + struct of_phandle_args args; + int cpu, ret; + + for_each_possible_cpu(cpu) { + cpu_np = of_cpu_device_node_get(cpu); + if (!cpu_np) + continue; + + ret = of_parse_phandle_with_args(cpu_np, "qcom,freq-domain", + "#freq-domain-cells", 0, + &args); + of_node_put(cpu_np); + if (ret < 0) + continue; + + if (index == args.args[0]) + cpumask_set_cpu(cpu, m); + } +} + +static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy) +{ + struct device *dev = &global_pdev->dev; + struct of_phandle_args args; + struct device_node *cpu_np; + struct resource *res; + void __iomem *base; + int ret, index; + + cpu_np = of_cpu_device_node_get(policy->cpu); + if (!cpu_np) + return -EINVAL; + + ret = of_parse_phandle_with_args(cpu_np, "qcom,freq-domain", + "#freq-domain-cells", 0, &args); + of_node_put(cpu_np); + if (ret) + return ret; + + index = args.args[0]; + + res = platform_get_resource(global_pdev, IORESOURCE_MEM, index); + if (!res) + return -ENODEV; + + base = devm_ioremap(dev, res->start, resource_size(res)); + if (!base) + return -ENOMEM; + + /* HW should be in enabled state to proceed */ + if (!(readl_relaxed(base + REG_ENABLE) & 0x1)) { + dev_err(dev, "Domain-%d cpufreq hardware not enabled\n", index); + ret = -ENODEV; + goto error; + } + + qcom_get_related_cpus(index, policy->cpus); + if (!cpumask_weight(policy->cpus)) { + dev_err(dev, "Domain-%d failed to get related CPUs\n", index); + ret = -ENOENT; + goto error; + } + + policy->driver_data = base + REG_PERF_STATE; + + ret = qcom_cpufreq_hw_read_lut(dev, policy, base); + if (ret) { + dev_err(dev, "Domain-%d failed to read LUT\n", index); + goto error; + } + + policy->fast_switch_possible = true; + + return 0; +error: + devm_iounmap(dev, base); + return ret; +} + +static int qcom_cpufreq_hw_cpu_exit(struct cpufreq_policy *policy) +{ + void __iomem *base = policy->driver_data - REG_PERF_STATE; + + kfree(policy->freq_table); + devm_iounmap(&global_pdev->dev, base); + + return 0; +} + +static struct freq_attr *qcom_cpufreq_hw_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + &cpufreq_freq_attr_scaling_boost_freqs, + NULL +}; + +static struct cpufreq_driver cpufreq_qcom_hw_driver = { + .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK | + CPUFREQ_HAVE_GOVERNOR_PER_POLICY, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = qcom_cpufreq_hw_target_index, + .get = qcom_cpufreq_hw_get, + .init = qcom_cpufreq_hw_cpu_init, + .exit = qcom_cpufreq_hw_cpu_exit, + .fast_switch = qcom_cpufreq_hw_fast_switch, + .name = "qcom-cpufreq-hw", + .attr = qcom_cpufreq_hw_attr, +}; + +static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev) +{ + struct clk *clk; + int ret; + + clk = clk_get(&pdev->dev, "xo"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + xo_rate = clk_get_rate(clk); + clk_put(clk); + + clk = clk_get(&pdev->dev, "alternate"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + cpu_hw_rate = clk_get_rate(clk) / CLK_HW_DIV; + clk_put(clk); + + global_pdev = pdev; + + ret = cpufreq_register_driver(&cpufreq_qcom_hw_driver); + if (ret) + dev_err(&pdev->dev, "CPUFreq HW driver failed to register\n"); + else + dev_dbg(&pdev->dev, "QCOM CPUFreq HW driver initialized\n"); + + return ret; +} + +static int qcom_cpufreq_hw_driver_remove(struct platform_device *pdev) +{ + return cpufreq_unregister_driver(&cpufreq_qcom_hw_driver); +} + +static const struct of_device_id qcom_cpufreq_hw_match[] = { + { .compatible = "qcom,cpufreq-hw" }, + {} +}; +MODULE_DEVICE_TABLE(of, qcom_cpufreq_hw_match); + +static struct platform_driver qcom_cpufreq_hw_driver = { + .probe = qcom_cpufreq_hw_driver_probe, + .remove = qcom_cpufreq_hw_driver_remove, + .driver = { + .name = "qcom-cpufreq-hw", + .of_match_table = qcom_cpufreq_hw_match, + }, +}; + +static int __init qcom_cpufreq_hw_init(void) +{ + return platform_driver_register(&qcom_cpufreq_hw_driver); +} +subsys_initcall(qcom_cpufreq_hw_init); + +static void __exit qcom_cpufreq_hw_exit(void) +{ + platform_driver_unregister(&qcom_cpufreq_hw_driver); +} +module_exit(qcom_cpufreq_hw_exit); + +MODULE_DESCRIPTION("QCOM CPUFREQ HW Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c b/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c @@ -63,18 +63,7 @@ static int board_show(struct seq_file *seq, void *p) return 0; } -static int fops_board_open(struct inode *inode, struct file *file) -{ - return single_open(file, board_show, NULL); -} - -static const struct file_operations fops_board = { - .open = fops_board_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; +DEFINE_SHOW_ATTRIBUTE(board); static int info_show(struct seq_file *seq, void *p) { @@ -105,18 +94,7 @@ static int info_show(struct seq_file *seq, void *p) return 0; } -static int fops_info_open(struct inode *inode, struct file *file) -{ - return single_open(file, info_show, NULL); -} - -static const struct file_operations fops_info = { - .open = fops_info_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; +DEFINE_SHOW_ATTRIBUTE(info); static int io_show(struct seq_file *seq, void *p) { @@ -162,19 +140,7 @@ static int io_show(struct seq_file *seq, void *p) return 0; } -static int fops_io_open(struct inode *inode, struct file *file) -{ - return single_open(file, io_show, NULL); -} - -static const struct file_operations fops_io = { - .open = fops_io_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; - +DEFINE_SHOW_ATTRIBUTE(io); static int __init s3c_freq_debugfs_init(void) { @@ -185,13 +151,13 @@ static int __init s3c_freq_debugfs_init(void) } dbgfs_file_io = debugfs_create_file("io-timing", S_IRUGO, dbgfs_root, - NULL, &fops_io); + NULL, &io_fops); dbgfs_file_info = debugfs_create_file("info", S_IRUGO, dbgfs_root, - NULL, &fops_info); + NULL, &info_fops); dbgfs_file_board = debugfs_create_file("board", S_IRUGO, dbgfs_root, - NULL, &fops_board); + NULL, &board_fops); return 0; } diff --git a/drivers/cpuidle/cpuidle-big_little.c b/drivers/cpuidle/cpuidle-big_little.c @@ -167,6 +167,7 @@ static int __init bl_idle_init(void) { int ret; struct device_node *root = of_find_node_by_path("/"); + const struct of_device_id *match_id; if (!root) return -ENODEV; @@ -174,7 +175,11 @@ static int __init bl_idle_init(void) /* * Initialize the driver just for a compliant set of machines */ - if (!of_match_node(compatible_machine_match, root)) + match_id = of_match_node(compatible_machine_match, root); + + of_node_put(root); + + if (!match_id) return -ENODEV; if (!mcpm_is_available()) diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c @@ -202,7 +202,6 @@ int cpuidle_enter_state(struct cpuidle_device *dev, struct cpuidle_driver *drv, struct cpuidle_state *target_state = &drv->states[index]; bool broadcast = !!(target_state->flags & CPUIDLE_FLAG_TIMER_STOP); ktime_t time_start, time_end; - s64 diff; /* * Tell the time framework to switch to a broadcast timer because our @@ -248,6 +247,9 @@ int cpuidle_enter_state(struct cpuidle_device *dev, struct cpuidle_driver *drv, local_irq_enable(); if (entered_state >= 0) { + s64 diff, delay = drv->states[entered_state].exit_latency; + int i; + /* * Update cpuidle counters * This can be moved to within driver enter routine, @@ -260,6 +262,33 @@ int cpuidle_enter_state(struct cpuidle_device *dev, struct cpuidle_driver *drv, dev->last_residency = (int)diff; dev->states_usage[entered_state].time += dev->last_residency; dev->states_usage[entered_state].usage++; + + if (diff < drv->states[entered_state].target_residency) { + for (i = entered_state - 1; i >= 0; i--) { + if (drv->states[i].disabled || + dev->states_usage[i].disable) + continue; + + /* Shallower states are enabled, so update. */ + dev->states_usage[entered_state].above++; + break; + } + } else if (diff > delay) { + for (i = entered_state + 1; i < drv->state_count; i++) { + if (drv->states[i].disabled || + dev->states_usage[i].disable) + continue; + + /* + * Update if a deeper state would have been a + * better match for the observed idle duration. + */ + if (diff - delay >= drv->states[i].target_residency) + dev->states_usage[entered_state].below++; + + break; + } + } } else { dev->last_residency = 0; } @@ -702,4 +731,5 @@ static int __init cpuidle_init(void) } module_param(off, int, 0444); +module_param_string(governor, param_governor, CPUIDLE_NAME_LEN, 0444); core_initcall(cpuidle_init); diff --git a/drivers/cpuidle/cpuidle.h b/drivers/cpuidle/cpuidle.h @@ -7,6 +7,7 @@ #define __DRIVER_CPUIDLE_H /* For internal use only */ +extern char param_governor[]; extern struct cpuidle_governor *cpuidle_curr_governor; extern struct list_head cpuidle_governors; extern struct list_head cpuidle_detected_devices; diff --git a/drivers/cpuidle/governor.c b/drivers/cpuidle/governor.c @@ -11,10 +11,13 @@ #include <linux/cpu.h> #include <linux/cpuidle.h> #include <linux/mutex.h> +#include <linux/module.h> #include <linux/pm_qos.h> #include "cpuidle.h" +char param_governor[CPUIDLE_NAME_LEN]; + LIST_HEAD(cpuidle_governors); struct cpuidle_governor *cpuidle_curr_governor; @@ -86,9 +89,11 @@ int cpuidle_register_governor(struct cpuidle_governor *gov) mutex_lock(&cpuidle_lock); if (__cpuidle_find_governor(gov->name) == NULL) { ret = 0; - list_add_tail(&gov->governor_list, &cpuidle_governors); if (!cpuidle_curr_governor || - cpuidle_curr_governor->rating < gov->rating) + !strncasecmp(param_governor, gov->name, CPUIDLE_NAME_LEN) || + (cpuidle_curr_governor->rating < gov->rating && + strncasecmp(param_governor, cpuidle_curr_governor->name, + CPUIDLE_NAME_LEN))) cpuidle_switch_governor(gov); } mutex_unlock(&cpuidle_lock); diff --git a/drivers/cpuidle/poll_state.c b/drivers/cpuidle/poll_state.c @@ -20,8 +20,17 @@ static int __cpuidle poll_idle(struct cpuidle_device *dev, local_irq_enable(); if (!current_set_polling_and_test()) { - u64 limit = (u64)drv->states[1].target_residency * NSEC_PER_USEC; unsigned int loop_count = 0; + u64 limit = TICK_USEC; + int i; + + for (i = 1; i < drv->state_count; i++) { + if (drv->states[i].disabled || dev->states_usage[i].disable) + continue; + + limit = (u64)drv->states[i].target_residency * NSEC_PER_USEC; + break; + } while (!need_resched()) { cpu_relax(); diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c @@ -301,6 +301,8 @@ define_show_state_str_function(name) define_show_state_str_function(desc) define_show_state_ull_function(disable) define_store_state_ull_function(disable) +define_show_state_ull_function(above) +define_show_state_ull_function(below) define_one_state_ro(name, show_state_name); define_one_state_ro(desc, show_state_desc); @@ -310,6 +312,8 @@ define_one_state_ro(power, show_state_power_usage); define_one_state_ro(usage, show_state_usage); define_one_state_ro(time, show_state_time); define_one_state_rw(disable, show_state_disable, store_state_disable); +define_one_state_ro(above, show_state_above); +define_one_state_ro(below, show_state_below); static struct attribute *cpuidle_state_default_attrs[] = { &attr_name.attr, @@ -320,6 +324,8 @@ static struct attribute *cpuidle_state_default_attrs[] = { &attr_usage.attr, &attr_time.attr, &attr_disable.attr, + &attr_above.attr, + &attr_below.attr, NULL }; diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c @@ -285,6 +285,44 @@ static int devfreq_notify_transition(struct devfreq *devfreq, return 0; } +static int devfreq_set_target(struct devfreq *devfreq, unsigned long new_freq, + u32 flags) +{ + struct devfreq_freqs freqs; + unsigned long cur_freq; + int err = 0; + + if (devfreq->profile->get_cur_freq) + devfreq->profile->get_cur_freq(devfreq->dev.parent, &cur_freq); + else + cur_freq = devfreq->previous_freq; + + freqs.old = cur_freq; + freqs.new = new_freq; + devfreq_notify_transition(devfreq, &freqs, DEVFREQ_PRECHANGE); + + err = devfreq->profile->target(devfreq->dev.parent, &new_freq, flags); + if (err) { + freqs.new = cur_freq; + devfreq_notify_transition(devfreq, &freqs, DEVFREQ_POSTCHANGE); + return err; + } + + freqs.new = new_freq; + devfreq_notify_transition(devfreq, &freqs, DEVFREQ_POSTCHANGE); + + if (devfreq_update_status(devfreq, new_freq)) + dev_err(&devfreq->dev, + "Couldn't update frequency transition information.\n"); + + devfreq->previous_freq = new_freq; + + if (devfreq->suspend_freq) + devfreq->resume_freq = cur_freq; + + return err; +} + /* Load monitoring helper functions for governors use */ /** @@ -296,8 +334,7 @@ static int devfreq_notify_transition(struct devfreq *devfreq, */ int update_devfreq(struct devfreq *devfreq) { - struct devfreq_freqs freqs; - unsigned long freq, cur_freq, min_freq, max_freq; + unsigned long freq, min_freq, max_freq; int err = 0; u32 flags = 0; @@ -333,31 +370,8 @@ int update_devfreq(struct devfreq *devfreq) flags |= DEVFREQ_FLAG_LEAST_UPPER_BOUND; /* Use LUB */ } - if (devfreq->profile->get_cur_freq) - devfreq->profile->get_cur_freq(devfreq->dev.parent, &cur_freq); - else - cur_freq = devfreq->previous_freq; + return devfreq_set_target(devfreq, freq, flags); - freqs.old = cur_freq; - freqs.new = freq; - devfreq_notify_transition(devfreq, &freqs, DEVFREQ_PRECHANGE); - - err = devfreq->profile->target(devfreq->dev.parent, &freq, flags); - if (err) { - freqs.new = cur_freq; - devfreq_notify_transition(devfreq, &freqs, DEVFREQ_POSTCHANGE); - return err; - } - - freqs.new = freq; - devfreq_notify_transition(devfreq, &freqs, DEVFREQ_POSTCHANGE); - - if (devfreq_update_status(devfreq, freq)) - dev_err(&devfreq->dev, - "Couldn't update frequency transition information.\n"); - - devfreq->previous_freq = freq; - return err; } EXPORT_SYMBOL(update_devfreq); @@ -657,6 +671,9 @@ struct devfreq *devfreq_add_device(struct device *dev, } devfreq->max_freq = devfreq->scaling_max_freq; + devfreq->suspend_freq = dev_pm_opp_get_suspend_opp_freq(dev); + atomic_set(&devfreq->suspend_count, 0); + dev_set_name(&devfreq->dev, "devfreq%d", atomic_inc_return(&devfreq_no)); err = device_register(&devfreq->dev); @@ -857,14 +874,28 @@ EXPORT_SYMBOL(devm_devfreq_remove_device); */ int devfreq_suspend_device(struct devfreq *devfreq) { + int ret; + if (!devfreq) return -EINVAL; - if (!devfreq->governor) + if (atomic_inc_return(&devfreq->suspend_count) > 1) return 0; - return devfreq->governor->event_handler(devfreq, - DEVFREQ_GOV_SUSPEND, NULL); + if (devfreq->governor) { + ret = devfreq->governor->event_handler(devfreq, + DEVFREQ_GOV_SUSPEND, NULL); + if (ret) + return ret; + } + + if (devfreq->suspend_freq) { + ret = devfreq_set_target(devfreq, devfreq->suspend_freq, 0); + if (ret) + return ret; + } + + return 0; } EXPORT_SYMBOL(devfreq_suspend_device); @@ -878,18 +909,76 @@ EXPORT_SYMBOL(devfreq_suspend_device); */ int devfreq_resume_device(struct devfreq *devfreq) { + int ret; + if (!devfreq) return -EINVAL; - if (!devfreq->governor) + if (atomic_dec_return(&devfreq->suspend_count) >= 1) return 0; - return devfreq->governor->event_handler(devfreq, - DEVFREQ_GOV_RESUME, NULL); + if (devfreq->resume_freq) { + ret = devfreq_set_target(devfreq, devfreq->resume_freq, 0); + if (ret) + return ret; + } + + if (devfreq->governor) { + ret = devfreq->governor->event_handler(devfreq, + DEVFREQ_GOV_RESUME, NULL); + if (ret) + return ret; + } + + return 0; } EXPORT_SYMBOL(devfreq_resume_device); /** + * devfreq_suspend() - Suspend devfreq governors and devices + * + * Called during system wide Suspend/Hibernate cycles for suspending governors + * and devices preserving the state for resume. On some platforms the devfreq + * device must have precise state (frequency) after resume in order to provide + * fully operating setup. + */ +void devfreq_suspend(void) +{ + struct devfreq *devfreq; + int ret; + + mutex_lock(&devfreq_list_lock); + list_for_each_entry(devfreq, &devfreq_list, node) { + ret = devfreq_suspend_device(devfreq); + if (ret) + dev_err(&devfreq->dev, + "failed to suspend devfreq device\n"); + } + mutex_unlock(&devfreq_list_lock); +} + +/** + * devfreq_resume() - Resume devfreq governors and devices + * + * Called during system wide Suspend/Hibernate cycle for resuming governors and + * devices that are suspended with devfreq_suspend(). + */ +void devfreq_resume(void) +{ + struct devfreq *devfreq; + int ret; + + mutex_lock(&devfreq_list_lock); + list_for_each_entry(devfreq, &devfreq_list, node) { + ret = devfreq_resume_device(devfreq); + if (ret) + dev_warn(&devfreq->dev, + "failed to resume devfreq device\n"); + } + mutex_unlock(&devfreq_list_lock); +} + +/** * devfreq_add_governor() - Add devfreq governor * @governor: the devfreq governor to be added */ diff --git a/drivers/opp/core.c b/drivers/opp/core.c @@ -196,12 +196,12 @@ unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev) if (IS_ERR(opp_table)) return 0; - count = opp_table->regulator_count; - /* Regulator may not be required for the device */ - if (!count) + if (!opp_table->regulators) goto put_opp_table; + count = opp_table->regulator_count; + uV = kmalloc_array(count, sizeof(*uV), GFP_KERNEL); if (!uV) goto put_opp_table; @@ -548,44 +548,6 @@ _generic_set_opp_clk_only(struct device *dev, struct clk *clk, return ret; } -static inline int -_generic_set_opp_domain(struct device *dev, struct clk *clk, - unsigned long old_freq, unsigned long freq, - unsigned int old_pstate, unsigned int new_pstate) -{ - int ret; - - /* Scaling up? Scale domain performance state before frequency */ - if (freq > old_freq) { - ret = dev_pm_genpd_set_performance_state(dev, new_pstate); - if (ret) - return ret; - } - - ret = _generic_set_opp_clk_only(dev, clk, old_freq, freq); - if (ret) - goto restore_domain_state; - - /* Scaling down? Scale domain performance state after frequency */ - if (freq < old_freq) { - ret = dev_pm_genpd_set_performance_state(dev, new_pstate); - if (ret) - goto restore_freq; - } - - return 0; - -restore_freq: - if (_generic_set_opp_clk_only(dev, clk, freq, old_freq)) - dev_err(dev, "%s: failed to restore old-freq (%lu Hz)\n", - __func__, old_freq); -restore_domain_state: - if (freq > old_freq) - dev_pm_genpd_set_performance_state(dev, old_pstate); - - return ret; -} - static int _generic_set_opp_regulator(const struct opp_table *opp_table, struct device *dev, unsigned long old_freq, @@ -635,6 +597,84 @@ restore_voltage: return ret; } +static int _set_opp_custom(const struct opp_table *opp_table, + struct device *dev, unsigned long old_freq, + unsigned long freq, + struct dev_pm_opp_supply *old_supply, + struct dev_pm_opp_supply *new_supply) +{ + struct dev_pm_set_opp_data *data; + int size; + + data = opp_table->set_opp_data; + data->regulators = opp_table->regulators; + data->regulator_count = opp_table->regulator_count; + data->clk = opp_table->clk; + data->dev = dev; + + data->old_opp.rate = old_freq; + size = sizeof(*old_supply) * opp_table->regulator_count; + if (IS_ERR(old_supply)) + memset(data->old_opp.supplies, 0, size); + else + memcpy(data->old_opp.supplies, old_supply, size); + + data->new_opp.rate = freq; + memcpy(data->new_opp.supplies, new_supply, size); + + return opp_table->set_opp(data); +} + +/* This is only called for PM domain for now */ +static int _set_required_opps(struct device *dev, + struct opp_table *opp_table, + struct dev_pm_opp *opp) +{ + struct opp_table **required_opp_tables = opp_table->required_opp_tables; + struct device **genpd_virt_devs = opp_table->genpd_virt_devs; + unsigned int pstate; + int i, ret = 0; + + if (!required_opp_tables) + return 0; + + /* Single genpd case */ + if (!genpd_virt_devs) { + pstate = opp->required_opps[0]->pstate; + ret = dev_pm_genpd_set_performance_state(dev, pstate); + if (ret) { + dev_err(dev, "Failed to set performance state of %s: %d (%d)\n", + dev_name(dev), pstate, ret); + } + return ret; + } + + /* Multiple genpd case */ + + /* + * Acquire genpd_virt_dev_lock to make sure we don't use a genpd_dev + * after it is freed from another thread. + */ + mutex_lock(&opp_table->genpd_virt_dev_lock); + + for (i = 0; i < opp_table->required_opp_count; i++) { + pstate = opp->required_opps[i]->pstate; + + if (!genpd_virt_devs[i]) + continue; + + ret = dev_pm_genpd_set_performance_state(genpd_virt_devs[i], pstate); + if (ret) { + dev_err(dev, "Failed to set performance rate of %s: %d (%d)\n", + dev_name(genpd_virt_devs[i]), pstate, ret); + break; + } + } + mutex_unlock(&opp_table->genpd_virt_dev_lock); + + return ret; +} + /** * dev_pm_opp_set_rate() - Configure new OPP based on frequency * @dev: device for which we do this operation @@ -649,7 +689,7 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq) unsigned long freq, old_freq; struct dev_pm_opp *old_opp, *opp; struct clk *clk; - int ret, size; + int ret; if (unlikely(!target_freq)) { dev_err(dev, "%s: Invalid target frequency %lu\n", __func__, @@ -702,44 +742,34 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq) dev_dbg(dev, "%s: switching OPP: %lu Hz --> %lu Hz\n", __func__, old_freq, freq); - /* Only frequency scaling */ - if (!opp_table->regulators) { - /* - * We don't support devices with both regulator and - * domain performance-state for now. - */ - if (opp_table->genpd_performance_state) - ret = _generic_set_opp_domain(dev, clk, old_freq, freq, - IS_ERR(old_opp) ? 