whiterose

linux unikernel
Log | Files | Refs | README | LICENSE | git clone https://git.ne02ptzero.me/git/whiterose

commit 4f0237062ca70c8e34e16e518aee4b84c30d1832
parent 6bc3fe8e7e172d5584e529a04cf9eec946428768
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date:   Mon, 11 Mar 2019 10:57:11 -0700

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

 - update the ili210x touchscreen driver, refreshing the code and adding
   support for ILI251X line

 - add support for st1633 to the st1232 touchscreen driver

 - add support for sx8650 to the the sx8654 touchscreen driver

 - add support for Evervision FT5726 to the edt-ft5x06 touchscreen
   driver

 - add support for gt5688 to the Goodix touchscreen driver

 - new vibrator driver for MSM SOCs

 - miscellaneous fixes for the rest of input drivers

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (53 commits)
  Input: wacom_serial4 - add support for Wacom ArtPad II tablet
  Input: elan_i2c - add id for touchpad found in Lenovo s21e-20
  Input: raspberrypi-ts - select CONFIG_INPUT_POLLDEV
  Input: msm-vibrator - use correct gpio header
  Input: ti_am335x_tsc - remove set but not used variable 'tscadc_dev'
  Input: i8042 - rework DT node name comparisons
  Input: goodix - print values in case of inconsistencies
  Input: goodix - refer to touchscreen.txt in device tree bindings
  Input: goodix - support Goodix gt5688
  Input: synaptics_i2c - remove redundant spinlock
  Input: db9 - mark expected switch fall-through
  Input: qt2160 - remove redundant spinlock
  Input: st1232 - handle common DT bindings
  Input: ims-pcu - switch to using brightness_set_blocking()
  Input: st1232 - switch to gpiod API
  Input: ili210x - fetch touchscreen geometry from DT
  Input: msm-vibrator - tweak an error message
  Input: tm2-touchkey - acknowledge that setting brightness is a blocking call
  Input: stmfts - acknowledge that setting brightness is a blocking call
  Input: ili210x - switch to using devm_device_add_group()
  ...

Diffstat:
MDocumentation/devicetree/bindings/input/cypress,tm2-touchkey.txt | 9++++++++-
ADocumentation/devicetree/bindings/input/ilitek,ili2xxx.txt | 25+++++++++++++++++++++++++
ADocumentation/devicetree/bindings/input/msm-vibrator.txt | 36++++++++++++++++++++++++++++++++++++
MDocumentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt | 13++++++++++++-
MDocumentation/devicetree/bindings/input/touchscreen/goodix.txt | 14+++++++++-----
MDocumentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt | 8++++++--
MDocumentation/devicetree/bindings/input/touchscreen/sx8654.txt | 10+++++++++-
Mdrivers/input/joystick/db9.c | 2+-
Mdrivers/input/keyboard/gpio_keys.c | 10++++++++++
Mdrivers/input/keyboard/mcs_touchkey.c | 5++---
Mdrivers/input/keyboard/mtk-pmic-keys.c | 13++++++-------
Mdrivers/input/keyboard/qt2160.c | 9---------
Mdrivers/input/keyboard/tca6416-keypad.c | 4+---
Mdrivers/input/keyboard/tm2-touchkey.c | 136+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--------------------
Mdrivers/input/misc/Kconfig | 10++++++++++
Mdrivers/input/misc/Makefile | 1+
Mdrivers/input/misc/ims-pcu.c | 27++++++++-------------------
Adrivers/input/misc/msm-vibrator.c | 281+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Mdrivers/input/misc/soc_button_array.c | 6+++++-
Mdrivers/input/mouse/elan_i2c_core.c | 1+
Mdrivers/input/mouse/synaptics_i2c.c | 22++++------------------
Mdrivers/input/serio/i8042-sparcio.h | 21++++++++++-----------
Mdrivers/input/tablet/wacom_serial4.c | 2++
Mdrivers/input/touchscreen/Kconfig | 7++++---
Mdrivers/input/touchscreen/ad7879.c | 11+++++++----
Mdrivers/input/touchscreen/edt-ft5x06.c | 110+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------
Mdrivers/input/touchscreen/goodix.c | 6+++++-
Mdrivers/input/touchscreen/ili210x.c | 321++++++++++++++++++++++++++++++++++++++++++++++++-------------------------------
Mdrivers/input/touchscreen/st1232.c | 154+++++++++++++++++++++++++++++++++++++++++++++++++++++--------------------------
Mdrivers/input/touchscreen/stmfts.c | 30++++++++++++++++--------------
Mdrivers/input/touchscreen/sx8654.c | 255++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---------
Mdrivers/input/touchscreen/ti_am335x_tsc.c | 4----
Dinclude/linux/input/ili210x.h | 11-----------
33 files changed, 1207 insertions(+), 367 deletions(-)

diff --git a/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt @@ -1,13 +1,19 @@ Samsung tm2-touchkey Required properties: -- compatible: must be "cypress,tm2-touchkey" +- compatible: + * "cypress,tm2-touchkey" - for the touchkey found on the tm2 board + * "cypress,midas-touchkey" - for the touchkey found on midas boards + * "cypress,aries-touchkey" - for the touchkey found on aries boards - reg: I2C address of the chip. - interrupts: interrupt to which the chip is connected (see interrupt binding[0]). - vcc-supply : internal regulator output. 1.8V - vdd-supply : power supply for IC 3.3V +Optional properties: +- linux,keycodes: array of keycodes (max 4), default KEY_PHONE and KEY_BACK + [0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt Example: @@ -21,5 +27,6 @@ Example: interrupts = <2 IRQ_TYPE_EDGE_FALLING>; vcc-supply=<&ldo32_reg>; vdd-supply=<&ldo33_reg>; + linux,keycodes = <KEY_PHONE KEY_BACK>; }; }; diff --git a/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt b/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt @@ -0,0 +1,25 @@ +Ilitek ILI210x/ILI251x touchscreen controller + +Required properties: +- compatible: + ilitek,ili210x for ILI210x + ilitek,ili251x for ILI251x + +- reg: The I2C address of the device + +- interrupts: The sink for the touchscreen's IRQ output + See ../interrupt-controller/interrupts.txt + +Optional properties for main touchpad device: + +- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low) + +Example: + + touchscreen@41 { + compatible = "ilitek,ili251x"; + reg = <0x41>; + interrupt-parent = <&gpio4>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>; + }; diff --git a/Documentation/devicetree/bindings/input/msm-vibrator.txt b/Documentation/devicetree/bindings/input/msm-vibrator.txt @@ -0,0 +1,36 @@ +* Device tree bindings for the Qualcomm MSM vibrator + +Required properties: + + - compatible: Should be one of + "qcom,msm8226-vibrator" + "qcom,msm8974-vibrator" + - reg: the base address and length of the IO memory for the registers. + - pinctrl-names: set to default. + - pinctrl-0: phandles pointing to pin configuration nodes. See + Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt + - clock-names: set to pwm + - clocks: phandle of the clock. See + Documentation/devicetree/bindings/clock/clock-bindings.txt + - enable-gpios: GPIO that enables the vibrator. + +Optional properties: + + - vcc-supply: phandle to the regulator that provides power to the sensor. + +Example from a LG Nexus 5 (hammerhead) phone: + +vibrator@fd8c3450 { + reg = <0xfd8c3450 0x400>; + compatible = "qcom,msm8974-vibrator"; + + vcc-supply = <&pm8941_l19>; + + clocks = <&mmcc CAMSS_GP1_CLK>; + clock-names = "pwm"; + + enable-gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_pin>; +}; diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt @@ -1,11 +1,12 @@ FocalTech EDT-FT5x06 Polytouch driver ===================================== -There are 3 variants of the chip for various touch panel sizes +There are 5 variants of the chip for various touch panel sizes FT5206GE1 2.8" .. 3.8" FT5306DE4 4.3" .. 7" FT5406EE8 7" .. 8.9" FT5506EEG 7" .. 8.9" +FT5726NEI 5.7” .. 11.6" The software interface is identical for all those chips, so that currently there is no need for the driver to distinguish between the @@ -19,6 +20,7 @@ Required properties: or: "edt,edt-ft5306" or: "edt,edt-ft5406" or: "edt,edt-ft5506" + or: "evervision,ev-ft5726" or: "focaltech,ft6236" - reg: I2C slave address of the chip (0x38) @@ -42,6 +44,15 @@ Optional properties: - offset: allows setting the edge compensation in the range from 0 to 31. + + - offset-x: Same as offset, but applies only to the horizontal position. + Range from 0 to 80, only supported by evervision,ev-ft5726 + devices. + + - offset-y: Same as offset, but applies only to the vertical position. + Range from 0 to 80, only supported by evervision,ev-ft5726 + devices. + - touchscreen-size-x : See touchscreen.txt - touchscreen-size-y : See touchscreen.txt - touchscreen-fuzz-x : See touchscreen.txt diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt @@ -3,6 +3,7 @@ Device tree bindings for Goodix GT9xx series touchscreen controller Required properties: - compatible : Should be "goodix,gt1151" + or "goodix,gt5688" or "goodix,gt911" or "goodix,gt9110" or "goodix,gt912" @@ -18,11 +19,14 @@ Optional properties: - irq-gpios : GPIO pin used for IRQ. The driver uses the interrupt gpio pin as output to reset the device. - reset-gpios : GPIO pin used for reset - - - touchscreen-inverted-x : X axis is inverted (boolean) - - touchscreen-inverted-y : Y axis is inverted (boolean) - - touchscreen-swapped-x-y : X and Y axis are swapped (boolean) - (swapping is done after inverting the axis) + - touchscreen-inverted-x + - touchscreen-inverted-y + - touchscreen-size-x + - touchscreen-size-y + - touchscreen-swapped-x-y + +The touchscreen-* properties are documented in touchscreen.txt in this +directory. Example: diff --git a/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt b/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt @@ -1,13 +1,17 @@ -* Sitronix st1232 touchscreen controller +* Sitronix st1232 or st1633 touchscreen controller Required properties: -- compatible: must be "sitronix,st1232" +- compatible: