whiterose

linux unikernel
Log | Files | Refs | README | LICENSE | git clone https://git.ne02ptzero.me/git/whiterose

commit 24dc83635ffe3c93d8122099a83ee228c9b7e4f7
parent 7e59fad9c9d1aeacdc96dfffd35f9e12ddc34dbf
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date:   Fri, 28 Dec 2018 20:00:21 -0800

Merge tag 'gpio-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.21 kernel series.

  Core changes:

   - Some core changes are already in outside of this pull request as
     they came through the regulator tree, most notably
     devm_gpiod_unhinge() that removes devres refcount management from a
     GPIO descriptor. This is needed in subsystems such as regulators
     where the regulator core need to take over the reference counting
     and lifecycle management for a GPIO descriptor.

   - We dropped devm_gpiochip_remove() and devm_gpio_chip_match() as
     nothing needs it. We can bring it back if need be.

   - Add a global TODO so people see where we are going. This helps
     setting the direction now that we are two GPIO maintainers.

   - Handle the MMC CD/WP properties in the device tree core. (The bulk
     of patches activating this code is already merged through the
     MMC/SD tree.)

   - Augment gpiochip_request_own_desc() to pass a flag so we as
     gpiochips can request lines as active low or open drain etc even
     from ourselves.

  New drivers:

   - New driver for Cadence GPIO blocks.

   - New driver for Atmel SAMA5D2 PIOBU GPIO lines.

  Driver improvements:

   - A major refactoring of the PCA953x driver - this driver has been
     around for ages, and is now modernized to reduce code duplication
     that has stacked up and is using regmap to read write and cache
     registers.

   - Intel drivers are now maintained in a separate tree and start with
     a round of cleanups and unifications"

* tag 'gpio-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (99 commits)
  gpio: sama5d2-piobu: Depend on OF_GPIO
  gpio: Add Cadence GPIO driver
  dt-bindings: gpio: Add bindings for Cadence GPIO
  gpiolib-acpi: remove unused variable 'err', cleans up build warning
  gpio: mxs: read pin level directly instead of using .get
  gpio: aspeed: remove duplicated statement
  gpio: add driver for SAMA5D2 PIOBU pins
  dt-bindings: arm: atmel: describe SECUMOD usage as a GPIO controller
  gpio/mmc/of: Respect polarity in the device tree
  dt-bindings: gpio: rcar: Add r8a774c0 (RZ/G2E) support
  memory: omap-gpmc: Get the header of the enum
  ARM: omap1: Fix new user of gpiochip_request_own_desc()
  gpio: pca953x: Add regmap dependency for PCA953x driver
  gpio: raspberrypi-exp: decrease refcount on firmware dt node
  gpiolib: Fix return value of gpio_to_desc() stub if !GPIOLIB
  gpio: pca953x: Restore registers after suspend/resume cycle
  gpio: pca953x: Zap single use of pca953x_read_single()
  gpio: pca953x: Zap ad-hoc reg_output cache
  gpio: pca953x: Zap ad-hoc reg_direction cache
  gpio: pca953x: Perform basic regmap conversion
  ...