0 : old_opp->pstate, - opp->pstate); - else - ret = _generic_set_opp_clk_only(dev, clk, old_freq, freq); - } else if (!opp_table->set_opp) { + /* Scaling up? Configure required OPPs before frequency */ + if (freq > old_freq) { + ret = _set_required_opps(dev, opp_table, opp); + if (ret) + goto put_opp; + } + + if (opp_table->set_opp) { + ret = _set_opp_custom(opp_table, dev, old_freq, freq, + IS_ERR(old_opp) ? NULL : old_opp->supplies, + opp->supplies); + } else if (opp_table->regulators) { ret = _generic_set_opp_regulator(opp_table, dev, old_freq, freq, IS_ERR(old_opp) ? NULL : old_opp->supplies, opp->supplies); } else { - struct dev_pm_set_opp_data *data; - - data = opp_table->set_opp_data; - data->regulators = opp_table->regulators; - data->regulator_count = opp_table->regulator_count; - data->clk = clk; - data->dev = dev; - - data->old_opp.rate = old_freq; - size = sizeof(*opp->supplies) * opp_table->regulator_count; - if (IS_ERR(old_opp)) - memset(data->old_opp.supplies, 0, size); - else - memcpy(data->old_opp.supplies, old_opp->supplies, size); - - data->new_opp.rate = freq; - memcpy(data->new_opp.supplies, opp->supplies, size); + /* Only frequency scaling */ + ret = _generic_set_opp_clk_only(dev, clk, old_freq, freq); + } - ret = opp_table->set_opp(data); + /* Scaling down? Configure required OPPs after frequency */ + if (!ret && freq < old_freq) { + ret = _set_required_opps(dev, opp_table, opp); + if (ret) + dev_err(dev, "Failed to set required opps: %d\n", ret); } +put_opp: dev_pm_opp_put(opp); put_old_opp: if (!IS_ERR(old_opp)) @@ -810,8 +840,12 @@ static struct opp_table *_allocate_opp_table(struct device *dev, int index) return NULL; mutex_init(&opp_table->lock); + mutex_init(&opp_table->genpd_virt_dev_lock); INIT_LIST_HEAD(&opp_table->dev_list); + /* Mark regulator count uninitialized */ + opp_table->regulator_count = -1; + opp_dev = _add_opp_dev(dev, opp_table); if (!opp_dev) { kfree(opp_table); @@ -888,6 +922,8 @@ static void _opp_table_kref_release(struct kref *kref) struct opp_table *opp_table = container_of(kref, struct opp_table, kref); struct opp_device *opp_dev, *temp; + _of_clear_opp_table(opp_table); + /* Release clk */ if (!IS_ERR(opp_table->clk)) clk_put(opp_table->clk); @@ -905,6 +941,7 @@ static void _opp_table_kref_release(struct kref *kref) _remove_opp_dev(opp_dev, opp_table); } + mutex_destroy(&opp_table->genpd_virt_dev_lock); mutex_destroy(&opp_table->lock); list_del(&opp_table->node); kfree(opp_table); @@ -961,6 +998,7 @@ static void _opp_kref_release(struct kref *kref) * frequency/voltage list. */ blocking_notifier_call_chain(&opp_table->head, OPP_EVENT_REMOVE, opp); + _of_opp_free_required_opps(opp_table, opp); opp_debug_remove_one(opp); list_del(&opp->node); kfree(opp); @@ -1028,7 +1066,7 @@ struct dev_pm_opp *_opp_allocate(struct opp_table *table) int count, supply_size; /* Allocate space for at least one supply */ - count = table->regulator_count ? table->regulator_count : 1; + count = table->regulator_count > 0 ? table->regulator_count : 1; supply_size = sizeof(*opp->supplies) * count; /* allocate new OPP node and supplies structures */ @@ -1049,6 +1087,9 @@ static bool _opp_supported_by_regulators(struct dev_pm_opp *opp, struct regulator *reg; int i; + if (!opp_table->regulators) + return true; + for (i = 0; i < opp_table->regulator_count; i++) { reg = opp_table->regulators[i]; @@ -1333,7 +1374,7 @@ static int _allocate_set_opp_data(struct opp_table *opp_table) struct dev_pm_set_opp_data *data; int len, count = opp_table->regulator_count; - if (WARN_ON(!count)) + if (WARN_ON(!opp_table->regulators)) return -EINVAL; /* space for set_opp_data */ @@ -1430,7 +1471,7 @@ free_regulators: kfree(opp_table->regulators); opp_table->regulators = NULL; - opp_table->regulator_count = 0; + opp_table->regulator_count = -1; err: dev_pm_opp_put_opp_table(opp_table); @@ -1459,7 +1500,7 @@ void dev_pm_opp_put_regulators(struct opp_table *opp_table) kfree(opp_table->regulators); opp_table->regulators = NULL; - opp_table->regulator_count = 0; + opp_table->regulator_count = -1; put_opp_table: dev_pm_opp_put_opp_table(opp_table); @@ -1587,6 +1628,155 @@ void dev_pm_opp_unregister_set_opp_helper(struct opp_table *opp_table) EXPORT_SYMBOL_GPL(dev_pm_opp_unregister_set_opp_helper); /** + * dev_pm_opp_set_genpd_virt_dev - Set virtual genpd device for an index + * @dev: Consumer device for which the genpd device is getting set. + * @virt_dev: virtual genpd device. + * @index: index. + * + * Multiple generic power domains for a device are supported with the help of + * virtual genpd devices, which are created for each consumer device - genpd + * pair. These are the device structures which are attached to the power domain + * and are required by the OPP core to set the performance state of the genpd. + * + * This helper will normally be called by the consumer driver of the device + * "dev", as only that has details of the genpd devices. + * + * This helper needs to be called once for each of those virtual devices, but + * only if multiple domains are available for a device. Otherwise the original + * device structure will be used instead by the OPP core. + */ +struct opp_table *dev_pm_opp_set_genpd_virt_dev(struct device *dev, + struct device *virt_dev, + int index) +{ + struct opp_table *opp_table; + + opp_table = dev_pm_opp_get_opp_table(dev); + if (!opp_table) + return ERR_PTR(-ENOMEM); + + mutex_lock(&opp_table->genpd_virt_dev_lock); + + if (unlikely(!opp_table->genpd_virt_devs || + index >= opp_table->required_opp_count || + opp_table->genpd_virt_devs[index])) { + + dev_err(dev, "Invalid request to set required device\n"); + dev_pm_opp_put_opp_table(opp_table); + mutex_unlock(&opp_table->genpd_virt_dev_lock); + + return ERR_PTR(-EINVAL); + } + + opp_table->genpd_virt_devs[index] = virt_dev; + mutex_unlock(&opp_table->genpd_virt_dev_lock); + + return opp_table; +} + +/** + * dev_pm_opp_put_genpd_virt_dev() - Releases resources blocked for genpd device. + * @opp_table: OPP table returned by dev_pm_opp_set_genpd_virt_dev(). + * @virt_dev: virtual genpd device. + * + * This releases the resource previously acquired with a call to + * dev_pm_opp_set_genpd_virt_dev(). The consumer driver shall call this helper + * if it doesn't want OPP core to update performance state of a power domain + * anymore. + */ +void dev_pm_opp_put_genpd_virt_dev(struct opp_table *opp_table, + struct device *virt_dev) +{ + int i; + + /* + * Acquire genpd_virt_dev_lock to make sure virt_dev isn't getting + * used in parallel. + */ + mutex_lock(&opp_table->genpd_virt_dev_lock); + + for (i = 0; i < opp_table->required_opp_count; i++) { + if (opp_table->genpd_virt_devs[i] != virt_dev) + continue; + + opp_table->genpd_virt_devs[i] = NULL; + dev_pm_opp_put_opp_table(opp_table); + + /* Drop the vote */ + dev_pm_genpd_set_performance_state(virt_dev, 0); + break; + } + + mutex_unlock(&opp_table->genpd_virt_dev_lock); + + if (unlikely(i == opp_table->required_opp_count)) + dev_err(virt_dev, "Failed to find required device entry\n"); +} + +/** + * dev_pm_opp_xlate_performance_state() - Find required OPP's pstate for src_table. + * @src_table: OPP table which has dst_table as one of its required OPP table. + * @dst_table: Required OPP table of the src_table. + * @pstate: Current performance state of the src_table. + * + * This Returns pstate of the OPP (present in @dst_table) pointed out by the + * "required-opps" property of the OPP (present in @src_table) which has + * performance state set to @pstate. + * + * Return: Zero or positive performance state on success, otherwise negative + * value on errors. + */ +int dev_pm_opp_xlate_performance_state(struct opp_table *src_table, + struct opp_table *dst_table, + unsigned int pstate) +{ + struct dev_pm_opp *opp; + int dest_pstate = -EINVAL; + int i; + + if (!pstate) + return 0; + + /* + * Normally the src_table will have the "required_opps" property set to + * point to one of the OPPs in the dst_table, but in some cases the + * genpd and its master have one to one mapping of performance states + * and so none of them have the "required-opps" property set. Return the + * pstate of the src_table as it is in such cases. + */ + if (!src_table->required_opp_count) + return pstate; + + for (i = 0; i < src_table->required_opp_count; i++) { + if (src_table->required_opp_tables[i]->np == dst_table->np) + break; + } + + if (unlikely(i == src_table->required_opp_count)) { + pr_err("%s: Couldn't find matching OPP table (%p: %p)\n", + __func__, src_table, dst_table); + return -EINVAL; + } + + mutex_lock(&src_table->lock); + + list_for_each_entry(opp, &src_table->opp_list, node) { + if (opp->pstate == pstate) { + dest_pstate = opp->required_opps[i]->pstate; + goto unlock; + } + } + + pr_err("%s: Couldn't find matching OPP (%p: %p)\n", __func__, src_table, + dst_table); + +unlock: + mutex_unlock(&src_table->lock); + + return dest_pstate; +} + +/** * dev_pm_opp_add() - Add an OPP table from a table definitions * @dev: device for which we do this operation * @freq: Frequency in Hz for this OPP @@ -1612,6 +1802,9 @@ int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt) if (!opp_table) return -ENOMEM; + /* Fix regulator count for dynamic OPPs */ + opp_table->regulator_count = 1; + ret = _opp_add_v1(opp_table, dev, freq, u_volt, true); if (ret) dev_pm_opp_put_opp_table(opp_table); diff --git a/drivers/opp/of.c b/drivers/opp/of.c @@ -73,6 +73,167 @@ struct opp_table *_managed_opp(struct device *dev, int index) return managed_table; } +/* The caller must call dev_pm_opp_put() after the OPP is used */ +static struct dev_pm_opp *_find_opp_of_np(struct opp_table *opp_table, + struct device_node *opp_np) +{ + struct dev_pm_opp *opp; + + lockdep_assert_held(&opp_table_lock); + + mutex_lock(&opp_table->lock); + + list_for_each_entry(opp, &opp_table->opp_list, node) { + if (opp->np == opp_np) { + dev_pm_opp_get(opp); + mutex_unlock(&opp_table->lock); + return opp; + } + } + + mutex_unlock(&opp_table->lock); + + return NULL; +} + +static struct device_node *of_parse_required_opp(struct device_node *np, + int index) +{ + struct device_node *required_np; + + required_np = of_parse_phandle(np, "required-opps", index); + if (unlikely(!required_np)) { + pr_err("%s: Unable to parse required-opps: %pOF, index: %d\n", + __func__, np, index); + } + + return required_np; +} + +/* The caller must call dev_pm_opp_put_opp_table() after the table is used */ +static struct opp_table *_find_table_of_opp_np(struct device_node *opp_np) +{ + struct opp_table *opp_table; + struct device_node *opp_table_np; + + lockdep_assert_held(&opp_table_lock); + + opp_table_np = of_get_parent(opp_np); + if (!opp_table_np) + goto err; + + /* It is safe to put the node now as all we need now is its address */ + of_node_put(opp_table_np); + + list_for_each_entry(opp_table, &opp_tables, node) { + if (opp_table_np == opp_table->np) { + _get_opp_table_kref(opp_table); + return opp_table; + } + } + +err: + return ERR_PTR(-ENODEV); +} + +/* Free resources previously acquired by _opp_table_alloc_required_tables() */ +static void _opp_table_free_required_tables(struct opp_table *opp_table) +{ + struct opp_table **required_opp_tables = opp_table->required_opp_tables; + struct device **genpd_virt_devs = opp_table->genpd_virt_devs; + int i; + + if (!required_opp_tables) + return; + + for (i = 0; i < opp_table->required_opp_count; i++) { + if (IS_ERR_OR_NULL(required_opp_tables[i])) + break; + + dev_pm_opp_put_opp_table(required_opp_tables[i]); + } + + kfree(required_opp_tables); + kfree(genpd_virt_devs); + + opp_table->required_opp_count = 0; + opp_table->genpd_virt_devs = NULL; + opp_table->required_opp_tables = NULL; +} + +/* + * Populate all devices and opp tables which are part of "required-opps" list. + * Checking only the first OPP node should be enough. + */ +static void _opp_table_alloc_required_tables(struct opp_table *opp_table, + struct device *dev, + struct device_node *opp_np) +{ + struct opp_table **required_opp_tables; + struct device **genpd_virt_devs = NULL; + struct device_node *required_np, *np; + int count, i; + + /* Traversing the first OPP node is all we need */ + np = of_get_next_available_child(opp_np, NULL); + if (!np) { + dev_err(dev, "Empty OPP table\n"); + return; + } + + count = of_count_phandle_with_args(np, "required-opps", NULL); + if (!count) + goto put_np; + + if (count > 1) { + genpd_virt_devs = kcalloc(count, sizeof(*genpd_virt_devs), + GFP_KERNEL); + if (!genpd_virt_devs) + goto put_np; + } + + required_opp_tables = kcalloc(count, sizeof(*required_opp_tables), + GFP_KERNEL); + if (!required_opp_tables) { + kfree(genpd_virt_devs); + goto put_np; + } + + opp_table->genpd_virt_devs = genpd_virt_devs; + opp_table->required_opp_tables = required_opp_tables; + opp_table->required_opp_count = count; + + for (i = 0; i < count; i++) { + required_np = of_parse_required_opp(np, i); + if (!required_np) + goto free_required_tables; + + required_opp_tables[i] = _find_table_of_opp_np(required_np); + of_node_put(required_np); + + if (IS_ERR(required_opp_tables[i])) + goto free_required_tables; + + /* + * We only support genpd's OPPs in the "required-opps" for now, + * as we don't know how much about other cases. Error out if the + * required OPP doesn't belong to a genpd. + */ + if (!required_opp_tables[i]->is_genpd) { + dev_err(dev, "required-opp doesn't belong to genpd: %pOF\n", + required_np); + goto free_required_tables; + } + } + + goto put_np; + +free_required_tables: + _opp_table_free_required_tables(opp_table); +put_np: + of_node_put(np); +} + void _of_init_opp_table(struct opp_table *opp_table, struct device *dev, int index) { @@ -92,6 +253,9 @@ void _of_init_opp_table(struct opp_table *opp_table, struct device *dev, of_property_read_u32(np, "voltage-tolerance", &opp_table->voltage_tolerance_v1); + if (of_find_property(np, "#power-domain-cells", NULL)) + opp_table->is_genpd = true; + /* Get OPP table node */ opp_np = _opp_of_get_opp_desc_node(np, index); of_node_put(np); @@ -106,9 +270,86 @@ void _of_init_opp_table(struct opp_table *opp_table, struct device *dev, opp_table->np = opp_np; + _opp_table_alloc_required_tables(opp_table, dev, opp_np); of_node_put(opp_np); } +void _of_clear_opp_table(struct opp_table *opp_table) +{ + _opp_table_free_required_tables(opp_table); +} + +/* + * Release all resources previously acquired with a call to + * _of_opp_alloc_required_opps(). + */ +void _of_opp_free_required_opps(struct opp_table *opp_table, + struct dev_pm_opp *opp) +{ + struct dev_pm_opp **required_opps = opp->required_opps; + int i; + + if (!required_opps) + return; + + for (i = 0; i < opp_table->required_opp_count; i++) { + if (!required_opps[i]) + break; + + /* Put the reference back */ + dev_pm_opp_put(required_opps[i]); + } + + kfree(required_opps); + opp->required_opps = NULL; +} + +/* Populate all required OPPs which are part of "required-opps" list */ +static int _of_opp_alloc_required_opps(struct opp_table *opp_table, + struct dev_pm_opp *opp) +{ + struct dev_pm_opp **required_opps; + struct opp_table *required_table; + struct device_node *np; + int i, ret, count = opp_table->required_opp_count; + + if (!count) + return 0; + + required_opps = kcalloc(count, sizeof(*required_opps), GFP_KERNEL); + if (!required_opps) + return -ENOMEM; + + opp->required_opps = required_opps; + + for (i = 0; i < count; i++) { + required_table = opp_table->required_opp_tables[i]; + + np = of_parse_required_opp(opp->np, i); + if (unlikely(!np)) { + ret = -ENODEV; + goto free_required_opps; + } + + required_opps[i] = _find_opp_of_np(required_table, np); + of_node_put(np); + + if (!required_opps[i]) { + pr_err("%s: Unable to find required OPP node: %pOF (%d)\n", + __func__, opp->np, i); + ret = -ENODEV; + goto free_required_opps; + } + } + + return 0; + +free_required_opps: + _of_opp_free_required_opps(opp_table, opp); + + return ret; +} + static bool _opp_is_supported(struct device *dev, struct opp_table *opp_table, struct device_node *np) { @@ -150,12 +391,10 @@ static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev, struct opp_table *opp_table) { u32 *microvolt, *microamp = NULL; - int supplies, vcount, icount, ret, i, j; + int supplies = opp_table->regulator_count, vcount, icount, ret, i, j; struct property *prop = NULL; char name[NAME_MAX]; - supplies = opp_table->regulator_count ? opp_table->regulator_count : 1; - /* Search for "opp-microvolt-<name>" */ if (opp_table->prop_name) { snprintf(name, sizeof(name), "opp-microvolt-%s", @@ -170,7 +409,13 @@ static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev, /* Missing property isn't a problem, but an invalid entry is */ if (!prop) { - if (!opp_table->regulator_count) + if (unlikely(supplies == -1)) { + /* Initialize regulator_count */ + opp_table->regulator_count = 0; + return 0; + } + + if (!supplies) return 0; dev_err(dev, "%s: opp-microvolt missing although OPP managing regulators\n", @@ -179,6 +424,14 @@ static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev, } } + if (unlikely(supplies == -1)) { + /* Initialize regulator_count */ + supplies = opp_table->regulator_count = 1; + } else if (unlikely(!supplies)) { + dev_err(dev, "%s: opp-microvolt wasn't expected\n", __func__); + return -EINVAL; + } + vcount = of_property_count_u32_elems(opp->np, name); if (vcount < 0) { dev_err(dev, "%s: Invalid %s property (%d)\n", @@ -326,8 +579,7 @@ static struct dev_pm_opp *_opp_add_static_v2(struct opp_table *opp_table, ret = of_property_read_u64(np, "opp-hz", &rate); if (ret < 0) { /* "opp-hz" is optional for devices like power domains. */ - if (!of_find_property(dev->of_node, "#power-domain-cells", - NULL)) { + if (!opp_table->is_genpd) { dev_err(dev, "%s: opp-hz not found\n", __func__); goto free_opp; } @@ -354,21 +606,26 @@ static struct dev_pm_opp *_opp_add_static_v2(struct opp_table *opp_table, new_opp->dynamic = false; new_opp->available = true; + ret = _of_opp_alloc_required_opps(opp_table, new_opp); + if (ret) + goto free_opp; + if (!of_property_read_u32(np, "clock-latency-ns", &val)) new_opp->clock_latency_ns = val; - new_opp->pstate = of_genpd_opp_to_performance_state(dev, np); - ret = opp_parse_supplies(new_opp, dev, opp_table); if (ret) - goto free_opp; + goto free_required_opps; + + if (opp_table->is_genpd) + new_opp->pstate = pm_genpd_opp_to_performance_state(dev, new_opp); ret = _opp_add(dev, new_opp, opp_table, rate_not_available); if (ret) { /* Don't return error for duplicate OPPs */ if (ret == -EBUSY) ret = 0; - goto free_opp; + goto free_required_opps; } /* OPP to select on device suspend */ @@ -398,6 +655,8 @@ static struct dev_pm_opp *_opp_add_static_v2(struct opp_table *opp_table, blocking_notifier_call_chain(&opp_table->head, OPP_EVENT_ADD, new_opp); return new_opp; +free_required_opps: + _of_opp_free_required_opps(opp_table, new_opp); free_opp: _opp_free(new_opp); @@ -727,58 +986,48 @@ put_cpu_node: EXPORT_SYMBOL_GPL(dev_pm_opp_of_get_sharing_cpus); /** - * of_dev_pm_opp_find_required_opp() - Search for required OPP. - * @dev: The device whose OPP node is referenced by the 'np' DT node. + * of_get_required_opp_performance_state() - Search for required OPP and return its performance state. * @np: Node that contains the "required-opps" property. + * @index: Index of the phandle to parse. * - * Returns the OPP of the