must contain one of + * "sitronix,st1232" + * "sitronix,st1633" - reg: I2C address of the chip - interrupts: interrupt to which the chip is connected Optional properties: - gpios: a phandle to the reset GPIO +For additional optional properties see: touchscreen.txt + Example: i2c@00000000 { diff --git a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt @@ -1,10 +1,17 @@ * Semtech SX8654 I2C Touchscreen Controller Required properties: -- compatible: must be "semtech,sx8654" +- compatible: must be one of the following, depending on the model: + "semtech,sx8650" + "semtech,sx8654" + "semtech,sx8655" + "semtech,sx8656" - reg: i2c slave address - interrupts: touch controller interrupt +Optional properties: + - reset-gpios: GPIO specification for the NRST input + Example: sx8654@48 { @@ -12,4 +19,5 @@ Example: reg = <0x48>; interrupt-parent = <&gpio6>; interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; }; diff --git a/drivers/input/joystick/db9.c b/drivers/input/joystick/db9.c @@ -259,7 +259,7 @@ static unsigned char db9_saturn_read_packet(struct parport *port, unsigned char db9_saturn_write_sub(port, type, 3, powered, 0); return data[0] = 0xe3; } - /* else: fall through */ + /* fall through */ default: return data[0]; } diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c @@ -1015,8 +1015,18 @@ static int __maybe_unused gpio_keys_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(gpio_keys_pm_ops, gpio_keys_suspend, gpio_keys_resume); +static void gpio_keys_shutdown(struct platform_device *pdev) +{ + int ret; + + ret = gpio_keys_suspend(&pdev->dev); + if (ret) + dev_err(&pdev->dev, "failed to shutdown\n"); +} + static struct platform_driver gpio_keys_device_driver = { .probe = gpio_keys_probe, + .shutdown = gpio_keys_shutdown, .driver = { .name = "gpio-keys", .pm = &gpio_keys_pm_ops, diff --git a/drivers/input/keyboard/mcs_touchkey.c b/drivers/input/keyboard/mcs_touchkey.c @@ -113,9 +113,8 @@ static int mcs_touchkey_probe(struct i2c_client *client, return -EINVAL; } - data = kzalloc(sizeof(struct mcs_touchkey_data) + - sizeof(data->keycodes[0]) * (pdata->key_maxval + 1), - GFP_KERNEL); + data = kzalloc(struct_size(data, keycodes, pdata->key_maxval + 1), + GFP_KERNEL); input_dev = input_allocate_device(); if (!data || !input_dev) { dev_err(&client->dev, "Failed to allocate memory\n"); diff --git a/drivers/input/keyboard/mtk-pmic-keys.c b/drivers/input/keyboard/mtk-pmic-keys.c @@ -14,18 +14,17 @@ * */ -#include <linux/module.h> -#include <linux/kernel.h> #include <linux/input.h> #include <linux/interrupt.h> -#include <linux/platform_device.h> #include <linux/kernel.h> -#include <linux/of.h> -#include <linux/of_device.h> -#include <linux/regmap.h> #include <linux/mfd/mt6323/registers.h> -#include <linux/mfd/mt6397/registers.h> #include <linux/mfd/mt6397/core.h> +#include <linux/mfd/mt6397/registers.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> #define MTK_PMIC_PWRKEY_RST_EN_MASK 0x1 #define MTK_PMIC_PWRKEY_RST_EN_SHIFT 6 diff --git a/drivers/input/keyboard/qt2160.c b/drivers/input/keyboard/qt2160.c @@ -68,7 +68,6 @@ struct qt2160_data { struct i2c_client *client; struct input_dev *input; struct delayed_work dwork; - spinlock_t lock; /* Protects canceling/rescheduling of dwork */ unsigned short keycodes[ARRAY_SIZE(qt2160_key2code)]; u16 key_matrix; #ifdef CONFIG_LEDS_CLASS @@ -212,22 +211,15 @@ static int qt2160_get_key_matrix(struct qt2160_data *qt2160) static irqreturn_t qt2160_irq(int irq, void *_qt2160) { struct qt2160_data *qt2160 = _qt2160; - unsigned long flags; - - spin_lock_irqsave(&qt2160->lock, flags); mod_delayed_work(system_wq, &qt2160->dwork, 0); - spin_unlock_irqrestore(&qt2160->lock, flags); - return IRQ_HANDLED; } static void qt2160_schedule_read(struct qt2160_data *qt2160) { - spin_lock_irq(&qt2160->lock); schedule_delayed_work(&qt2160->dwork, QT2160_CYCLE_INTERVAL); - spin_unlock_irq(&qt2160->lock); } static void qt2160_worker(struct work_struct *work) @@ -391,7 +383,6 @@ static int qt2160_probe(struct i2c_client *client, qt2160->client = client; qt2160->input = input; INIT_DELAYED_WORK(&qt2160->dwork, qt2160_worker); - spin_lock_init(&qt2160->lock); input->name = "AT42QT2160 Touch Sense Keyboard"; input->id.bustype = BUS_I2C; diff --git a/drivers/input/keyboard/tca6416-keypad.c b/drivers/input/keyboard/tca6416-keypad.c @@ -219,9 +219,7 @@ static int tca6416_keypad_probe(struct i2c_client *client, return -EINVAL; } - chip = kzalloc(sizeof(struct tca6416_keypad_chip) + - pdata->nbuttons * sizeof(struct tca6416_button), - GFP_KERNEL); + chip = kzalloc(struct_size(chip, buttons, pdata->nbuttons), GFP_KERNEL); input = input_allocate_device(); if (!chip || !input) { error = -ENOMEM; diff --git a/drivers/input/keyboard/tm2-touchkey.c b/drivers/input/keyboard/tm2-touchkey.c @@ -22,12 +22,14 @@ #include <linux/leds.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/of_device.h> #include <linux/pm.h> #include <linux/regulator/consumer.h> #define TM2_TOUCHKEY_DEV_NAME "tm2-touchkey" -#define TM2_TOUCHKEY_KEYCODE_REG 0x03 -#define TM2_TOUCHKEY_BASE_REG 0x00 + +#define ARIES_TOUCHKEY_CMD_LED_ON 0x1 +#define ARIES_TOUCHKEY_CMD_LED_OFF 0x2 #define TM2_TOUCHKEY_CMD_LED_ON 0x10 #define TM2_TOUCHKEY_CMD_LED_OFF 0x20 #define TM2_TOUCHKEY_BIT_PRESS_EV BIT(3) @@ -35,9 +37,13 @@ #define TM2_TOUCHKEY_LED_VOLTAGE_MIN 2500000 #define TM2_TOUCHKEY_LED_VOLTAGE_MAX 3300000 -enum { - TM2_TOUCHKEY_KEY_MENU = 0x1, - TM2_TOUCHKEY_KEY_BACK, +struct touchkey_variant { + u8 keycode_reg; + u8 base_reg; + u8 cmd_led_on; + u8 cmd_led_off; + bool no_reg; + bool fixed_regulator; }; struct tm2_touchkey_data { @@ -46,9 +52,33 @@ struct tm2_touchkey_data { struct led_classdev led_dev; struct regulator *vdd; struct regulator_bulk_data regulators[2]; + const struct touchkey_variant *variant; + u32 keycodes[4]; + int num_keycodes; +}; + +static const struct touchkey_variant tm2_touchkey_variant = { + .keycode_reg = 0x03, + .base_reg = 0x00, + .cmd_led_on = TM2_TOUCHKEY_CMD_LED_ON, + .cmd_led_off = TM2_TOUCHKEY_CMD_LED_OFF, +}; + +static const struct touchkey_variant midas_touchkey_variant = { + .keycode_reg = 0x00, + .base_reg = 0x00, + .cmd_led_on = TM2_TOUCHKEY_CMD_LED_ON, + .cmd_led_off = TM2_TOUCHKEY_CMD_LED_OFF, }; -static void tm2_touchkey_led_brightness_set(struct led_classdev *led_dev, +static struct touchkey_variant aries_touchkey_variant = { + .no_reg = true, + .fixed_regulator = true, + .cmd_led_on = ARIES_TOUCHKEY_CMD_LED_ON, + .cmd_led_off = ARIES_TOUCHKEY_CMD_LED_OFF, +}; + +static int tm2_touchkey_led_brightness_set(struct led_classdev *led_dev, enum led_brightness brightness) { struct tm2_touchkey_data *touchkey = @@ -58,15 +88,19 @@ static void tm2_touchkey_led_brightness_set(struct led_classdev *led_dev, if (brightness == LED_OFF) { volt = TM2_TOUCHKEY_LED_VOLTAGE_MIN; - data = TM2_TOUCHKEY_CMD_LED_OFF; + data = touchkey->variant->cmd_led_off; } else { volt = TM2_TOUCHKEY_LED_VOLTAGE_MAX; - data = TM2_TOUCHKEY_CMD_LED_ON; + data = touchkey->variant->cmd_led_on; } - regulator_set_voltage(touchkey->vdd, volt, volt); - i2c_smbus_write_byte_data(touchkey->client, - TM2_TOUCHKEY_BASE_REG, data); + if (!touchkey->variant->fixed_regulator) + regulator_set_voltage(touchkey->vdd, volt, volt); + + return touchkey->variant->no_reg ? + i2c_smbus_write_byte(touchkey->client, data) : + i2c_smbus_write_byte_data(touchkey->client, + touchkey->variant->base_reg, data); } static int tm2_touchkey_power_enable(struct tm2_touchkey_data *touchkey) @@ -96,49 +130,57 @@ static irqreturn_t tm2_touchkey_irq_handler(int irq, void *devid) { struct tm2_touchkey_data *touchkey = devid; int data; - int key; - - data = i2c_smbus_read_byte_data(touchkey->client, - TM2_TOUCHKEY_KEYCODE_REG); + int index; + int i; + + if (touchkey->variant->no_reg) + data = i2c_smbus_read_byte(touchkey->client); + else + data = i2c_smbus_read_byte_data(touchkey->client, + touchkey->variant->keycode_reg); if (data < 0) { dev_err(&touchkey->client->dev, "failed to read i2c data: %d\n", data); goto out; } - switch (data & TM2_TOUCHKEY_BIT_KEYCODE) { - case TM2_TOUCHKEY_KEY_MENU: - key = KEY_PHONE; - break; - - case TM2_TOUCHKEY_KEY_BACK: - key = KEY_BACK; - break; - - default: + index = (data & TM2_TOUCHKEY_BIT_KEYCODE) - 1; + if (index < 0 || index >= touchkey->num_keycodes) { dev_warn(&touchkey->client->dev, - "unhandled keycode, data %#02x\n", data); + "invalid keycode index %d\n", index); goto out; } if (data & TM2_TOUCHKEY_BIT_PRESS_EV) { - input_report_key(touchkey->input_dev, KEY_PHONE, 0); - input_report_key(touchkey->input_dev, KEY_BACK, 0); + for (i = 0; i < touchkey->num_keycodes; i++) + input_report_key(touchkey->input_dev, + touchkey->keycodes[i], 0); } else { - input_report_key(touchkey->input_dev, key, 1); + input_report_key(touchkey->input_dev, + touchkey->keycodes[index], 1); } input_sync(touchkey->input_dev); out: + if (touchkey->variant->fixed_regulator && + data & TM2_TOUCHKEY_BIT_PRESS_EV) { + /* touch turns backlight on, so make sure we're in sync */ + if (touchkey->led_dev.brightness == LED_OFF) + tm2_touchkey_led_brightness_set(&touchkey->led_dev, + LED_OFF); + } + return IRQ_HANDLED; } static int tm2_touchkey_probe(struct i2c_client *client, const struct i2c_device_id *id) { + struct device_node *np = client->dev.of_node; struct tm2_touchkey_data *touchkey; int error; + int i; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA)) { @@ -153,6 +195,8 @@ static int tm2_touchkey_probe(struct i2c_client *client, touchkey->client = client; i2c_set_clientdata(client, touchkey); + touchkey->variant = of_device_get_match_data(&client->dev); + touchkey->regulators[0].supply = "vcc"; touchkey->regulators[1].supply = "vdd"; error = devm_regulator_bulk_get(&client->dev, @@ -166,6 +210,16 @@ static int tm2_touchkey_probe(struct i2c_client *client, /* Save VDD for easy access */ touchkey->vdd = touchkey->regulators[1].consumer; + touchkey->num_keycodes = of_property_read_variable_u32_array(np, + "linux,keycodes", touchkey->keycodes, 0, + ARRAY_SIZE(touchkey->keycodes)); + if (touchkey->num_keycodes <= 0) { + /* default keycodes */ + touchkey->keycodes[0] = KEY_PHONE; + touchkey->keycodes[1] = KEY_BACK; + touchkey->num_keycodes = 2; + } + error = tm2_touchkey_power_enable(touchkey); if (error) { dev_err(&client->dev, "failed to power up device: %d\n", error); @@ -190,8 +244,9 @@ static int tm2_touchkey_probe(struct i2c_client *client, touchkey->input_dev->name = TM2_TOUCHKEY_DEV_NAME; touchkey->input_dev->id.bustype = BUS_I2C; - input_set_capability(touchkey->input_dev, EV_KEY, KEY_PHONE); - input_set_capability(touchkey->input_dev, EV_KEY, KEY_BACK); + for (i = 0; i < touchkey->num_keycodes; i++) + input_set_capability(touchkey->input_dev, EV_KEY, + touchkey->keycodes[i]); error = input_register_device(touchkey->input_dev); if (error) { @@ -212,9 +267,10 @@ static int tm2_touchkey_probe(struct i2c_client *client, /* led device */ touchkey->led_dev.name = TM2_TOUCHKEY_DEV_NAME; - touchkey->led_dev.brightness = LED_FULL; + touchkey->led_dev.brightness = LED_ON; touchkey->led_dev.max_brightness = LED_ON; - touchkey->led_dev.brightness_set = tm2_touchkey_led_brightness_set; + touchkey->led_dev.brightness_set_blocking = + tm2_touchkey_led_brightness_set; error = devm_led_classdev_register(&client->dev, &touchkey->led_dev); if (error) { @@ -223,6 +279,9 @@ static int tm2_touchkey_probe(struct i2c_client *client, return error; } + if (touchkey->variant->fixed_regulator) + tm2_touchkey_led_brightness_set(&touchkey->led_dev, LED_ON); + return 0; } @@ -262,7 +321,16 @@ static const struct i2c_device_id tm2_touchkey_id_table[] = { MODULE_DEVICE_TABLE(i2c, tm2_touchkey_id_table); static const struct of_device_id tm2_touchkey_of_match[] = { - { .compatible = "cypress,tm2-touchkey", }, + { + .compatible = "cypress,tm2-touchkey", + .data = &tm2_touchkey_variant, + }, { + .compatible = "cypress,midas-touchkey", + .data = &midas_touchkey_variant, + }, { + .compatible = "cypress,aries-touchkey", + .data = &aries_touchkey_variant, + }, { }, }; MODULE_DEVICE_TABLE(of, tm2_touchkey_of_match); diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig @@ -117,6 +117,16 @@ config INPUT_E3X0_BUTTON To compile this driver as a module, choose M here: the module will be called e3x0_button. +config INPUT_MSM_VIBRATOR + tristate "Qualcomm MSM vibrator driver" + select INPUT_FF_MEMLESS + help + Support for the vibrator that is found on various Qualcomm MSM + SOCs. + + To compile this driver as a module, choose M here: the module + will be called msm_vibrator. + config INPUT_PCSPKR tristate "PC Speaker support" depends on PCSPKR_PLATFORM diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_INPUT_MAX8925_ONKEY) += max8925_onkey.o obj-$(CONFIG_INPUT_MAX8997_HAPTIC) += max8997_haptic.o obj-$(CONFIG_INPUT_MC13783_PWRBUTTON) += mc13783-pwrbutton.o obj-$(CONFIG_INPUT_MMA8450) += mma8450.o +obj-$(CONFIG_INPUT_MSM_VIBRATOR) += msm-vibrator.o obj-$(CONFIG_INPUT_PALMAS_PWRBUTTON) += palmas-pwrbutton.o obj-$(CONFIG_INPUT_PCAP) += pcap_keys.o obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o diff --git a/drivers/input/misc/ims-pcu.c b/drivers/input/misc/ims-pcu.c @@ -39,8 +39,6 @@ struct ims_pcu_gamepad { struct ims_pcu_backlight { struct led_classdev cdev; - struct work_struct work; - enum led_brightness desired_brightness; char name[32]; }; @@ -949,14 +947,14 @@ out: #define IMS_PCU_MAX_BRIGHTNESS 31998 -static void ims_pcu_backlight_work(struct work_struct *work) +static int ims_pcu_backlight_set_brightness(struct led_classdev *cdev, + enum led_brightness value) { struct ims_pcu_backlight *backlight = - container_of(work, struct ims_pcu_backlight, work); + container_of(cdev, struct ims_pcu_backlight, cdev); struct ims_pcu *pcu = container_of(backlight, struct ims_pcu, backlight); - int desired_brightness = backlight->desired_brightness; - __le16 br_val = cpu_to_le16(desired_brightness); + __le16 br_val = cpu_to_le16(value); int error; mutex_lock(&pcu->cmd_mutex); @@ -966,19 +964,11 @@ static void ims_pcu_backlight_work(struct work_struct *work) if (error && error != -ENODEV) dev_warn(pcu->dev, "Failed to set desired brightness %u, error: %d\n", - desired_brightness, error); + value, error); mutex_unlock(&pcu->cmd_mutex); -} -static void ims_pcu_backlight_set_brightness(struct led_classdev *cdev, - enum led_brightness value) -{ - struct ims_pcu_backlight *backlight = - container_of(cdev, struct ims_pcu_backlight, cdev); - - backlight->desired_brightness = value; - schedule_work(&backlight->work); + return error; } static enum led_brightness @@ -1015,14 +1005,14 @@ static int ims_pcu_setup_backlight(struct ims_pcu *pcu) struct ims_pcu_backlight *backlight = &pcu->backlight; int error; - INIT_WORK(&backlight->work, ims_pcu_backlight_work); snprintf(backlight->name, sizeof(backlight->name), "pcu%d::kbd_backlight", pcu->device_no); backlight->cdev.name = backlight->name; backlight->cdev.max_brightness = IMS_PCU_MAX_BRIGHTNESS; backlight->cdev.brightness_get = ims_pcu_backlight_get_brightness; - backlight->cdev.brightness_set = ims_pcu_backlight_set_brightness; + backlight->cdev.brightness_set_blocking = + ims_pcu_backlight_set_brightness; error = led_classdev_register(pcu->dev, &backlight->cdev); if (error) { @@ -1040,7 +1030,6 @@ static void ims_pcu_destroy_backlight(struct ims_pcu *pcu) struct ims_pcu_backlight *backlight = &pcu->backlight; led_classdev_unregister(&backlight->cdev); - cancel_work_sync(&backlight->work); } diff --git a/drivers/input/misc/msm-vibrator.c b/drivers/input/misc/msm-vibrator.c @@ -0,0 +1,281 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Qualcomm MSM vibrator driver + * + * Copyright (c) 2018 Brian Masney <masneyb@onstation.org> + * + * Based on qcom,pwm-vibrator.c from: + * Copyright (c) 2018 Jonathan Marek <jonathan@marek.ca> + * + * Based on msm_pwm_vibrator.c from downstream Android sources: + * Copyright (C) 2009-2014 LGE, Inc. + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/gpio/consumer.h> +#include <linux/input.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> + +#define REG_CMD_RCGR 0x00 +#define REG_CFG_RCGR 0x04 +#define REG_M 0x08 +#define REG_N 0x0C +#define REG_D 0x10 +#define REG_CBCR 0x24 +#define MMSS_CC_M_DEFAULT 1 + +struct msm_vibrator { + struct input_dev *input; + struct mutex mutex; + struct work_struct worker; + void __iomem *base; + struct regulator *vcc; + struct clk *clk; + struct gpio_desc *enable_gpio; + u16 magnitude; + bool enabled; +}; + +static void msm_vibrator_write(struct msm_vibrator *vibrator, int offset, + u32 value) +{ + writel(value, vibrator->base + offset); +} + +static int msm_vibrator_start(struct msm_vibrator *vibrator) +{ + int d_reg_val, ret = 0; + + mutex_lock(&vibrator->mutex); + + if (!vibrator->enabled) { + ret = clk_set_rate(vibrator->clk, 24000); + if (ret) { + dev_err(&vibrator->input->dev, + "Failed to set clock rate: %d\n", ret); + goto unlock; + } + + ret = clk_prepare_enable(vibrator->clk); + if (ret) { + dev_err(&vibrator->input->dev, + "Failed to enable clock: %d\n", ret); + goto unlock; + } + + ret = regulator_enable(vibrator->vcc); + if (ret) { + dev_err(&vibrator->input->dev, + "Failed to enable regulator: %d\n", ret); + clk_disable(vibrator->clk); + goto unlock; + } + + gpiod_set_value_cansleep(vibrator->enable_gpio, 1); + + vibrator->enabled = true; + } + + d_reg_val = 127 - ((126 * vibrator->magnitude) / 0xffff); + msm_vibrator_write(vibrator, REG_CFG_RCGR, + (2 << 12) | /* dual edge mode */ + (0 << 8) | /* cxo */ + (7 << 0)); + msm_vibrator_write(vibrator, REG_M, 1); + msm_vibrator_write(vibrator, REG_N, 128); + msm_vibrator_write(vibrator, REG_D, d_reg_val); + msm_vibrator_write(vibrator, REG_CMD_RCGR, 1); + msm_vibrator_write(vibrator, REG_CBCR, 1); + +unlock: + mutex_unlock(&vibrator->mutex); + + return ret; +} + +static void msm_vibrator_stop(struct msm_vibrator *vibrator) +{ + mutex_lock(&vibrator->mutex); + + if (vibrator->enabled) { + gpiod_set_value_cansleep(vibrator->enable_gpio, 0); + regulator_disable(vibrator->vcc); + clk_disable(vibrator->clk); + vibrator->enabled = false; + } + + mutex_unlock(&vibrator->mutex); +} + +static void msm_vibrator_worker(struct work_struct *work) +{ + struct msm_vibrator *vibrator = container_of(work, + struct msm_vibrator, + worker); + + if (vibrator->magnitude) + msm_vibrator_start(vibrator); + else + msm_vibrator_stop(vibrator); +} + +static int msm_vibrator_play_effect(struct input_dev *dev, void *data, + struct ff_effect *effect) +{ + struct msm_vibrator *vibrator = input_get_drvdata(dev); + + mutex_lock(&vibrator->mutex); + + if (effect->u.rumble.strong_magnitude > 0) + vibrator->magnitude = effect->u.rumble.strong_magnitude; + else + vibrator->magnitude = effect->u.rumble.weak_magnitude; + + mutex_unlock(&vibrator->mutex); + + schedule_work(&vibrator->worker); + + return 0; +} + +static void msm_vibrator_close(struct input_dev *input) +{ + struct msm_vibrator *vibrator = input_get_drvdata(input); + + cancel_work_sync(&vibrator->worker); + msm_vibrator_stop(vibrator); +} + +static int msm_vibrator_probe(struct platform_device *pdev) +{ + struct msm_vibrator *vibrator; + struct resource *res; + int ret; + + vibrator = devm_kzalloc(&pdev->dev, sizeof(*vibrator), GFP_KERNEL); + if (!vibrator) + return -ENOMEM; + + vibrator->input = devm_input_allocate_device(&pdev->dev); + if (!vibrator->input) + return -ENOMEM; + + vibrator->vcc = devm_regulator_get(&pdev->dev, "vcc"); + if (IS_ERR(vibrator->vcc)) { + if (PTR_ERR(vibrator->vcc) != -EPROBE_DEFER) + dev_err(&pdev->dev, "Failed to get regulator: %ld\n", + PTR_ERR(vibrator->vcc)); + return PTR_ERR(vibrator->vcc); + } + + vibrator->enable_gpio = devm_gpiod_get(&pdev->dev, "enable", + GPIOD_OUT_LOW); + if (IS_ERR(vibrator->enable_gpio)) { + if (PTR_ERR(vibrator->enable_gpio) != -EPROBE_DEFER) + dev_err(&pdev->dev, "Failed to get enable gpio: %ld\n", + PTR_ERR(vibrator->enable_gpio)); + return PTR_ERR(vibrator->enable_gpio); + } + + vibrator->clk = devm_clk_get(&pdev->dev, "pwm"); + if (IS_ERR(vibrator->clk)) { + if (PTR_ERR(vibrator->clk) != -EPROBE_DEFER) + dev_err(&pdev->dev, "Failed to lookup pwm clock: %ld\n", + PTR_ERR(vibrator->clk)); + return PTR_ERR(vibrator->clk); + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Failed to get platform resource\n"); + return -ENODEV; + } + + vibrator->base = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); + if (!vibrator->base) { + dev_err(&pdev->dev, "Failed to iomap resource.