Diffstat:
MDocumentation/devicetree/bindings/arm/atmel-sysregs.txt | 12+++++++++++-
ADocumentation/devicetree/bindings/gpio/cdns,gpio.txt | 43+++++++++++++++++++++++++++++++++++++++++++
MDocumentation/devicetree/bindings/gpio/gpio-vf610.txt | 6++++++
MDocumentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt | 38+++++++++++++++++++++++++++++---------
MDocumentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt | 1+
MDocumentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt | 4++--
MDocumentation/driver-api/gpio/driver.rst | 4+++-
MDocumentation/driver-model/devres.txt | 1-
MMAINTAINERS | 7++++++-
March/arm/mach-omap1/ams-delta-fiq.c | 2+-
March/arm/mach-omap1/board-ams-delta.c | 4++--
Mdrivers/gpio/Kconfig | 22++++++++++++++++++++++
Mdrivers/gpio/Makefile | 2++
Adrivers/gpio/TODO | 109+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Mdrivers/gpio/gpio-104-dio-48e.c | 2+-
Mdrivers/gpio/gpio-104-idi-48.c | 2+-
Mdrivers/gpio/gpio-aspeed.c | 1-
Adrivers/gpio/gpio-cadence.c | 291++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Mdrivers/gpio/gpio-dwapb.c | 6++----
Mdrivers/gpio/gpio-gpio-mm.c | 2+-
Mdrivers/gpio/gpio-grgpio.c | 1-
Mdrivers/gpio/gpio-ich.c | 73+++++++++++++++++++++++++------------------------------------------------
Mdrivers/gpio/gpio-intel-mid.c | 16+++-------------
Mdrivers/gpio/gpio-ks8695.c | 15+++------------
Mdrivers/gpio/gpio-lpc18xx.c | 286++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----
Mdrivers/gpio/gpio-lynxpoint.c | 47+++++++++++++++++------------------------------
Mdrivers/gpio/gpio-merrifield.c | 6+-----
Mdrivers/gpio/gpio-mt7621.c | 10++++++++--
Mdrivers/gpio/gpio-mvebu.c | 2+-
Mdrivers/gpio/gpio-mxc.c | 41++++++++++++++++++++++++-----------------
Mdrivers/gpio/gpio-mxs.c | 2+-
Mdrivers/gpio/gpio-omap.c | 12++++--------
Mdrivers/gpio/gpio-pca953x.c | 484+++++++++++++++++++++++++++++++++++++++++++++++++------------------------------
Mdrivers/gpio/gpio-pch.c | 165+++++++++++++++++++------------------------------------------------------------
Mdrivers/gpio/gpio-pci-idio-16.c | 2+-
Mdrivers/gpio/gpio-pcie-idio-24.c | 2+-
Mdrivers/gpio/gpio-pl061.c | 21++++++++++-----------
Mdrivers/gpio/gpio-raspberrypi-exp.c | 1+
Mdrivers/gpio/gpio-rcar.c | 34++++++++++++----------------------
Adrivers/gpio/gpio-sama5d2-piobu.c | 253+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Mdrivers/gpio/gpio-sch.c | 27+++++++--------------------
Mdrivers/gpio/gpio-sch311x.c | 2+-
Mdrivers/gpio/gpio-sodaville.c | 73+++++++++++++++++++++++++------------------------------------------------
Mdrivers/gpio/gpio-tegra.c | 6++----
Mdrivers/gpio/gpio-tegra186.c | 6+++---
Mdrivers/gpio/gpio-uniphier.c | 17++++-------------
Mdrivers/gpio/gpio-vf610.c | 44++++++++++++++++++++++++++++++++++++++++++++
Mdrivers/gpio/gpio-ws16c48.c | 2+-
Mdrivers/gpio/gpio-zynq.c | 29+++++++++++++++++++++++++----
Mdrivers/gpio/gpiolib-acpi.c | 14+++-----------
Mdrivers/gpio/gpiolib-of.c | 26++++++++++++++++++++++++--
Mdrivers/gpio/gpiolib.c | 76++++++++++++++++++++++++++++++++++++++++------------------------------------
Mdrivers/hid/hid-cp2112.c | 2+-
Mdrivers/memory/omap-gpmc.c | 4+++-
Minclude/dt-bindings/gpio/tegra186-gpio.h | 41+++++++++++++++++++++++++++++++++++++++++
Minclude/linux/gpio/consumer.h | 8+++++---
Minclude/linux/gpio/driver.h | 10+++-------
57 files changed, 1741 insertions(+), 678 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt @@ -158,14 +158,24 @@ Security Module (SECUMOD) The Security Module macrocell provides all necessary secure functions to avoid voltage, temperature, frequency and mechanical attacks on the chip. It also -embeds secure memories that can be scrambled +embeds secure memories that can be scrambled. + +The Security Module also offers the PIOBU pins which can be used as GPIO pins. +Note that they maintain their voltage during Backup/Self-refresh. required properties: - compatible: Should be "atmel,<chip>-secumod", "syscon". <chip> can be "sama5d2". - reg: Should contain registers location and length +- gpio-controller: Marks the port as GPIO controller. +- #gpio-cells: There are 2. The pin number is the + first, the second represents additional + parameters such as GPIO_ACTIVE_HIGH/LOW. + secumod@fc040000 { compatible = "atmel,sama5d2-secumod", "syscon"; reg = <0xfc040000 0x100>; + gpio-controller; + #gpio-cells = <2>; }; diff --git a/Documentation/devicetree/bindings/gpio/cdns,gpio.txt b/Documentation/devicetree/bindings/gpio/cdns,gpio.txt @@ -0,0 +1,43 @@ +Cadence GPIO controller bindings + +Required properties: +- compatible: should be "cdns,gpio-r1p02". +- reg: the register base address and size. +- #gpio-cells: should be 2. + * first cell is the GPIO number. + * second cell specifies the GPIO flags, as defined in + <dt-bindings/gpio/gpio.h>. Only the GPIO_ACTIVE_HIGH + and GPIO_ACTIVE_LOW flags are supported. +- gpio-controller: marks the device as a GPIO controller. +- clocks: should contain one entry referencing the peripheral clock driving + the GPIO controller. + +Optional properties: +- ngpios: integer number of gpio lines supported by this controller, up to 32. +- interrupts: interrupt specifier for the controllers interrupt. +- interrupt-controller: marks the device as an interrupt controller. When + defined, interrupts, interrupt-parent and #interrupt-cells + are required. +- interrupt-cells: should be 2. + * first cell is the GPIO number you want to use as an IRQ source. + * second cell specifies the IRQ type, as defined in + <dt-bindings/interrupt-controller/irq.h>. + Currently only level sensitive IRQs are supported. + + +Example: + gpio0: gpio-controller@fd060000 { + compatible = "cdns,gpio-r1p02"; + reg =<0xfd060000 0x1000>; + + clocks = <&gpio_clk>; + + interrupt-parent = <&gic>; + interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-vf610.txt b/Documentation/devicetree/bindings/gpio/gpio-vf610.txt @@ -24,6 +24,12 @@ Required properties for GPIO node: 4 = active high level-sensitive. 8 = active low level-sensitive. +Optional properties: +-clocks: Must contain an entry for each entry in clock-names. + See common clock-bindings.txt for details. +-clock-names: A list of clock names. For imx7ulp, it must contain + "gpio", "port". + Note: Each GPIO port should have an alias correctly numbered in "aliases" node. diff --git a/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt b/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt @@ -3,12 +3,24 @@ NXP LPC18xx/43xx GPIO controller Device Tree Bindings Required properties: - compatible : Should be "nxp,lpc1850-gpio" -- reg : Address and length of the register set for the device -- clocks : Clock specifier (see clock bindings for details) -- gpio-controller : Marks the device node as a GPIO controller. -- #gpio-cells : Should be two - - First cell is the GPIO line number - - Second cell is used to specify polarity +- reg : List of addresses and lengths of the GPIO controller + register sets +- reg-names : Should be "gpio", "gpio-pin-ic", "gpio-group0-ic" and + "gpio-gpoup1-ic" +- clocks : Phandle and clock specifier pair for GPIO controller +- resets : Phandle and reset specifier pair for GPIO controller +- gpio-controller : Marks the device node as a GPIO controller +- #gpio-cells : Should be two: + - The first cell is the GPIO line number + - The second cell is used to specify polarity +- interrupt-controller : Marks the device node as an interrupt controller +- #interrupt-cells : Should be two: + - The first cell is an interrupt number within + 0..9 range, for GPIO pin interrupts it is equal + to 'nxp,gpio-pin-interrupt' property value of + GPIO pin configuration, 8 is for GPIO GROUP0 + interrupt, 9 is for GPIO GROUP1 interrupt + - The second cell is used to specify interrupt type Optional properties: - gpio-ranges : Mapping between GPIO and pinctrl @@ -19,21 +31,29 @@ Example: gpio: gpio@400f4000 { compatible = "nxp,lpc1850-gpio"; - reg = <0x400f4000 0x4000>; + reg = <0x400f4000 0x4000>, <0x40087000 0x1000>, + <0x40088000 0x1000>, <0x40089000 0x1000>; + reg-names = "gpio", "gpio-pin-ic", + "gpio-group0-ic", "gpio-gpoup1-ic"; clocks = <&ccu1 CLK_CPU_GPIO>; + resets = <&rgu 28>; gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; gpio-ranges = <&pinctrl LPC_GPIO(0,0) LPC_PIN(0,0) 2>, ... <&pinctrl LPC_GPIO(7,19) LPC_PIN(f,5) 7>; }; gpio_joystick { - compatible = "gpio-keys-polled"; + compatible = "gpio-keys"; ... - button@0 { + button0 { ... + interrupt-parent = <&gpio>; + interrupts = <1 IRQ_TYPE_EDGE_BOTH>; gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>; }; }; diff --git a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt @@ -8,6 +8,7 @@ Required Properties: - "renesas,gpio-r8a7745": for R8A7745 (RZ/G1E) compatible GPIO controller. - "renesas,gpio-r8a77470": for R8A77470 (RZ/G1C) compatible GPIO controller. - "renesas,gpio-r8a774a1": for R8A774A1 (RZ/G2M) compatible GPIO controller. + - "renesas,gpio-r8a774c0": for R8A774C0 (RZ/G2E) compatible GPIO controller. - "renesas,gpio-r8a7778": for R8A7778 (R-Car M1) compatible GPIO controller. - "renesas,gpio-r8a7779": for R8A7779 (R-Car H1) compatible GPIO controller. - "renesas,gpio-r8a7790": for R8A7790 (R-Car H2) compatible GPIO controller. diff --git a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt @@ -43,7 +43,7 @@ gpio: gpio@20000 { #address-cells = <1>; #size-cells = <0>; - porta: gpio-controller@0 { + porta: gpio@0 { compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; @@ -55,7 +55,7 @@ gpio: gpio@20000 { interrupts = <0>; }; - portb: gpio-controller@1 { + portb: gpio@1 { compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; diff --git a/Documentation/driver-api/gpio/driver.rst b/Documentation/driver-api/gpio/driver.rst @@ -434,7 +434,9 @@ try_module_get()). A GPIO driver can use the following functions instead to request and free descriptors without being pinned to the kernel forever:: struct gpio_desc *gpiochip_request_own_desc(struct gpio_desc *desc, - const char *label) + u16 hwnum, + const char *label, + enum gpiod_flags flags) void gpiochip_free_own_desc(struct gpio_desc *desc) diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt @@ -256,7 +256,6 @@ GPIO devm_gpiod_put() devm_gpiod_unhinge() devm_gpiochip_add_data() - devm_gpiochip_remove() devm_gpio_request() devm_gpio_request_one() devm_gpio_free() diff --git a/MAINTAINERS b/MAINTAINERS @@ -6412,7 +6412,6 @@ F: drivers/media/rc/gpio-ir-tx.c GPIO MOCKUP DRIVER M: Bamvor Jian Zhang <bamv2005@gmail.com> -R: Bartosz Golaszewski <brgl@bgdev.pl> L: linux-gpio@vger.kernel.org S: Maintained F: drivers/gpio/gpio-mockup.c @@ -9933,6 +9932,12 @@ M: Nicolas Ferre <nicolas.ferre@microchip.com> S: Supported F: drivers/power/reset/at91-sama5d2_shdwc.c +MICROCHIP SAMA5D2-COMPATIBLE PIOBU GPIO +M: Andrei Stefanescu <andrei.stefanescu@microchip.com> +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +L: linux-gpio@vger.kernel.org +F: drivers/gpio/gpio-sama5d2-piobu.c + MICROCHIP SPI DRIVER M: Nicolas Ferre <nicolas.ferre@microchip.com> S: Supported diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c @@ -103,7 +103,7 @@ void __init ams_delta_init_fiq(struct gpio_chip *chip, } for (i = 0; i < ARRAY_SIZE(irq_data); i++) { - gpiod = gpiochip_request_own_desc(chip, i, pin_name[i]); + gpiod = gpiochip_request_own_desc(chip, i, pin_name[i], 0); if (IS_ERR(gpiod)) { pr_err("%s: failed to get GPIO pin %d (%ld)\n", __func__, i, PTR_ERR(gpiod)); diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c @@ -601,7 +601,7 @@ static void __init modem_assign_irq(struct gpio_chip *chip) struct gpio_desc *gpiod; gpiod = gpiochip_request_own_desc(chip, AMS_DELTA_GPIO_PIN_MODEM_IRQ, - "modem_irq"); + "modem_irq", 0); if (IS_ERR(gpiod)) { pr_err("%s: modem IRQ GPIO request failed (%ld)\n", __func__, PTR_ERR(gpiod)); @@ -809,7 +809,7 @@ static void __init ams_delta_led_init(struct gpio_chip *chip) int i; for (i = LATCH1_PIN_LED_CAMERA; i < LATCH1_PIN_DOCKIT1; i++) { - gpiod = gpiochip_request_own_desc(chip, i, NULL); + gpiod = gpiochip_request_own_desc(chip, i, "camera-led", 0); if (IS_ERR(gpiod)) { pr_warn("%s: %s GPIO %d request failed (%ld)\n", __func__, LATCH1_LABEL, i, PTR_ERR(gpiod)); diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig @@ -160,6 +160,14 @@ config GPIO_BRCMSTB help Say yes here to enable GPIO support for Broadcom STB (BCM7XXX) SoCs. +config GPIO_CADENCE + tristate "Cadence GPIO support" + depends on OF_GPIO + select GPIO_GENERIC + select GPIOLIB_IRQCHIP + help + Say yes here to enable support for Cadence GPIO controller. + config GPIO_CLPS711X tristate "CLPS711X GPIO support" depends on ARCH_CLPS711X || COMPILE_TEST @@ -288,6 +296,7 @@ config GPIO_LPC18XX tristate "NXP LPC18XX/43XX GPIO support" default y if ARCH_LPC18XX depends on OF_GPIO && (ARCH_LPC18XX || COMPILE_TEST) + select IRQ_DOMAIN_HIERARCHY help Select this option to enable GPIO driver for NXP LPC18XX/43XX devices. @@ -429,6 +438,18 @@ config GPIO_REG A 32-bit single register GPIO fixed in/out implementation. This can be used to represent any register as a set of GPIO signals. +config GPIO_SAMA5D2_PIOBU + tristate "SAMA5D2 PIOBU GPIO support" + depends on MFD_SYSCON + depends on OF_GPIO + select GPIO_SYSCON + help + Say yes here to use the PIOBU pins as GPIOs. + + PIOBU pins on the SAMA5D2 can be used as GPIOs. + The difference from regular GPIOs is that they + maintain their value during backup/self-refresh. + config GPIO_SIOX tristate "SIOX GPIO support" depends on SIOX @@ -849,6 +870,7 @@ config GPIO_MC9S08DZ60 config GPIO_PCA953X tristate "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports" + select REGMAP_I2C help Say yes here to provide access to several register-oriented SMBus I/O expanders, made mostly by NXP or TI. Compatible diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile @@ -37,6 +37,7 @@ obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o obj-$(CONFIG_GPIO_BD9571MWV) += gpio-bd9571mwv.o obj-$(CONFIG_GPIO_BRCMSTB) += gpio-brcmstb.o obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o +obj-$(CONFIG_GPIO_CADENCE) += gpio-cadence.o obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o obj-$(CONFIG_GPIO_CRYSTAL_COVE) += gpio-crystalcove.o @@ -108,6 +109,7 @@ obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o obj-$(CONFIG_GPIO_REG) += gpio-reg.o obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o +obj-$(CONFIG_GPIO_SAMA5D2_PIOBU) += gpio-sama5d2-piobu.o obj-$(CONFIG_GPIO_SCH) += gpio-sch.o obj-$(CONFIG_GPIO_SCH311X) += gpio-sch311x.o obj-$(CONFIG_GPIO_SNPS_CREG) += gpio-creg-snps.o diff --git a/drivers/gpio/TODO b/drivers/gpio/TODO @@ -0,0 +1,109 @@ +This is a place for planning the ongoing long-term work in the GPIO +subsystem. + + +GPIO descriptors + +Starting with commit 79a9becda894 the GPIO subsystem embarked on a journey +to move away from the global GPIO numberspace and toward a decriptor-based +approach. This means that GPIO consumers, drivers and machine descriptions +ideally have no use or idea of the global GPIO numberspace that has/was +used in the inception of the GPIO subsystem. + +Work items: + +- Convert all GPIO device drivers to only #include <linux/gpio/driver.h> + +- Convert all consumer drivers to only #include <linux/gpio/consumer.h> + +- Convert all machine descriptors in "boardfiles" to only + #include <linux/gpio/machine.h>, the other option being to convert it + to a machine description such as device tree, ACPI or fwnode that + implicitly does not use global GPIO numbers. + +- When this work is complete (will require some of the items in the + following ongoing work as well) we can delete the old global + numberspace accessors from <linux/gpio.h> and eventually delete + <linux/gpio.h> altogether. + + +Get rid of <linux/of_gpio.h> + +This header and helpers appeared at one point when there was no proper +driver infrastructure for doing simpler MMIO GPIO devices and there was +no core support for parsing device tree GPIOs from the core library with +the [devm_]gpiod_get() calls we have today that will implicitly go into +the device tree back-end. + +Work items: + +- Get rid of struct of_mm_gpio_chip altogether: use the generic MMIO + GPIO for all current users (see below). Delete struct of_mm_gpio_chip, + to_of_mm_gpio_chip(), of_mm_gpiochip_add_data(), of_mm_gpiochip_add() + of_mm_gpiochip_remove() from the kernel. + +- Change all consumer drivers that #include <linux/of_gpio.h> to + #include <linux/gpio/consumer.h> and stop doing custom parsing of the + GPIO lines from the device tree. This can be tricky and often ivolves + changing boardfiles, etc. + +- Pull semantics for legacy device tree (OF) GPIO lookups into + gpiolib-of.c: in some cases subsystems are doing custom flags and + lookups for polarity inversion, open drain and what not. As we now + handle this with generic OF bindings, pull all legacy handling into + gpiolib so the library API becomes narrow and deep and handle all + legacy bindings internally. (See e.g. commits 6953c57ab172, + 6a537d48461d etc) + +- Delete <linux/of_gpio.h> when all the above is complete and everything + uses <linux/gpio/consumer.h> or <linux/gpio/driver.h> instead. + + +Collect drivers + +Collect GPIO drivers from arch/* and other places that should be placed +in drivers/gpio/gpio-*. Augment platforms to create platform devices or +similar and probe a proper driver in the gpiolib subsystem. + +In some cases it makes sense to create a GPIO chip from the local driver +for a few GPIOs. Those should stay where they are. + + +Generic MMIO GPIO + +The GPIO drivers can utilize the generic MMIO helper library in many +cases, and the helper library should be as helpful as possible for MMIO +drivers. (drivers/gpio/gpio-mmio.c) + +Work items: + +- Look over and identify any remaining easily converted drivers and + dry-code conversions to MMIO GPIO for maintainers to test + +- Expand the MMIO GPIO or write a new library for port-mapped I/O + helpers (x86 inb()/outb()) and convert port-mapped I/O drivers to use + this with dry-coding and sending to maintainers to test + + +GPIOLIB irqchip + +The GPIOLIB irqchip is a helper irqchip for "simple cases" that should +try to cover any generic kind of irqchip cascaded from a GPIO. + +- Look over and identify any remaining easily converted drivers and + dry-code conversions to gpiolib irqchip for maintainers to test + +- Support generic hierarchical GPIO interrupts: these are for the + non-cascading case where there is one IRQ per GPIO line, there is + currently no common infrastructure for this. + + +Increase integration with pin control + +There are already ways to use pin control as back-end for GPIO and +it may make sense to bring these subsystems closer. One reason for +creating pin control as its own subsystem was that we could avoid any +use of the global GPIO numbers. Once the above is complete, it may +make sense to simply join the subsystems into one and make pin +multiplexing, pin configuration, GPIO, etc selectable options in one +and the same pin control and GPIO subsystem. diff --git a/drivers/gpio/gpio-104-dio-48e.c b/drivers/gpio/gpio-104-dio-48e.c @@ -222,7 +222,7 @@ static int dio48e_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask, port_state = inb(dio48egpio->base + ports[i]); /* store acquired bits at respective bits array offset */ - bits[word_index] |= port_state << word_offset; + bits[word_index] |= (port_state << word_offset) & word_mask; } return 0; diff --git a/drivers/gpio/gpio-104-idi-48.c b/drivers/gpio/gpio-104-idi-48.c @@ -128,7 +128,7 @@ static int idi_48_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask, port_state = inb(idi48gpio->base + ports[i]); /* store acquired bits at respective bits array offset */ - bits[word_index] |= port_state << word_offset; + bits[word_index] |= (port_state << word_offset) & word_mask; } return 0; diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c @@ -1185,7 +1185,6 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev) gpio->chip.parent = &pdev->dev; gpio->chip.ngpio = gpio->config->nr_gpios; - gpio->chip.parent = &pdev->dev; gpio->chip.direction_input = aspeed_gpio_dir_in; gpio->chip.direction_output = aspeed_gpio_dir_out; gpio->chip.get_direction = aspeed_gpio_get_direction; diff --git a/drivers/gpio/gpio-cadence.c b/drivers/gpio/gpio-cadence.c @@ -0,0 +1,291 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* + * Copyright 2017-2018 Cadence + * + * Authors: + * Jan Kotas <jank@cadence.com> + * Boris Brezillon <boris.brezillon@free-electrons.com> + */ + +#include <linux/gpio/driver.h> +#include <linux/clk.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> + +#define CDNS_GPIO_BYPASS_MODE 0x00 +#define CDNS_GPIO_DIRECTION_MODE 0x04 +#define CDNS_GPIO_OUTPUT_EN 0x08 +#define CDNS_GPIO_OUTPUT_VALUE 0x0c +#define CDNS_GPIO_INPUT_VALUE 0x10 +#define CDNS_GPIO_IRQ_MASK 0x14 +#define CDNS_GPIO_IRQ_EN 0x18 +#define CDNS_GPIO_IRQ_DIS 0x1c +#define CDNS_GPIO_IRQ_STATUS 0x20 +#define CDNS_GPIO_IRQ_TYPE 0x24 +#define CDNS_GPIO_IRQ_VALUE 0x28 +#define CDNS_GPIO_IRQ_ANY_EDGE 0x2c + +struct cdns_gpio_chip { + struct gpio_chip gc; + struct clk *pclk; + void __iomem *regs; + u32 bypass_orig; +}; + +static int cdns_gpio_request(struct gpio_chip *chip, unsigned int offset) +{ + struct cdns_gpio_chip *cgpio = gpiochip_get_data(chip); + unsigned long flags; + + spin_lock_irqsave(&chip->bgpio_lock, flags); + + iowrite32(ioread32(cgpio->regs + CDNS_GPIO_BYPASS_MODE) & ~BIT(offset), + cgpio->regs + CDNS_GPIO_BYPASS_MODE); + + spin_unlock_irqrestore(&chip->bgpio_lock, flags); + return 0; +} + +static void cdns_gpio_free(struct gpio_chip *chip, unsigned int offset) +{ + struct cdns_gpio_chip *cgpio = gpiochip_get_data(chip); + unsigned long flags; + + spin_lock_irqsave(&chip->bgpio_lock, flags); + + iowrite32(ioread32(cgpio->regs + CDNS_GPIO_BYPASS_MODE) | + (BIT(offset) & cgpio->bypass_orig), + cgpio->regs + CDNS_GPIO_BYPASS_MODE); + + spin_unlock_irqrestore(&chip->bgpio_lock, flags); +} + +static void cdns_gpio_irq_mask(struct irq_data *d) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(d); + struct cdns_gpio_chip *cgpio = gpiochip_get_data(chip); + + iowrite32(BIT(d->hwirq), cgpio->regs + CDNS_GPIO_IRQ_DIS); +} + +static void cdns_gpio_irq_unmask(struct irq_data *d) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(d); + struct cdns_gpio_chip *cgpio = gpiochip_get_data(chip); + + iowrite32(BIT(d->hwirq), cgpio->regs + CDNS_GPIO_IRQ_EN); +} + +static int cdns_gpio_irq_set_type(struct irq_data *d, unsigned int type) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(d); + struct cdns_gpio_chip *cgpio = gpiochip_get_data(chip); + unsigned long flags; + u32 int_value; + u32 int_type; + u32 mask = BIT(d->hwirq); + int ret = 0; + + spin_lock_irqsave(&chip->bgpio_lock, flags); + + int_value = ioread32(cgpio->regs + CDNS_GPIO_IRQ_VALUE) & ~mask; + int_type = ioread32(cgpio->regs + CDNS_GPIO_IRQ_TYPE) & ~mask; + + /* + * The GPIO controller doesn't have an ACK register. + * All interrupt statuses are cleared on a status register read. + * Don't support edge interrupts for now. + */ + + if (type == IRQ_TYPE_LEVEL_HIGH) { + int_type |= mask; + int_value |= mask; + } else if (type == IRQ_TYPE_LEVEL_LOW) { + int_type |= mask; + } else { + ret = -EINVAL; + goto err_irq_type; + } + + iowrite32(int_value, cgpio->regs + CDNS_GPIO_IRQ_VALUE); + iowrite32(int_type, cgpio->regs + CDNS_GPIO_IRQ_TYPE); + +err_irq_type: + spin_unlock_irqrestore(&chip->bgpio_lock, flags); + return ret; +} + +static void cdns_gpio_irq_handler(struct irq_desc *desc) +{ + struct gpio_chip *chip = irq_desc_get_handler_data(desc); + struct cdns_gpio_chip *cgpio = gpiochip_get_data(chip); + struct irq_chip *irqchip = irq_desc_get_chip(desc); + unsigned long status; + int hwirq; + + chained_irq_enter(irqchip, desc); + + status = ioread32(cgpio->regs + CDNS_GPIO_IRQ_STATUS) & + ~ioread32(cgpio->regs + CDNS_GPIO_IRQ_MASK); + + for_each_set_bit(hwirq, &status, chip->ngpio) + generic_handle_irq(irq_find_mapping(chip->irq.domain, hwirq)); + + chained_irq_exit(irqchip, desc); +} + +static struct irq_chip cdns_gpio_irqchip = { + .name = "cdns-gpio", + .irq_mask = cdns_gpio_irq_mask, + .irq_unmask = cdns_gpio_irq_unmask, + .irq_set_type = cdns_gpio_irq_set_type +}; + +static int cdns_gpio_probe(struct platform_device *pdev) +{ + struct cdns_gpio_chip *cgpio; + struct resource *res; + int ret, irq; + u32 dir_prev; + u32 num_gpios = 32; + + cgpio = devm_kzalloc(&pdev->dev, sizeof(*cgpio), GFP_KERNEL); + if (!cgpio) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + cgpio->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(cgpio->regs)) + return PTR_ERR(cgpio->regs); + + of_property_read_u32(pdev->dev.of_node, "ngpios", &num_gpios); + + if (num_gpios > 32) { + dev_err(&pdev->dev, "ngpios must be less or equal 32\n"); + return -EINVAL; + } + + /* + * Set all pins as inputs by default, otherwise: + * gpiochip_lock_as_irq: + * tried to flag a GPIO set as output for IRQ + * Generic GPIO driver stores the direction value internally, + * so it needs to be changed before bgpio_init() is called. + */ + dir_prev = ioread32(cgpio->regs + CDNS_GPIO_DIRECTION_MODE); + iowrite32(GENMASK(num_gpios - 1, 0), + cgpio->regs + CDNS_GPIO_DIRECTION_MODE); + + ret = bgpio_init(&cgpio->gc, &pdev->dev, 4, + cgpio->regs + CDNS_GPIO_INPUT_VALUE, + cgpio->regs + CDNS_GPIO_OUTPUT_VALUE, + NULL, + NULL, + cgpio->regs + CDNS_GPIO_DIRECTION_MODE, + BGPIOF_READ_OUTPUT_REG_SET); + if (ret) { + dev_err(&pdev->dev, "Failed to register generic gpio, %d\n", + ret); + goto err_revert_dir; + } + + cgpio->gc.label = dev_name(&pdev->dev); + cgpio->gc.ngpio = num_gpios; + cgpio->gc.parent = &pdev->dev; + cgpio->gc.base = -1; + cgpio->gc.owner = THIS_MODULE; + cgpio->gc.request = cdns_gpio_request; + cgpio->gc.free = cdns_gpio_free; + + cgpio->pclk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(cgpio->pclk)) { + ret = PTR_ERR(cgpio->pclk); + dev_err(&pdev->dev, + "Failed to retrieve peripheral clock, %d\n", ret); + goto err_revert_dir; + } + + ret = clk_prepare_enable(cgpio->pclk); + if (ret) { + dev_err(&pdev->dev, + "Failed to enable the peripheral clock, %d\n", ret); + goto err_revert_dir; + } + + ret = devm_gpiochip_add_data(&pdev->dev, &cgpio->gc, cgpio); + if (ret < 0) { + dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret); + goto err_disable_clk; + } + + /* + * irq_chip support + */ + irq = platform_get_irq(pdev, 0); + if (irq >= 0) { + ret = gpiochip_irqchip_add(&cgpio->gc, &cdns_gpio_irqchip, + 0, handle_level_irq, + IRQ_TYPE_NONE); + if (ret) { + dev_err(&pdev->dev, "Could not add irqchip, %d\n", + ret); + goto err_disable_clk; + } + gpiochip_set_chained_irqchip(&cgpio->gc, &cdns_gpio_irqchip, + irq, cdns_gpio_irq_handler); + } + + cgpio->bypass_orig = ioread32(cgpio->regs + CDNS_GPIO_BYPASS_MODE); + + /* + * Enable gpio outputs, ignored for input direction + */ + iowrite32(GENMASK(num_gpios - 1, 0), + cgpio->regs + CDNS_GPIO_OUTPUT_EN); + iowrite32(0, cgpio->regs + CDNS_GPIO_BYPASS_MODE); + + platform_set_drvdata(pdev, cgpio); + return 0; + +err_disable_clk: + clk_disable_unprepare(cgpio->pclk); + +err_revert_dir: + iowrite32(dir_prev, cgpio->regs + CDNS_GPIO_DIRECTION_MODE); + + return ret; +} + +static int cdns_gpio_remove(struct platform_device *pdev) +{ + struct cdns_gpio_chip *cgpio = platform_get_drvdata(pdev); + + iowrite32(cgpio->bypass_orig, cgpio->regs + CDNS_GPIO_BYPASS_MODE); + clk_disable_unprepare(cgpio->pclk); + + return 0; +} + +static const struct of_device_id cdns_of_ids[] = { + { .compatible = "cdns,gpio-r1p02" }, + { /* sentinel */ }, +}; + +static struct platform_driver cdns_gpio_driver = { + .driver = { + .name = "cdns-gpio", + .of_match_table = cdns_of_ids, + }, + .probe = cdns_gpio_probe, + .remove = cdns_gpio_remove, +}; +module_platform_driver(cdns_gpio_driver); + +MODULE_AUTHOR("Jan Kotas <jank@cadence.com>"); +MODULE_DESCRIPTION("Cadence GPIO driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:cdns-gpio"); diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c @@ -748,8 +748,7 @@ static int dwapb_gpio_remove(struct platform_device *pdev) #ifdef CONFIG_PM_SLEEP static int dwapb_gpio_suspend(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct dwapb_gpio *gpio = platform_get_drvdata(pdev); + struct dwapb_gpio *gpio = dev_get_drvdata(dev); struct gpio_chip *gc = &gpio->ports[0].gc; unsigned long flags; int i; @@ -793,8 +792,7 @@ static int dwapb_gpio_suspend(struct device *dev) static int dwapb_gpio_resume(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct dwapb_gpio *gpio = platform_get_drvdata(pdev); + struct dwapb_gpio *gpio = dev_get_drvdata(dev); struct gpio_chip *gc = &gpio->ports[0].gc; unsigned long flags; int i; diff --git a/drivers/gpio/gpio-gpio-mm.c b/drivers/gpio/gpio-gpio-mm.c @@ -211,7 +211,7 @@ static int gpiomm_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask, port_state = inb(gpiommgpio->base + ports[i]); /* store acquired bits at respective bits array offset */ - bits[word_index] |= port_state << word_offset; + bits[word_index] |= (port_state << word_offset) & word_mask; } return 0; diff --git a/drivers/gpio/gpio-grgpio.c b/drivers/gpio/gpio-grgpio.c @@ -30,7 +30,6 @@ #include <linux/gpio/driver.h> #include <linux/slab.h> #include <linux/err.h> -#include <linux/gpio/driver.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/irqdomain.h> diff --git a/drivers/gpio/gpio-ich.c b/drivers/gpio/gpio-ich.c @@ -1,32 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Intel ICH6-10, Series 5 and 6, Atom C2000 (Avoton/Rangeley) GPIO driver * * Copyright (C) 2010 Extreme Engineering Solutions. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include <linux/bitops.h> +#include <linux/gpio/driver.h> #include <linux/ioport.h> +#include <linux/mfd/lpc_ich.h> #include <linux/module.h> #include <linux/pci.h> -#include <linux/gpio/driver.h> #include <linux/platform_device.h> -#include <linux/mfd/lpc_ich.h> -#include <linux/bitops.h> #define DRV_NAME "gpio_ich" @@ -100,7 +86,7 @@ struct ichx_desc { static struct { spinlock_t lock; - struct platform_device *dev; + struct device *dev; struct gpio_chip chip; struct resource *gpio_base; /* GPIO IO base */ struct resource *pm_base; /* Power Mangagment IO base */ @@ -112,8 +98,7 @@ static struct { static int modparam_gpiobase = -1; /* dynamic */ module_param_named(gpiobase, modparam_gpiobase, int, 0444); -MODULE_PARM_DESC(gpiobase, "The GPIO number base. -1 means dynamic, " - "which is the default."); +MODULE_PARM_DESC(gpiobase, "The GPIO number base. -1 means dynamic, which is the default."); static int ichx_write_bit(int reg, unsigned nr, int val, int verify) { @@ -121,7 +106,6 @@ static int ichx_write_bit(int reg, unsigned nr, int val, int verify) u32 data, tmp; int reg_nr = nr / 32; int bit = nr & 0x1f; - int ret = 0; spin_lock_irqsave(&ichx_priv.lock, flags); @@ -142,12 +126,10 @@ static int ichx_write_bit(int reg, unsigned nr, int val, int verify) tmp = ICHX_READ(ichx_priv.desc->regs[reg][reg_nr], ichx_priv.gpio_base); - if (verify && data != tmp) - ret = -EPERM; spin_unlock_irqrestore(&ichx_priv.lock, flags); - return ret; + return (verify && data != tmp) ? -EPERM : 0; } static int ichx_read_bit(int reg, unsigned nr) @@ -186,10 +168,7 @@ static int ichx_gpio_direction_input(struct gpio_chip *gpio, unsigned nr) * Try setting pin as an input and verify it worked since many pins * are output-only. */ - if (ichx_write_bit(GPIO_IO_SEL, nr, 1, 1)) - return -EINVAL; - - return 0; + return ichx_write_bit(GPIO_IO_SEL, nr, 1, 1); } static int ichx_gpio_direction_output(struct gpio_chip *gpio, unsigned nr, @@ -206,10 +185,7 @@ static int ichx_gpio_direction_output(struct gpio_chip *gpio, unsigned nr, * Try setting pin as an output and verify it worked since many pins * are input-only. */ - if (ichx_write_bit(GPIO_IO_SEL, nr, 0, 1)) - return -EINVAL; - - return 0; + return ichx_write_bit(GPIO_IO_SEL, nr, 0, 1); } static int ichx_gpio_get(struct gpio_chip *chip, unsigned nr) @@ -284,7 +260,7 @@ static void ichx_gpiolib_setup(struct gpio_chip *chip) { chip->owner = THIS_MODULE; chip->label = DRV_NAME; - chip->parent = &ichx_priv.dev->dev; + chip->parent = ichx_priv.dev; /* Allow chip-specific overrides of request()/get() */ chip->request = ichx_priv.desc->request ? @@ -407,15 +383,14 @@ static int ichx_gpio_request_regions(struct device *dev, static int ichx_gpio_probe(struct platform_device *pdev) { + struct device *dev = &pdev->dev; + struct lpc_ich_info *ich_info = dev_get_platdata(dev); struct resource *res_base, *res_pm; int err; - struct lpc_ich_info *ich_info = dev_get_platdata(&pdev->dev); if (!ich_info) return -ENODEV; - ichx_priv.dev = pdev; - switch (ich_info->gpio_version) { case ICH_I3100_GPIO: ichx_priv.desc = &i3100_desc; @@ -445,19 +420,21 @@ static int ichx_gpio_probe(struct platform_device *pdev) return -ENODEV; } + ichx_priv.dev = dev; spin_lock_init(&ichx_priv.lock); + res_base = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_GPIO); - ichx_priv.use_gpio = ich_info->use_gpio; - err = ichx_gpio_request_regions(&pdev->dev, res_base, pdev->name, - ichx_priv.use_gpio); + err = ichx_gpio_request_regions(dev, res_base, pdev->name, + ich_info->use_gpio); if (err) return err; ichx_priv.gpio_base = res_base; + ichx_priv.use_gpio = ich_info->use_gpio; /* * If necessary, determine the I/O address of ACPI/power management - * registers which are needed to read the the GPE0 register for GPI pins + * registers which are needed to read the GPE0 register for GPI pins * 0 - 15 on some chipsets. */ if (!ichx_priv.desc->uses_gpe0) @@ -465,13 +442,13 @@ static int ichx_gpio_probe(struct platform_device *pdev) res_pm = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_GPE0); if (!res_pm) { - pr_warn("ACPI BAR is unavailable, GPI 0 - 15 unavailable\n"); + dev_warn(dev, "ACPI BAR is unavailable, GPI 0 - 15 unavailable\n"); goto init; } - if (!devm_request_region(&pdev->dev, res_pm->start, - resource_size(res_pm), pdev->name)) { - pr_warn("ACPI BAR is busy, GPI 0 - 15 unavailable\n"); + if (!devm_request_region(dev, res_pm->start, resource_size(res_pm), + pdev->name)) { + dev_warn(dev, "ACPI BAR is busy, GPI 0 - 15 unavailable\n"); goto init; } @@ -481,12 +458,12 @@ init: ichx_gpiolib_setup(&ichx_priv.chip); err = gpiochip_add_data(&ichx_priv.chip, NULL); if (err) { - pr_err("Failed to register GPIOs\n"); + dev_err(dev, "Failed to register GPIOs\n"); return err; } - pr_info("GPIO from %d to %d on %s\n", ichx_priv.chip.base, - ichx_priv.chip.base + ichx_priv.chip.ngpio - 1, DRV_NAME); + dev_info(dev, "GPIO from %d to %d\n", ichx_priv.chip.base, + ichx_priv.chip.base + ichx_priv.chip.ngpio - 1); return 0; } diff --git a/drivers/gpio/gpio-intel-mid.c b/drivers/gpio/gpio-intel-mid.c @@ -1,16 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Intel MID GPIO driver * * Copyright (c) 2008-2014,2016 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ /* Supports: @@ -20,12 +12,11 @@ */ #include <linux/delay.h> +#include <linux/gpio/driver.