device 'dev', whose phandle is present in the "np" - * node. Although the "required-opps" property supports having multiple - * phandles, this helper routine only parses the very first phandle in the list. - * - * Return: Matching opp, else returns ERR_PTR in case of error and should be - * handled using IS_ERR. + * Returns the performance state of the OPP pointed out by the "required-opps" + * property at @index in @np. * - * The callers are required to call dev_pm_opp_put() for the returned OPP after - * use. + * Return: Zero or positive performance state on success, otherwise negative + * value on errors. */ -struct dev_pm_opp *of_dev_pm_opp_find_required_opp(struct device *dev, - struct device_node *np) +int of_get_required_opp_performance_state(struct device_node *np, int index) { - struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ENODEV); + struct dev_pm_opp *opp; struct device_node *required_np; struct opp_table *opp_table; + int pstate = -EINVAL; - opp_table = _find_opp_table(dev); - if (IS_ERR(opp_table)) - return ERR_CAST(opp_table); + required_np = of_parse_required_opp(np, index); + if (!required_np) + return -EINVAL; - required_np = of_parse_phandle(np, "required-opps", 0); - if (unlikely(!required_np)) { - dev_err(dev, "Unable to parse required-opps\n"); - goto put_opp_table; + opp_table = _find_table_of_opp_np(required_np); + if (IS_ERR(opp_table)) { + pr_err("%s: Failed to find required OPP table %pOF: %ld\n", + __func__, np, PTR_ERR(opp_table)); + goto put_required_np; } - mutex_lock(&opp_table->lock); - - list_for_each_entry(temp_opp, &opp_table->opp_list, node) { - if (temp_opp->available && temp_opp->np == required_np) { - opp = temp_opp; - - /* Increment the reference count of OPP */ - dev_pm_opp_get(opp); - break; - } + opp = _find_opp_of_np(opp_table, required_np); + if (opp) { + pstate = opp->pstate; + dev_pm_opp_put(opp); } - mutex_unlock(&opp_table->lock); + dev_pm_opp_put_opp_table(opp_table); +put_required_np: of_node_put(required_np); -put_opp_table: - dev_pm_opp_put_opp_table(opp_table); - return opp; + return pstate; } -EXPORT_SYMBOL_GPL(of_dev_pm_opp_find_required_opp); +EXPORT_SYMBOL_GPL(of_get_required_opp_performance_state); /** * dev_pm_opp_get_of_node() - Gets the DT node corresponding to an opp diff --git a/drivers/opp/opp.h b/drivers/opp/opp.h @@ -63,6 +63,7 @@ extern struct list_head opp_tables; * @supplies: Power supplies voltage/current values * @clock_latency_ns: Latency (in nanoseconds) of switching to this OPP's * frequency from any other OPP's frequency. + * @required_opps: List of OPPs that are required by this OPP. * @opp_table: points back to the opp_table struct this opp belongs to * @np: OPP's device node. * @dentry: debugfs dentry pointer (per opp) @@ -84,6 +85,7 @@ struct dev_pm_opp { unsigned long clock_latency_ns; + struct dev_pm_opp **required_opps; struct opp_table *opp_table; struct device_node *np; @@ -133,13 +135,21 @@ enum opp_table_access { * @parsed_static_opps: True if OPPs are initialized from DT. * @shared_opp: OPP is shared between multiple devices. * @suspend_opp: Pointer to OPP to be used during device suspend. + * @genpd_virt_dev_lock: Mutex protecting the genpd virtual device pointers. + * @genpd_virt_devs: List of virtual devices for multiple genpd support. + * @required_opp_tables: List of device OPP tables that are required by OPPs in + * this table. + * @required_opp_count: Number of required devices. * @supported_hw: Array of version number to support. * @supported_hw_count: Number of elements in supported_hw array. * @prop_name: A name to postfix to many DT properties, while parsing them. * @clk: Device's clock handle * @regulators: Supply regulators - * @regulator_count: Number of power supply regulators + * @regulator_count: Number of power supply regulators. Its value can be -1 + * (uninitialized), 0 (no opp-microvolt property) or > 0 (has opp-microvolt + * property). * @genpd_performance_state: Device's power domain support performance state. + * @is_genpd: Marks if the OPP table belongs to a genpd. * @set_opp: Platform specific set_opp callback * @set_opp_data: Data to be passed to set_opp callback * @dentry: debugfs dentry pointer of the real device directory (not links). @@ -171,13 +181,19 @@ struct opp_table { enum opp_table_access shared_opp; struct dev_pm_opp *suspend_opp; + struct mutex genpd_virt_dev_lock; + struct device **genpd_virt_devs; + struct opp_table **required_opp_tables; + unsigned int required_opp_count; + unsigned int *supported_hw; unsigned int supported_hw_count; const char *prop_name; struct clk *clk; struct regulator **regulators; - unsigned int regulator_count; + int regulator_count; bool genpd_performance_state; + bool is_genpd; int (*set_opp)(struct dev_pm_set_opp_data *data); struct dev_pm_set_opp_data *set_opp_data; @@ -206,10 +222,16 @@ void _put_opp_list_kref(struct opp_table *opp_table); #ifdef CONFIG_OF void _of_init_opp_table(struct opp_table *opp_table, struct device *dev, int index); +void _of_clear_opp_table(struct opp_table *opp_table); struct opp_table *_managed_opp(struct device *dev, int index); +void _of_opp_free_required_opps(struct opp_table *opp_table, + struct dev_pm_opp *opp); #else static inline void _of_init_opp_table(struct opp_table *opp_table, struct device *dev, int index) {} +static inline void _of_clear_opp_table(struct opp_table *opp_table) {} static inline struct opp_table *_managed_opp(struct device *dev, int index) { return NULL; } +static inline void _of_opp_free_required_opps(struct opp_table *opp_table, + struct dev_pm_opp *opp) {} #endif #ifdef CONFIG_DEBUG_FS diff --git a/drivers/power/avs/smartreflex.c b/drivers/power/avs/smartreflex.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * OMAP SmartReflex Voltage Control * @@ -11,10 +12,6 @@ * * Copyright (C) 2007 Texas Instruments, Inc. * Lesly A M <x0080970@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/module.h> @@ -37,7 +34,6 @@ static LIST_HEAD(sr_list); static struct omap_sr_class_data *sr_class; -static struct omap_sr_pmic_data *sr_pmic_data; static struct dentry *sr_dbg_dir; static inline void sr_write_reg(struct omap_sr *sr, unsigned offset, u32 value) @@ -780,25 +776,6 @@ void omap_sr_disable_reset_volt(struct voltagedomain *voltdm) sr_class->disable(sr, 1); } -/** - * omap_sr_register_pmic() - API to register pmic specific info. - * @pmic_data: The structure containing pmic specific data. - * - * This API is to be called from the PMIC specific code to register with - * smartreflex driver pmic specific info. Currently the only info required - * is the smartreflex init on the PMIC side. - */ -void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data) -{ - if (!pmic_data) { - pr_warn("%s: Trying to register NULL PMIC data structure with smartreflex\n", - __func__); - return; - } - - sr_pmic_data = pmic_data; -} - /* PM Debug FS entries to enable and disable smartreflex. */ static int omap_sr_autocomp_show(void *data, u64 *val) { @@ -1010,8 +987,7 @@ static int omap_sr_remove(struct platform_device *pdev) if (sr_info->autocomp_active) sr_stop_vddautocomp(sr_info); - if (sr_info->dbg_dir) - debugfs_remove_recursive(sr_info->dbg_dir); + debugfs_remove_recursive(sr_info->dbg_dir); pm_runtime_disable(&pdev->dev); list_del(&sr_info->node); @@ -1065,17 +1041,6 @@ static int __init sr_init(void) { int ret = 0; - /* - * sr_init is a late init. If by then a pmic specific API is not - * registered either there is no need for anything to be done on - * the PMIC side or somebody has forgotten to register a PMIC - * handler. Warn for the second condition. - */ - if (sr_pmic_data && sr_pmic_data->sr_pmic_init) - sr_pmic_data->sr_pmic_init(); - else - pr_warn("%s: No PMIC hook to init smartreflex\n", __func__); - ret = platform_driver_register(&smartreflex_driver); if (ret) { pr_err("%s: platform driver register failed for SR\n", diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h @@ -33,6 +33,8 @@ struct cpuidle_state_usage { unsigned long long disable; unsigned long long usage; unsigned long long time; /* in US */ + unsigned long long above; /* Number of times it's been too deep */ + unsigned long long below; /* Number of times it's been too shallow */ #ifdef CONFIG_SUSPEND unsigned long long s2idle_usage; unsigned long long s2idle_time; /* in US */ diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h @@ -131,6 +131,9 @@ struct devfreq_dev_profile { * @scaling_min_freq: Limit minimum frequency requested by OPP interface * @scaling_max_freq: Limit maximum frequency requested by OPP interface * @stop_polling: devfreq polling status of a device. + * @suspend_freq: frequency of a device set during suspend phase. + * @resume_freq: frequency of a device set in resume phase. + * @suspend_count: suspend requests counter for a device. * @total_trans: Number of devfreq transitions * @trans_table: Statistics of devfreq transitions * @time_in_state: Statistics of devfreq states @@ -167,6 +170,10 @@ struct devfreq { unsigned long scaling_max_freq; bool stop_polling; + unsigned long suspend_freq; + unsigned long resume_freq; + atomic_t suspend_count; + /* information for device frequency transition */ unsigned int total_trans; unsigned int *trans_table; @@ -198,6 +205,9 @@ extern void devm_devfreq_remove_device(struct device *dev, extern int devfreq_suspend_device(struct devfreq *devfreq); extern int devfreq_resume_device(struct devfreq *devfreq); +extern void devfreq_suspend(void); +extern void devfreq_resume(void); + /** * update_devfreq() - Reevaluate the device and configure frequency * @devfreq: the devfreq device @@ -324,6 +334,9 @@ static inline int devfreq_resume_device(struct devfreq *devfreq) return 0; } +static inline void devfreq_suspend(void) {} +static inline void devfreq_resume(void) {} + static inline struct dev_pm_opp *devfreq_recommended_opp(struct device *dev, unsigned long *freq, u32 flags) { diff --git a/include/linux/pm.h b/include/linux/pm.h @@ -26,6 +26,7 @@ #include <linux/spinlock.h> #include <linux/wait.h> #include <linux/timer.h> +#include <linux/hrtimer.h> #include <linux/completion.h> /* @@ -608,7 +609,7 @@ struct dev_pm_info { unsigned int should_wakeup:1; #endif #ifdef CONFIG_PM - struct timer_list suspend_timer; + struct hrtimer suspend_timer; unsigned long timer_expires; struct work_struct work; wait_queue_head_t wait_queue; @@ -631,7 +632,7 @@ struct dev_pm_info { enum rpm_status runtime_status; int runtime_error; int autosuspend_delay; - unsigned long last_busy; + u64 last_busy; unsigned long active_jiffies; unsigned long suspended_jiffies; unsigned long accounting_timestamp; diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h @@ -73,6 +73,7 @@ struct genpd_power_state { struct genpd_lock_ops; struct dev_pm_opp; +struct opp_table; struct generic_pm_domain { struct device dev; @@ -94,6 +95,7 @@ struct generic_pm_domain { unsigned int performance_state; /* Aggregated max performance state */ int (*power_off)(struct generic_pm_domain *domain); int (*power_on)(struct generic_pm_domain *domain); + struct opp_table *opp_table; /* OPP table of the genpd */ unsigned int (*opp_to_performance_state)(struct generic_pm_domain *genpd, struct dev_pm_opp *opp); int (*set_performance_state)(struct generic_pm_domain *genpd, @@ -134,6 +136,10 @@ struct gpd_link { struct list_head master_node; struct generic_pm_domain *slave; struct list_head slave_node; + + /* Sub-domain's per-master domain performance state */ + unsigned int performance_state; + unsigned int prev_performance_state; }; struct gpd_timing_data { @@ -258,8 +264,8 @@ int of_genpd_add_subdomain(struct of_phandle_args *parent, struct generic_pm_domain *of_genpd_remove_last(struct device_node *np); int of_genpd_parse_idle_states(struct device_node *dn, struct genpd_power_state **states, int *n); -unsigned int of_genpd_opp_to_performance_state(struct device *dev, - struct device_node *np); +unsigned int pm_genpd_opp_to_performance_state(struct device *genpd_dev, + struct dev_pm_opp *opp); int genpd_dev_pm_attach(struct device *dev); struct device *genpd_dev_pm_attach_by_id(struct device *dev, @@ -300,8 +306,8 @@ static inline int of_genpd_parse_idle_states(struct device_node *dn, } static inline unsigned int -of_genpd_opp_to_performance_state(struct device *dev, - struct device_node *np) +pm_genpd_opp_to_performance_state(struct device *genpd_dev, + struct dev_pm_opp *opp) { return 0; } diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h @@ -126,6 +126,9 @@ struct opp_table *dev_pm_opp_set_clkname(struct device *dev, const char * name); void dev_pm_opp_put_clkname(struct opp_table *opp_table); struct opp_table *dev_pm_opp_register_set_opp_helper(struct device *dev, int (*set_opp)(struct dev_pm_set_opp_data *data)); void dev_pm_opp_unregister_set_opp_helper(struct opp_table *opp_table); +struct opp_table *dev_pm_opp_set_genpd_virt_dev(struct device *dev, struct device *virt_dev, int index); +void dev_pm_opp_put_genpd_virt_dev(struct opp_table *opp_table, struct device *virt_dev); +int dev_pm_opp_xlate_performance_state(struct opp_table *src_table, struct opp_table *dst_table, unsigned int pstate); int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq); int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, const struct cpumask *cpumask); int dev_pm_opp_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask); @@ -272,6 +275,18 @@ static inline struct opp_table *dev_pm_opp_set_clkname(struct device *dev, const static inline void dev_pm_opp_put_clkname(struct opp_table *opp_table) {} +static inline struct opp_table *dev_pm_opp_set_genpd_virt_dev(struct device *dev, struct device *virt_dev, int index) +{ + return ERR_PTR(-ENOTSUPP); +} + +static inline void dev_pm_opp_put_genpd_virt_dev(struct opp_table *opp_table, struct device *virt_dev) {} + +static inline int dev_pm_opp_xlate_performance_state(struct opp_table *src_table, struct opp_table *dst_table, unsigned int pstate) +{ + return -ENOTSUPP; +} + static inline int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq) { return -ENOTSUPP; @@ -305,8 +320,8 @@ int dev_pm_opp_of_cpumask_add_table(const struct cpumask *cpumask); void dev_pm_opp_of_cpumask_remove_table(const struct cpumask *cpumask); int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask); struct device_node *dev_pm_opp_of_get_opp_desc_node(struct device *dev); -struct dev_pm_opp *of_dev_pm_opp_find_required_opp(struct device *dev, struct device_node *np); struct device_node *dev_pm_opp_get_of_node(struct dev_pm_opp *opp); +int of_get_required_opp_performance_state(struct device_node *np, int index); #else static inline int dev_pm_opp_of_add_table(struct device *dev) { @@ -341,13 +356,13 @@ static inline struct device_node *dev_pm_opp_of_get_opp_desc_node(struct device return NULL; } -static inline struct dev_pm_opp *of_dev_pm_opp_find_required_opp(struct device *dev, struct device_node *np) +static inline struct device_node *dev_pm_opp_get_of_node(struct dev_pm_opp *opp) { return NULL; } -static inline struct device_node *dev_pm_opp_get_of_node(struct dev_pm_opp *opp) +static inline int of_get_required_opp_performance_state(struct device_node *np, int index) { - return NULL; + return -ENOTSUPP; } #endif diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h @@ -51,7 +51,7 @@ extern void pm_runtime_no_callbacks(struct device *dev); extern void pm_runtime_irq_safe(struct device *dev); extern void __pm_runtime_use_autosuspend(struct device *dev, bool use); extern void pm_runtime_set_autosuspend_delay(struct device *dev, int delay); -extern unsigned long pm_runtime_autosuspend_expiration(struct device *dev); +extern u64 pm_runtime_autosuspend_expiration(struct device *dev); extern void pm_runtime_update_max_time_suspended(struct device *dev, s64 delta_ns); extern void pm_runtime_set_memalloc_noio(struct device *dev, bool enable); @@ -105,7 +105,7 @@ static inline bool pm_runtime_callbacks_present(struct device *dev) static inline void pm_runtime_mark_last_busy(struct device *dev) { - WRITE_ONCE(dev->power.last_busy, jiffies); + WRITE_ONCE(dev->power.last_busy, ktime_to_ns(ktime_get())); } static inline bool pm_runtime_is_irq_safe(struct device *dev) @@ -168,7 +168,7 @@ static inline void __pm_runtime_use_autosuspend(struct device *dev, bool use) {} static inline void pm_runtime_set_autosuspend_delay(struct device *dev, int delay) {} -static inline unsigned long pm_runtime_autosuspend_expiration( +static inline u64 pm_runtime_autosuspend_expiration( struct device *dev) { return 0; } static inline void pm_runtime_set_memalloc_noio(struct device *dev, bool enable){} diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * OMAP Smartreflex Defines and Routines * @@ -11,10 +12,6 @@ * * Copyright (C) 2007 Texas Instruments, Inc. * Lesly A M <x0080970@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __POWER_SMARTREFLEX_H @@ -303,9 +300,6 @@ void omap_sr_enable(struct voltagedomain *voltdm); void omap_sr_disable(struct voltagedomain *voltdm); void omap_sr_disable_reset_volt(struct voltagedomain *voltdm); -/* API to register the pmic specific data with the smartreflex driver. */ -void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data); - /* Smartreflex driver hooks to be called from Smartreflex class driver */ int sr_enable(struct omap_sr *sr, unsigned long volt); void sr_disable(struct omap_sr *sr); @@ -320,7 +314,5 @@ static inline void omap_sr_enable(struct voltagedomain *voltdm) {} static inline void omap_sr_disable(struct voltagedomain *voltdm) {} static inline void omap_sr_disable_reset_volt( struct voltagedomain *voltdm) {} -static inline void omap_sr_register_pmic( - struct omap_sr_pmic_data *pmic_data) {} #endif #endif diff --git a/kernel/power/main.c b/kernel/power/main.c @@ -318,23 +318,12 @@ static int suspend_stats_show(struct seq_file *s, void *unused) return 0; } - -static int suspend_stats_open(struct inode *inode, struct file *file) -{ - return single_open(file, suspend_stats_show, NULL); -} - -static const struct file_operations suspend_stats_operations = { - .open = suspend_stats_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; +DEFINE_SHOW_ATTRIBUTE(suspend_stats); static int __init pm_debugfs_init(void) { debugfs_create_file("suspend_stats", S_IFREG | S_IRUGO, - NULL, NULL, &suspend_stats_operations); + NULL, NULL, &suspend_stats_fops); return 0; } diff --git a/kernel/power/qos.c b/kernel/power/qos.c @@ -184,7 +184,7 @@ static inline void pm_qos_set_value(struct pm_qos_constraints *c, s32 value) c->target_value = value; } -static int pm_qos_dbg_show_requests(struct seq_file *s, void *unused) +static int pm_qos_debug_show(struct seq_file *s, void *unused) { struct pm_qos_object *qos = (struct pm_qos_object *)s->private; struct pm_qos_constraints *c; @@ -245,18 +245,7 @@ out: return 0; } -static int pm_qos_dbg_open(struct inode *inode, struct file *file) -{ - return single_open(file, pm_qos_dbg_show_requests, - inode->i_private); -} - -static const struct file_operations pm_qos_debug_fops = { - .open = pm_qos_dbg_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; +DEFINE_SHOW_ATTRIBUTE(pm_qos_debug); /** * pm_qos_update_target - manages the constraints list and calls the notifiers diff --git a/kernel/sched/cpufreq.c b/kernel/sched/cpufreq.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Scheduler code and data structures related to cpufreq. * * Copyright (C) 2016, Intel Corporation * Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "sched.h" diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * CPUFreq governor based on scheduler-provided CPU utilization data. * * Copyright (C) 2016, Intel Corporation * Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt diff --git a/tools/power/cpupower/Makefile b/tools/power/cpupower/Makefile @@ -89,6 +89,7 @@ endif localedir ?= /usr/share/locale docdir ?= /usr/share/doc/packages/cpupower confdir ?= /etc/ +bash_completion_dir ?