whiterose

linux unikernel
Log | Files | Refs | README | LICENSE | git clone https://git.ne02ptzero.me/git/whiterose

commit 40ebba2ad7e1a3f024479e633da5ca5694524767
parent da59f180d529fc78591e71acf2c67114b8eff10d
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date:   Fri, 30 Nov 2018 12:20:48 -0800

Merge tag 'usb-4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY driver fixes from Greg KH:
 "Here are some small USB and PHY driver fixes for 4.20-rc5

  Nothing big at all, just the usual handful of USB fixes for reported
  issues, along with some gadget and PHY driver bug fixes.

  All of these have been in linux-next with no reported issues. Note,
  the USB gadget fixes were in linux-next on its own branch, not in
  mine, it just got merged into here yesterday and missed linux-next of
  today"

* tag 'usb-4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: u_ether: fix unsafe list iteration
  USB: omap_udc: fix rejection of out transfers when DMA is used
  USB: omap_udc: fix USB gadget functionality on Palm Tungsten E
  USB: omap_udc: fix omap_udc_start() on 15xx machines
  USB: omap_udc: fix crashes on probe error and module removal
  USB: omap_udc: use devm_request_irq()
  usb: core: quirks: add RESET_RESUME quirk for Cherry G230 Stream series
  USB: usb-storage: Add new IDs to ums-realtek
  Revert "usb: dwc3: gadget: skip Set/Clear Halt when invalid"
  phy: qcom-qusb2: Fix HSTX_TRIM tuning with fused value for SDM845
  phy: qcom-qusb2: Use HSTX_TRIM fused value as is
  dt-bindings: phy-qcom-qmp: Fix several mistakes from prior commits
  phy: uniphier-pcie: Depend on HAS_IOMEM