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/io.h> -#include <linux/gpio/driver.h> #include <linux/kernel.h> -#include <linux/module.h> #include <linux/pci.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> @@ -273,9 +264,8 @@ static const struct pci_device_id intel_gpio_ids[] = { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x08f7), .driver_data = (kernel_ulong_t)&gpio_cloverview_core, }, - { 0 } + { } }; -MODULE_DEVICE_TABLE(pci, intel_gpio_ids); static void intel_mid_irq_handler(struct irq_desc *desc) { diff --git a/drivers/gpio/gpio-ks8695.c b/drivers/gpio/gpio-ks8695.c @@ -282,22 +282,13 @@ static int ks8695_gpio_show(struct seq_file *s, void *unused) return 0; } -static int ks8695_gpio_open(struct inode *inode, struct file *file) -{ - return single_open(file, ks8695_gpio_show, NULL); -} - -static const struct file_operations ks8695_gpio_operations = { - .open = ks8695_gpio_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; +DEFINE_SHOW_ATTRIBUTE(ks8695_gpio); static int __init ks8695_gpio_debugfs_init(void) { /* /sys/kernel/debug/ks8695_gpio */ - (void) debugfs_create_file("ks8695_gpio", S_IFREG | S_IRUGO, NULL, NULL, &ks8695_gpio_operations); + debugfs_create_file("ks8695_gpio", S_IFREG | S_IRUGO, NULL, NULL, + &ks8695_gpio_fops); return 0; } postcore_initcall(ks8695_gpio_debugfs_init); diff --git a/drivers/gpio/gpio-lpc18xx.c b/drivers/gpio/gpio-lpc18xx.c @@ -1,20 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0 /* * GPIO driver for NXP LPC18xx/43xx. * + * Copyright (C) 2018 Vladimir Zapolskiy <vz@mleia.com> * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <linux/clk.h> #include <linux/gpio/driver.h> #include <linux/io.h> +#include <linux/irqdomain.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/of_address.h> #include <linux/of_gpio.h> +#include <linux/of_irq.h> #include <linux/pinctrl/consumer.h> #include <linux/platform_device.h> @@ -24,13 +25,246 @@ #define LPC18XX_MAX_PORTS 8 #define LPC18XX_PINS_PER_PORT 32 +/* LPC18xx GPIO pin interrupt controller register offsets */ +#define LPC18XX_GPIO_PIN_IC_ISEL 0x00 +#define LPC18XX_GPIO_PIN_IC_IENR 0x04 +#define LPC18XX_GPIO_PIN_IC_SIENR 0x08 +#define LPC18XX_GPIO_PIN_IC_CIENR 0x0c +#define LPC18XX_GPIO_PIN_IC_IENF 0x10 +#define LPC18XX_GPIO_PIN_IC_SIENF 0x14 +#define LPC18XX_GPIO_PIN_IC_CIENF 0x18 +#define LPC18XX_GPIO_PIN_IC_RISE 0x1c +#define LPC18XX_GPIO_PIN_IC_FALL 0x20 +#define LPC18XX_GPIO_PIN_IC_IST 0x24 + +#define NR_LPC18XX_GPIO_PIN_IC_IRQS 8 + +struct lpc18xx_gpio_pin_ic { + void __iomem *base; + struct irq_domain *domain; + struct raw_spinlock lock; +}; + struct lpc18xx_gpio_chip { struct gpio_chip gpio; void __iomem *base; struct clk *clk; + struct lpc18xx_gpio_pin_ic *pin_ic; spinlock_t lock; }; +static inline void lpc18xx_gpio_pin_ic_isel(struct lpc18xx_gpio_pin_ic *ic, + u32 pin, bool set) +{ + u32 val = readl_relaxed(ic->base + LPC18XX_GPIO_PIN_IC_ISEL); + + if (set) + val &= ~BIT(pin); + else + val |= BIT(pin); + + writel_relaxed(val, ic->base + LPC18XX_GPIO_PIN_IC_ISEL); +} + +static inline void lpc18xx_gpio_pin_ic_set(struct lpc18xx_gpio_pin_ic *ic, + u32 pin, u32 reg) +{ + writel_relaxed(BIT(pin), ic->base + reg); +} + +static void lpc18xx_gpio_pin_ic_mask(struct irq_data *d) +{ + struct lpc18xx_gpio_pin_ic *ic = d->chip_data; + u32 type = irqd_get_trigger_type(d); + + raw_spin_lock(&ic->lock); + + if (type & IRQ_TYPE_LEVEL_MASK || type & IRQ_TYPE_EDGE_RISING) + lpc18xx_gpio_pin_ic_set(ic, d->hwirq, + LPC18XX_GPIO_PIN_IC_CIENR); + + if (type & IRQ_TYPE_EDGE_FALLING) + lpc18xx_gpio_pin_ic_set(ic, d->hwirq, + LPC18XX_GPIO_PIN_IC_CIENF); + + raw_spin_unlock(&ic->lock); + + irq_chip_mask_parent(d); +} + +static void lpc18xx_gpio_pin_ic_unmask(struct irq_data *d) +{ + struct lpc18xx_gpio_pin_ic *ic = d->chip_data; + u32 type = irqd_get_trigger_type(d); + + raw_spin_lock(&ic->lock); + + if (type & IRQ_TYPE_LEVEL_MASK || type & IRQ_TYPE_EDGE_RISING) + lpc18xx_gpio_pin_ic_set(ic, d->hwirq, + LPC18XX_GPIO_PIN_IC_SIENR); + + if (type & IRQ_TYPE_EDGE_FALLING) + lpc18xx_gpio_pin_ic_set(ic, d->hwirq, + LPC18XX_GPIO_PIN_IC_SIENF); + + raw_spin_unlock(&ic->lock); + + irq_chip_unmask_parent(d); +} + +static void lpc18xx_gpio_pin_ic_eoi(struct irq_data *d) +{ + struct lpc18xx_gpio_pin_ic *ic = d->chip_data; + u32 type = irqd_get_trigger_type(d); + + raw_spin_lock(&ic->lock); + + if (type & IRQ_TYPE_EDGE_BOTH) + lpc18xx_gpio_pin_ic_set(ic, d->hwirq, + LPC18XX_GPIO_PIN_IC_IST); + + raw_spin_unlock(&ic->lock); + + irq_chip_eoi_parent(d); +} + +static int lpc18xx_gpio_pin_ic_set_type(struct irq_data *d, unsigned int type) +{ + struct lpc18xx_gpio_pin_ic *ic = d->chip_data; + + raw_spin_lock(&ic->lock); + + if (type & IRQ_TYPE_LEVEL_HIGH) { + lpc18xx_gpio_pin_ic_isel(ic, d->hwirq, true); + lpc18xx_gpio_pin_ic_set(ic, d->hwirq, + LPC18XX_GPIO_PIN_IC_SIENF); + } else if (type & IRQ_TYPE_LEVEL_LOW) { + lpc18xx_gpio_pin_ic_isel(ic, d->hwirq, true); + lpc18xx_gpio_pin_ic_set(ic, d->hwirq, + LPC18XX_GPIO_PIN_IC_CIENF); + } else { + lpc18xx_gpio_pin_ic_isel(ic, d->hwirq, false); + } + + raw_spin_unlock(&ic->lock); + + return 0; +} + +static struct irq_chip lpc18xx_gpio_pin_ic = { + .name = "LPC18xx GPIO pin", + .irq_mask = lpc18xx_gpio_pin_ic_mask, + .irq_unmask = lpc18xx_gpio_pin_ic_unmask, + .irq_eoi = lpc18xx_gpio_pin_ic_eoi, + .irq_set_type = lpc18xx_gpio_pin_ic_set_type, + .flags = IRQCHIP_SET_TYPE_MASKED, +}; + +static int lpc18xx_gpio_pin_ic_domain_alloc(struct irq_domain *domain, + unsigned int virq, + unsigned int nr_irqs, void *data) +{ + struct irq_fwspec parent_fwspec, *fwspec = data; + struct lpc18xx_gpio_pin_ic *ic = domain->host_data; + irq_hw_number_t hwirq; + int ret; + + if (nr_irqs != 1) + return -EINVAL; + + hwirq = fwspec->param[0]; + if (hwirq >= NR_LPC18XX_GPIO_PIN_IC_IRQS) + return -EINVAL; + + /* + * All LPC18xx/LPC43xx GPIO pin hardware interrupts are translated + * into edge interrupts 32...39 on parent Cortex-M3/M4 NVIC + */ + parent_fwspec.fwnode = domain->parent->fwnode; + parent_fwspec.param_count = 1; + parent_fwspec.param[0] = hwirq + 32; + + ret = irq_domain_alloc_irqs_parent(domain, virq, 1, &parent_fwspec); + if (ret < 0) { + pr_err("failed to allocate parent irq %u: %d\n", + parent_fwspec.param[0], ret); + return ret; + } + + return irq_domain_set_hwirq_and_chip(domain, virq, hwirq, + &lpc18xx_gpio_pin_ic, ic); +} + +static const struct irq_domain_ops lpc18xx_gpio_pin_ic_domain_ops = { + .alloc = lpc18xx_gpio_pin_ic_domain_alloc, + .xlate = irq_domain_xlate_twocell, + .free = irq_domain_free_irqs_common, +}; + +static int lpc18xx_gpio_pin_ic_probe(struct lpc18xx_gpio_chip *gc) +{ + struct device *dev = gc->gpio.parent; + struct irq_domain *parent_domain; + struct device_node *parent_node; + struct lpc18xx_gpio_pin_ic *ic; + struct resource res; + int ret, index; + + parent_node = of_irq_find_parent(dev->of_node); + if (!parent_node) + return -ENXIO; + + parent_domain = irq_find_host(parent_node); + of_node_put(parent_node); + if (!parent_domain) + return -ENXIO; + + ic = devm_kzalloc(dev, sizeof(*ic), GFP_KERNEL); + if (!ic) + return -ENOMEM; + + index = of_property_match_string(dev->of_node, "reg-names", + "gpio-pin-ic"); + if (index < 0) { + ret = -ENODEV; + goto free_ic; + } + + ret = of_address_to_resource(dev->of_node, index, &res); + if (ret < 0) + goto free_ic; + + ic->base = devm_ioremap_resource(dev, &res); + if (IS_ERR(ic->base)) { + ret = PTR_ERR(ic->base); + goto free_ic; + } + + raw_spin_lock_init(&ic->lock); + + ic->domain = irq_domain_add_hierarchy(parent_domain, 0, + NR_LPC18XX_GPIO_PIN_IC_IRQS, + dev->of_node, + &lpc18xx_gpio_pin_ic_domain_ops, + ic); + if (!ic->domain) { + pr_err("unable to add irq domain\n"); + ret = -ENODEV; + goto free_iomap; + } + + gc->pin_ic = ic; + + return 0; + +free_iomap: + devm_iounmap(dev, ic->base); +free_ic: + devm_kfree(dev, ic); + + return ret; +} + static void lpc18xx_gpio_set(struct gpio_chip *chip, unsigned offset, int value) { struct lpc18xx_gpio_chip *gc = gpiochip_get_data(chip); @@ -92,45 +326,62 @@ static const struct gpio_chip lpc18xx_chip = { static int lpc18xx_gpio_probe(struct platform_device *pdev) { + struct device *dev = &pdev->dev; struct lpc18xx_gpio_chip *gc; - struct resource *res; - int ret; + int index, ret; - gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL); + gc = devm_kzalloc(dev, sizeof(*gc), GFP_KERNEL); if (!gc) return -ENOMEM; gc->gpio = lpc18xx_chip; platform_set_drvdata(pdev, gc); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - gc->base = devm_ioremap_resource(&pdev->dev, res); + index = of_property_match_string(dev->of_node, "reg-names", "gpio"); + if (index < 0) { + /* To support backward compatibility take the first resource */ + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + gc->base = devm_ioremap_resource(dev, res); + } else { + struct resource res; + + ret = of_address_to_resource(dev->of_node, index, &res); + if (ret < 0) + return ret; + + gc->base = devm_ioremap_resource(dev, &res); + } if (IS_ERR(gc->base)) return PTR_ERR(gc->base); - gc->clk = devm_clk_get(&pdev->dev, NULL); + gc->clk = devm_clk_get(dev, NULL); if (IS_ERR(gc->clk)) { - dev_err(&pdev->dev, "input clock not found\n"); + dev_err(dev, "input clock not found\n"); return PTR_ERR(gc->clk); } ret = clk_prepare_enable(gc->clk); if (ret) { - dev_err(&pdev->dev, "unable to enable clock\n"); + dev_err(dev, "unable to enable clock\n"); return ret; } spin_lock_init(&gc->lock); - gc->gpio.parent = &pdev->dev; + gc->gpio.parent = dev; - ret = gpiochip_add_data(&gc->gpio, gc); + ret = devm_gpiochip_add_data(dev, &gc->gpio, gc); if (ret) { - dev_err(&pdev->dev, "failed to add gpio chip\n"); + dev_err(dev, "failed to add gpio chip\n"); clk_disable_unprepare(gc->clk); return ret; } + /* On error GPIO pin interrupt controller just won't be registered */ + lpc18xx_gpio_pin_ic_probe(gc); + return 0; } @@ -138,7 +389,9 @@ static int lpc18xx_gpio_remove(struct platform_device *pdev) { struct lpc18xx_gpio_chip *gc = platform_get_drvdata(pdev); - gpiochip_remove(&gc->gpio); + if (gc->pin_ic) + irq_domain_remove(gc->pin_ic->domain); + clk_disable_unprepare(gc->clk); return 0; @@ -161,5 +414,6 @@ static struct platform_driver lpc18xx_gpio_driver = { module_platform_driver(lpc18xx_gpio_driver); MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>"); +MODULE_AUTHOR("Vladimir Zapolskiy <vz@mleia.com>"); MODULE_DESCRIPTION("GPIO driver for LPC18xx/43xx"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-lynxpoint.c b/drivers/gpio/gpio-lynxpoint.c @@ -1,36 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0 /* * GPIO controller driver for Intel Lynxpoint PCH chipset> * Copyright (c) 2012, Intel Corporation. * * Author: Mathias Nyman <mathias.nyman@linux.intel.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * */ -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/types.h> +#include <linux/acpi.h> #include <linux/bitops.h> -#include <linux/interrupt.h> #include <linux/gpio/driver.h> -#include <linux/slab.h> -#include <linux/acpi.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> -#include <linux/io.h> +#include <linux/slab.h> +#include <linux/types.h> /* LynxPoint chipset has support for 94 gpio pins */ @@ -240,21 +226,23 @@ static void lp_gpio_irq_handler(struct irq_desc *desc) struct gpio_chip *gc = irq_desc_get_handler_data(desc); struct lp_gpio *lg = gpiochip_get_data(gc); struct irq_chip *chip = irq_data_get_irq_chip(data); - u32 base, pin, mask; unsigned long reg, ena, pending; + u32 base, pin; /* check from GPIO controller which pin triggered the interrupt */ for (base = 0; base < lg->chip.ngpio; base += 32) { reg = lp_gpio_reg(&lg->chip, base, LP_INT_STAT); ena = lp_gpio_reg(&lg->chip, base, LP_INT_ENABLE); - while ((pending = (inl(reg) & inl(ena)))) { + /* Only interrupts that are enabled */ + pending = inl(reg) & inl(ena); + + for_each_set_bit(pin, &pending, 32) { unsigned irq; - pin = __ffs(pending); - mask = BIT(pin); /* Clear before handling so we don't lose an edge */ - outl(mask, reg); + outl(BIT(pin), reg); + irq = irq_find_mapping(lg->chip.irq.domain, base + pin); generic_handle_irq(irq); } @@ -408,8 +396,7 @@ static int lp_gpio_runtime_resume(struct device *dev) static int lp_gpio_resume(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct lp_gpio *lg = platform_get_drvdata(pdev); + struct lp_gpio *lg = dev_get_drvdata(dev); unsigned long reg; int i; @@ -467,5 +454,5 @@ module_exit(lp_gpio_exit); MODULE_AUTHOR("Mathias Nyman (Intel)"); MODULE_DESCRIPTION("GPIO interface for Intel Lynxpoint"); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:lp_gpio"); diff --git a/drivers/gpio/gpio-merrifield.c b/drivers/gpio/gpio-merrifield.c @@ -1,18 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Intel Merrifield SoC GPIO driver * * Copyright (c) 2016 Intel Corporation. * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/acpi.h> #include <linux/bitops.h> #include <linux/gpio/driver.h> -#include <linux/init.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/module.h> diff --git a/drivers/gpio/gpio-mt7621.c b/drivers/gpio/gpio-mt7621.c @@ -244,6 +244,8 @@ mediatek_gpio_bank_probe(struct device *dev, rg->chip.of_xlate = mediatek_gpio_xlate; rg->chip.label = devm_kasprintf(dev, GFP_KERNEL, "%s-bank%d", dev_name(dev), bank); + if (!rg->chip.label) + return -ENOMEM; ret = devm_gpiochip_add_data(dev, &rg->chip, mtk); if (ret < 0) { @@ -295,6 +297,7 @@ mediatek_gpio_probe(struct platform_device *pdev) struct device_node *np = dev->of_node; struct mtk *mtk; int i; + int ret; mtk = devm_kzalloc(dev, sizeof(*mtk), GFP_KERNEL); if (!mtk) @@ -309,8 +312,11 @@ mediatek_gpio_probe(struct platform_device *pdev) platform_set_drvdata(pdev, mtk); mediatek_gpio_irq_chip.name = dev_name(dev); - for (i = 0; i < MTK_BANK_CNT; i++) - mediatek_gpio_bank_probe(dev, np, i); + for (i = 0; i < MTK_BANK_CNT; i++) { + ret = mediatek_gpio_bank_probe(dev, np, i); + if (ret) + return ret; + } return 0; } diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c @@ -608,7 +608,7 @@ static int mvebu_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) ret = -EBUSY; } else { desc = gpiochip_request_own_desc(&mvchip->chip, - pwm->hwpwm, "mvebu-pwm"); + pwm->hwpwm, "mvebu-pwm", 0); if (IS_ERR(desc)) { ret = PTR_ERR(desc); goto out; diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c @@ -17,6 +17,7 @@ #include <linux/irqchip/chained_irq.h> #include <linux/platform_device.h> #include <linux/slab.h> +#include <linux/syscore_ops.h> #include <linux/gpio/driver.h> #include <linux/of.h> #include <linux/of_device.h> @@ -550,33 +551,38 @@ static void mxc_gpio_restore_regs(struct mxc_gpio_port *port) writel(port->gpio_saved_reg.dr, port->base + GPIO_DR); } -static int __maybe_unused mxc_gpio_noirq_suspend(struct device *dev) +static int mxc_gpio_syscore_suspend(void) { - struct platform_device *pdev = to_platform_device(dev); - struct mxc_gpio_port *port = platform_get_drvdata(pdev); + struct mxc_gpio_port *port; - mxc_gpio_save_regs(port); - clk_disable_unprepare(port->clk); + /* walk through all ports */ + list_for_each_entry(port, &mxc_gpio_ports, node) { + mxc_gpio_save_regs(port); + clk_disable_unprepare(port->clk); + } return 0; } -static int __maybe_unused mxc_gpio_noirq_resume(struct device *dev) +static void mxc_gpio_syscore_resume(void) { - struct platform_device *pdev = to_platform_device(dev); - struct mxc_gpio_port *port = platform_get_drvdata(pdev); + struct mxc_gpio_port *port; int ret; - ret = clk_prepare_enable(port->clk); - if (ret) - return ret; - mxc_gpio_restore_regs(port); - - return 0; + /* walk through all ports */ + list_for_each_entry(port, &mxc_gpio_ports, node) { + ret = clk_prepare_enable(port->clk); + if (ret) { + pr_err("mxc: failed to enable gpio clock %d\n", ret); + return; + } + mxc_gpio_restore_regs(port); + } } -static const struct dev_pm_ops mxc_gpio_dev_pm_ops = { - SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mxc_gpio_noirq_suspend, mxc_gpio_noirq_resume) +static struct syscore_ops mxc_gpio_syscore_ops = { + .suspend = mxc_gpio_syscore_suspend, + .resume = mxc_gpio_syscore_resume, }; static struct platform_driver mxc_gpio_driver = { @@ -584,7 +590,6 @@ static struct platform_driver mxc_gpio_driver = { .name = "gpio-mxc", .of_match_table = mxc_gpio_dt_ids, .suppress_bind_attrs = true, - .pm = &mxc_gpio_dev_pm_ops, }, .probe = mxc_gpio_probe, .id_table = mxc_gpio_devtype, @@ -592,6 +597,8 @@ static struct platform_driver mxc_gpio_driver = { static int __init gpio_mxc_init(void) { + register_syscore_ops(&mxc_gpio_syscore_ops); + return platform_driver_register(&mxc_gpio_driver); } subsys_initcall(gpio_mxc_init); diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c @@ -84,7 +84,7 @@ static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type) port->both_edges &= ~pin_mask; switch (type) { case IRQ_TYPE_EDGE_BOTH: - val = port->gc.get(&port->gc, d->hwirq); + val = readl(port->base + PINCTRL_DIN(port)) & pin_mask; if (val) edge = GPIO_INT_FALL_EDGE; else diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c @@ -936,8 +936,7 @@ omap2_gpio_disable_level_quirk(struct gpio_bank *bank) static int omap_mpuio_suspend_noirq(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct gpio_bank *bank = platform_get_drvdata(pdev); + struct gpio_bank *bank = dev_get_drvdata(dev); void __iomem *mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT / bank->stride; unsigned long flags; @@ -951,8 +950,7 @@ static int omap_mpuio_suspend_noirq(struct device *dev) static int omap_mpuio_resume_noirq(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct gpio_bank *bank = platform_get_drvdata(pdev); + struct gpio_bank *bank = dev_get_drvdata(dev); void __iomem *mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT / bank->stride; unsigned long flags; @@ -1635,8 +1633,7 @@ static void omap_gpio_restore_context(struct gpio_bank *bank) static int __maybe_unused omap_gpio_runtime_suspend(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct gpio_bank *bank = platform_get_drvdata(pdev); + struct gpio_bank *bank = dev_get_drvdata(dev); unsigned long flags; int error = 0; @@ -1656,8 +1653,7 @@ unlock: static int __maybe_unused omap_gpio_runtime_resume(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct gpio_bank *bank = platform_get_drvdata(pdev); + struct gpio_bank *bank = dev_get_drvdata(dev); unsigned long flags; int error = 0; diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c @@ -20,6 +20,7 @@ #include <linux/module.h> #include <linux/of_platform.h> #include <linux/platform_data/pca953x.h> +#include <linux/regmap.h> #include <linux/regulator/consumer.h> #include <linux/slab.h> @@ -30,6 +31,8 @@ #define PCA953X_INVERT 0x02 #define PCA953X_DIRECTION 0x03 +#define REG_ADDR_MASK 0x3f +#define REG_ADDR_EXT 0x40 #define REG_ADDR_AI 0x80 #define PCA957X_IN 0x00 @@ -58,7 +61,7 @@ #define PCA_GPIO_MASK 0x00FF #define PCAL_GPIO_MASK 0x1f -#define PCAL_PINCTRL_MASK 0xe0 +#define PCAL_PINCTRL_MASK 0x60 #define PCA_INT 0x0100 #define PCA_PCAL 0x0200 @@ -119,25 +122,27 @@ struct pca953x_reg_config { int direction; int output; int input; + int invert; }; static const struct pca953x_reg_config pca953x_regs = { .direction = PCA953X_DIRECTION, .output = PCA953X_OUTPUT, .input = PCA953X_INPUT, + .invert = PCA953X_INVERT, }; static const struct pca953x_reg_config pca957x_regs = { .direction = PCA957X_CFG, .output = PCA957X_OUT, .input = PCA957X_IN, + .invert = PCA957X_INVRT, }; struct pca953x_chip { unsigned gpio_start; - u8 reg_output[MAX_BANK]; - u8 reg_direction[MAX_BANK]; struct mutex i2c_lock; + struct regmap *regmap; #ifdef CONFIG_GPIO_PCA953X_IRQ struct mutex irq_lock; @@ -154,87 +159,177 @@ struct pca953x_chip { struct regulator *regulator; const struct pca953x_reg_config *regs; - - int (*write_regs)(struct pca953x_chip *, int, u8 *); - int (*read_regs)(struct pca953x_chip *, int, u8 *); }; -static int pca953x_read_single(struct pca953x_chip *chip, int reg, u32 *val, - int off) +static int pca953x_bank_shift(struct pca953x_chip *chip) { - int ret; - int bank_shift = fls((chip->gpio_chip.ngpio - 1) / BANK_SZ); - int offset = off / BANK_SZ; + return fls((chip->gpio_chip.ngpio - 1) / BANK_SZ); +} - ret = i2c_smbus_read_byte_data(chip->client, - (reg << bank_shift) + offset); - *val = ret; +#define PCA953x_BANK_INPUT BIT(0) +#define PCA953x_BANK_OUTPUT BIT(1) +#define PCA953x_BANK_POLARITY BIT(2) +#define PCA953x_BANK_CONFIG BIT(3) - if (ret < 0) { - dev_err(&chip->client->dev, "failed reading register\n"); - return ret; +#define PCA957x_BANK_INPUT BIT(0) +#define PCA957x_BANK_POLARITY BIT(1) +#define PCA957x_BANK_BUSHOLD BIT(2) +#define PCA957x_BANK_CONFIG BIT(4) +#define PCA957x_BANK_OUTPUT BIT(5) + +#define PCAL9xxx_BANK_IN_LATCH BIT(8 + 2) +#define PCAL9xxx_BANK_IRQ_MASK BIT(8 + 5) +#define PCAL9xxx_BANK_IRQ_STAT BIT(8 + 6) + +/* + * We care about the following registers: + * - Standard set, below 0x40, each port can be replicated up to 8 times + * - PCA953x standard + * Input port 0x00 + 0 * bank_size R + * Output port 0x00 + 1 * bank_size RW + * Polarity Inversion port 0x00 + 2 * bank_size RW + * Configuration port 0x00 + 3 * bank_size RW + * - PCA957x with mixed up registers + * Input port 0x00 + 0 * bank_size R + * Polarity Inversion port 0x00 + 1 * bank_size RW + * Bus hold port 0x00 + 2 * bank_size RW + * Configuration port 0x00 + 4 * bank_size RW + * Output port 0x00 + 5 * bank_size RW + * + * - Extended set, above 0x40, often chip specific. + * - PCAL6524/PCAL9555A with custom PCAL IRQ handling: + * Input latch register 0x40 + 2 * bank_size RW + * Interrupt mask register 0x40 + 5 * bank_size RW + * Interrupt status register 0x40 + 6 * bank_size R + * + * - Registers with bit 0x80 set, the AI bit + * The bit is cleared and the registers fall into one of the + * categories above. + */ + +static bool pca953x_check_register(struct pca953x_chip *chip, unsigned int reg, + u32 checkbank) +{ + int bank_shift = pca953x_bank_shift(chip); + int bank = (reg & REG_ADDR_MASK) >> bank_shift; + int offset = reg & (BIT(bank_shift) - 1); + + /* Special PCAL extended register check. */ + if (reg & REG_ADDR_EXT) { + if (!(chip->driver_data & PCA_PCAL)) + return false; + bank += 8; } - return 0; + /* Register is not in the matching bank. */ + if (!(BIT(bank) & checkbank)) + return false; + + /* Register is not within allowed range of bank. */ + if (offset >= NBANK(chip)) + return false; + + return true; } -static int pca953x_write_single(struct pca953x_chip *chip, int reg, u32 val, - int off) +static bool pca953x_readable_register(struct device *dev, unsigned int reg) { - int ret; - int bank_shift = fls((chip->gpio_chip.ngpio - 1) / BANK_SZ); - int offset = off / BANK_SZ; + struct pca953x_chip *chip = dev_get_drvdata(dev); + u32 bank; - ret = i2c_smbus_write_byte_data(chip->client, - (reg << bank_shift) + offset, val); + if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE) { + bank = PCA953x_BANK_INPUT | PCA953x_BANK_OUTPUT | + PCA953x_BANK_POLARITY | PCA953x_BANK_CONFIG; + } else { + bank = PCA957x_BANK_INPUT | PCA957x_BANK_OUTPUT | + PCA957x_BANK_POLARITY | PCA957x_BANK_CONFIG | + PCA957x_BANK_BUSHOLD; + } - if (ret < 0) { - dev_err(&chip->client->dev, "failed writing register\n"); - return ret; + if (chip->driver_data & PCA_PCAL) { + bank |= PCAL9xxx_BANK_IN_LATCH | PCAL9xxx_BANK_IRQ_MASK | + PCAL9xxx_BANK_IRQ_STAT; } - return 0; + return pca953x_check_register(chip, reg, bank); } -static int pca953x_write_regs_8(struct pca953x_chip *chip, int reg, u8 *val) +static bool pca953x_writeable_register(struct device *dev, unsigned int reg) { - return i2c_smbus_write_byte_data(chip->client, reg, *val); -} + struct pca953x_chip *chip = dev_get_drvdata(dev); + u32 bank; -static int pca953x_write_regs_16(struct pca953x_chip *chip, int reg, u8 *val) -{ - u16 word = get_unaligned((u16 *)val); + if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE) { + bank = PCA953x_BANK_OUTPUT | PCA953x_BANK_POLARITY | + PCA953x_BANK_CONFIG; + } else { + bank = PCA957x_BANK_OUTPUT | PCA957x_BANK_POLARITY | + PCA957x_BANK_CONFIG | PCA957x_BANK_BUSHOLD; + } - return i2c_smbus_write_word_data(chip->client, reg << 1, word); + if (chip->driver_data & PCA_PCAL) + bank |= PCAL9xxx_BANK_IN_LATCH | PCAL9xxx_BANK_IRQ_MASK; + + return pca953x_check_register(chip, reg, bank); } -static int pca957x_write_regs_16(struct pca953x_chip *chip, int reg, u8 *val) +static bool pca953x_volatile_register(struct device *dev, unsigned int reg) { - int ret; + struct pca953x_chip *chip = dev_get_drvdata(dev); + u32 bank; - ret = i2c_smbus_write_byte_data(chip->client, reg << 1, val[0]); - if (ret < 0) - return ret; + if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE) + bank = PCA953x_BANK_INPUT; + else + bank = PCA957x_BANK_INPUT; + + if (chip->driver_data & PCA_PCAL) + bank |= PCAL9xxx_BANK_IRQ_STAT; - return i2c_smbus_write_byte_data(chip->client, (reg << 1) + 1, val[1]); + return pca953x_check_register(chip, reg, bank); } -static int pca953x_write_regs_24(struct pca953x_chip *chip, int reg, u8 *val) +const struct regmap_config pca953x_i2c_regmap = { + .reg_bits = 8, + .val_bits = 8, + + .readable_reg = pca953x_readable_register, + .writeable_reg = pca953x_writeable_register, + .volatile_reg = pca953x_volatile_register, + + .cache_type = REGCACHE_RBTREE, + .max_register = 0x7f, +}; + +static u8 pca953x_recalc_addr(struct pca953x_chip *chip, int reg, int off, + bool write, bool addrinc) { - int bank_shift = fls((chip->gpio_chip.ngpio - 1) / BANK_SZ); + int bank_shift = pca953x_bank_shift(chip); int addr = (reg & PCAL_GPIO_MASK) << bank_shift; int pinctrl = (reg & PCAL_PINCTRL_MASK) << 1; + u8 regaddr = pinctrl | addr | (off / BANK_SZ); + + /* Single byte read doesn't need AI bit set. */ + if (!addrinc) + return regaddr; + + /* Chips with 24 and more GPIOs always support Auto Increment */ + if (write && NBANK(chip) > 2) + regaddr |= REG_ADDR_AI; - return i2c_smbus_write_i2c_block_data(chip->client, - pinctrl | addr | REG_ADDR_AI, - NBANK(chip), val); + /* PCA9575 needs address-increment on multi-byte writes */ + if (PCA_CHIP_TYPE(chip->driver_data) == PCA957X_TYPE) + regaddr |= REG_ADDR_AI; + + return regaddr; } static int pca953x_write_regs(struct pca953x_chip *chip, int reg, u8 *val) { - int ret = 0; + u8 regaddr = pca953x_recalc_addr(chip, reg, 0, true, true); + int ret; - ret = chip->write_regs(chip, reg, val); + ret = regmap_bulk_write(chip->regmap, regaddr, val, NBANK(chip)); if (ret < 0) { dev_err(&chip->client->dev, "failed writing register\n"); return ret; @@ -243,42 +338,12 @@ static int pca953x_write_regs(struct pca953x_chip *chip, int reg, u8 *val) return 0; } -static int pca953x_read_regs_8(struct pca953x_chip *chip, int reg, u8 *val) -{ - int ret; - - ret = i2c_smbus_read_byte_data(chip->client, reg); - *val = ret; - - return ret; -} - -static int pca953x_read_regs_16(struct pca953x_chip *chip, int reg, u8 *val) -{ - int ret; - - ret = i2c_smbus_read_word_data(chip->client, reg << 1); - put_unaligned(ret, (u16 *)val); - - return ret; -} - -static int pca953x_read_regs_24(struct pca953x_chip *chip, int reg, u8 *val) -{ - int bank_shift = fls((chip->gpio_chip.ngpio - 1) / BANK_SZ); - int addr = (reg & PCAL_GPIO_MASK) << bank_shift; - int pinctrl = (reg & PCAL_PINCTRL_MASK) << 1; - - return i2c_smbus_read_i2c_block_data(chip->client, - pinctrl | addr | REG_ADDR_AI, - NBANK(chip), val); -} - static int pca953x_read_regs(struct pca953x_chip *chip, int reg, u8 *val) { + u8 regaddr = pca953x_recalc_addr(chip, reg, 0, false, true); int ret; - ret = chip->read_regs(chip, reg, val); + ret = regmap_bulk_read(chip->regmap, regaddr, val, NBANK(chip)); if (ret < 0) { dev_err(&chip->client->dev, "failed reading register\n"); return ret; @@ -290,18 +355,13 @@ static int pca953x_read_regs(struct pca953x_chip *chip, int reg, u8 *val) static int pca953x_gpio_direction_input(struct gpio_chip *gc, unsigned off) { struct pca953x_chip *chip = gpiochip_get_data(gc); - u8 reg_val; + u8 dirreg = pca953x_recalc_addr(chip, chip->regs->direction, off, + true, false); + u8 bit = BIT(off % BANK_SZ); int ret; mutex_lock(&chip->i2c_lock); - reg_val = chip->reg_direction[off / BANK_SZ] | (1u << (off % BANK_SZ)); - - ret = pca953x_write_single(chip, chip->regs->direction, reg_val, off); - if (ret) - goto exit; - - chip->reg_direction[off / BANK_SZ] = reg_val; -exit: + ret = regmap_write_bits(chip->regmap, dirreg, bit, bit); mutex_unlock(&chip->i2c_lock); return ret; } @@ -310,31 +370,21 @@ static int pca953x_gpio_direction_output(struct gpio_chip *gc, unsigned off, int val) { struct pca953x_chip *chip = gpiochip_get_data(gc); - u8 reg_val; + u8 dirreg = pca953x_recalc_addr(chip, chip->regs->direction, off, + true, false); + u8 outreg = pca953x_recalc_addr(chip, chip->regs->output, off, + true, false); + u8 bit = BIT(off % BANK_SZ); int ret; mutex_lock(&chip->i2c_lock); /* set output level */ - if (val) - reg_val = chip->reg_output[off / BANK_SZ] - | (1u << (off % BANK_SZ)); - else - reg_val = chip->reg_output[off / BANK_SZ] - & ~(1u << (off % BANK_SZ)); - - ret = pca953x_write_single(chip, chip->regs->output, reg_val, off); + ret = regmap_write_bits(chip->regmap, outreg, bit, val ? bit : 0); if (ret) goto exit; - chip->reg_output[off / BANK_SZ] = reg_val; - /* then direction */ - reg_val = chip->reg_direction[off / BANK_SZ] & ~(1u << (off % BANK_SZ)); - ret = pca953x_write_single(chip, chip->regs->direction, reg_val, off); - if (ret) - goto exit; - - chip->reg_direction[off / BANK_SZ] = reg_val; + ret = regmap_write_bits(chip->regmap, dirreg, bit, 0); exit: mutex_unlock(&chip->i2c_lock); return ret; @@ -343,11 +393,14 @@ exit: static int pca953x_gpio_get_value(struct gpio_chip *gc, unsigned off) { struct pca953x_chip *chip = gpiochip_get_data(gc); + u8 inreg = pca953x_recalc_addr(chip, chip->regs->input, off, + true, false); + u8 bit = BIT(off % BANK_SZ); u32 reg_val; int ret; mutex_lock(&chip->i2c_lock); - ret = pca953x_read_single(chip, chip->regs->input, &reg_val, off); + ret = regmap_read(chip->regmap, inreg, &reg_val); mutex_unlock(&chip->i2c_lock); if (ret < 0) { /* NOTE: diagnostic already emitted; that's all we should @@ -357,45 +410,37 @@ static int pca953x_gpio_get_value(struct gpio_chip *gc, unsigned off) return 0; } - return (reg_val & (1u << (off % BANK_SZ))) ? 1 : 0; + return !!(reg_val & bit); } static void pca953x_gpio_set_value(struct gpio_chip *gc, unsigned off, int val) { struct pca953x_chip *chip = gpiochip_get_data(gc); - u8 reg_val; - int ret; + u8 outreg = pca953x_recalc_addr(chip, chip->regs->output, off, + true, false); + u8 bit = BIT(off % BANK_SZ); mutex_lock(&chip->i2c_lock); - if (val) - reg_val = chip->reg_output[off / BANK_SZ] - | (1u << (off % BANK_SZ)); - else - reg_val = chip->reg_output[off / BANK_SZ] - & ~(1u << (off % BANK_SZ)); - - ret = pca953x_write_single(chip, chip->regs->output, reg_val, off); - if (ret) - goto exit; - - chip->reg_output[off / BANK_SZ] = reg_val; -exit: + regmap_write_bits(chip->regmap, outreg, bit, val ? bit : 0); mutex_unlock(&chip->i2c_lock); } static int pca953x_gpio_get_direction(struct gpio_chip *gc, unsigned off) { struct pca953x_chip *chip = gpiochip_get_data(gc); + u8 dirreg = pca953x_recalc_addr(chip, chip->regs->direction, off, + true, false); + u8 bit = BIT(off % BANK_SZ); u32 reg_val; int ret; mutex_lock(&chip->i2c_lock); - ret = pca953x_read_single(chip, chip->regs->direction, &reg_val, off); + ret = regmap_read(chip->regmap, dirreg, &reg_val); mutex_unlock(&chip->i2c_lock); if (ret < 0) return ret; - return !!(reg_val & (1u << (off % BANK_SZ))); + return !!