= /usr/share/bash-completion/completions # Toolchain: what tools do we use, and what options do they need: @@ -96,7 +97,8 @@ CP = cp -fpR INSTALL = /usr/bin/install -c INSTALL_PROGRAM = ${INSTALL} INSTALL_DATA = ${INSTALL} -m 644 -INSTALL_SCRIPT = ${INSTALL_PROGRAM} +#bash completion scripts get sourced and so they should be rw only. +INSTALL_SCRIPT = ${INSTALL} -m 644 # If you are running a cross compiler, you may want to set this # to something more interesting, like "arm-linux-". If you want @@ -288,6 +290,8 @@ install-lib: install-tools: $(INSTALL) -d $(DESTDIR)${bindir} $(INSTALL_PROGRAM) $(OUTPUT)cpupower $(DESTDIR)${bindir} + $(INSTALL) -d $(DESTDIR)${bash_completion_dir} + $(INSTALL_SCRIPT) cpupower-completion.sh '$(DESTDIR)${bash_completion_dir}/cpupower' install-man: $(INSTALL_DATA) -D man/cpupower.1 $(DESTDIR)${mandir}/man1/cpupower.1 diff --git a/tools/power/cpupower/cpupower-completion.sh b/tools/power/cpupower/cpupower-completion.sh @@ -0,0 +1,128 @@ +# -*- shell-script -*- +# bash completion script for cpupower +# Taken from git.git's completion script. + +_cpupower_commands="frequency-info frequency-set idle-info idle-set set info monitor" + +_frequency_info () +{ + local flags="-f -w -l -d -p -g -a -s -y -o -m -n --freq --hwfreq --hwlimits --driver --policy --governors --related-cpus --affected-cpus --stats --latency --proc --human --no-rounding" + local prev="${COMP_WORDS[COMP_CWORD-1]}" + local cur="${COMP_WORDS[COMP_CWORD]}" + case "$prev" in + frequency-info) COMPREPLY=($(compgen -W "$flags" -- "$cur")) ;; + esac +} + +_frequency_set () +{ + local flags="-f -g --freq --governor -d --min -u --max -r --related" + local prev="${COMP_WORDS[COMP_CWORD-1]}" + local cur="${COMP_WORDS[COMP_CWORD]}" + case "$prev" in + -f| --freq | -d | --min | -u | --max) + if [ -d /sys/devices/system/cpu/cpufreq/ ] ; then + COMPREPLY=($(compgen -W '$(cat $(ls -d /sys/devices/system/cpu/cpufreq/policy* | head -1)/scaling_available_frequencies)' -- "$cur")) + fi ;; + -g| --governor) + if [ -d /sys/devices/system/cpu/cpufreq/ ] ; then + COMPREPLY=($(compgen -W '$(cat $(ls -d /sys/devices/system/cpu/cpufreq/policy* | head -1)/scaling_available_governors)' -- "$cur")) + fi;; + frequency-set) COMPREPLY=($(compgen -W "$flags" -- "$cur")) ;; + esac +} + +_idle_info() +{ + local flags="-f --silent" + local prev="${COMP_WORDS[COMP_CWORD-1]}" + local cur="${COMP_WORDS[COMP_CWORD]}" + case "$prev" in + idle-info) COMPREPLY=($(compgen -W "$flags" -- "$cur")) ;; + esac +} + +_idle_set() +{ + local flags="-d --disable -e --enable -D --disable-by-latency -E --enable-all" + local prev="${COMP_WORDS[COMP_CWORD-1]}" + local cur="${COMP_WORDS[COMP_CWORD]}" + case "$prev" in + idle-set) COMPREPLY=($(compgen -W "$flags" -- "$cur")) ;; + esac +} + +_set() +{ + local flags="--perf-bias, -b" + local prev="${COMP_WORDS[COMP_CWORD-1]}" + local cur="${COMP_WORDS[COMP_CWORD]}" + case "$prev" in + set) COMPREPLY=($(compgen -W "$flags" -- "$cur")) ;; + esac +} + +_monitor() +{ + local flags="-l -m -i -c -v" + local prev="${COMP_WORDS[COMP_CWORD-1]}" + local cur="${COMP_WORDS[COMP_CWORD]}" + case "$prev" in + monitor) COMPREPLY=($(compgen -W "$flags" -- "$cur")) ;; + esac +} + +_taskset() +{ + local prev_to_prev="${COMP_WORDS[COMP_CWORD-2]}" + local prev="${COMP_WORDS[COMP_CWORD-1]}" + local cur="${COMP_WORDS[COMP_CWORD]}" + case "$prev_to_prev" in + -c|--cpu) COMPREPLY=($(compgen -W "$_cpupower_commands" -- "$cur")) ;; + esac + case "$prev" in + frequency-info) _frequency_info ;; + frequency-set) _frequency_set ;; + idle-info) _idle_info ;; + idle-set) _idle_set ;; + set) _set ;; + monitor) _monitor ;; + esac + +} + +_cpupower () +{ + local i + local c=1 + local command + + while test $c -lt $COMP_CWORD; do + if test $c == 1; then + command="${COMP_WORDS[c]}" + fi + c=$((++c)) + done + + # Complete name of subcommand if the user has not finished typing it yet. + if test $c -eq $COMP_CWORD -a -z "$command"; then + COMPREPLY=($(compgen -W "help -v --version -c --cpu $_cpupower_commands" -- "${COMP_WORDS[COMP_CWORD]}")) + return + fi + + # Complete arguments to subcommands. + case "$command" in + -v|--version) return ;; + -c|--cpu) _taskset ;; + help) COMPREPLY=($(compgen -W "$_cpupower_commands" -- "${COMP_WORDS[COMP_CWORD]}")) ;; + frequency-info) _frequency_info ;; + frequency-set) _frequency_set ;; + idle-info) _idle_info ;; + idle-set) _idle_set ;; + set) _set ;; + monitor) _monitor ;; + esac +} + +complete -o bashdefault -o default -F _cpupower cpupower 2>/dev/null \ + || complete -o default -F _cpupower cpupower diff --git a/tools/power/x86/intel_pstate_tracer/intel_pstate_tracer.py b/tools/power/x86/intel_pstate_tracer/intel_pstate_tracer.py @@ -585,9 +585,9 @@ current_max_cpu = 0 read_trace_data(filename) -clear_trace_file() -# Free the memory if interval: + clear_trace_file() + # Free the memory free_trace_buffer() if graph_data_present == False: diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c @@ -1,6 +1,6 @@ /* * turbostat -- show CPU frequency and C-state residency - * on modern Intel turbo-capable processors. + * on modern Intel and AMD processors. * * Copyright (c) 2013 Intel Corporation. * Len Brown <len.brown@intel.com> @@ -71,6 +71,8 @@ unsigned int do_irtl_snb; unsigned int do_irtl_hsw; unsigned int units = 1000000; /* MHz etc */ unsigned int genuine_intel; +unsigned int authentic_amd; +unsigned int max_level, max_extended_level; unsigned int has_invariant_tsc; unsigned int do_nhm_platform_info; unsigned int no_MSR_MISC_PWR_MGMT; @@ -1667,30 +1669,51 @@ int get_mp(int cpu, struct msr_counter *mp, unsigned long long *counterp) void get_apic_id(struct thread_data *t) { - unsigned int eax, ebx, ecx, edx, max_level; + unsigned int eax, ebx, ecx, edx; - eax = ebx = ecx = edx = 0; + if (DO_BIC(BIC_APIC)) { + eax = ebx = ecx = edx = 0; + __cpuid(1, eax, ebx, ecx, edx); - if (!genuine_intel) + t->apic_id = (ebx >> 24) & 0xff; + } + + if (!DO_BIC(BIC_X2APIC)) return; - __cpuid(0, max_level, ebx, ecx, edx); + if (authentic_amd) { + unsigned int topology_extensions; - __cpuid(1, eax, ebx, ecx, edx); - t->apic_id = (ebx >> 24) & 0xf; + if (max_extended_level < 0x8000001e) + return; - if (max_level < 0xb) + eax = ebx = ecx = edx = 0; + __cpuid(0x80000001, eax, ebx, ecx, edx); + topology_extensions = ecx & (1 << 22); + + if (topology_extensions == 0) + return; + + eax = ebx = ecx = edx = 0; + __cpuid(0x8000001e, eax, ebx, ecx, edx); + + t->x2apic_id = eax; return; + } - if (!DO_BIC(BIC_X2APIC)) + if (!genuine_intel) + return; + + if (max_level < 0xb) return; ecx = 0; __cpuid(0xb, eax, ebx, ecx, edx); t->x2apic_id = edx; - if (debug && (t->apic_id != t->x2apic_id)) - fprintf(outf, "cpu%d: apic 0x%x x2apic 0x%x\n", t->cpu_id, t->apic_id, t->x2apic_id); + if (debug && (t->apic_id != (t->x2apic_id & 0xff))) + fprintf(outf, "cpu%d: BIOS BUG: apic 0x%x x2apic 0x%x\n", + t->cpu_id, t->apic_id, t->x2apic_id); } /* @@ -1953,11 +1976,12 @@ done: #define PCL_7S 11 /* PC7 Shrink */ #define PCL__8 12 /* PC8 */ #define PCL__9 13 /* PC9 */ -#define PCLUNL 14 /* Unlimited */ +#define PCL_10 14 /* PC10 */ +#define PCLUNL 15 /* Unlimited */ int pkg_cstate_limit = PCLUKN; char *pkg_cstate_limit_strings[] = { "reserved", "unknown", "pc0", "pc1", "pc2", - "pc3", "pc4", "pc6", "pc6n", "pc6r", "pc7", "pc7s", "pc8", "pc9", "unlimited"}; + "pc3", "pc4", "pc6", "pc6n", "pc6r", "pc7", "pc7s", "pc8", "pc9", "pc10", "unlimited"}; int nhm_pkg_cstate_limits[16] = {PCL__0, PCL__1, PCL__3, PCL__6, PCL__7, PCLRSV, PCLRSV, PCLUNL, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV}; int snb_pkg_cstate_limits[16] = {PCL__0, PCL__2, PCL_6N, PCL_6R, PCL__7, PCL_7S, PCLRSV, PCLUNL, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV}; @@ -1965,7 +1989,7 @@ int hsw_pkg_cstate_limits[16] = {PCL__0, PCL__2, PCL__3, PCL__6, PCL__7, PCL_7S, int slv_pkg_cstate_limits[16] = {PCL__0, PCL__1, PCLRSV, PCLRSV, PCL__4, PCLRSV, PCL__6, PCL__7, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCL__6, PCL__7}; int amt_pkg_cstate_limits[16] = {PCLUNL, PCL__1, PCL__2, PCLRSV, PCLRSV, PCLRSV, PCL__6, PCL__7, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV}; int phi_pkg_cstate_limits[16] = {PCL__0, PCL__2, PCL_6N, PCL_6R, PCLRSV, PCLRSV, PCLRSV, PCLUNL, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV}; -int bxt_pkg_cstate_limits[16] = {PCL__0, PCL__2, PCLUNL, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV}; +int glm_pkg_cstate_limits[16] = {PCLUNL, PCL__1, PCL__3, PCL__6, PCL__7, PCL_7S, PCL__8, PCL__9, PCL_10, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV}; int skx_pkg_cstate_limits[16] = {PCL__0, PCL__2, PCL_6N, PCL_6R, PCLRSV, PCLRSV, PCLRSV, PCLUNL, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV}; @@ -3113,13 +3137,8 @@ int probe_nhm_msrs(unsigned int family, unsigned int model) bclk = discover_bclk(family, model); switch (model) { - case INTEL_FAM6_NEHALEM_EP: /* Core i7, Xeon 5500 series - Bloomfield, Gainstown NHM-EP */ case INTEL_FAM6_NEHALEM: /* Core i7 and i5 Processor - Clarksfield, Lynnfield, Jasper Forest */ - case 0x1F: /* Core i7 and i5 Processor - Nehalem */ - case INTEL_FAM6_WESTMERE: /* Westmere Client - Clarkdale, Arrandale */ - case INTEL_FAM6_WESTMERE_EP: /* Westmere EP - Gulftown */ case INTEL_FAM6_NEHALEM_EX: /* Nehalem-EX Xeon - Beckton */ - case INTEL_FAM6_WESTMERE_EX: /* Westmere-EX Xeon - Eagleton */ pkg_cstate_limits = nhm_pkg_cstate_limits; break; case INTEL_FAM6_SANDYBRIDGE: /* SNB */ @@ -3131,16 +3150,11 @@ int probe_nhm_msrs(unsigned int family, unsigned int model) break; case INTEL_FAM6_HASWELL_CORE: /* HSW */ case INTEL_FAM6_HASWELL_X: /* HSX */ - case INTEL_FAM6_HASWELL_ULT: /* HSW */ case INTEL_FAM6_HASWELL_GT3E: /* HSW */ case INTEL_FAM6_BROADWELL_CORE: /* BDW */ case INTEL_FAM6_BROADWELL_GT3E: /* BDW */ case INTEL_FAM6_BROADWELL_X: /* BDX */ - case INTEL_FAM6_BROADWELL_XEON_D: /* BDX-DE */ case INTEL_FAM6_SKYLAKE_MOBILE: /* SKL */ - case INTEL_FAM6_SKYLAKE_DESKTOP: /* SKL */ - case INTEL_FAM6_KABYLAKE_MOBILE: /* KBL */ - case INTEL_FAM6_KABYLAKE_DESKTOP: /* KBL */ case INTEL_FAM6_CANNONLAKE_MOBILE: /* CNL */ pkg_cstate_limits = hsw_pkg_cstate_limits; has_misc_feature_control = 1; @@ -3159,13 +3173,12 @@ int probe_nhm_msrs(unsigned int family, unsigned int model) no_MSR_MISC_PWR_MGMT = 1; break; case INTEL_FAM6_XEON_PHI_KNL: /* PHI */ - case