Diffstat:
MDocumentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 31+++++++++++++++++++++++--------
Mdrivers/phy/qualcomm/phy-qcom-qusb2.c | 20+++++++++++---------
Mdrivers/phy/socionext/Kconfig | 3++-
Mdrivers/usb/core/quirks.c | 3+++
Mdrivers/usb/dwc3/gadget.c | 5-----
Mdrivers/usb/gadget/function/u_ether.c | 11++++++-----
Mdrivers/usb/gadget/udc/omap_udc.c | 88++++++++++++++++++++++++++++---------------------------------------------------
Mdrivers/usb/storage/unusual_realtek.h | 10++++++++++
8 files changed, 86 insertions(+), 85 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt @@ -40,24 +40,36 @@ Required properties: "ref" for 19.2 MHz ref clk, "com_aux" for phy common block aux clock, "ref_aux" for phy reference aux clock, + + For "qcom,ipq8074-qmp-pcie-phy": no clocks are listed. For "qcom,msm8996-qmp-pcie-phy" must contain: "aux", "cfg_ahb", "ref". For "qcom,msm8996-qmp-usb3-phy" must contain: "aux", "cfg_ahb", "ref". - For "qcom,qmp-v3-usb3-phy" must contain: + For "qcom,sdm845-qmp-usb3-phy" must contain: + "aux", "cfg_ahb", "ref", "com_aux". + For "qcom,sdm845-qmp-usb3-uni-phy" must contain: "aux", "cfg_ahb", "ref", "com_aux". + For "qcom,sdm845-qmp-ufs-phy" must contain: + "ref", "ref_aux". - resets: a list of phandles and reset controller specifier pairs, one for each entry in reset-names. - reset-names: "phy" for reset of phy block, "common" for phy common block reset, - "cfg" for phy's ahb cfg block reset (Optional). + "cfg" for phy's ahb cfg block reset. + + For "qcom,ipq8074-qmp-pcie-phy" must contain: + "phy", "common". For "qcom,msm8996-qmp-pcie-phy" must contain: - "phy", "common", "cfg". + "phy", "common", "cfg". For "qcom,msm8996-qmp-usb3-phy" must contain - "phy", "common". - For "qcom,ipq8074-qmp-pcie-phy" must contain: - "phy", "common". + "phy", "common". + For "qcom,sdm845-qmp-usb3-phy" must contain: + "phy", "common". + For "qcom,sdm845-qmp-usb3-uni-phy" must contain: + "phy", "common". + For "qcom,sdm845-qmp-ufs-phy": no resets are listed. - vdda-phy-supply: Phandle to a regulator supply to PHY core block. - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block. @@ -79,9 +91,10 @@ Required properties for child node: - #phy-cells: must be 0 +Required properties child node of pcie and usb3 qmp phys: - clocks: a list of phandles and clock-specifier pairs, one for each entry in clock-names. - - clock-names: Must contain following for pcie and usb qmp phys: + - clock-names: Must contain following: "pipe<lane-number>" for pipe clock specific to each lane. - clock-output-names: Name of the PHY clock that will be the parent for the above pipe clock. @@ -91,9 +104,11 @@ Required properties for child node: (or) "pcie20_phy1_pipe_clk" +Required properties for child node of PHYs with lane reset, AKA: + "qcom,msm8996-qmp-pcie-phy" - resets: a list of phandles and reset controller specifier pairs, one for each entry in reset-names. - - reset-names: Must contain following for pcie qmp phys: + - reset-names: Must contain following: "lane<lane-number>" for reset specific to each lane. Example: diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c @@ -231,6 +231,7 @@ static const struct qusb2_phy_cfg sdm845_phy_cfg = { .mask_core_ready = CORE_READY_STATUS, .has_pll_override = true, .autoresume_en = BIT(0), + .update_tune1_with_efuse = true, }; static const char * const qusb2_phy_vreg_names[] = { @@ -402,10 +403,10 @@ static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy) /* * Read efuse register having TUNE2/1 parameter's high nibble. - * If efuse register shows value as 0x0, or if we fail to find - * a valid efuse register settings, then use default value - * as 0xB for high nibble that we have already set while - * configuring phy. + * If efuse register shows value as 0x0 (indicating value is not + * fused), or if we fail to find a valid efuse register setting, + * then use default value for high nibble that we have already + * set while configuring the phy. */ val = nvmem_cell_read(qphy->cell, NULL); if (IS_ERR(val) || !val[0]) { @@ -415,12 +416,13 @@ static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy) /* Fused TUNE1/2 value is the higher nibble only */ if (cfg->update_tune1_with_efuse) - qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1], - val[0] << 0x4); + qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1], + val[0] << HSTX_TRIM_SHIFT, + HSTX_TRIM_MASK); else - qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE2], - val[0] << 0x4); - + qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE2], + val[0] << HSTX_TRIM_SHIFT, + HSTX_TRIM_MASK); } static int qusb2_phy_set_mode(struct phy *phy, enum phy_mode mode) diff --git a/drivers/phy/socionext/Kconfig b/drivers/phy/socionext/Kconfig @@ -26,7 +26,8 @@ config PHY_UNIPHIER_USB3 config PHY_UNIPHIER_PCIE tristate "Uniphier PHY driver for PCIe controller" - depends on (ARCH_UNIPHIER || COMPILE_TEST) && OF + depends on ARCH_UNIPHIER || COMPILE_TEST + depends on OF && HAS_IOMEM default PCIE_UNIPHIER select GENERIC_PHY help diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c @@ -209,6 +209,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Microsoft LifeCam-VX700 v2.0 */ { USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Cherry Stream G230 2.0 (G85-231) and 3.0 (G85-232) */ + { USB_DEVICE(0x046a, 0x0023), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech HD Pro Webcams C920, C920-C, C925e and C930e */ { USB_DEVICE(0x046d, 0x082d), .driver_info = USB_QUIRK_DELAY_INIT }, { USB_DEVICE(0x046d, 0x0841), .driver_info = USB_QUIRK_DELAY_INIT }, diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c @@ -1470,9 +1470,6 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol) unsigned transfer_in_flight; unsigned started; - if (dep->flags & DWC3_EP_STALL) - return 0; - if (dep->number > 1) trb = dwc3_ep_prev_trb(dep, dep->trb_enqueue); else @@ -1494,8 +1491,6 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol) else dep->flags |= DWC3_EP_STALL; } else { - if (!(dep->flags & DWC3_EP_STALL)) - return 0; ret = dwc3_send_clear_stall_ep_cmd(dep); if (ret) diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c @@ -401,12 +401,12 @@ done: static void rx_fill(struct eth_dev *dev, gfp_t gfp_flags) { struct usb_request *req; - struct usb_request *tmp; unsigned long flags; /* fill unused rxq slots with some skb */ spin_lock_irqsave(&dev->req_lock, flags); - list_for_each_entry_safe(req, tmp, &dev->rx_reqs, list) { + while (!list_empty(&dev->rx_reqs)) { + req = list_first_entry(&dev->rx_reqs, struct usb_request, list); list_del_init(&req->list); spin_unlock_irqrestore(&dev->req_lock, flags); @@ -1125,7 +1125,6 @@ void gether_disconnect(struct gether *link) { struct eth_dev *dev = link->ioport; struct usb_request *req; - struct usb_request *tmp; WARN_ON(!dev); if (!dev) @@ -1142,7 +1141,8 @@ void gether_disconnect(struct gether *link) */ usb_ep_disable(link->in_ep); spin_lock(&dev->req_lock); - list_for_each_entry_safe(req, tmp, &dev->tx_reqs, list) { + while (!list_empty(&dev->tx_reqs)) { + req = list_first_entry(&dev->tx_reqs, struct usb_request, list); list_del(&req->list); spin_unlock(&dev->req_lock); @@ -1154,7 +1154,8 @@ void gether_disconnect(struct gether *link) usb_ep_disable(link->out_ep); spin_lock(&dev->req_lock); - list_for_each_entry_safe(req, tmp, &dev->rx_reqs, list) { + while (!list_empty(&dev->rx_reqs)) { + req = list_first_entry(&dev->rx_reqs, struct usb_request, list); list_del(&req->list); spin_unlock(&dev->req_lock); diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c @@ -2033,6 +2033,7 @@ static inline int machine_without_vbus_sense(void) { return machine_is_omap_innovator() || machine_is_omap_osk() + || machine_is_omap_palmte() || machine_is_sx1() /* No known omap7xx boards with vbus sense */ || cpu_is_omap7xx(); @@ -2041,7 +2042,7 @@ static inline int machine_without_vbus_sense(void) static int omap_udc_start(struct usb_gadget *g, struct usb_gadget_driver *driver) { - int status = -ENODEV; + int status; struct omap_ep *ep; unsigned long flags; @@ -2079,6 +2080,7 @@ static int omap_udc_start(struct usb_gadget *g, goto done; } } else { + status = 0; if (can_pullup(udc)) pullup_enable(udc); else @@ -2593,9 +2595,22 @@ omap_ep_setup(char *name, u8 addr, u8 type, static void omap_udc_release(struct device *dev) { - complete(udc->done); + pullup_disable(udc); + if (!IS_ERR_OR_NULL(udc->transceiver)) { + usb_put_phy(udc->transceiver); + udc->transceiver = NULL; + } + omap_writew(0, UDC_SYSCON1); + remove_proc_file(); + if (udc->dc_clk) { + if (udc->clk_requested) + omap_udc_enable_clock(0); + clk_put(udc->hhc_clk); + clk_put(udc->dc_clk); + } + if (udc->done) + complete(udc->done); kfree(udc); - udc = NULL; } static int @@ -2627,6 +2642,7 @@ omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv) udc->gadget.speed = USB_SPEED_UNKNOWN; udc->gadget.max_speed = USB_SPEED_FULL; udc->gadget.name = driver_name; + udc->gadget.quirk_ep_out_aligned_size = 1; udc->transceiver = xceiv; /* ep0 is special; put it right after the SETUP buffer */ @@ -2867,8 +2883,8 @@ bad_on_1710: udc->clr_halt = UDC_RESET_EP; /* USB general purpose IRQ: ep0, state changes, dma, etc */ - status = request_irq(pdev->resource[1].start, omap_udc_irq, - 0, driver_name, udc); + status = devm_request_irq(&pdev->dev, pdev->resource[1].start, + omap_udc_irq, 0, driver_name, udc); if (status != 0) { ERR("can't get irq %d, err %d\n", (int) pdev->resource[1].start, status); @@ -2876,20 +2892,20 @@ bad_on_1710: } /* USB "non-iso" IRQ (PIO for all but ep0) */ - status = request_irq(pdev->resource[2].start, omap_udc_pio_irq, - 0, "omap_udc pio", udc); + status = devm_request_irq(&pdev->dev, pdev->resource[2].start, + omap_udc_pio_irq, 0, "omap_udc pio", udc); if (status != 0) { ERR("can't get irq %d, err %d\n", (int) pdev->resource[2].start, status); - goto cleanup2; + goto cleanup1; } #ifdef USE_ISO - status = request_irq(pdev->resource[3].start, omap_udc_iso_irq, - 0, "omap_udc iso", udc); + status = devm_request_irq(&pdev->dev, pdev->resource[3].start, + omap_udc_iso_irq, 0, "omap_udc iso", udc); if (status != 0) { ERR("can't get irq %d, err %d\n", (int) pdev->resource[3].start, status); - goto cleanup3; + goto cleanup1; } #endif if (cpu_is_omap16xx() || cpu_is_omap7xx()) { @@ -2900,23 +2916,8 @@ bad_on_1710: } create_proc_file(); - status = usb_add_gadget_udc_release(&pdev->dev, &udc->gadget, - omap_udc_release); - if (status) - goto cleanup4; - - return 0; - -cleanup4: - remove_proc_file(); - -#ifdef USE_ISO -cleanup3: - free_irq(pdev->resource[2].start, udc); -#endif - -cleanup2: - free_irq(pdev->resource[1].start, udc); + return usb_add_gadget_udc_release(&pdev->dev, &udc->gadget, + omap_udc_release); cleanup1: kfree(udc); @@ -2943,42 +2944,15 @@ static int omap_udc_remove(struct platform_device *pdev) { DECLARE_COMPLETION_ONSTACK(done); - if (!udc) - return -ENODEV; - - usb_del_gadget_udc(&udc->gadget); - if (udc->driver) - return -EBUSY; - udc->done = &done; - pullup_disable(udc); - if (!IS_ERR_OR_NULL(udc->transceiver)) { - usb_put_phy(udc->transceiver); - udc->transceiver = NULL; - } - omap_writew(0, UDC_SYSCON1); - - remove_proc_file(); - -#ifdef USE_ISO - free_irq(pdev->resource[3].start, udc); -#endif - free_irq(pdev->resource[2].start, udc); - free_irq(pdev->resource[1].start, udc); + usb_del_gadget_udc(&udc->gadget); - if (udc->dc_clk) { - if (udc->clk_requested) - omap_udc_enable_clock(0); - clk_put(udc->hhc_clk); - clk_put(udc->dc_clk); - } + wait_for_completion(&done); release_mem_region(pdev->resource[0].start, pdev->resource[0].end - pdev->resource[0].start + 1); - wait_for_completion(&done); - return 0; } diff --git a/drivers/usb/storage/unusual_realtek.h b/drivers/usb/storage/unusual_realtek.h @@ -27,4 +27,14 @@ UNUSUAL_DEV(0x0bda, 0x0159, 0x0000, 0x9999, "USB Card Reader", USB_SC_DEVICE, USB_PR_DEVICE, init_realtek_cr, 0), +UNUSUAL_DEV(0x0bda, 0x0177, 0x0000, 0x9999, + "Realtek", + "USB Card Reader", + USB_SC_DEVICE, USB_PR_DEVICE, init_realtek_cr, 0), + +UNUSUAL_DEV(0x0bda, 0x0184, 0x0000, 0x9999, + "Realtek", + "USB Card Reader", + USB_SC_DEVICE, USB_PR_DEVICE, init_realtek_cr, 0), + #endif /* defined(CONFIG_USB_STORAGE_REALTEK) || ... */