\n"); + return -ENOMEM; + } + + vibrator->enabled = false; + mutex_init(&vibrator->mutex); + INIT_WORK(&vibrator->worker, msm_vibrator_worker); + + vibrator->input->name = "msm-vibrator"; + vibrator->input->id.bustype = BUS_HOST; + vibrator->input->close = msm_vibrator_close; + + input_set_drvdata(vibrator->input, vibrator); + input_set_capability(vibrator->input, EV_FF, FF_RUMBLE); + + ret = input_ff_create_memless(vibrator->input, NULL, + msm_vibrator_play_effect); + if (ret) { + dev_err(&pdev->dev, "Failed to create ff memless: %d", ret); + return ret; + } + + ret = input_register_device(vibrator->input); + if (ret) { + dev_err(&pdev->dev, "Failed to register input device: %d", ret); + return ret; + } + + platform_set_drvdata(pdev, vibrator); + + return 0; +} + +static int __maybe_unused msm_vibrator_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct msm_vibrator *vibrator = platform_get_drvdata(pdev); + + cancel_work_sync(&vibrator->worker); + + if (vibrator->enabled) + msm_vibrator_stop(vibrator); + + return 0; +} + +static int __maybe_unused msm_vibrator_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct msm_vibrator *vibrator = platform_get_drvdata(pdev); + + if (vibrator->enabled) + msm_vibrator_start(vibrator); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(msm_vibrator_pm_ops, msm_vibrator_suspend, + msm_vibrator_resume); + +static const struct of_device_id msm_vibrator_of_match[] = { + { .compatible = "qcom,msm8226-vibrator" }, + { .compatible = "qcom,msm8974-vibrator" }, + {}, +}; +MODULE_DEVICE_TABLE(of, msm_vibrator_of_match); + +static struct platform_driver msm_vibrator_driver = { + .probe = msm_vibrator_probe, + .driver = { + .name = "msm-vibrator", + .pm = &msm_vibrator_pm_ops, + .of_match_table = of_match_ptr(msm_vibrator_of_match), + }, +}; +module_platform_driver(msm_vibrator_driver); + +MODULE_AUTHOR("Brian Masney <masneyb@onstation.org>"); +MODULE_DESCRIPTION("Qualcomm MSM vibrator driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/misc/soc_button_array.c b/drivers/input/misc/soc_button_array.c @@ -185,6 +185,10 @@ static int soc_button_parse_btn_desc(struct device *dev, info->name = "power"; info->event_code = KEY_POWER; info->wakeup = true; + } else if (upage == 0x01 && usage == 0xca) { + info->name = "rotation lock switch"; + info->event_type = EV_SW; + info->event_code = SW_ROTATE_LOCK; } else if (upage == 0x07 && usage == 0xe3) { info->name = "home"; info->event_code = KEY_LEFTMETA; @@ -373,7 +377,7 @@ static struct soc_button_info soc_button_PNP0C40[] = { { "home", 1, EV_KEY, KEY_LEFTMETA, false, true }, { "volume_up", 2, EV_KEY, KEY_VOLUMEUP, true, false }, { "volume_down", 3, EV_KEY, KEY_VOLUMEDOWN, true, false }, - { "rotation_lock", 4, EV_SW, SW_ROTATE_LOCK, false, false }, + { "rotation_lock", 4, EV_KEY, KEY_ROTATE_LOCK_TOGGLE, false, false }, { } }; diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c @@ -1337,6 +1337,7 @@ static const struct acpi_device_id elan_acpi_id[] = { { "ELAN0000", 0 }, { "ELAN0100", 0 }, { "ELAN0600", 0 }, + { "ELAN0601", 0 }, { "ELAN0602", 0 }, { "ELAN0605", 0 }, { "ELAN0608", 0 }, diff --git a/drivers/input/mouse/synaptics_i2c.c b/drivers/input/mouse/synaptics_i2c.c @@ -219,7 +219,6 @@ struct synaptics_i2c { struct i2c_client *client; struct input_dev *input; struct delayed_work dwork; - spinlock_t lock; int no_data_count; int no_decel_param; int reduce_report_param; @@ -369,23 +368,11 @@ static bool synaptics_i2c_get_input(struct synaptics_i2c *touch) return xy_delta || gesture; } -static void synaptics_i2c_reschedule_work(struct synaptics_i2c *touch, - unsigned long delay) -{ - unsigned long flags; - - spin_lock_irqsave(&touch->lock, flags); - - mod_delayed_work(system_wq, &touch->dwork, delay); - - spin_unlock_irqrestore(&touch->lock, flags); -} - static irqreturn_t synaptics_i2c_irq(int irq, void *dev_id) { struct synaptics_i2c *touch = dev_id; - synaptics_i2c_reschedule_work(touch, 0); + mod_delayed_work(system_wq, &touch->dwork, 0); return IRQ_HANDLED; } @@ -461,7 +448,7 @@ static void synaptics_i2c_work_handler(struct work_struct *work) * We poll the device once in THREAD_IRQ_SLEEP_SECS and * if error is detected, we try to reset and reconfigure the touchpad. */ - synaptics_i2c_reschedule_work(touch, delay); + mod_delayed_work(system_wq, &touch->dwork, delay); } static int synaptics_i2c_open(struct input_dev *input) @@ -474,7 +461,7 @@ static int synaptics_i2c_open(struct input_dev *input) return ret; if (polling_req) - synaptics_i2c_reschedule_work(touch, + mod_delayed_work(system_wq, &touch->dwork, msecs_to_jiffies(NO_DATA_SLEEP_MSECS)); return 0; @@ -530,7 +517,6 @@ static struct synaptics_i2c *synaptics_i2c_touch_create(struct i2c_client *clien touch->scan_rate_param = scan_rate; set_scan_rate(touch, scan_rate); INIT_DELAYED_WORK(&touch->dwork, synaptics_i2c_work_handler); - spin_lock_init(&touch->lock); return touch; } @@ -637,7 +623,7 @@ static int __maybe_unused synaptics_i2c_resume(struct device *dev) if (ret) return ret; - synaptics_i2c_reschedule_work(touch, + mod_delayed_work(system_wq, &touch->dwork, msecs_to_jiffies(NO_DATA_SLEEP_MSECS)); return 0; diff --git a/drivers/input/serio/i8042-sparcio.h b/drivers/input/serio/i8042-sparcio.h @@ -53,12 +53,11 @@ static struct resource *kbd_res; static int sparc_i8042_probe(struct platform_device *op) { - struct device_node *dp = op->dev.of_node; + struct device_node *dp; - dp = dp->child; - while (dp) { - if (!strcmp(dp->name, OBP_PS2KBD_NAME1) || - !strcmp(dp->name, OBP_PS2KBD_NAME2)) { + for_each_child_of_node(op->dev.of_node, dp) { + if (of_node_name_eq(dp, OBP_PS2KBD_NAME1) || + of_node_name_eq(dp, OBP_PS2KBD_NAME2)) { struct platform_device *kbd = of_find_device_by_node(dp); unsigned int irq = kbd->archdata.irqs[0]; if (irq == 0xffffffff) @@ -67,16 +66,14 @@ static int sparc_i8042_probe(struct platform_device *op) kbd_iobase = of_ioremap(&kbd->resource[0], 0, 8, "kbd"); kbd_res = &kbd->resource[0]; - } else if (!strcmp(dp->name, OBP_PS2MS_NAME1) || - !strcmp(dp->name, OBP_PS2MS_NAME2)) { + } else if (of_node_name_eq(dp, OBP_PS2MS_NAME1) || + of_node_name_eq(dp, OBP_PS2MS_NAME2)) { struct platform_device *ms = of_find_device_by_node(dp); unsigned int irq = ms->archdata.irqs[0]; if (irq == 0xffffffff) irq = op->archdata.irqs[0]; i8042_aux_irq = irq; } - - dp = dp->sibling; } return 0; @@ -109,8 +106,9 @@ static struct platform_driver sparc_i8042_driver = { static int __init i8042_platform_init(void) { struct device_node *root = of_find_node_by_path("/"); + const char *name = of_get_property(root, "name", NULL); - if (!strcmp(root->name, "SUNW,JavaStation-1")) { + if (name && !strcmp(name, "SUNW,JavaStation-1")) { /* Hardcoded values for MrCoffee. */ i8042_kbd_irq = i8042_aux_irq = 13 | 0x20; kbd_iobase = ioremap(0x71300060, 8); @@ -139,8 +137,9 @@ static int __init i8042_platform_init(void) static inline void i8042_platform_exit(void) { struct device_node *root = of_find_node_by_path("/"); + const char *name = of_get_property(root, "name", NULL); - if (strcmp(root->name, "SUNW,JavaStation-1")) + if (!name || strcmp(name, "SUNW,JavaStation-1")) platform_driver_unregister(&sparc_i8042_driver); } diff --git a/drivers/input/tablet/wacom_serial4.c b/drivers/input/tablet/wacom_serial4.c @@ -187,6 +187,7 @@ enum { MODEL_DIGITIZER_II = 0x5544, /* UD */ MODEL_GRAPHIRE = 0x4554, /* ET */ MODEL_PENPARTNER = 0x4354, /* CT */ + MODEL_ARTPAD_II = 0x4B54, /* KT */ }; static void wacom_handle_model_response(struct wacom *wacom) @@ -245,6 +246,7 @@ static void wacom_handle_model_response(struct wacom *wacom) wacom->flags = F_HAS_STYLUS2 | F_HAS_SCROLLWHEEL; break; + case MODEL_ARTPAD_II: case MODEL_DIGITIZER_II: wacom->dev->name = "Wacom Digitizer II"; wacom->dev->id.version = MODEL_DIGITIZER_II; diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig @@ -699,6 +699,7 @@ config TOUCHSCREEN_EDT_FT5X06 config TOUCHSCREEN_RASPBERRYPI_FW tristate "Raspberry Pi's firmware base touch screen support" depends on RASPBERRYPI_FIRMWARE || (RASPBERRYPI_FIRMWARE=n && COMPILE_TEST) + select INPUT_POLLDEV help Say Y here if you have the official Raspberry Pi 7 inch screen on your system. @@ -1168,11 +1169,11 @@ config TOUCHSCREEN_SIS_I2C module will be called sis_i2c. config TOUCHSCREEN_ST1232 - tristate "Sitronix