INTEL_FAM6_XEON_PHI_KNM: pkg_cstate_limits = phi_pkg_cstate_limits; break; case INTEL_FAM6_ATOM_GOLDMONT: /* BXT */ case INTEL_FAM6_ATOM_GOLDMONT_PLUS: case INTEL_FAM6_ATOM_GOLDMONT_X: /* DNV */ - pkg_cstate_limits = bxt_pkg_cstate_limits; + pkg_cstate_limits = glm_pkg_cstate_limits; break; default: return 0; @@ -3220,7 +3233,6 @@ int is_bdx(unsigned int family, unsigned int model) switch (model) { case INTEL_FAM6_BROADWELL_X: - case INTEL_FAM6_BROADWELL_XEON_D: return 1; } return 0; @@ -3246,9 +3258,7 @@ int has_turbo_ratio_limit(unsigned int family, unsigned int model) switch (model) { /* Nehalem compatible, but do not include turbo-ratio limit support */ case INTEL_FAM6_NEHALEM_EX: /* Nehalem-EX Xeon - Beckton */ - case INTEL_FAM6_WESTMERE_EX: /* Westmere-EX Xeon - Eagleton */ case INTEL_FAM6_XEON_PHI_KNL: /* PHI - Knights Landing (different MSR definition) */ - case INTEL_FAM6_XEON_PHI_KNM: return 0; default: return 1; @@ -3303,7 +3313,6 @@ int has_knl_turbo_ratio_limit(unsigned int family, unsigned int model) switch (model) { case INTEL_FAM6_XEON_PHI_KNL: /* Knights Landing */ - case INTEL_FAM6_XEON_PHI_KNM: return 1; default: return 0; @@ -3337,21 +3346,15 @@ int has_config_tdp(unsigned int family, unsigned int model) case INTEL_FAM6_IVYBRIDGE: /* IVB */ case INTEL_FAM6_HASWELL_CORE: /* HSW */ case INTEL_FAM6_HASWELL_X: /* HSX */ - case INTEL_FAM6_HASWELL_ULT: /* HSW */ case INTEL_FAM6_HASWELL_GT3E: /* HSW */ case INTEL_FAM6_BROADWELL_CORE: /* BDW */ case INTEL_FAM6_BROADWELL_GT3E: /* BDW */ case INTEL_FAM6_BROADWELL_X: /* BDX */ - case INTEL_FAM6_BROADWELL_XEON_D: /* BDX-DE */ case INTEL_FAM6_SKYLAKE_MOBILE: /* SKL */ - case INTEL_FAM6_SKYLAKE_DESKTOP: /* SKL */ - case INTEL_FAM6_KABYLAKE_MOBILE: /* KBL */ - case INTEL_FAM6_KABYLAKE_DESKTOP: /* KBL */ case INTEL_FAM6_CANNONLAKE_MOBILE: /* CNL */ case INTEL_FAM6_SKYLAKE_X: /* SKX */ case INTEL_FAM6_XEON_PHI_KNL: /* Knights Landing */ - case INTEL_FAM6_XEON_PHI_KNM: return 1; default: return 0; @@ -3744,9 +3747,7 @@ rapl_dram_energy_units_probe(int model, double rapl_energy_units) switch (model) { case INTEL_FAM6_HASWELL_X: /* HSX */ case INTEL_FAM6_BROADWELL_X: /* BDX */ - case INTEL_FAM6_BROADWELL_XEON_D: /* BDX-DE */ case INTEL_FAM6_XEON_PHI_KNL: /* KNL */ - case INTEL_FAM6_XEON_PHI_KNM: return (rapl_dram_energy_units = 15.3 / 1000000); default: return (rapl_energy_units); @@ -3775,7 +3776,6 @@ void rapl_probe(unsigned int family, unsigned int model) case INTEL_FAM6_SANDYBRIDGE: case INTEL_FAM6_IVYBRIDGE: case INTEL_FAM6_HASWELL_CORE: /* HSW */ - case INTEL_FAM6_HASWELL_ULT: /* HSW */ case INTEL_FAM6_HASWELL_GT3E: /* HSW */ case INTEL_FAM6_BROADWELL_CORE: /* BDW */ case INTEL_FAM6_BROADWELL_GT3E: /* BDW */ @@ -3799,9 +3799,6 @@ void rapl_probe(unsigned int family, unsigned int model) BIC_PRESENT(BIC_PkgWatt); break; case INTEL_FAM6_SKYLAKE_MOBILE: /* SKL */ - case INTEL_FAM6_SKYLAKE_DESKTOP: /* SKL */ - case INTEL_FAM6_KABYLAKE_MOBILE: /* KBL */ - case INTEL_FAM6_KABYLAKE_DESKTOP: /* KBL */ case INTEL_FAM6_CANNONLAKE_MOBILE: /* CNL */ do_rapl = RAPL_PKG | RAPL_CORES | RAPL_CORE_POLICY | RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_PKG_PERF_STATUS | RAPL_GFX | RAPL_PKG_POWER_INFO; BIC_PRESENT(BIC_PKG__); @@ -3820,10 +3817,8 @@ void rapl_probe(unsigned int family, unsigned int model) break; case INTEL_FAM6_HASWELL_X: /* HSX */ case INTEL_FAM6_BROADWELL_X: /* BDX */ - case INTEL_FAM6_BROADWELL_XEON_D: /* BDX-DE */ case INTEL_FAM6_SKYLAKE_X: /* SKX */ case INTEL_FAM6_XEON_PHI_KNL: /* KNL */ - case INTEL_FAM6_XEON_PHI_KNM: do_rapl = RAPL_PKG | RAPL_DRAM | RAPL_DRAM_POWER_INFO | RAPL_DRAM_PERF_STATUS | RAPL_PKG_PERF_STATUS | RAPL_PKG_POWER_INFO; BIC_PRESENT(BIC_PKG__); BIC_PRESENT(BIC_RAM__); @@ -3916,7 +3911,6 @@ void perf_limit_reasons_probe(unsigned int family, unsigned int model) switch (model) { case INTEL_FAM6_HASWELL_CORE: /* HSW */ - case INTEL_FAM6_HASWELL_ULT: /* HSW */ case INTEL_FAM6_HASWELL_GT3E: /* HSW */ do_gfx_perf_limit_reasons = 1; case INTEL_FAM6_HASWELL_X: /* HSX */ @@ -4128,16 +4122,11 @@ int has_snb_msrs(unsigned int family, unsigned int model) case INTEL_FAM6_IVYBRIDGE_X: /* IVB Xeon */ case INTEL_FAM6_HASWELL_CORE: /* HSW */ case INTEL_FAM6_HASWELL_X: /* HSW */ - case INTEL_FAM6_HASWELL_ULT: /* HSW */ case INTEL_FAM6_HASWELL_GT3E: /* HSW */ case INTEL_FAM6_BROADWELL_CORE: /* BDW */ case INTEL_FAM6_BROADWELL_GT3E: /* BDW */ case INTEL_FAM6_BROADWELL_X: /* BDX */ - case INTEL_FAM6_BROADWELL_XEON_D: /* BDX-DE */ case INTEL_FAM6_SKYLAKE_MOBILE: /* SKL */ - case INTEL_FAM6_SKYLAKE_DESKTOP: /* SKL */ - case INTEL_FAM6_KABYLAKE_MOBILE: /* KBL */ - case INTEL_FAM6_KABYLAKE_DESKTOP: /* KBL */ case INTEL_FAM6_CANNONLAKE_MOBILE: /* CNL */ case INTEL_FAM6_SKYLAKE_X: /* SKX */ case INTEL_FAM6_ATOM_GOLDMONT: /* BXT */ @@ -4166,12 +4155,9 @@ int has_hsw_msrs(unsigned int family, unsigned int model) return 0; switch (model) { - case INTEL_FAM6_HASWELL_ULT: /* HSW */ + case INTEL_FAM6_HASWELL_CORE: case INTEL_FAM6_BROADWELL_CORE: /* BDW */ case INTEL_FAM6_SKYLAKE_MOBILE: /* SKL */ - case INTEL_FAM6_SKYLAKE_DESKTOP: /* SKL */ - case INTEL_FAM6_KABYLAKE_MOBILE: /* KBL */ - case INTEL_FAM6_KABYLAKE_DESKTOP: /* KBL */ case INTEL_FAM6_CANNONLAKE_MOBILE: /* CNL */ case INTEL_FAM6_ATOM_GOLDMONT: /* BXT */ case INTEL_FAM6_ATOM_GOLDMONT_PLUS: @@ -4195,9 +4181,6 @@ int has_skl_msrs(unsigned int family, unsigned int model) switch (model) { case INTEL_FAM6_SKYLAKE_MOBILE: /* SKL */ - case INTEL_FAM6_SKYLAKE_DESKTOP: /* SKL */ - case INTEL_FAM6_KABYLAKE_MOBILE: /* KBL */ - case INTEL_FAM6_KABYLAKE_DESKTOP: /* KBL */ case INTEL_FAM6_CANNONLAKE_MOBILE: /* CNL */ return 1; } @@ -4222,7 +4205,6 @@ int is_knl(unsigned int family, unsigned int model) return 0; switch (model) { case INTEL_FAM6_XEON_PHI_KNL: /* KNL */ - case INTEL_FAM6_XEON_PHI_KNM: return 1; } return 0; @@ -4436,18 +4418,56 @@ void decode_c6_demotion_policy_msr(void) base_cpu, msr, msr & (1 << 0) ? "EN" : "DIS"); } +/* + * When models are the same, for the purpose of turbostat, reuse + */ +unsigned int intel_model_duplicates(unsigned int model) +{ + + switch(model) { + case INTEL_FAM6_NEHALEM_EP: /* Core i7, Xeon 5500 series - Bloomfield, Gainstown NHM-EP */ + case INTEL_FAM6_NEHALEM: /* Core i7 and i5 Processor - Clarksfield, Lynnfield, Jasper Forest */ + case 0x1F: /* Core i7 and i5 Processor - Nehalem */ + case INTEL_FAM6_WESTMERE: /* Westmere Client - Clarkdale, Arrandale */ + case INTEL_FAM6_WESTMERE_EP: /* Westmere EP - Gulftown */ + return INTEL_FAM6_NEHALEM; + + case INTEL_FAM6_NEHALEM_EX: /* Nehalem-EX Xeon - Beckton */ + case INTEL_FAM6_WESTMERE_EX: /* Westmere-EX Xeon - Eagleton */ + return INTEL_FAM6_NEHALEM_EX; + + case INTEL_FAM6_XEON_PHI_KNM: + return INTEL_FAM6_XEON_PHI_KNL; + + case INTEL_FAM6_HASWELL_ULT: + return INTEL_FAM6_HASWELL_CORE; + + case INTEL_FAM6_BROADWELL_X: + case INTEL_FAM6_BROADWELL_XEON_D: /* BDX-DE */ + return INTEL_FAM6_BROADWELL_X; + + case INTEL_FAM6_SKYLAKE_MOBILE: + case INTEL_FAM6_SKYLAKE_DESKTOP: + case INTEL_FAM6_KABYLAKE_MOBILE: + case INTEL_FAM6_KABYLAKE_DESKTOP: + return INTEL_FAM6_SKYLAKE_MOBILE; + } + return model; +} void process_cpuid() { - unsigned int eax, ebx, ecx, edx, max_level, max_extended_level; - unsigned int fms, family, model, stepping; + unsigned int eax, ebx, ecx, edx; + unsigned int fms, family, model, stepping, ecx_flags, edx_flags; unsigned int has_turbo; eax = ebx = ecx = edx = 0; __cpuid(0, max_level, ebx, ecx, edx); - if (ebx == 0x756e6547 && edx == 0x49656e69 && ecx == 0x6c65746e) + if (ebx == 0x756e6547 && ecx == 0x6c65746e && edx == 0x49656e69) genuine_intel = 1; + else if (ebx == 0x68747541 && ecx == 0x444d4163 && edx == 0x69746e65) + authentic_amd = 1; if (!quiet) fprintf(outf, "CPUID(0): %.4s%.4s%.4s ", @@ -4461,25 +4481,8 @@ void process_cpuid() family += (fms >> 20) & 0xff; if (family >= 6) model += ((fms >> 16) & 0xf) << 4; - - if (!quiet) { - fprintf(outf, "%d CPUID levels; family:model:stepping 0x%x:%x:%x (%d:%d:%d)\n", - max_level, family, model, stepping, family, model, stepping); - fprintf(outf, "CPUID(1): %s %s %s %s %s %s %s %s %s %s\n", - ecx & (1 << 0) ? "SSE3" : "-", - ecx & (1 << 3) ? "MONITOR" : "-", - ecx & (1 << 6) ? "SMX" : "-", - ecx & (1 << 7) ? "EIST" : "-", - ecx & (1 << 8) ? "TM2" : "-", - edx & (1 << 4) ? "TSC" : "-", - edx & (1 << 5) ? "MSR" : "-", - edx & (1 << 22) ? "ACPI-TM" : "-", - edx & (1 << 28) ? "HT" : "-", - edx & (1 << 29) ? "TM" : "-"); - } - - if (!(edx & (1 << 5))) - errx(1, "CPUID: no MSR"); + ecx_flags = ecx; + edx_flags = edx; /* * check max extended function levels of CPUID. @@ -4489,6 +4492,27 @@ void process_cpuid() ebx = ecx = edx = 0; __cpuid(0x80000000, max_extended_level, ebx, ecx, edx); + if (!quiet) { + fprintf(outf, "0x%x CPUID levels; 0x%x xlevels; family:model:stepping 0x%x:%x:%x (%d:%d:%d)\n", + max_level, max_extended_level, family, model, stepping, family, model, stepping); + fprintf(outf, "CPUID(1): %s %s %s %s %s %s %s %s %s %s\n", + ecx_flags & (1 << 0) ? "SSE3" : "-", + ecx_flags & (1 << 3) ? "MONITOR" : "-", + ecx_flags & (1 << 6) ? "SMX" : "-", + ecx_flags & (1 << 7) ? "EIST" : "-", + ecx_flags & (1 << 8) ? "TM2" : "-", + edx_flags & (1 << 4) ? "TSC" : "-", + edx_flags & (1 << 5) ? "MSR" : "-", + edx_flags & (1 << 22) ? "ACPI-TM" : "-", + edx_flags & (1 << 28) ? "HT" : "-", + edx_flags & (1 << 29) ? "TM" : "-"); + } + if (genuine_intel) + model = intel_model_duplicates(model); + + if (!(edx_flags & (1 << 5))) + errx(1, "CPUID: no MSR"); + if (max_extended_level >= 0x80000007) { /* @@ -4576,9 +4600,6 @@ void process_cpuid() if (crystal_hz == 0) switch(model) { case INTEL_FAM6_SKYLAKE_MOBILE: /* SKL */ - case INTEL_FAM6_SKYLAKE_DESKTOP: /* SKL */ - case INTEL_FAM6_KABYLAKE_MOBILE: /* KBL */ - case INTEL_FAM6_KABYLAKE_DESKTOP: /* KBL */ crystal_hz = 24000000; /* 24.0 MHz */ break; case INTEL_FAM6_ATOM_GOLDMONT_X: /* DNV */ @@ -4860,6 +4881,8 @@ void topology_probe() return; for (i = 0; i <= topo.max_cpu_num; ++i) { + if (cpu_is_not_present(i)) + continue; fprintf(outf, "cpu %d pkg %d node %d lnode %d core %d thread %d\n", i, cpus[i].physical_package_id,