(reg_val & bit); } static void pca953x_gpio_set_multiple(struct gpio_chip *gc, @@ -403,14 +448,15 @@ static void pca953x_gpio_set_multiple(struct gpio_chip *gc, { struct pca953x_chip *chip = gpiochip_get_data(gc); unsigned int bank_mask, bank_val; - int bank_shift, bank; + int bank; u8 reg_val[MAX_BANK]; int ret; - bank_shift = fls((chip->gpio_chip.ngpio - 1) / BANK_SZ); - mutex_lock(&chip->i2c_lock); - memcpy(reg_val, chip->reg_output, NBANK(chip)); + ret = pca953x_read_regs(chip, chip->regs->output, reg_val); + if (ret) + goto exit; + for (bank = 0; bank < NBANK(chip); bank++) { bank_mask = mask[bank / sizeof(*mask)] >> ((bank % sizeof(*mask)) * 8); @@ -422,13 +468,7 @@ static void pca953x_gpio_set_multiple(struct gpio_chip *gc, } } - ret = i2c_smbus_write_i2c_block_data(chip->client, - chip->regs->output << bank_shift, - NBANK(chip), reg_val); - if (ret) - goto exit; - - memcpy(chip->reg_output, reg_val, NBANK(chip)); + pca953x_write_regs(chip, chip->regs->output, reg_val); exit: mutex_unlock(&chip->i2c_lock); } @@ -487,6 +527,10 @@ static void pca953x_irq_bus_sync_unlock(struct irq_data *d) u8 new_irqs; int level, i; u8 invert_irq_mask[MAX_BANK]; + int reg_direction[MAX_BANK]; + + regmap_bulk_read(chip->regmap, chip->regs->direction, reg_direction, + NBANK(chip)); if (chip->driver_data & PCA_PCAL) { /* Enable latch on interrupt-enabled inputs */ @@ -502,7 +546,7 @@ static void pca953x_irq_bus_sync_unlock(struct irq_data *d) /* Look for any newly setup interrupt */ for (i = 0; i < NBANK(chip); i++) { new_irqs = chip->irq_trig_fall[i] | chip->irq_trig_raise[i]; - new_irqs &= ~chip->reg_direction[i]; + new_irqs &= reg_direction[i]; while (new_irqs) { level = __ffs(new_irqs); @@ -567,6 +611,7 @@ static bool pca953x_irq_pending(struct pca953x_chip *chip, u8 *pending) bool pending_seen = false; bool trigger_seen = false; u8 trigger[MAX_BANK]; + int reg_direction[MAX_BANK]; int ret, i; if (chip->driver_data & PCA_PCAL) { @@ -597,8 +642,10 @@ static bool pca953x_irq_pending(struct pca953x_chip *chip, u8 *pending) return false; /* Remove output pins from the equation */ + regmap_bulk_read(chip->regmap, chip->regs->direction, reg_direction, + NBANK(chip)); for (i = 0; i < NBANK(chip); i++) - cur_stat[i] &= chip->reg_direction[i]; + cur_stat[i] &= reg_direction[i]; memcpy(old_stat, chip->irq_stat, NBANK(chip)); @@ -652,6 +699,7 @@ static int pca953x_irq_setup(struct pca953x_chip *chip, int irq_base) { struct i2c_client *client = chip->client; + int reg_direction[MAX_BANK]; int ret, i; if (client->irq && irq_base != -1 @@ -666,8 +714,10 @@ static int pca953x_irq_setup(struct pca953x_chip *chip, * interrupt. We have to rely on the previous read for * this purpose. */ + regmap_bulk_read(chip->regmap, chip->regs->direction, + reg_direction, NBANK(chip)); for (i = 0; i < NBANK(chip); i++) - chip->irq_stat[i] &= chip->reg_direction[i]; + chip->irq_stat[i] &= reg_direction[i]; mutex_init(&chip->irq_lock); ret = devm_request_threaded_irq(&client->dev, @@ -715,20 +765,19 @@ static int pca953x_irq_setup(struct pca953x_chip *chip, } #endif -static int device_pca953x_init(struct pca953x_chip *chip, u32 invert) +static int device_pca95xx_init(struct pca953x_chip *chip, u32 invert) { int ret; u8 val[MAX_BANK]; - chip->regs = &pca953x_regs; - - ret = pca953x_read_regs(chip, chip->regs->output, chip->reg_output); - if (ret) + ret = regcache_sync_region(chip->regmap, chip->regs->output, + chip->regs->output + NBANK(chip)); + if (ret != 0) goto out; - ret = pca953x_read_regs(chip, chip->regs->direction, - chip->reg_direction); - if (ret) + ret = regcache_sync_region(chip->regmap, chip->regs->direction, + chip->regs->direction + NBANK(chip)); + if (ret != 0) goto out; /* set platform specific polarity inversion */ @@ -737,7 +786,7 @@ static int device_pca953x_init(struct pca953x_chip *chip, u32 invert) else memset(val, 0, NBANK(chip)); - ret = pca953x_write_regs(chip, PCA953X_INVERT, val); + ret = pca953x_write_regs(chip, chip->regs->invert, val); out: return ret; } @@ -747,22 +796,7 @@ static int device_pca957x_init(struct pca953x_chip *chip, u32 invert) int ret; u8 val[MAX_BANK]; - chip->regs = &pca957x_regs; - - ret = pca953x_read_regs(chip, chip->regs->output, chip->reg_output); - if (ret) - goto out; - ret = pca953x_read_regs(chip, chip->regs->direction, - chip->reg_direction); - if (ret) - goto out; - - /* set platform specific polarity inversion */ - if (invert) - memset(val, 0xFF, NBANK(chip)); - else - memset(val, 0, NBANK(chip)); - ret = pca953x_write_regs(chip, PCA957X_INVRT, val); + ret = device_pca95xx_init(chip, invert); if (ret) goto out; @@ -853,6 +887,16 @@ static int pca953x_probe(struct i2c_client *client, } } + i2c_set_clientdata(client, chip); + + chip->regmap = devm_regmap_init_i2c(client, &pca953x_i2c_regmap); + if (IS_ERR(chip->regmap)) { + ret = PTR_ERR(chip->regmap); + goto err_exit; + } + + regcache_mark_dirty(chip->regmap); + mutex_init(&chip->i2c_lock); /* * In case we have an i2c-mux controlled by a GPIO provided by an @@ -878,24 +922,13 @@ static int pca953x_probe(struct i2c_client *client, */ pca953x_setup_gpio(chip, chip->driver_data & PCA_GPIO_MASK); - if (chip->gpio_chip.ngpio <= 8) { - chip->write_regs = pca953x_write_regs_8; - chip->read_regs = pca953x_read_regs_8; - } else if (chip->gpio_chip.ngpio >= 24) { - chip->write_regs = pca953x_write_regs_24; - chip->read_regs = pca953x_read_regs_24; + if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE) { + chip->regs = &pca953x_regs; + ret = device_pca95xx_init(chip, invert); } else { - if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE) - chip->write_regs = pca953x_write_regs_16; - else - chip->write_regs = pca957x_write_regs_16; - chip->read_regs = pca953x_read_regs_16; - } - - if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE) - ret = device_pca953x_init(chip, invert); - else + chip->regs = &pca957x_regs; ret = device_pca957x_init(chip, invert); + } if (ret) goto err_exit; @@ -914,7 +947,6 @@ static int pca953x_probe(struct i2c_client *client, dev_warn(&client->dev, "setup failed, %d\n", ret); } - i2c_set_clientdata(client, chip); return 0; err_exit: @@ -943,6 +975,91 @@ static int pca953x_remove(struct i2c_client *client) return ret; } +#ifdef CONFIG_PM_SLEEP +static int pca953x_regcache_sync(struct device *dev) +{ + struct pca953x_chip *chip = dev_get_drvdata(dev); + int ret; + + /* + * The ordering between direction and output is important, + * sync these registers first and only then sync the rest. + */ + ret = regcache_sync_region(chip->regmap, chip->regs->direction, + chip->regs->direction + NBANK(chip)); + if (ret != 0) { + dev_err(dev, "Failed to sync GPIO dir registers: %d\n", ret); + return ret; + } + + ret = regcache_sync_region(chip->regmap, chip->regs->output, + chip->regs->output + NBANK(chip)); + if (ret != 0) { + dev_err(dev, "Failed to sync GPIO out registers: %d\n", ret); + return ret; + } + +#ifdef CONFIG_GPIO_PCA953X_IRQ + if (chip->driver_data & PCA_PCAL) { + ret = regcache_sync_region(chip->regmap, PCAL953X_IN_LATCH, + PCAL953X_IN_LATCH + NBANK(chip)); + if (ret != 0) { + dev_err(dev, "Failed to sync INT latch registers: %d\n", + ret); + return ret; + } + + ret = regcache_sync_region(chip->regmap, PCAL953X_INT_MASK, + PCAL953X_INT_MASK + NBANK(chip)); + if (ret != 0) { + dev_err(dev, "Failed to sync INT mask registers: %d\n", + ret); + return ret; + } + } +#endif + + return 0; +} + +static int pca953x_suspend(struct device *dev) +{ + struct pca953x_chip *chip = dev_get_drvdata(dev); + + regcache_cache_only(chip->regmap, true); + + regulator_disable(chip->regulator); + + return 0; +} + +static int pca953x_resume(struct device *dev) +{ + struct pca953x_chip *chip = dev_get_drvdata(dev); + int ret; + + ret = regulator_enable(chip->regulator); + if (ret != 0) { + dev_err(dev, "Failed to enable regulator: %d\n", ret); + return 0; + } + + regcache_cache_only(chip->regmap, false); + regcache_mark_dirty(chip->regmap); + ret = pca953x_regcache_sync(dev); + if (ret) + return ret; + + ret = regcache_sync(chip->regmap); + if (ret != 0) { + dev_err(dev, "Failed to restore register map: %d\n", ret); + return ret; + } + + return 0; +} +#endif + /* convenience to stop overlong match-table lines */ #define OF_953X(__nrgpio, __int) (void *)(__nrgpio | PCA953X_TYPE | __int) #define OF_957X(__nrgpio, __int) (void *)(__nrgpio | PCA957X_TYPE | __int) @@ -986,9 +1103,12 @@ static const struct of_device_id pca953x_dt_ids[] = { MODULE_DEVICE_TABLE(of, pca953x_dt_ids); +static SIMPLE_DEV_PM_OPS(pca953x_pm_ops, pca953x_suspend, pca953x_resume); + static struct i2c_driver pca953x_driver = { .driver = { .name = "pca953x", + .pm = &pca953x_pm_ops, .of_match_table = pca953x_dt_ids, .acpi_match_table = ACPI_PTR(pca953x_acpi_ids), }, diff --git a/drivers/gpio/gpio-pch.c b/drivers/gpio/gpio-pch.c @@ -1,25 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/pci.h> #include <linux/gpio/driver.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> #include <linux/slab.h> #define PCH_EDGE_FALLING 0 @@ -171,11 +159,10 @@ static int pch_gpio_direction_input(struct gpio_chip *gpio, unsigned nr) return 0; } -#ifdef CONFIG_PM /* * Save register configuration and disable interrupts. */ -static void pch_gpio_save_reg_conf(struct pch_gpio *chip) +static void __maybe_unused pch_gpio_save_reg_conf(struct pch_gpio *chip) { chip->pch_gpio_reg.ien_reg = ioread32(&chip->reg->ien); chip->pch_gpio_reg.imask_reg = ioread32(&chip->reg->imask); @@ -185,14 +172,13 @@ static void pch_gpio_save_reg_conf(struct pch_gpio *chip) if (chip->ioh == INTEL_EG20T_PCH) chip->pch_gpio_reg.im1_reg = ioread32(&chip->reg->im1); if (chip->ioh == OKISEMI_ML7223n_IOH) - chip->pch_gpio_reg.gpio_use_sel_reg =\ - ioread32(&chip->reg->gpio_use_sel); + chip->pch_gpio_reg.gpio_use_sel_reg = ioread32(&chip->reg->gpio_use_sel); } /* * This function restores the register configuration of the GPIO device. */ -static void pch_gpio_restore_reg_conf(struct pch_gpio *chip) +static void __maybe_unused pch_gpio_restore_reg_conf(struct pch_gpio *chip) { iowrite32(chip->pch_gpio_reg.ien_reg, &chip->reg->ien); iowrite32(chip->pch_gpio_reg.imask_reg, &chip->reg->imask); @@ -204,10 +190,8 @@ static void pch_gpio_restore_reg_conf(struct pch_gpio *chip) if (chip->ioh == INTEL_EG20T_PCH) iowrite32(chip->pch_gpio_reg.im1_reg, &chip->reg->im1); if (chip->ioh == OKISEMI_ML7223n_IOH) - iowrite32(chip->pch_gpio_reg.gpio_use_sel_reg, - &chip->reg->gpio_use_sel); + iowrite32(chip->pch_gpio_reg.gpio_use_sel_reg, &chip->reg->gpio_use_sel); } -#endif static int pch_gpio_to_irq(struct gpio_chip *gpio, unsigned offset) { @@ -226,7 +210,6 @@ static void pch_gpio_setup(struct pch_gpio *chip) gpio->get = pch_gpio_get; gpio->direction_output = pch_gpio_direction_output; gpio->set = pch_gpio_set; - gpio->dbg_show = NULL; gpio->base = -1; gpio->ngpio = gpio_pins[chip->ioh]; gpio->can_sleep = false; @@ -250,8 +233,7 @@ static int pch_irq_type(struct irq_data *d, unsigned int type) im_reg = &chip->reg->im1; im_pos = ch - 8; } - dev_dbg(chip->dev, "%s:irq=%d type=%d ch=%d pos=%d\n", - __func__, irq, type, ch, im_pos); + dev_dbg(chip->dev, "irq=%d type=%d ch=%d pos=%d\n", irq, type, ch, im_pos); spin_lock_irqsave(&chip->spinlock, flags); @@ -317,16 +299,13 @@ static void pch_irq_ack(struct irq_data *d) static irqreturn_t pch_gpio_handler(int irq, void *dev_id) { struct pch_gpio *chip = dev_id; - u32 reg_val = ioread32(&chip->reg->istatus); + unsigned long reg_val = ioread32(&chip->reg->istatus); int i, ret = IRQ_NONE; - for (i = 0; i < gpio_pins[chip->ioh]; i++) { - if (reg_val & BIT(i)) { - dev_dbg(chip->dev, "%s:[%d]:irq=%d status=0x%x\n", - __func__, i, irq, reg_val); - generic_handle_irq(chip->irq_base + i); - ret = IRQ_HANDLED; - } + for_each_set_bit(i, &reg_val, gpio_pins[chip->ioh]) { + dev_dbg(chip->dev, "[%d]:irq=%d status=0x%lx\n", i, irq, reg_val); + generic_handle_irq(chip->irq_base + i); + ret = IRQ_HANDLED; } return ret; } @@ -367,29 +346,24 @@ static int pch_gpio_probe(struct pci_dev *pdev, int irq_base; u32 msk; - chip = kzalloc(sizeof(*chip), GFP_KERNEL); + chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL); if (chip == NULL) return -ENOMEM; chip->dev = &pdev->dev; - ret = pci_enable_device(pdev); + ret = pcim_enable_device(pdev); if (ret) { - dev_err(&pdev->dev, "%s : pci_enable_device FAILED", __func__); - goto err_pci_enable; + dev_err(&pdev->dev, "pci_enable_device FAILED"); + return ret; } - ret = pci_request_regions(pdev, KBUILD_MODNAME); + ret = pcim_iomap_regions(pdev, 1 << 1, KBUILD_MODNAME); if (ret) { dev_err(&pdev->dev, "pci_request_regions FAILED-%d", ret); - goto err_request_regions; + return ret; } - chip->base = pci_iomap(pdev, 1, 0); - if (!chip->base) { - dev_err(&pdev->dev, "%s : pci_iomap FAILED", __func__); - ret = -ENOMEM; - goto err_iomap; - } + chip->base = pcim_iomap_table(pdev)[1]; if (pdev->device == 0x8803) chip->ioh = INTEL_EG20T_PCH; @@ -402,13 +376,11 @@ static int pch_gpio_probe(struct pci_dev *pdev, pci_set_drvdata(pdev, chip); spin_lock_init(&chip->spinlock); pch_gpio_setup(chip); -#ifdef CONFIG_OF_GPIO - chip->gpio.of_node = pdev->dev.of_node; -#endif - ret = gpiochip_add_data(&chip->gpio, chip); + + ret = devm_gpiochip_add_data(&pdev->dev, &chip->gpio, chip); if (ret) { dev_err(&pdev->dev, "PCH gpio: Failed to register GPIO\n"); - goto err_gpiochip_add; + return ret; } irq_base = devm_irq_alloc_descs(&pdev->dev, -1, 0, @@ -416,7 +388,7 @@ static int pch_gpio_probe(struct pci_dev *pdev, if (irq_base < 0) { dev_warn(&pdev->dev, "PCH gpio: Failed to get IRQ base num\n"); chip->irq_base = -1; - goto end; + return 0; } chip->irq_base = irq_base; @@ -427,53 +399,17 @@ static int pch_gpio_probe(struct pci_dev *pdev, ret = devm_request_irq(&pdev->dev, pdev->irq, pch_gpio_handler, IRQF_SHARED, KBUILD_MODNAME, chip); - if (ret != 0) { - dev_err(&pdev->dev, - "%s request_irq failed\n", __func__); - goto err_request_irq; + if (ret) { + dev_err(&pdev->dev, "request_irq failed\n"); + return ret; } - ret = pch_gpio_alloc_generic_chip(chip, irq_base, - gpio_pins[chip->ioh]); - if (ret) - goto err_request_irq; - -end: - return 0; - -err_request_irq: - gpiochip_remove(&chip->gpio); - -err_gpiochip_add: - pci_iounmap(pdev, chip->base); - -err_iomap: - pci_release_regions(pdev); - -err_request_regions: - pci_disable_device(pdev); - -err_pci_enable: - kfree(chip); - dev_err(&pdev->dev, "%s Failed returns %d\n", __func__, ret); - return ret; -} - -static void pch_gpio_remove(struct pci_dev *pdev) -{ - struct pch_gpio *chip = pci_get_drvdata(pdev); - - gpiochip_remove(&chip->gpio); - pci_iounmap(pdev, chip->base); - pci_release_regions(pdev); - pci_disable_device(pdev); - kfree(chip); + return pch_gpio_alloc_generic_chip(chip, irq_base, gpio_pins[chip->ioh]); } -#ifdef CONFIG_PM -static int pch_gpio_suspend(struct pci_dev *pdev, pm_message_t state) +static int __maybe_unused pch_gpio_suspend(struct device *dev) { - s32 ret; + struct pci_dev *pdev = to_pci_dev(dev); struct pch_gpio *chip = pci_get_drvdata(pdev); unsigned long flags; @@ -481,36 +417,15 @@ static int pch_gpio_suspend(struct pci_dev *pdev, pm_message_t state) pch_gpio_save_reg_conf(chip); spin_unlock_irqrestore(&chip->spinlock, flags); - ret = pci_save_state(pdev); - if (ret) { - dev_err(&pdev->dev, "pci_save_state Failed-%d\n", ret); - return ret; - } - pci_disable_device(pdev); - pci_set_power_state(pdev, PCI_D0); - ret = pci_enable_wake(pdev, PCI_D0, 1); - if (ret) - dev_err(&pdev->dev, "pci_enable_wake Failed -%d\n", ret); - return 0; } -static int pch_gpio_resume(struct pci_dev *pdev) +static int __maybe_unused pch_gpio_resume(struct device *dev) { - s32 ret; + struct pci_dev *pdev = to_pci_dev(dev); struct pch_gpio *chip = pci_get_drvdata(pdev); unsigned long flags; - ret = pci_enable_wake(pdev, PCI_D0, 0); - - pci_set_power_state(pdev, PCI_D0); - ret = pci_enable_device(pdev); - if (ret) { - dev_err(&pdev->dev, "pci_enable_device Failed-%d ", ret); - return ret; - } - pci_restore_state(pdev); - spin_lock_irqsave(&chip->spinlock, flags); iowrite32(0x01, &chip->reg->reset); iowrite32(0x00, &chip->reg->reset); @@ -519,10 +434,8 @@ static int pch_gpio_resume(struct pci_dev *pdev) return 0; } -#else -#define pch_gpio_suspend NULL -#define pch_gpio_resume NULL -#endif + +static SIMPLE_DEV_PM_OPS(pch_gpio_pm_ops, pch_gpio_suspend, pch_gpio_resume); #define PCI_VENDOR_ID_ROHM 0x10DB static const struct pci_device_id pch_gpio_pcidev_id[] = { @@ -538,12 +451,12 @@ static struct pci_driver pch_gpio_driver = { .name = "pch_gpio", .id_table = pch_gpio_pcidev_id, .probe = pch_gpio_probe, - .remove = pch_gpio_remove, - .suspend = pch_gpio_suspend, - .resume = pch_gpio_resume + .driver = { + .pm = &pch_gpio_pm_ops, + }, }; module_pci_driver(pch_gpio_driver); MODULE_DESCRIPTION("PCH GPIO PCI Driver"); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-pci-idio-16.c b/drivers/gpio/gpio-pci-idio-16.c @@ -146,7 +146,7 @@ static int idio_16_gpio_get_multiple(struct gpio_chip *chip, port_state = ioread8(ports[i]); /* store acquired bits at respective bits array offset */ - bits[word_index] |= port_state << word_offset; + bits[word_index] |= (port_state << word_offset) & word_mask; } return 0; diff --git a/drivers/gpio/gpio-pcie-idio-24.c b/drivers/gpio/gpio-pcie-idio-24.c @@ -243,7 +243,7 @@ static int idio_24_gpio_get_multiple(struct gpio_chip *chip, port_state = ioread8(&idio24gpio->reg->ttl_in0_7); /* store acquired bits at respective bits array offset */ - bits[word_index] |= port_state << word_offset; + bits[word_index] |= (port_state << word_offset) & word_mask; } return 0; diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c @@ -54,6 +54,7 @@ struct pl061 { void __iomem *base; struct gpio_chip gc; + struct irq_chip irq_chip; int parent_irq; #ifdef CONFIG_PM @@ -281,15 +282,6 @@ static int pl061_irq_set_wake(struct irq_data *d, unsigned int state) return irq_set_irq_wake(pl061->parent_irq, state); } -static struct irq_chip pl061_irqchip = { - .name = "pl061", - .irq_ack = pl061_irq_ack, - .irq_mask = pl061_irq_mask, - .irq_unmask = pl061_irq_unmask, - .irq_set_type = pl061_irq_type, - .irq_set_wake = pl061_irq_set_wake, -}; - static int pl061_probe(struct amba_device *adev, const struct amba_id *id) { struct device *dev = &adev->dev; @@ -328,6 +320,13 @@ static int pl061_probe(struct amba_device *adev, const struct amba_id *id) /* * irq_chip support */ + pl061->irq_chip.name = dev_name(dev); + pl061->irq_chip.irq_ack = pl061_irq_ack; + pl061->irq_chip.irq_mask = pl061_irq_mask; + pl061->irq_chip.irq_unmask = pl061_irq_unmask; + pl061->irq_chip.irq_set_type = pl061_irq_type; + pl061->irq_chip.irq_set_wake = pl061_irq_set_wake; + writeb(0, pl061->base + GPIOIE); /* disable irqs */ irq = adev->irq[0]; if (irq < 0) { @@ -336,14 +335,14 @@ static int