ST1232 touchscreen controllers" + tristate "Sitronix ST1232 or ST1633 touchscreen controllers" depends on I2C help - Say Y here if you want to support Sitronix ST1232 - touchscreen controller. + Say Y here if you want to support the Sitronix ST1232 + or ST1633 touchscreen controller. If unsure, say N. diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c @@ -246,11 +246,14 @@ static void ad7879_timer(struct timer_list *t) static irqreturn_t ad7879_irq(int irq, void *handle) { struct ad7879 *ts = handle; + int error; - regmap_bulk_read(ts->regmap, AD7879_REG_XPLUS, - ts->conversion_data, AD7879_NR_SENSE); - - if (!ad7879_report(ts)) + error = regmap_bulk_read(ts->regmap, AD7879_REG_XPLUS, + ts->conversion_data, AD7879_NR_SENSE); + if (error) + dev_err_ratelimited(ts->dev, "failed to read %#02x: %d\n", + AD7879_REG_XPLUS, error); + else if (!ad7879_report(ts)) mod_timer(&ts->timer, jiffies + TS_PEN_UP_TIMEOUT); return IRQ_HANDLED; diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c @@ -31,6 +31,7 @@ #include <linux/interrupt.h> #include <linux/input.h> #include <linux/i2c.h> +#include <linux/kernel.h> #include <linux/uaccess.h> #include <linux/delay.h> #include <linux/debugfs.h> @@ -53,6 +54,11 @@ #define M09_REGISTER_NUM_X 0x94 #define M09_REGISTER_NUM_Y 0x95 +#define EV_REGISTER_THRESHOLD 0x40 +#define EV_REGISTER_GAIN 0x41 +#define EV_REGISTER_OFFSET_Y 0x45 +#define EV_REGISTER_OFFSET_X 0x46 + #define NO_REGISTER 0xff #define WORK_REGISTER_OPMODE 0x3c @@ -73,6 +79,7 @@ enum edt_ver { EDT_M06, EDT_M09, EDT_M12, + EV_FT, GENERIC_FT, }; @@ -81,6 +88,8 @@ struct edt_reg_addr { int reg_report_rate; int reg_gain; int reg_offset; + int reg_offset_x; + int reg_offset_y; int reg_num_x; int reg_num_y; }; @@ -106,6 +115,8 @@ struct edt_ft5x06_ts_data { int threshold; int gain; int offset; + int offset_x; + int offset_y; int report_rate; int max_support_points; @@ -190,6 +201,7 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id) case EDT_M09: case EDT_M12: + case EV_FT: case GENERIC_FT: cmd = 0x0; offset = 3; @@ -242,6 +254,10 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id) x = ((buf[0] << 8) | buf[1]) & 0x0fff; y = ((buf[2] << 8) | buf[3]) & 0x0fff; + /* The FT5x26 send the y coordinate first */ + if (tsdata->version == EV_FT) + swap(x, y); + id = (buf[2] >> 4) & 0x0f; down = type != TOUCH_EVENT_UP; @@ -275,8 +291,10 @@ static int edt_ft5x06_register_write(struct edt_ft5x06_ts_data *tsdata, wrbuf[3] = wrbuf[0] ^ wrbuf[1] ^ wrbuf[2]; return edt_ft5x06_ts_readwrite(tsdata->client, 4, wrbuf, 0, NULL); + /* fallthrough */ case EDT_M09: case EDT_M12: + case EV_FT: case GENERIC_FT: wrbuf[0] = addr; wrbuf[1] = value; @@ -315,8 +333,10 @@ static int edt_ft5x06_register_read(struct edt_ft5x06_ts_data *tsdata, } break; + /* fallthrough */ case EDT_M09: case EDT_M12: + case EV_FT: case GENERIC_FT: wrbuf[0] = addr; error = edt_ft5x06_ts_readwrite(tsdata->client, 1, @@ -339,9 +359,10 @@ struct edt_ft5x06_attribute { u8 limit_high; u8 addr_m06; u8 addr_m09; + u8 addr_ev; }; -#define EDT_ATTR(_field, _mode, _addr_m06, _addr_m09, \ +#define EDT_ATTR(_field, _mode, _addr_m06, _addr_m09, _addr_ev, \ _limit_low, _limit_high) \ struct edt_ft5x06_attribute edt_ft5x06_attr_##_field = { \ .dattr = __ATTR(_field, _mode, \ @@ -350,6 +371,7 @@ struct edt_ft5x06_attribute { .field_offset = offsetof(struct edt_ft5x06_ts_data, _field), \ .addr_m06 = _addr_m06, \ .addr_m09 = _addr_m09, \ + .addr_ev = _addr_ev, \ .limit_low = _limit_low, \ .limit_high = _limit_high, \ } @@ -386,6 +408,10 @@ static ssize_t edt_ft5x06_setting_show(struct device *dev, addr = attr->addr_m09; break; + case EV_FT: + addr = attr->addr_ev; + break; + default: error = -ENODEV; goto out; @@ -457,6 +483,10 @@ static ssize_t edt_ft5x06_setting_store(struct device *dev, addr = attr->addr_m09; break; + case EV_FT: + addr = attr->addr_ev; + break; + default: error = -ENODEV; goto out; @@ -480,20 +510,28 @@ out: /* m06, m09: range 0-31, m12: range 0-5 */ static EDT_ATTR(gain, S_IWUSR | S_IRUGO, WORK_REGISTER_GAIN, - M09_REGISTER_GAIN, 0, 31); + M09_REGISTER_GAIN, EV_REGISTER_GAIN, 0, 31); /* m06, m09: range 0-31, m12: range 0-16 */ static EDT_ATTR(offset, S_IWUSR | S_IRUGO, WORK_REGISTER_OFFSET, - M09_REGISTER_OFFSET, 0, 31); + M09_REGISTER_OFFSET, NO_REGISTER, 0, 31); +/* m06, m09, m12: no supported, ev_ft: range 0-80 */ +static EDT_ATTR(offset_x, S_IWUSR | S_IRUGO, NO_REGISTER, NO_REGISTER, + EV_REGISTER_OFFSET_X, 0, 80); +/* m06, m09, m12: no supported, ev_ft: range 0-80 */ +static EDT_ATTR(offset_y, S_IWUSR | S_IRUGO, NO_REGISTER, NO_REGISTER, + EV_REGISTER_OFFSET_Y, 0, 80); /* m06: range 20 to 80, m09: range 0 to 30, m12: range 1 to 255... */ static EDT_ATTR(threshold, S_IWUSR | S_IRUGO, WORK_REGISTER_THRESHOLD, - M09_REGISTER_THRESHOLD, 0, 255); + M09_REGISTER_THRESHOLD, EV_REGISTER_THRESHOLD, 0, 255); /* m06: range 3 to 14, m12: (0x64: 100Hz) */ static EDT_ATTR(report_rate, S_IWUSR | S_IRUGO, WORK_REGISTER_REPORT_RATE, - NO_REGISTER, 0, 255); + NO_REGISTER, NO_REGISTER, 0, 255); static struct attribute *edt_ft5x06_attrs[] = { &edt_ft5x06_attr_gain.dattr.attr, &edt_ft5x06_attr_offset.dattr.attr, + &edt_ft5x06_attr_offset_x.dattr.attr, + &edt_ft5x06_attr_offset_y.dattr.attr, &edt_ft5x06_attr_threshold.dattr.attr, &edt_ft5x06_attr_report_rate.dattr.attr, NULL @@ -605,8 +643,15 @@ static int edt_ft5x06_work_mode(struct edt_ft5x06_ts_data *tsdata) tsdata->threshold); edt_ft5x06_register_write(tsdata, reg_addr->reg_gain, tsdata->gain); - edt_ft5x06_register_write(tsdata, reg_addr->reg_offset, - tsdata->offset); + if (reg_addr->reg_offset != NO_REGISTER) + edt_ft5x06_register_write(tsdata, reg_addr->reg_offset, + tsdata->offset); + if (reg_addr->reg_offset_x != NO_REGISTER) + edt_ft5x06_register_write(tsdata, reg_addr->reg_offset_x, + tsdata->offset_x); + if (reg_addr->reg_offset_y != NO_REGISTER) + edt_ft5x06_register_write(tsdata, reg_addr->reg_offset_y, + tsdata->offset_y); if (reg_addr->reg_report_rate != NO_REGISTER) edt_ft5x06_register_write(tsdata, reg_addr->reg_report_rate, tsdata->report_rate); @@ -867,6 +912,16 @@ static int edt_ft5x06_ts_identify(struct i2c_client *client, case 0x5a: /* Solomon Goldentek Display */ snprintf(model_name, EDT_NAME_LEN, "GKTW50SCED1R0"); break; + case 0x59: /* Evervision Display with FT5xx6 TS */ + tsdata->version = EV_FT; + error = edt_ft5x06_ts_readwrite(client, 1, "\x53", + 1, rdbuf); + if (error) + return error; + strlcpy(fw_version, rdbuf, 1); + snprintf(model_name, EDT_NAME_LEN, + "EVERVISION-FT5726NEi"); + break; default: snprintf(model_name, EDT_NAME_LEN, "generic ft5x06 (%02x)", @@ -902,6 +957,18 @@ static void edt_ft5x06_ts_get_defaults(struct device *dev, edt_ft5x06_register_write(tsdata, reg_addr->reg_offset, val); tsdata->offset = val; } + + error = device_property_read_u32(dev, "offset-x", &val); + if (!error) { + edt_ft5x06_register_write(tsdata, reg_addr->reg_offset_x, val); + tsdata->offset_x = val; + } + + error = device_property_read_u32(dev, "offset-y", &val); + if (!error) { + edt_ft5x06_register_write(tsdata, reg_addr->reg_offset_y, val); + tsdata->offset_y = val; + } } static void @@ -912,7 +979,15 @@ edt_ft5x06_ts_get_parameters(struct edt_ft5x06_ts_data *tsdata) tsdata->threshold = edt_ft5x06_register_read(tsdata, reg_addr->reg_threshold); tsdata->gain = edt_ft5x06_register_read(tsdata, reg_addr->reg_gain); - tsdata->offset = edt_ft5x06_register_read(tsdata, reg_addr->reg_offset); + if (reg_addr->reg_offset != NO_REGISTER) + tsdata->offset = + edt_ft5x06_register_read(tsdata, reg_addr->reg_offset); + if (reg_addr->reg_offset_x != NO_REGISTER) + tsdata->offset_x = edt_ft5x06_register_read(tsdata, + reg_addr->reg_offset_x); + if (reg_addr->reg_offset_y != NO_REGISTER) + tsdata->offset_y = edt_ft5x06_register_read(tsdata, + reg_addr->reg_offset_y); if (reg_addr->reg_report_rate != NO_REGISTER) tsdata->report_rate = edt_ft5x06_register_read(tsdata, reg_addr->reg_report_rate); @@ -940,6 +1015,8 @@ edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata) reg_addr->reg_report_rate = WORK_REGISTER_REPORT_RATE; reg_addr->reg_gain = WORK_REGISTER_GAIN; reg_addr->reg_offset = WORK_REGISTER_OFFSET; + reg_addr->reg_offset_x = NO_REGISTER; + reg_addr->reg_offset_y = NO_REGISTER; reg_addr->reg_num_x = WORK_REGISTER_NUM_X; reg_addr->reg_num_y = WORK_REGISTER_NUM_Y; break; @@ -950,15 +1027,30 @@ edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata) reg_addr->reg_report_rate = NO_REGISTER; reg_addr->reg_gain = M09_REGISTER_GAIN; reg_addr->reg_offset = M09_REGISTER_OFFSET; + reg_addr->reg_offset_x = NO_REGISTER; + reg_addr->reg_offset_y = NO_REGISTER; reg_addr->reg_num_x = M09_REGISTER_NUM_X; reg_addr->reg_num_y = M09_REGISTER_NUM_Y; break; + case EV_FT: + reg_addr->reg_threshold = EV_REGISTER_THRESHOLD; + reg_addr->reg_gain = EV_REGISTER_GAIN; + reg_addr->reg_offset = NO_REGISTER; + reg_addr->reg_offset_x = EV_REGISTER_OFFSET_X; + reg_addr->reg_offset_y = EV_REGISTER_OFFSET_Y; + reg_addr->reg_num_x = NO_REGISTER; + reg_addr->reg_num_y = NO_REGISTER; + reg_addr->reg_report_rate = NO_REGISTER; + break; + case GENERIC_FT: /* this is a guesswork */ reg_addr->reg_threshold = M09_REGISTER_THRESHOLD; reg_addr->reg_gain = M09_REGISTER_GAIN; reg_addr->reg_offset = M09_REGISTER_OFFSET; + reg_addr->reg_offset_x = NO_REGISTER; + reg_addr->reg_offset_y = NO_REGISTER; break; } } @@ -1155,6 +1247,7 @@ static const struct edt_i2c_chip_data edt_ft6236_data = { static const struct i2c_device_id edt_ft5x06_ts_id[] = { { .name = "edt-ft5x06", .driver_data = (long)&edt_ft5x06_data }, { .name = "edt-ft5506", .driver_data = (long)&edt_ft5506_data }, + { .name = "ev-ft5726", .driver_data = (long)&edt_ft5506_data }, /* Note no edt- prefix for compatibility with the ft6236.c driver */ { .name = "ft6236", .driver_data = (long)&edt_ft6236_data }, { /* sentinel */ } @@ -1167,6 +1260,7 @@ static const struct of_device_id edt_ft5x06_of_match[] = { { .compatible = "edt,edt-ft5306", .data = &edt_ft5x06_data }, { .compatible = "edt,edt-ft5406", .data = &edt_ft5x06_data }, { .compatible = "edt,edt-ft5506", .data = &edt_ft5506_data }, + { .compatible = "evervision,ev-ft5726", .data = &edt_ft5506_data }, /* Note focaltech vendor prefix for compatibility with ft6236.c */ { .compatible = "focaltech,ft6236", .data = &edt_ft6236_data }, { /* sentinel */ } diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c @@ -216,6 +216,7 @@ static const struct goodix_chip_data *goodix_get_chip_data(u16 id) { switch (id) { case 1151: + case 5688: return &gt1x_chip_data; case 911: @@ -692,7 +693,9 @@ static int goodix_configure_dev(struct goodix_ts_data *ts) touchscreen_parse_properties(ts->input_dev, true, &ts->prop); if (!ts->prop.max_x || !ts->prop.max_y || !ts->max_touch_num) { - dev_err(&ts->client->dev, "Invalid config, using defaults\n"); + dev_err(&ts->client->dev, + "Invalid config (%d, %d, %d), using defaults\n", + ts->prop.max_x, ts->prop.max_y, ts->max_touch_num); ts->prop.max_x = GOODIX_MAX_WIDTH - 1; ts->prop.max_y = GOODIX_MAX_HEIGHT - 1; ts->max_touch_num = GOODIX_MAX_CONTACTS; @@ -942,6 +945,7 @@ MODULE_DEVICE_TABLE(acpi, goodix_acpi_match); #ifdef CONFIG_OF static const struct of_device_id goodix_of_match[] = { { .compatible = "goodix,gt1151" }, + { .compatible = "goodix,gt5688" }, { .compatible = "goodix,gt911" }, { .compatible = "goodix,gt9110" }, { .compatible = "goodix,gt912" }, diff --git a/drivers/input/touchscreen/ili210x.c b/drivers/input/touchscreen/ili210x.c @@ -4,11 +4,15 @@ #include <linux/slab.h> #include <linux/input.h> #include <linux/input/mt.h> +#include <linux/input/touchscreen.h> #include <linux/delay.h> #include <linux/workqueue.h> -#include <linux/input/ili210x.h> +#include <linux/gpio/consumer.h> +#include <linux/of_device.h> +#include <asm/unaligned.h> -#define MAX_TOUCHES 2 +#define ILI210X_TOUCHES 2 +#define ILI251X_TOUCHES 10 #define DEFAULT_POLL_PERIOD 20 /* Touchscreen commands */ @@ -17,41 +21,32 @@ #define REG_FIRMWARE_VERSION 0x40 #define REG_CALIBRATE 0xcc -struct finger { - u8 x_low; - u8 x_high; - u8 y_low; - u8 y_high; -} __packed; - -struct touchdata { - u8 status; - struct finger finger[MAX_TOUCHES]; -} __packed; - -struct panel_info { - struct finger finger_max; - u8 xchannel_num; - u8 ychannel_num; -} __packed; - struct firmware_version { u8 id; u8 major; u8 minor; } __packed; +enum ili2xxx_model { + MODEL_ILI210X, + MODEL_ILI251X, +}; + struct ili210x { struct i2c_client *client; struct input_dev *input; - bool (*get_pendown_state)(void); unsigned int poll_period; struct delayed_work dwork; + struct gpio_desc *reset_gpio; + struct touchscreen_properties prop; + enum ili2xxx_model model; + unsigned int max_touches; }; static int ili210x_read_reg(struct i2c_client *client, u8 reg, void *buf, size_t len) { + struct ili210x *priv = i2c_get_clientdata(client); struct i2c_msg msg[2] = { { .addr = client->addr, @@ -67,7 +62,38 @@ static int ili210x_read_reg(struct i2c_client *client, u8 reg, void *buf, } }; - if (i2c_transfer(client->adapter, msg, 2) != 2) { + if (priv->model == MODEL_ILI251X) { + if (i2c_transfer(client->adapter, msg, 1) != 1) { + dev_err(&client->dev, "i2c transfer failed\n"); + return -EIO; + } + + usleep_range(5000, 5500); + + if (i2c_transfer(client->adapter, msg + 1, 1) != 1) { + dev_err(&client->dev, "i2c transfer failed\n"); + return -EIO; + } + } else { + if (i2c_transfer(client->adapter, msg, 2) != 2) { + dev_err(&client->dev, "i2c transfer failed\n"); + return -EIO; + } + } + + return 0; +} + +static int ili210x_read(struct i2c_client *client, void *buf, size_t len) +{ + struct i2c_msg msg = { + .addr = client->addr, + .flags = I2C_M_RD, + .len = len, + .buf = buf, + }; + + if (i2c_transfer(client->adapter, &msg, 1) != 1) { dev_err(&client->dev, "i2c transfer failed\n"); return -EIO; } @@ -75,42 +101,72 @@ static int ili210x_read_reg(struct i2c_client *client, u8 reg, void *buf, return 0; } -static void ili210x_report_events(struct input_dev *input, - const struct touchdata *touchdata) +static bool ili210x_touchdata_to_coords(struct ili210x *priv, u8 *touchdata, + unsigned int finger, + unsigned int *x, unsigned int *y) { - int i; - bool touch; - unsigned int x, y; - const struct finger *finger; + if (finger >= ILI210X_TOUCHES) + return false; - for (i = 0; i < MAX_TOUCHES; i++) { - input_mt_slot(input, i); + if (touchdata[0] & BIT(finger)) + return false; - finger = &touchdata->finger[i]; + *x = get_unaligned_be16(touchdata + 1 + (finger * 4) + 0); + *y = get_unaligned_be16(touchdata + 1 + (finger * 4) + 2); - touch = touchdata->status & (1 << i); - input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); - if (touch) { - x = finger->x_low | (finger->x_high << 8); - y = finger->y_low | (finger->y_high << 8); + return true; +} + +static bool ili251x_touchdata_to_coords(struct ili210x *priv, u8 *touchdata, + unsigned int finger, + unsigned int *x, unsigned int *y) +{ + if (finger >= ILI251X_TOUCHES) + return false; + + *x = get_unaligned_be16(touchdata + 1 + (finger * 5) + 0); + if (!(*x & BIT(15))) /* Touch indication */ + return false; - input_report_abs(input, ABS_MT_POSITION_X, x); - input_report_abs(input, ABS_MT_POSITION_Y, y); + *x &= 0x3fff; + *y = get_unaligned_be16(touchdata + 1 + (finger * 5) + 2); + + return true; +} + +static bool ili210x_report_events(struct ili210x *priv, u8 *touchdata) +{ + struct input_dev *input = priv->input; + int i; + bool contact = false, touch = false; + unsigned int x = 0, y = 0; + + for (i = 0; i < priv->max_touches; i++) { + if (priv->model == MODEL_ILI210X) { + touch = ili210x_touchdata_to_coords(priv, touchdata, + i, &x, &y); + } else if (priv->model == MODEL_ILI251X) { + touch = ili251x_touchdata_to_coords(priv, touchdata, + i, &x, &y); + if (touch) + contact = true; } + + input_mt_slot(input, i); + input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); + if (!touch) + continue; + touchscreen_report_pos(input, &priv->prop, x, y, + true); } input_mt_report_pointer_emulation(input, false); input_sync(input); -} -static bool get_pendown_state(const struct ili210x *priv) -{ - bool state = false; - - if (priv->get_pendown_state) - state = priv->get_pendown_state(); + if (priv->model == MODEL_ILI210X) + contact = touchdata[0] & 0xf3; - return state; + return contact; } static void ili210x_work(struct work_struct *work) @@ -118,20 +174,29 @@ static void ili210x_work(struct work_struct *work) struct ili210x *priv = container_of(work, struct ili210x, dwork.work); struct i2c_client *client = priv->client; - struct touchdata touchdata; - int error; + u8 touchdata[64] = { 0 }; + bool touch; + int error = -EINVAL; + + if (priv->model == MODEL_ILI210X) { + error = ili210x_read_reg(client, REG_TOUCHDATA, + touchdata, sizeof(touchdata)); + } else if (priv->model == MODEL_ILI251X) { + error = ili210x_read_reg(client, REG_TOUCHDATA, + touchdata, 31); + if (!error && touchdata[0] == 2) + error = ili210x_read(client, &touchdata[31], 20); + } - error = ili210x_read_reg(client, REG_TOUCHDATA, - &touchdata, sizeof(touchdata)); if (error) { dev_err(&client->dev, "Unable to get touchdata, err = %d\n", error); return; } - ili210x_report_events(priv->input, &touchdata); + touch = ili210x_report_events(priv, touchdata); - if ((touchdata.status & 0xf3) || get_pendown_state(priv)) + if (touch) schedule_delayed_work(&priv->dwork, msecs_to_jiffies(priv->poll_period)); } @@ -180,103 +245,119 @@ static const struct attribute_group ili210x_attr_group = { .attrs = ili210x_attributes, }; +static void ili210x_power_down(void *data) +{ + struct gpio_desc *reset_gpio = data; + + gpiod_set_value_cansleep(reset_gpio, 1); +} + +static void ili210x_cancel_work(void *data) +{ + struct ili210x *priv = data; + + cancel_delayed_work_sync(&priv->dwork); +} + static int ili210x_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct device *dev = &client->dev; - const struct ili210x_platform_data *pdata = dev_get_platdata(dev); struct ili210x *priv; + struct gpio_desc *reset_gpio; struct input_dev *input; - struct panel_info panel; struct firmware_version firmware; - int xmax, ymax; + enum ili2xxx_model model; int error; - dev_dbg(dev, "Probing for ILI210X I2C Touschreen driver"); + model = (enum ili2xxx_model)id->driver_data; - if (!pdata) { - dev_err(dev, "No platform data!\n"); - return -EINVAL; - } + dev_dbg(dev, "Probing for ILI210X I2C Touschreen driver"); if (client->irq <= 0) { dev_err(dev, "No IRQ!