pl061_probe(struct amba_device *adev, const struct amba_id *id) } pl061->parent_irq = irq; - ret = gpiochip_irqchip_add(&pl061->gc, &pl061_irqchip, + ret = gpiochip_irqchip_add(&pl061->gc, &pl061->irq_chip, 0, handle_bad_irq, IRQ_TYPE_NONE); if (ret) { dev_info(&adev->dev, "could not add irqchip\n"); return ret; } - gpiochip_set_chained_irqchip(&pl061->gc, &pl061_irqchip, + gpiochip_set_chained_irqchip(&pl061->gc, &pl061->irq_chip, irq, pl061_irq_handler); amba_set_drvdata(adev, pl061); diff --git a/drivers/gpio/gpio-raspberrypi-exp.c b/drivers/gpio/gpio-raspberrypi-exp.c @@ -206,6 +206,7 @@ static int rpi_exp_gpio_probe(struct platform_device *pdev) } fw = rpi_firmware_get(fw_node); + of_node_put(fw_node); if (!fw) return -EPROBE_DEFER; diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c @@ -1,17 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Renesas R-Car GPIO Support * * Copyright (C) 2014 Renesas Electronics Corporation * Copyright (C) 2013 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/err.h> @@ -43,7 +35,7 @@ struct gpio_rcar_bank_info { struct gpio_rcar_priv { void __iomem *base; spinlock_t lock; - struct platform_device *pdev; + struct device *dev; struct gpio_chip gpio_chip; struct irq_chip irq_chip; unsigned int irq_parent; @@ -148,7 +140,7 @@ static int gpio_rcar_irq_set_type(struct irq_data *d, unsigned int type) struct gpio_rcar_priv *p = gpiochip_get_data(gc); unsigned int hwirq = irqd_to_hwirq(d); - dev_dbg(&p->pdev->dev, "sense irq = %d, type = %d\n", hwirq, type); + dev_dbg(p->dev, "sense irq = %d, type = %d\n", hwirq, type); switch (type & IRQ_TYPE_SENSE_MASK) { case IRQ_TYPE_LEVEL_HIGH: @@ -188,8 +180,7 @@ static int gpio_rcar_irq_set_wake(struct irq_data *d, unsigned int on) if (p->irq_parent) { error = irq_set_irq_wake(p->irq_parent, on); if (error) { - dev_dbg(&p->pdev->dev, - "irq %u doesn't support irq_set_wake\n", + dev_dbg(p->dev, "irq %u doesn't support irq_set_wake\n", p->irq_parent); p->irq_parent = 0; } @@ -252,13 +243,13 @@ static int gpio_rcar_request(struct gpio_chip *chip, unsigned offset) struct gpio_rcar_priv *p = gpiochip_get_data(chip); int error; - error = pm_runtime_get_sync(&p->pdev->dev); + error = pm_runtime_get_sync(p->dev); if (error < 0) return error; error = pinctrl_gpio_request(chip->base + offset); if (error) - pm_runtime_put(&p->pdev->dev); + pm_runtime_put(p->dev); return error; } @@ -275,7 +266,7 @@ static void gpio_rcar_free(struct gpio_chip *chip, unsigned offset) */ gpio_rcar_config_general_input_output_mode(chip, offset, false); - pm_runtime_put(&p->pdev->dev); + pm_runtime_put(p->dev); } static int gpio_rcar_get_direction(struct gpio_chip *chip, unsigned int offset) @@ -406,21 +397,20 @@ MODULE_DEVICE_TABLE(of, gpio_rcar_of_table); static int gpio_rcar_parse_dt(struct gpio_rcar_priv *p, unsigned int *npins) { - struct device_node *np = p->pdev->dev.of_node; + struct device_node *np = p->dev->of_node; const struct gpio_rcar_info *info; struct of_phandle_args args; int ret; - info = of_device_get_match_data(&p->pdev->dev); + info = of_device_get_match_data(p->dev); ret = of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, 0, &args); *npins = ret == 0 ? args.args[2] : RCAR_MAX_GPIO_PER_BANK; p->has_both_edge_trigger = info->has_both_edge_trigger; if (*npins == 0 || *npins > RCAR_MAX_GPIO_PER_BANK) { - dev_warn(&p->pdev->dev, - "Invalid number of gpio lines %u, using %u\n", *npins, - RCAR_MAX_GPIO_PER_BANK); + dev_warn(p->dev, "Invalid number of gpio lines %u, using %u\n", + *npins, RCAR_MAX_GPIO_PER_BANK); *npins = RCAR_MAX_GPIO_PER_BANK; } @@ -442,7 +432,7 @@ static int gpio_rcar_probe(struct platform_device *pdev) if (!p) return -ENOMEM; - p->pdev = pdev; + p->dev = dev; spin_lock_init(&p->lock); /* Get device configuration from DT node */ diff --git a/drivers/gpio/gpio-sama5d2-piobu.c b/drivers/gpio/gpio-sama5d2-piobu.c @@ -0,0 +1,253 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SAMA5D2 PIOBU GPIO controller + * + * Copyright (C) 2018 Microchip Technology Inc. and its subsidiaries + * + * Author: Andrei Stefanescu <andrei.stefanescu@microchip.com> + * + */ +#include <linux/bits.h> +#include <linux/gpio/driver.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#define PIOBU_NUM 8 +#define PIOBU_REG_SIZE 4 + +/* + * backup mode protection register for tamper detection + * normal mode protection register for tamper detection + * wakeup signal generation + */ +#define PIOBU_BMPR 0x7C +#define PIOBU_NMPR 0x80 +#define PIOBU_WKPR 0x90 + +#define PIOBU_BASE 0x18 /* PIOBU offset from SECUMOD base register address. */ + +#define PIOBU_DET_OFFSET 16 + +/* In the datasheet this bit is called OUTPUT */ +#define PIOBU_DIRECTION BIT(8) +#define PIOBU_OUT BIT(8) +#define PIOBU_IN 0 + +#define PIOBU_SOD BIT(9) +#define PIOBU_PDS BIT(10) + +#define PIOBU_HIGH BIT(9) +#define PIOBU_LOW 0 + +struct sama5d2_piobu { + struct gpio_chip chip; + struct regmap *regmap; +}; + +/** + * sama5d2_piobu_setup_pin() - prepares a pin for set_direction call + * + * Do not consider pin for tamper detection (normal and backup modes) + * Do not consider pin as tamper wakeup interrupt source + */ +static int sama5d2_piobu_setup_pin(struct gpio_chip *chip, unsigned int pin) +{ + int ret; + struct sama5d2_piobu *piobu = container_of(chip, struct sama5d2_piobu, + chip); + unsigned int mask = BIT(PIOBU_DET_OFFSET + pin); + + ret = regmap_update_bits(piobu->regmap, PIOBU_BMPR, mask, 0); + if (ret) + return ret; + + ret = regmap_update_bits(piobu->regmap, PIOBU_NMPR, mask, 0); + if (ret) + return ret; + + return regmap_update_bits(piobu->regmap, PIOBU_WKPR, mask, 0); +} + +/** + * sama5d2_piobu_write_value() - writes value & mask at the pin's PIOBU register + */ +static int sama5d2_piobu_write_value(struct gpio_chip *chip, unsigned int pin, + unsigned int mask, unsigned int value) +{ + int reg; + struct sama5d2_piobu *piobu = container_of(chip, struct sama5d2_piobu, + chip); + + reg = PIOBU_BASE + pin * PIOBU_REG_SIZE; + + return regmap_update_bits(piobu->regmap, reg, mask, value); +} + +/** + * sama5d2_piobu_read_value() - read the value with masking from the pin's PIOBU + * register + */ +static int sama5d2_piobu_read_value(struct gpio_chip *chip, unsigned int pin, + unsigned int mask) +{ + struct sama5d2_piobu *piobu = container_of(chip, struct sama5d2_piobu, + chip); + unsigned int val, reg; + int ret; + + reg = PIOBU_BASE + pin * PIOBU_REG_SIZE; + ret = regmap_read(piobu->regmap, reg, &val); + if (ret < 0) + return ret; + + return val & mask; +} + +/** + * sama5d2_piobu_set_direction() - mark pin as input or output + */ +static int sama5d2_piobu_set_direction(struct gpio_chip *chip, + unsigned int direction, + unsigned int pin) +{ + return sama5d2_piobu_write_value(chip, pin, PIOBU_DIRECTION, direction); +} + +/** + * sama5d2_piobu_get_direction() - gpiochip get_direction + */ +static int sama5d2_piobu_get_direction(struct gpio_chip *chip, + unsigned int pin) +{ + int ret = sama5d2_piobu_read_value(chip, pin, PIOBU_DIRECTION); + + if (ret < 0) + return ret; + + return (ret == PIOBU_IN) ? 1 : 0; +} + +/** + * sama5d2_piobu_direction_input() - gpiochip direction_input + */ +static int sama5d2_piobu_direction_input(struct gpio_chip *chip, + unsigned int pin) +{ + return sama5d2_piobu_set_direction(chip, PIOBU_IN, pin); +} + +/** + * sama5d2_piobu_direction_output() - gpiochip direction_output + */ +static int sama5d2_piobu_direction_output(struct gpio_chip *chip, + unsigned int pin, int value) +{ + return sama5d2_piobu_set_direction(chip, PIOBU_OUT, pin); +} + +/** + * sama5d2_piobu_get() - gpiochip get + */ +static int sama5d2_piobu_get(struct gpio_chip *chip, unsigned int pin) +{ + /* if pin is input, read value from PDS else read from SOD */ + int ret = sama5d2_piobu_get_direction(chip, pin); + + if (ret == 1) + ret = sama5d2_piobu_read_value(chip, pin, PIOBU_PDS); + else if (!ret) + ret = sama5d2_piobu_read_value(chip, pin, PIOBU_SOD); + + if (ret < 0) + return ret; + + return !!ret; +} + +/** + * sama5d2_piobu_set() - gpiochip set + */ +static void sama5d2_piobu_set(struct gpio_chip *chip, unsigned int pin, + int value) +{ + if (!value) + value = PIOBU_LOW; + else + value = PIOBU_HIGH; + + sama5d2_piobu_write_value(chip, pin, PIOBU_SOD, value); +} + +static int sama5d2_piobu_probe(struct platform_device *pdev) +{ + struct sama5d2_piobu *piobu; + int ret, i; + + piobu = devm_kzalloc(&pdev->dev, sizeof(*piobu), GFP_KERNEL); + if (!piobu) + return -ENOMEM; + + platform_set_drvdata(pdev, piobu); + piobu->chip.label = pdev->name; + piobu->chip.parent = &pdev->dev; + piobu->chip.of_node = pdev->dev.of_node; + piobu->chip.owner = THIS_MODULE, + piobu->chip.get_direction = sama5d2_piobu_get_direction, + piobu->chip.direction_input = sama5d2_piobu_direction_input, + piobu->chip.direction_output = sama5d2_piobu_direction_output, + piobu->chip.get = sama5d2_piobu_get, + piobu->chip.set = sama5d2_piobu_set, + piobu->chip.base = -1, + piobu->chip.ngpio = PIOBU_NUM, + piobu->chip.can_sleep = 0, + + piobu->regmap = syscon_node_to_regmap(pdev->dev.of_node); + if (IS_ERR(piobu->regmap)) { + dev_err(&pdev->dev, "Failed to get syscon regmap %ld\n", + PTR_ERR(piobu->regmap)); + return PTR_ERR(piobu->regmap); + } + + ret = devm_gpiochip_add_data(&pdev->dev, &piobu->chip, piobu); + if (ret) { + dev_err(&pdev->dev, "Failed to add gpiochip %d\n", ret); + return ret; + } + + for (i = 0; i < PIOBU_NUM; ++i) { + ret = sama5d2_piobu_setup_pin(&piobu->chip, i); + if (ret) { + dev_err(&pdev->dev, "Failed to setup pin: %d %d\n", + i, ret); + return ret; + } + } + + return 0; +} + +static const struct of_device_id sama5d2_piobu_ids[] = { + { .compatible = "atmel,sama5d2-secumod" }, + {}, +}; +MODULE_DEVICE_TABLE(of, sama5d2_piobu_ids); + +static struct platform_driver sama5d2_piobu_driver = { + .driver = { + .name = "sama5d2-piobu", + .of_match_table = of_match_ptr(sama5d2_piobu_ids) + }, + .probe = sama5d2_piobu_probe, +}; + +module_platform_driver(sama5d2_piobu_driver); + +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("SAMA5D2 PIOBU controller driver"); +MODULE_AUTHOR("Andrei Stefanescu <andrei.stefanescu@microchip.com>"); diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c @@ -1,32 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0 /* * GPIO interface for Intel Poulsbo SCH * * Copyright (c) 2010 CompuLab Ltd * Author: Denis Turischev <denis@compulab.co.il> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License 2 as published - * by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/init.h> +#include <linux/acpi.h> +#include <linux/errno.h> +#include <linux/gpio/driver.h> +#include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/io.h> -#include <linux/errno.h> -#include <linux/acpi.h> -#include <linux/platform_device.h> #include <linux/pci_ids.h> -#include <linux/gpio/driver.h> +#include <linux/platform_device.h> #define GEN 0x00 #define GIO 0x04 @@ -235,5 +222,5 @@ module_platform_driver(sch_gpio_driver); MODULE_AUTHOR("Denis Turischev <denis@compulab.co.il>"); MODULE_DESCRIPTION("GPIO interface for Intel Poulsbo SCH"); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:sch_gpio"); diff --git a/drivers/gpio/gpio-sch311x.c b/drivers/gpio/gpio-sch311x.c @@ -188,7 +188,7 @@ static void sch311x_gpio_set(struct gpio_chip *chip, unsigned offset, struct sch311x_gpio_block *block = gpiochip_get_data(chip); spin_lock(&block->lock); - __sch311x_gpio_set(block, offset, value); + __sch311x_gpio_set(block, offset, value); spin_unlock(&block->lock); } diff --git a/drivers/gpio/gpio-sodaville.c b/drivers/gpio/gpio-sodaville.c @@ -1,26 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0 /* * GPIO interface for Intel Sodaville SoCs. * * Copyright (c) 2010, 2011 Intel Corporation * * Author: Hans J. Koch <hjk@linutronix.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License 2 as published - * by the Free Software Foundation. - * */ #include <linux/errno.h> +#include <linux/gpio/driver.h> #include <linux/init.h> +#include <linux/interrupt.h> #include <linux/io.h> #include <linux/irq.h> -#include <linux/interrupt.h> #include <linux/kernel.h> +#include <linux/of_irq.h> #include <linux/pci.h> #include <linux/platform_device.h> -#include <linux/of_irq.h> -#include <linux/gpio/driver.h> #define DRV_NAME "sdv_gpio" #define SDV_NUM_PUB_GPIOS 12 @@ -80,18 +76,15 @@ static int sdv_gpio_pub_set_type(struct irq_data *d, unsigned int type) static irqreturn_t sdv_gpio_pub_irq_handler(int irq, void *data) { struct sdv_gpio_chip_data *sd = data; - u32 irq_stat = readl(sd->gpio_pub_base + GPSTR); + unsigned long irq_stat = readl(sd->gpio_pub_base + GPSTR); + int irq_bit; irq_stat &= readl(sd->gpio_pub_base + GPIO_INT); if (!irq_stat) return IRQ_NONE; - while (irq_stat) { - u32 irq_bit = __fls(irq_stat); - - irq_stat &= ~BIT(irq_bit); + for_each_set_bit(irq_bit, &irq_stat, 32) generic_handle_irq(irq_find_mapping(sd->id, irq_bit)); - } return IRQ_HANDLED; } @@ -155,8 +148,10 @@ static int sdv_register_irqsupport(struct sdv_gpio_chip_data *sd, * we unmask & ACK the IRQ before the source of the interrupt is gone * then the interrupt is active again. */ - sd->gc = irq_alloc_generic_chip("sdv-gpio", 1, sd->irq_base, - sd->gpio_pub_base, handle_fasteoi_irq); + sd->gc = devm_irq_alloc_generic_chip(&pdev->dev, "sdv-gpio", 1, + sd->irq_base, + sd->gpio_pub_base, + handle_fasteoi_irq); if (!sd->gc) return -ENOMEM; @@ -186,70 +181,52 @@ static int sdv_gpio_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id) { struct sdv_gpio_chip_data *sd; - unsigned long addr; - const void *prop; - int len; int ret; u32 mux_val; - sd = kzalloc(sizeof(struct sdv_gpio_chip_data), GFP_KERNEL); + sd = devm_kzalloc(&pdev->dev, sizeof(*sd), GFP_KERNEL); if (!sd) return -ENOMEM; - ret = pci_enable_device(pdev); + + ret = pcim_enable_device(pdev); if (ret) { dev_err(&pdev->dev, "can't enable device.\n"); - goto done; + return ret; } - ret = pci_request_region(pdev, GPIO_BAR, DRV_NAME); + ret = pcim_iomap_regions(pdev, 1 << GPIO_BAR, DRV_NAME); if (ret) { dev_err(&pdev->dev, "can't alloc PCI BAR #%d\n", GPIO_BAR); - goto disable_pci; + return ret; } - addr = pci_resource_start(pdev, GPIO_BAR); - if (!addr) { - ret = -ENODEV; - goto release_reg; - } - sd->gpio_pub_base = ioremap(addr, pci_resource_len(pdev, GPIO_BAR)); + sd->gpio_pub_base = pcim_iomap_table(pdev)[GPIO_BAR]; - prop = of_get_property(pdev->dev.of_node, "intel,muxctl", &len); - if (prop && len == 4) { - mux_val = of_read_number(prop, 1); + ret = of_property_read_u32(pdev->dev.of_node, "intel,muxctl", &mux_val); + if (!ret) writel(mux_val, sd->gpio_pub_base + GPMUXCTL); - } ret = bgpio_init(&sd->chip, &pdev->dev, 4, sd->gpio_pub_base + GPINR, sd->gpio_pub_base + GPOUTR, NULL, sd->gpio_pub_base + GPOER, NULL, 0); if (ret) - goto unmap; + return ret; + sd->chip.ngpio = SDV_NUM_PUB_GPIOS; - ret = gpiochip_add_data(&sd->chip, sd); + ret = devm_gpiochip_add_data(&pdev->dev, &sd->chip, sd); if (ret < 0) { dev_err(&pdev->dev, "gpiochip_add() failed.\n"); - goto unmap; + return ret; } ret = sdv_register_irqsupport(sd, pdev); if (ret) - goto unmap; + return ret; pci_set_drvdata(pdev, sd); dev_info(&pdev->dev, "Sodaville GPIO driver registered.