\n"); return -EINVAL; } - /* Get firmware version */ - error = ili210x_read_reg(client, REG_FIRMWARE_VERSION, - &firmware, sizeof(firmware)); - if (error) { - dev_err(dev, "Failed to get firmware version, err: %d\n", - error); - return error; - } + reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(reset_gpio)) + return PTR_ERR(reset_gpio); - /* get panel info */ - error = ili210x_read_reg(client, REG_PANEL_INFO, &panel, sizeof(panel)); - if (error) { - dev_err(dev, "Failed to get panel information, err: %d\n", - error); - return error; + if (reset_gpio) { + error = devm_add_action_or_reset(dev, ili210x_power_down, + reset_gpio); + if (error) + return error; + + usleep_range(50, 100); + gpiod_set_value_cansleep(reset_gpio, 0); + msleep(100); } - xmax = panel.finger_max.x_low | (panel.finger_max.x_high << 8); - ymax = panel.finger_max.y_low | (panel.finger_max.y_high << 8); + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; - priv = kzalloc(sizeof(*priv), GFP_KERNEL); - input = input_allocate_device(); - if (!priv || !input) { - error = -ENOMEM; - goto err_free_mem; - } + input = devm_input_allocate_device(dev); + if (!input) + return -ENOMEM; priv->client = client; priv->input = input; - priv->get_pendown_state = pdata->get_pendown_state; - priv->poll_period = pdata->poll_period ? : DEFAULT_POLL_PERIOD; + priv->poll_period = DEFAULT_POLL_PERIOD; INIT_DELAYED_WORK(&priv->dwork, ili210x_work); + priv->reset_gpio = reset_gpio; + priv->model = model; + if (model == MODEL_ILI210X) + priv->max_touches = ILI210X_TOUCHES; + if (model == MODEL_ILI251X) + priv->max_touches = ILI251X_TOUCHES; + + i2c_set_clientdata(client, priv); + + /* Get firmware version */ + error = ili210x_read_reg(client, REG_FIRMWARE_VERSION, + &firmware, sizeof(firmware)); + if (error) { + dev_err(dev, "Failed to get firmware version, err: %d\n", + error); + return error; + } /* Setup input device */ input->name = "ILI210x Touchscreen"; input->id.bustype = BUS_I2C; input->dev.parent = dev; - __set_bit(EV_SYN, input->evbit); - __set_bit(EV_KEY, input->evbit); - __set_bit(EV_ABS, input->evbit); - __set_bit(BTN_TOUCH, input->keybit); - - /* Single touch */ - input_set_abs_params(input, ABS_X, 0, xmax, 0, 0); - input_set_abs_params(input, ABS_Y, 0, ymax, 0, 0); - /* Multi touch */ - input_mt_init_slots(input, MAX_TOUCHES, 0); - input_set_abs_params(input, ABS_MT_POSITION_X, 0, xmax, 0, 0); - input_set_abs_params(input, ABS_MT_POSITION_Y, 0, ymax, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_X, 0, 0xffff, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, 0xffff, 0, 0); + touchscreen_parse_properties(input, true, &priv->prop); + input_mt_init_slots(input, priv->max_touches, INPUT_MT_DIRECT); - i2c_set_clientdata(client, priv); + error = devm_add_action(dev, ili210x_cancel_work, priv); + if (error) + return error; - error = request_irq(client->irq, ili210x_irq, pdata->irq_flags, - client->name, priv); + error = devm_request_irq(dev, client->irq, ili210x_irq, 0, + client->name, priv); if (error) { dev_err(dev, "Unable to request touchscreen IRQ, err: %d\n", error); - goto err_free_mem; + return error; } - error = sysfs_create_group(&dev->kobj, &ili210x_attr_group); + error = devm_device_add_group(dev, &ili210x_attr_group); if (error) { dev_err(dev, "Unable to create sysfs attributes, err: %d\n", error); - goto err_free_irq; + return error; } error = input_register_device(priv->input); if (error) { dev_err(dev, "Cannot register input device, err: %d\n", error); - goto err_remove_sysfs; + return error; } device_init_wakeup(dev, 1); @@ -286,28 +367,6 @@ static int ili210x_i2c_probe(struct i2c_client *client, client->irq, firmware.id, firmware.major, firmware.minor); return 0; - -err_remove_sysfs: - sysfs_remove_group(&dev->kobj, &ili210x_attr_group); -err_free_irq: - free_irq(client->irq, priv); -err_free_mem: - input_free_device(input); - kfree(priv); - return error; -} - -static int ili210x_i2c_remove(struct i2c_client *client) -{ - struct ili210x *priv = i2c_get_clientdata(client); - - sysfs_remove_group(&client->dev.kobj, &ili210x_attr_group); - free_irq(priv->client->irq, priv); - cancel_delayed_work_sync(&priv->dwork); - input_unregister_device(priv->input); - kfree(priv); - - return 0; } static int __maybe_unused ili210x_i2c_suspend(struct device *dev) @@ -334,19 +393,27 @@ static SIMPLE_DEV_PM_OPS(ili210x_i2c_pm, ili210x_i2c_suspend, ili210x_i2c_resume); static const struct i2c_device_id ili210x_i2c_id[] = { - { "ili210x", 0 }, + { "ili210x", MODEL_ILI210X }, + { "ili251x", MODEL_ILI251X }, { } }; MODULE_DEVICE_TABLE(i2c, ili210x_i2c_id); +static const struct of_device_id ili210x_dt_ids[] = { + { .compatible = "ilitek,ili210x", .data = (void *)MODEL_ILI210X }, + { .compatible = "ilitek,ili251x", .data = (void *)MODEL_ILI251X }, + { }, +}; +MODULE_DEVICE_TABLE(of, ili210x_dt_ids); + static struct i2c_driver ili210x_ts_driver = { .driver = { .name = "ili210x_i2c", .pm = &ili210x_i2c_pm, + .of_match_table = ili210x_dt_ids, }, .id_table = ili210x_i2c_id, .probe = ili210x_i2c_probe, - .remove = ili210x_i2c_remove, }; module_i2c_driver(ili210x_ts_driver); diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c @@ -11,25 +11,19 @@ */ #include <linux/delay.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/i2c.h> #include <linux/input.h> #include <linux/interrupt.h> #include <linux/module.h> #include <linux/of.h> -#include <linux/of_gpio.h> #include <linux/pm_qos.h> #include <linux/slab.h> #include <linux/types.h> +#include <linux/input/touchscreen.h> #define ST1232_TS_NAME "st1232-ts" - -#define MIN_X 0x00 -#define MIN_Y 0x00 -#define MAX_X 0x31f /* (800 - 1) */ -#define MAX_Y 0x1df /* (480 - 1) */ -#define MAX_AREA 0xff -#define MAX_FINGERS 2 +#define ST1633_TS_NAME "st1633-ts" struct st1232_ts_finger { u16 x; @@ -38,12 +32,25 @@ struct st1232_ts_finger { bool is_valid; }; +struct st_chip_info { + bool have_z; + u16 max_x; + u16 max_y; + u16 max_area; + u16 max_fingers; + u8 start_reg; +}; + struct st1232_ts_data { struct i2c_client *client; struct input_dev *input_dev; - struct st1232_ts_finger finger[MAX_FINGERS]; + struct touchscreen_properties prop; struct dev_pm_qos_request low_latency_req; - int reset_gpio; + struct gpio_desc *reset_gpio; + const struct st_chip_info *chip_info; + int read_buf_len; + u8 *read_buf; + struct st1232_ts_finger *finger; }; static int st1232_ts_read_data(struct st1232_ts_data *ts) @@ -52,40 +59,35 @@ static int st1232_ts_read_data(struct st1232_ts_data *ts) struct i2c_client *client = ts->client; struct i2c_msg msg[2]; int error; - u8 start_reg; - u8 buf[10]; + int i, y; + u8 start_reg = ts->chip_info->start_reg; + u8 *buf = ts->read_buf; - /* read touchscreen data from ST1232 */ + /* read touchscreen data */ msg[0].addr = client->addr; msg[0].flags = 0; msg[0].len = 1; msg[0].buf = &start_reg; - start_reg = 0x10; msg[1].addr = ts->client->addr; msg[1].flags = I2C_M_RD; - msg[1].len = sizeof(buf); + msg[1].len = ts->read_buf_len; msg[1].buf = buf; error = i2c_transfer(client->adapter, msg, 2); if (error < 0) return error; - /* get "valid" bits */ - finger[0].is_valid = buf[2] >> 7; - finger[1].is_valid = buf[5] >> 7; + for (i = 0, y = 0; i < ts->chip_info->max_fingers; i++, y += 3) { + finger[i].is_valid = buf[i + y] >> 7; + if (finger[i].is_valid) { + finger[i].x = ((buf[i + y] & 0x0070) << 4) | buf[i + 1]; + finger[i].y = ((buf[i + y] & 0x0007) << 8) | buf[i + 2]; - /* get xy coordinate */ - if (finger[0].is_valid) { - finger[0].x = ((buf[2] & 0x0070) << 4) | buf[3]; - finger[0].y = ((buf[2] & 0x0007) << 8) | buf[4]; - finger[0].t = buf[8]; - } - - if (finger[1].is_valid) { - finger[1].x = ((buf[5] & 0x0070) << 4) | buf[6]; - finger[1].y = ((buf[5] & 0x0007) << 8) | buf[7]; - finger[1].t = buf[9]; + /* st1232 includes a z-axis / touch strength */ + if (ts->chip_info->have_z) + finger[i].t = buf[i + 6]; + } } return 0; @@ -104,13 +106,16 @@ static irqreturn_t st1232_ts_irq_handler(int irq, void *dev_id) goto end; /* multi touch protocol */ - for (i = 0; i < MAX_FINGERS; i++) { + for (i = 0; i < ts->chip_info->max_fingers; i++) { if (!finger[i].is_valid) continue; - input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, finger[i].t); - input_report_abs(input_dev, ABS_MT_POSITION_X, finger[i].x); - input_report_abs(input_dev, ABS_MT_POSITION_Y, finger[i].y); + if (ts->chip_info->have_z) + input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, + finger[i].t); + + touchscreen_report_pos(input_dev, &ts->prop, + finger[i].x, finger[i].y, true); input_mt_sync(input_dev); count++; } @@ -138,17 +143,45 @@ end: static void st1232_ts_power(struct st1232_ts_data *ts, bool poweron) { - if (gpio_is_valid(ts->reset_gpio)) - gpio_direction_output(ts->reset_gpio, poweron); + if (ts->reset_gpio) + gpiod_set_value_cansleep(ts->reset_gpio, !poweron); } +static const struct st_chip_info st1232_chip_info = { + .have_z = true, + .max_x = 0x31f, /* 800 - 1 */ + .max_y = 0x1df, /* 480 -1 */ + .max_area = 0xff, + .max_fingers = 2, + .start_reg = 0x12, +}; + +static const struct st_chip_info st1633_chip_info = { + .have_z = false, + .max_x = 0x13f, /* 320 - 1 */ + .max_y = 0x1df, /* 480 -1 */ + .max_area = 0x00, + .max_fingers = 5, + .start_reg = 0x12, +}; + static int st1232_ts_probe(struct i2c_client *client, const struct i2c_device_id *id) { + const struct st_chip_info *match; struct st1232_ts_data *ts; + struct st1232_ts_finger *finger; struct input_dev *input_dev; int error; + match = device_get_match_data(&client->dev); + if (!match && id) + match = (const void *)id->driver_data; + if (!match) { + dev_err(&client->dev, "unknown device model\n"); + return -ENODEV; + } + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { dev_err(&client->dev, "need I2C_FUNC_I2C\n"); return -EIO; @@ -163,6 +196,19 @@ static int st1232_ts_probe(struct i2c_client *client, if (!ts) return -ENOMEM; + ts->chip_info = match; + ts->finger = devm_kcalloc(&client->dev, + ts->chip_info->max_fingers, sizeof(*finger), + GFP_KERNEL); + if (!ts->finger) + return -ENOMEM; + + /* allocate a buffer according to the number of registers to read */ + ts->read_buf_len = ts->chip_info->max_fingers * 4; + ts->read_buf = devm_kzalloc(&client->dev, ts->read_buf_len, GFP_KERNEL); + if (!ts->read_buf) + return -ENOMEM; + input_dev = devm_input_allocate_device(&client->dev); if (!input_dev) return -ENOMEM; @@ -170,15 +216,13 @@ static int st1232_ts_probe(struct i2c_client *client, ts->client = client; ts->input_dev = input_dev; - ts->reset_gpio = of_get_gpio(client->dev.of_node, 0); - if (gpio_is_valid(ts->reset_gpio)) { - error = devm_gpio_request(&client->dev, ts->reset_gpio, NULL); - if (error) { - dev_err(&client->dev, - "Unable to request GPIO pin %d.