\n"); return 0; - -unmap: - iounmap(sd->gpio_pub_base); -release_reg: - pci_release_region(pdev, GPIO_BAR); -disable_pci: - pci_disable_device(pdev); -done: - kfree(sd); - return ret; } static const struct pci_device_id sdv_gpio_pci_ids[] = { diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c @@ -404,8 +404,7 @@ static void tegra_gpio_irq_handler(struct irq_desc *desc) #ifdef CONFIG_PM_SLEEP static int tegra_gpio_resume(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct tegra_gpio_info *tgi = platform_get_drvdata(pdev); + struct tegra_gpio_info *tgi = dev_get_drvdata(dev); unsigned long flags; unsigned int b, p; @@ -444,8 +443,7 @@ static int tegra_gpio_resume(struct device *dev) static int tegra_gpio_suspend(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct tegra_gpio_info *tgi = platform_get_drvdata(pdev); + struct tegra_gpio_info *tgi = dev_get_drvdata(dev); unsigned long flags; unsigned int b, p; diff --git a/drivers/gpio/gpio-tegra186.c b/drivers/gpio/gpio-tegra186.c @@ -279,7 +279,7 @@ static void tegra186_irq_unmask(struct irq_data *data) writel(value, base + TEGRA186_GPIO_ENABLE_CONFIG); } -static int tegra186_irq_set_type(struct irq_data *data, unsigned int flow) +static int tegra186_irq_set_type(struct irq_data *data, unsigned int type) { struct tegra_gpio *gpio = irq_data_get_irq_chip_data(data); void __iomem *base; @@ -293,7 +293,7 @@ static int tegra186_irq_set_type(struct irq_data *data, unsigned int flow) value &= ~TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_MASK; value &= ~TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_LEVEL; - switch (flow & IRQ_TYPE_SENSE_MASK) { + switch (type & IRQ_TYPE_SENSE_MASK) { case IRQ_TYPE_NONE: break; @@ -325,7 +325,7 @@ static int tegra186_irq_set_type(struct irq_data *data, unsigned int flow) writel(value, base + TEGRA186_GPIO_ENABLE_CONFIG); - if ((flow & IRQ_TYPE_EDGE_BOTH) == 0) + if ((type & IRQ_TYPE_EDGE_BOTH) == 0) irq_set_handler_locked(data, handle_level_irq); else irq_set_handler_locked(data, handle_edge_irq); diff --git a/drivers/gpio/gpio-uniphier.c b/drivers/gpio/gpio-uniphier.c @@ -1,16 +1,7 @@ -/* - * Copyright (C) 2017 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2017 Socionext Inc. +// Author: Masahiro Yamada <yamada.masahiro@socionext.com> #include <linux/bits.h> #include <linux/gpio/driver.h> diff --git a/drivers/gpio/gpio-vf610.c b/drivers/gpio/gpio-vf610.c @@ -7,6 +7,7 @@ * Author: Stefan Agner <stefan@agner.ch>. */ #include <linux/bitops.h> +#include <linux/clk.h> #include <linux/err.h> #include <linux/gpio/driver.h> #include <linux/init.h> @@ -32,6 +33,8 @@ struct vf610_gpio_port { void __iomem *gpio_base; const struct fsl_gpio_soc_data *sdata; u8 irqc[VF610_GPIO_PER_PORT]; + struct clk *clk_port; + struct clk *clk_gpio; int irq; }; @@ -271,6 +274,33 @@ static int vf610_gpio_probe(struct platform_device *pdev) if (port->irq < 0) return port->irq; + port->clk_port = devm_clk_get(&pdev->dev, "port"); + if (!IS_ERR(port->clk_port)) { + ret = clk_prepare_enable(port->clk_port); + if (ret) + return ret; + } else if (port->clk_port == ERR_PTR(-EPROBE_DEFER)) { + /* + * Percolate deferrals, for anything else, + * just live without the clocking. + */ + return PTR_ERR(port->clk_port); + } + + port->clk_gpio = devm_clk_get(&pdev->dev, "gpio"); + if (!IS_ERR(port->clk_gpio)) { + ret = clk_prepare_enable(port->clk_gpio); + if (ret) { + clk_disable_unprepare(port->clk_port); + return ret; + } + } else if (port->clk_gpio == ERR_PTR(-EPROBE_DEFER)) { + clk_disable_unprepare(port->clk_port); + return PTR_ERR(port->clk_gpio); + } + + platform_set_drvdata(pdev, port); + gc = &port->gc; gc->of_node = np; gc->parent = dev; @@ -305,12 +335,26 @@ static int vf610_gpio_probe(struct platform_device *pdev) return 0; } +static int vf610_gpio_remove(struct platform_device *pdev) +{ + struct vf610_gpio_port *port = platform_get_drvdata(pdev); + + gpiochip_remove(&port->gc); + if (!IS_ERR(port->clk_port)) + clk_disable_unprepare(port->clk_port); + if (!IS_ERR(port->clk_gpio)) + clk_disable_unprepare(port->clk_gpio); + + return 0; +} + static struct platform_driver vf610_gpio_driver = { .driver = { .name = "gpio-vf610", .of_match_table = vf610_gpio_dt_ids, }, .probe = vf610_gpio_probe, + .remove = vf610_gpio_remove, }; builtin_platform_driver(vf610_gpio_driver); diff --git a/drivers/gpio/gpio-ws16c48.c b/drivers/gpio/gpio-ws16c48.c @@ -169,7 +169,7 @@ static int ws16c48_gpio_get_multiple(struct gpio_chip *chip, port_state = inb(ws16c48gpio->base + i); /* store acquired bits at respective bits array offset */ - bits[word_index] |= port_state << word_offset; + bits[word_index] |= (port_state << word_offset) & word_mask; } return 0; diff --git a/drivers/gpio/gpio-zynq.c b/drivers/gpio/gpio-zynq.c @@ -358,6 +358,28 @@ static int zynq_gpio_dir_out(struct gpio_chip *chip, unsigned int pin, } /** + * zynq_gpio_get_direction - Read the direction of the specified GPIO pin + * @chip: gpio_chip instance to be worked on + * @pin: gpio pin number within the device + * + * This function returns the direction of the specified GPIO. + * + * Return: 0 for output, 1 for input + */ +static int zynq_gpio_get_direction(struct gpio_chip *chip, unsigned int pin) +{ + u32 reg; + unsigned int bank_num, bank_pin_num; + struct zynq_gpio *gpio = gpiochip_get_data(chip); + + zynq_gpio_get_bank_pin(pin, &bank_num, &bank_pin_num, gpio); + + reg = readl_relaxed(gpio->base_addr + ZYNQ_GPIO_DIRM_OFFSET(bank_num)); + + return !(reg & BIT(bank_pin_num)); +} + +/** * zynq_gpio_irq_mask - Disable the interrupts for a gpio pin * @irq_data: per irq and chip data passed down to chip functions * @@ -693,8 +715,7 @@ static int __maybe_unused zynq_gpio_resume(struct device *dev) static int __maybe_unused zynq_gpio_runtime_suspend(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct zynq_gpio *gpio = platform_get_drvdata(pdev); + struct zynq_gpio *gpio = dev_get_drvdata(dev); clk_disable_unprepare(gpio->clk); @@ -703,8 +724,7 @@ static int __maybe_unused zynq_gpio_runtime_suspend(struct device *dev) static int __maybe_unused zynq_gpio_runtime_resume(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct zynq_gpio *gpio = platform_get_drvdata(pdev); + struct zynq_gpio *gpio = dev_get_drvdata(dev); return clk_prepare_enable(gpio->clk); } @@ -827,6 +847,7 @@ static int zynq_gpio_probe(struct platform_device *pdev) chip->free = zynq_gpio_free; chip->direction_input = zynq_gpio_dir_in; chip->direction_output = zynq_gpio_dir_out; + chip->get_direction = zynq_gpio_get_direction; chip->base = of_alias_get_id(pdev->dev.of_node, "gpio"); chip->ngpio = gpio->p_data->ngpio; diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c @@ -217,7 +217,7 @@ static acpi_status acpi_gpiochip_alloc_event(struct acpi_resource *ares, if (!handler) return AE_OK; - desc = gpiochip_request_own_desc(chip, pin, "ACPI:Event"); + desc = gpiochip_request_own_desc(chip, pin, "ACPI:Event", 0); if (IS_ERR(desc)) { dev_err(chip->parent, "Failed to request GPIO\n"); return AE_ERROR; @@ -913,23 +913,15 @@ acpi_gpio_adr_space_handler(u32 function, acpi_physical_address address, if (!found) { enum gpiod_flags flags = acpi_gpio_to_gpiod_flags(agpio); const char *label = "ACPI:OpRegion"; - int err; - desc = gpiochip_request_own_desc(chip, pin, label); + desc = gpiochip_request_own_desc(chip, pin, label, + flags); if (IS_ERR(desc)) { status = AE_ERROR; mutex_unlock(&achip->conn_lock); goto out; } - err = gpiod_configure_flags(desc, label, 0, flags); - if (err < 0) { - status = AE_NOT_CONFIGURED; - gpiochip_free_own_desc(desc); - mutex_unlock(&achip->conn_lock); - goto out; - } - conn = kzalloc(sizeof(*conn), GFP_KERNEL); if (!conn) { status = AE_NO_MEMORY; diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0+ /* * OF helpers for the GPIO API * @@ -54,10 +54,32 @@ static struct gpio_desc *of_xlate_and_get_gpiod_flags(struct gpio_chip *chip, } static void of_gpio_flags_quirks(struct device_node *np, + const char *propname, enum of_gpio_flags *flags, int index) { /* + * Handle MMC "cd-inverted" and "wp-inverted" semantics. + */ + if (IS_ENABLED(CONFIG_MMC)) { + /* + * Active low is the default according to the + * SDHCI specification and the device tree + * bindings. However the code in the current + * kernel was written such that the phandle + * flags were always respected, and "cd-inverted" + * would invert the flag from the device phandle. + */ + if (!strcmp(propname, "cd-gpios")) { + if (of_property_read_bool(np, "cd-inverted")) + *flags ^= OF_GPIO_ACTIVE_LOW; + } + if (!strcmp(propname, "wp-gpios")) { + if (of_property_read_bool(np, "wp-inverted")) + *flags ^= OF_GPIO_ACTIVE_LOW; + } + } + /* * Some GPIO fixed regulator quirks. * Note that active low is the default. */ @@ -174,7 +196,7 @@ struct gpio_desc *of_get_named_gpiod_flags(struct device_node *np, goto out; if (flags) - of_gpio_flags_quirks(np, flags, index); + of_gpio_flags_quirks(np, propname, flags, index); pr_debug("%s: parsed '%s' property of node '%pOF[%d]' - status (%d)\n", __func__, propname, np, index, diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c @@ -1512,19 +1512,6 @@ static void devm_gpio_chip_release(struct device *dev, void *res) gpiochip_remove(chip); } -static int devm_gpio_chip_match(struct device *dev, void *res, void *data) - -{ - struct gpio_chip **r = res; - - if (!r || !*r) { - WARN_ON(!r || !*r); - return 0; - } - - return *r == data; -} - /** * devm_gpiochip_add_data() - Resource manager gpiochip_add_data() * @dev: pointer to the device that gpio_chip belongs to. @@ -1565,23 +1552,6 @@ int devm_gpiochip_add_data(struct device *dev, struct gpio_chip *chip, EXPORT_SYMBOL_GPL(devm_gpiochip_add_data); /** - * devm_gpiochip_remove() - Resource manager of gpiochip_remove() - * @dev: device for which which resource was allocated - * @chip: the chip to remove - * - * A gpio_chip with any GPIOs still requested may not be removed. - */ -void devm_gpiochip_remove(struct device *dev, struct gpio_chip *chip) -{ - int ret; - - ret = devres_release(dev, devm_gpio_chip_release, - devm_gpio_chip_match, chip); - WARN_ON(ret); -} -EXPORT_SYMBOL_GPL(devm_gpiochip_remove); - -/** * gpiochip_find() - iterator for locating a specific gpio_chip * @data: data to pass to match function * @match: Callback function to check gpio_chip @@ -2299,6 +2269,12 @@ static int gpiod_request_commit(struct gpio_desc *desc, const char *label) unsigned long flags; unsigned offset; + if (label) { + label = kstrdup_const(label, GFP_KERNEL); + if (!label) + return -ENOMEM; + } + spin_lock_irqsave(&gpio_lock, flags); /* NOTE: gpio_request() can be called in early boot, @@ -2309,6 +2285,7 @@ static int gpiod_request_commit(struct gpio_desc *desc, const char *label) desc_set_label(desc, label ? : "?"); status = 0; } else { + kfree_const(label); status = -EBUSY; goto done; } @@ -2325,6 +2302,7 @@ static int gpiod_request_commit(struct gpio_desc *desc, const char *label) if (status < 0) { desc_set_label(desc, NULL); + kfree_const(label); clear_bit(FLAG_REQUESTED, &desc->flags); goto done; } @@ -2420,6 +2398,7 @@ static bool gpiod_free_commit(struct gpio_desc *desc) chip->free(chip, gpio_chip_hwgpio(desc)); spin_lock_irqsave(&gpio_lock, flags); } + kfree_const(desc->label); desc_set_label(desc, NULL); clear_bit(FLAG_ACTIVE_LOW, &desc->flags); clear_bit(FLAG_REQUESTED, &desc->flags); @@ -2476,6 +2455,7 @@ EXPORT_SYMBOL_GPL(gpiochip_is_requested); * @chip: GPIO chip * @hwnum: hardware number of the GPIO for which to request the descriptor * @label: label for the GPIO + * @flags: flags for this GPIO or 0 if default * * Function allows GPIO chip drivers to request and use their own GPIO * descriptors via gpiolib API. Difference to gpiod_request() is that this @@ -2488,7 +2468,8 @@ EXPORT_SYMBOL_GPL(gpiochip_is_requested); * code on failure. */ struct gpio_desc *gpiochip_request_own_desc(struct gpio_chip *chip, u16 hwnum, - const char *label) + const char *label, + enum gpiod_flags flags) { struct gpio_desc *desc = gpiochip_get_desc(chip, hwnum); int err; @@ -2502,6 +2483,13 @@ struct gpio_desc *gpiochip_request_own_desc(struct gpio_chip *chip, u16 hwnum, if (err < 0) return ERR_PTR(err); + err = gpiod_configure_flags(desc, label, 0, flags); + if (err) { + chip_err(chip, "setup of own GPIO %s failed\n", label); + gpiod_free_commit(desc); + return ERR_PTR(err); + } + return desc; } EXPORT_SYMBOL_GPL(gpiochip_request_own_desc); @@ -3375,11 +3363,19 @@ EXPORT_SYMBOL_GPL(gpiod_cansleep); * @desc: gpio to set the consumer name on * @name: the new consumer name */ -void gpiod_set_consumer_name(struct gpio_desc *desc, const char *name) +int gpiod_set_consumer_name(struct gpio_desc *desc, const char *name) { - VALIDATE_DESC_VOID(desc); - /* Just overwrite whatever the previous name was */ - desc->label = name; + VALIDATE_DESC(desc); + if (name) { + name = kstrdup_const(name, GFP_KERNEL); + if (!name) + return -ENOMEM; + } + + kfree_const(desc->label); + desc_set_label(desc, name); + + return 0; } EXPORT_SYMBOL_GPL(gpiod_set_consumer_name); @@ -4348,7 +4344,15 @@ int gpiod_hog(struct gpio_desc *desc, const char *name, chip = gpiod_to_chip(desc); hwnum = gpio_chip_hwgpio(desc); - local_desc = gpiochip_request_own_desc(chip, hwnum, name); + /* + * FIXME: not very elegant that we call gpiod_configure_flags() + * twice here (once inside gpiochip_request_own_desc() and + * again here), but the gpiochip_request_own_desc() is external + * and cannot really pass the lflags so this is the lesser evil + * at the moment. Pass zero as dflags on this first call so we + * don't screw anything up. + */ + local_desc = gpiochip_request_own_desc(chip, hwnum, name, 0); if (IS_ERR(local_desc)) { status = PTR_ERR(local_desc); pr_err("requesting hog GPIO %s (chip %s, offset %d) failed, %d\n", diff --git a/drivers/hid/hid-cp2112.c b/drivers/hid/hid-cp2112.c @@ -1203,7 +1203,7 @@ static int __maybe_unused cp2112_allocate_irq(struct cp2112_device *dev, return -EINVAL; dev->desc[pin] = gpiochip_request_own_desc(&dev->gc, pin, - "HID/I2C:Event"); + "HID/I2C:Event", 0); if (IS_ERR(dev->desc[pin])) { dev_err(dev->gc.parent, "Failed to request GPIO\n"); return PTR_ERR(dev->desc[pin]); diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c @@ -21,6 +21,7 @@ #include <linux/spinlock.h> #include <linux/io.h> #include <linux/gpio/driver.h> +#include <linux/gpio/consumer.h> /* GPIO descriptor enum */ #include <linux/interrupt.h> #include <linux/irqdomain.h> #include <linux/platform_device.h> @@ -2170,7 +2171,8 @@ static int gpmc_probe_generic_child(struct platform_device *pdev, unsigned int wait_pin = gpmc_s.wait_pin; waitpin_desc = gpiochip_request_own_desc(&gpmc->gpio_chip, - wait_pin, "WAITPIN"); + wait_pin, "WAITPIN", + 0); if (IS_ERR(waitpin_desc)) { dev_err(&pdev->dev, "invalid wait-pin: %d\n", wait_pin); ret = PTR_ERR(waitpin_desc); diff --git a/include/dt-bindings/gpio/tegra186-gpio.h b/include/dt-bindings/gpio/tegra186-gpio.h @@ -14,6 +14,34 @@ #include <dt-bindings/gpio/gpio.h> /* GPIOs implemented by main GPIO controller */ +#define TEGRA186_MAIN_GPIO_PORT_A 0 +#define TEGRA186_MAIN_GPIO_PORT_B 1 +#define TEGRA186_MAIN_GPIO_PORT_C 2 +#define TEGRA186_MAIN_GPIO_PORT_D 3 +#define TEGRA186_MAIN_GPIO_PORT_E 4 +#define TEGRA186_MAIN_GPIO_PORT_F 5 +#define TEGRA186_MAIN_GPIO_PORT_G 6 +#define TEGRA186_MAIN_GPIO_PORT_H 7 +#define TEGRA186_MAIN_GPIO_PORT_I 8 +#define TEGRA186_MAIN_GPIO_PORT_J 9 +#define TEGRA186_MAIN_GPIO_PORT_K 10 +#define TEGRA186_MAIN_GPIO_PORT_L 11 +#define TEGRA186_MAIN_GPIO_PORT_M 12 +#define TEGRA186_MAIN_GPIO_PORT_N 13 +#define TEGRA186_MAIN_GPIO_PORT_O 14 +#define TEGRA186_MAIN_GPIO_PORT_P 15 +#define TEGRA186_MAIN_GPIO_PORT_Q 16 +#define TEGRA186_MAIN_GPIO_PORT_R 17 +#define TEGRA186_MAIN_GPIO_PORT_T 18 +#define TEGRA186_MAIN_GPIO_PORT_X 19 +#define TEGRA186_MAIN_GPIO_PORT_Y 20 +#define TEGRA186_MAIN_GPIO_PORT_BB 21 +#define TEGRA186_MAIN_GPIO_PORT_CC 22 + +#define TEGRA186_MAIN_GPIO(port, offset) \ + ((TEGRA186_MAIN_GPIO_PORT_##port * 8) + offset) + +/* need to keep these for backwards-compatibility */ #define TEGRA_MAIN_GPIO_PORT_A 0 #define TEGRA_MAIN_GPIO_PORT_B 1 #define TEGRA_MAIN_GPIO_PORT_C 2 @@ -42,6 +70,19 @@ ((TEGRA_MAIN_GPIO_PORT_##port * 8) + offset) /* GPIOs implemented by AON GPIO controller */ +#define TEGRA186_AON_GPIO_PORT_S 0 +#define TEGRA186_AON_GPIO_PORT_U 1 +#define TEGRA186_AON_GPIO_PORT_V 2 +#define TEGRA186_AON_GPIO_PORT_W 3 +#define TEGRA186_AON_GPIO_PORT_Z 4 +#define TEGRA186_AON_GPIO_PORT_AA 5 +#define TEGRA186_AON_GPIO_PORT_EE 6 +#define TEGRA186_AON_GPIO_PORT_FF 7 + +#define TEGRA186_AON_GPIO(port, offset) \ + ((TEGRA186_AON_GPIO_PORT_##port * 8) + offset) + +/* need to keep these for backwards-compatibility */ #define TEGRA_AON_GPIO_PORT_S 0 #define TEGRA_AON_GPIO_PORT_U 1 #define TEGRA_AON_GPIO_PORT_V 2 diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h @@ -163,7 +163,7 @@ int gpiod_is_active_low(const struct gpio_desc *desc); int gpiod_cansleep(const struct gpio_desc *desc); int gpiod_to_irq(const struct gpio_desc *desc); -void gpiod_set_consumer_name(struct gpio_desc *desc, const char *name); +int gpiod_set_consumer_name(struct gpio_desc *desc, const char *name); /* Convert between the old gpio_ and new gpiod_ interfaces */ struct gpio_desc *gpio_to_desc(unsigned gpio); @@ -509,15 +509,17 @@ static inline int gpiod_to_irq(const struct gpio_desc *desc) return -EINVAL; } -static inline void gpiod_set_consumer_name(struct gpio_desc *desc, const char *name) +static inline int gpiod_set_consumer_name(struct gpio_desc *desc, + const char *name) { /* GPIO can never have been requested */ WARN_ON(1); + return -EINVAL; } static inline struct gpio_desc *gpio_to_desc(unsigned gpio) { - return ERR_PTR(-EINVAL); + return NULL; } static inline int desc_to_gpio(const struct gpio_desc *desc) diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h @@ -17,6 +17,7 @@ struct device_node; struct seq_file; struct gpio_device; struct module; +enum gpiod_flags; #ifdef CONFIG_GPIOLIB @@ -166,11 +167,6 @@ struct gpio_irq_chip { */ void (*irq_disable)(struct irq_data *data); }; - -static inline struct gpio_irq_chip *to_gpio_irq_chip(struct irq_chip *chip) -{ - return container_of(chip, struct gpio_irq_chip, chip); -} #endif /** @@ -422,7 +418,6 @@ static inline int gpiochip_add(struct gpio_chip *chip) extern void gpiochip_remove(struct gpio_chip *chip); extern int devm_gpiochip_add_data(struct device *dev, struct gpio_chip *chip, void *data); -extern void devm_gpiochip_remove(struct device *dev, struct gpio_chip *chip); extern struct gpio_chip *gpiochip_find(void *data, int (*match)(struct gpio_chip *chip, void *data)); @@ -610,7 +605,8 @@ gpiochip_remove_pin_ranges(struct gpio_chip *chip) #endif /* CONFIG_PINCTRL */ struct gpio_desc *gpiochip_request_own_desc(struct gpio_chip *chip, u16 hwnum, - const char *label); + const char *label, + enum gpiod_flags flags); void gpiochip_free_own_desc(struct gpio_desc *desc); #else /* CONFIG_GPIOLIB */