\n", - ts->reset_gpio); - return error; - } + ts->reset_gpio = devm_gpiod_get_optional(&client->dev, NULL, + GPIOD_OUT_HIGH); + if (IS_ERR(ts->reset_gpio)) { + error = PTR_ERR(ts->reset_gpio); + dev_err(&client->dev, "Unable to request GPIO pin: %d.\n", + error); + return error; } st1232_ts_power(ts, true); @@ -192,9 +236,16 @@ static int st1232_ts_probe(struct i2c_client *client, __set_bit(EV_KEY, input_dev->evbit); __set_bit(EV_ABS, input_dev->evbit); - input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, MAX_AREA, 0, 0); - input_set_abs_params(input_dev, ABS_MT_POSITION_X, MIN_X, MAX_X, 0, 0); - input_set_abs_params(input_dev, ABS_MT_POSITION_Y, MIN_Y, MAX_Y, 0, 0); + if (ts->chip_info->have_z) + input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, + ts->chip_info->max_area, 0, 0); + + input_set_abs_params(input_dev, ABS_MT_POSITION_X, + 0, ts->chip_info->max_x, 0, 0); + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, + 0, ts->chip_info->max_y, 0, 0); + + touchscreen_parse_properties(input_dev, true, &ts->prop); error = devm_request_threaded_irq(&client->dev, client->irq, NULL, st1232_ts_irq_handler, @@ -261,13 +312,15 @@ static SIMPLE_DEV_PM_OPS(st1232_ts_pm_ops, st1232_ts_suspend, st1232_ts_resume); static const struct i2c_device_id st1232_ts_id[] = { - { ST1232_TS_NAME, 0 }, + { ST1232_TS_NAME, (unsigned long)&st1232_chip_info }, + { ST1633_TS_NAME, (unsigned long)&st1633_chip_info }, { } }; MODULE_DEVICE_TABLE(i2c, st1232_ts_id); static const struct of_device_id st1232_ts_dt_ids[] = { - { .compatible = "sitronix,st1232", }, + { .compatible = "sitronix,st1232", .data = &st1232_chip_info }, + { .compatible = "sitronix,st1633", .data = &st1633_chip_info }, { } }; MODULE_DEVICE_TABLE(of, st1232_ts_dt_ids); @@ -286,5 +339,6 @@ static struct i2c_driver st1232_ts_driver = { module_i2c_driver(st1232_ts_driver); MODULE_AUTHOR("Tony SIM <chinyeow.sim.xt@renesas.com>"); +MODULE_AUTHOR("Martin Kepplinger <martin.kepplinger@ginzinger.com>"); MODULE_DESCRIPTION("SITRONIX ST1232 Touchscreen Controller Driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/touchscreen/stmfts.c b/drivers/input/touchscreen/stmfts.c @@ -106,27 +106,29 @@ struct stmfts_data { bool running; }; -static void stmfts_brightness_set(struct led_classdev *led_cdev, +static int stmfts_brightness_set(struct led_classdev *led_cdev, enum led_brightness value) { struct stmfts_data *sdata = container_of(led_cdev, struct stmfts_data, led_cdev); int err; - if (value == sdata->led_status || !sdata->ledvdd) - return; - - if (!value) { - regulator_disable(sdata->ledvdd); - } else { - err = regulator_enable(sdata->ledvdd); - if (err) - dev_warn(&sdata->client->dev, - "failed to disable ledvdd regulator: %d\n", - err); + if (value != sdata->led_status && sdata->ledvdd) { + if (!value) { + regulator_disable(sdata->ledvdd); + } else { + err = regulator_enable(sdata->ledvdd); + if (err) { + dev_warn(&sdata->client->dev, + "failed to disable ledvdd regulator: %d\n", + err); + return err; + } + } + sdata->led_status = value; } - sdata->led_status = value; + return 0; } static enum led_brightness stmfts_brightness_get(struct led_classdev *led_cdev) @@ -608,7 +610,7 @@ static int stmfts_enable_led(struct stmfts_data *sdata) sdata->led_cdev.name = STMFTS_DEV_NAME; sdata->led_cdev.max_brightness = LED_ON; sdata->led_cdev.brightness = LED_OFF; - sdata->led_cdev.brightness_set = stmfts_brightness_set; + sdata->led_cdev.brightness_set_blocking = stmfts_brightness_set; sdata->led_cdev.brightness_get = stmfts_brightness_get; err = devm_led_classdev_register(&sdata->client->dev, &sdata->led_cdev); diff --git a/drivers/input/touchscreen/sx8654.c b/drivers/input/touchscreen/sx8654.c @@ -27,12 +27,16 @@ * published by the Free Software Foundation. */ -#include <linux/input.h> -#include <linux/module.h> -#include <linux/of.h> +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> #include <linux/i2c.h> +#include <linux/input.h> +#include <linux/input/touchscreen.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/module.h> +#include <linux/of.h> /* register addresses */ #define I2C_REG_TOUCH0 0x00 @@ -42,25 +46,28 @@ #define I2C_REG_IRQSRC 0x23 #define I2C_REG_SOFTRESET 0x3f +#define I2C_REG_SX8650_STAT 0x05 +#define SX8650_STAT_CONVIRQ BIT(7) + /* commands */ #define CMD_READ_REGISTER 0x40 -#define CMD_MANUAL 0xc0 #define CMD_PENTRG 0xe0 /* value for I2C_REG_SOFTRESET */ #define SOFTRESET_VALUE 0xde /* bits for I2C_REG_IRQSRC */ -#define IRQ_PENTOUCH_TOUCHCONVDONE 0x08 -#define IRQ_PENRELEASE 0x04 +#define IRQ_PENTOUCH_TOUCHCONVDONE BIT(3) +#define IRQ_PENRELEASE BIT(2) /* bits for RegTouch1 */ #define CONDIRQ 0x20 +#define RPDNT_100K 0x00 #define FILT_7SA 0x03 /* bits for I2C_REG_CHANMASK */ -#define CONV_X 0x80 -#define CONV_Y 0x40 +#define CONV_X BIT(7) +#define CONV_Y BIT(6) /* coordinates rate: higher nibble of CTRL0 register */ #define RATE_MANUAL 0x00 @@ -69,13 +76,122 @@ /* power delay: lower nibble of CTRL0 register */ #define POWDLY_1_1MS 0x0b +/* for sx8650, as we have no pen release IRQ there: timeout in ns following the + * last PENIRQ after which we assume the pen is lifted. + */ +#define SX8650_PENIRQ_TIMEOUT msecs_to_jiffies(10) + #define MAX_12BIT ((1 << 12) - 1) +#define MAX_I2C_READ_LEN 10 /* see datasheet section 5.1.5 */ + +/* channel definition */ +#define CH_X 0x00 +#define CH_Y 0x01 + +struct sx865x_data { + u8 cmd_manual; + u8 chan_mask; + bool has_irq_penrelease; + bool has_reg_irqmask; + irq_handler_t irqh; +}; struct sx8654 { struct input_dev *input; struct i2c_client *client; + struct gpio_desc *gpio_reset; + + spinlock_t lock; /* for input reporting from irq/timer */ + struct timer_list timer; + + struct touchscreen_properties props; + + const struct sx865x_data *data; }; +static inline void sx865x_penrelease(struct sx8654 *ts) +{ + struct input_dev *input_dev = ts->input; + + input_report_key(input_dev, BTN_TOUCH, 0); + input_sync(input_dev); +} + +static void sx865x_penrelease_timer_handler(struct timer_list *t) +{ + struct sx8654 *ts = from_timer(ts, t, timer); + unsigned long flags; + + spin_lock_irqsave(&ts->lock, flags); + sx865x_penrelease(ts); + spin_unlock_irqrestore(&ts->lock, flags); + dev_dbg(&ts->client->dev, "penrelease by timer\n"); +} + +static irqreturn_t sx8650_irq(int irq, void *handle) +{ + struct sx8654 *ts = handle; + struct device *dev = &ts->client->dev; + int len, i; + unsigned long flags; + u8 stat; + u16 x, y; + u16 ch; + u16 chdata; + __be16 data[MAX_I2C_READ_LEN / sizeof(__be16)]; + u8 nchan = hweight32(ts->data->chan_mask); + u8 readlen = nchan * sizeof(*data); + + stat = i2c_smbus_read_byte_data(ts->client, CMD_READ_REGISTER + | I2C_REG_SX8650_STAT); + + if (!(stat & SX8650_STAT_CONVIRQ)) { + dev_dbg(dev, "%s ignore stat [0x%02x]", __func__, stat); + return IRQ_HANDLED; + } + + len = i2c_master_recv(ts->client, (u8 *)data, readlen); + if (len != readlen) { + dev_dbg(dev, "ignore short recv (%d)\n", len); + return IRQ_HANDLED; + } + + spin_lock_irqsave(&ts->lock, flags); + + x = 0; + y = 0; + for (i = 0; i < nchan; i++) { + chdata = be16_to_cpu(data[i]); + + if (unlikely(chdata == 0xFFFF)) { + dev_dbg(dev, "invalid qualified data @ %d\n", i); + continue; + } else if (unlikely(chdata & 0x8000)) { + dev_warn(dev, "hibit @ %d [0x%04x]\n", i, chdata); + continue; + } + + ch = chdata >> 12; + if (ch == CH_X) + x = chdata & MAX_12BIT; + else if (ch == CH_Y) + y = chdata & MAX_12BIT; + else + dev_warn(dev, "unknown channel %d [0x%04x]\n", ch, + chdata); + } + + touchscreen_report_pos(ts->input, &ts->props, x, y, false); + input_report_key(ts->input, BTN_TOUCH, 1); + input_sync(ts->input); + dev_dbg(dev, "point(%4d,%4d)\n", x, y); + + mod_timer(&ts->timer, jiffies + SX8650_PENIRQ_TIMEOUT); + spin_unlock_irqrestore(&ts->lock, flags); + + return IRQ_HANDLED; +} + static irqreturn_t sx8654_irq(int irq, void *handle) { struct sx8654 *sx8654 = handle; @@ -112,8 +228,8 @@ static irqreturn_t sx8654_irq(int irq, void *handle) x = ((data[0] & 0xf) << 8) | (data[1]); y = ((data[2] & 0xf) << 8) | (data[3]); - input_report_abs(sx8654->input, ABS_X, x); - input_report_abs(sx8654->input, ABS_Y, y); + touchscreen_report_pos(sx8654->input, &sx8654->props, x, y, + false); input_report_key(sx8654->input, BTN_TOUCH, 1); input_sync(sx8654->input); @@ -124,6 +240,25 @@ out: return IRQ_HANDLED; } +static int sx8654_reset(struct sx8654 *ts) +{ + int err; + + if (ts->gpio_reset) { + gpiod_set_value_cansleep(ts->gpio_reset, 1); + udelay(2); /* Tpulse > 1µs */ + gpiod_set_value_cansleep(ts->gpio_reset, 0); + } else { + dev_dbg(&ts->client->dev, "NRST unavailable, try softreset\n"); + err = i2c_smbus_write_byte_data(ts->client, I2C_REG_SOFTRESET, + SOFTRESET_VALUE); + if (err) + return err; + } + + return 0; +} + static int sx8654_open(struct input_dev *dev) { struct sx8654 *sx8654 = input_get_drvdata(dev); @@ -157,14 +292,17 @@ static void sx8654_close(struct input_dev *dev) disable_irq(client->irq); + if (!sx8654->data->has_irq_penrelease) + del_timer_sync(&sx8654->timer); + /* enable manual mode mode */ - error = i2c_smbus_write_byte(client, CMD_MANUAL); + error = i2c_smbus_write_byte(client, sx8654->data->cmd_manual); if (error) { dev_err(&client->dev, "writing command CMD_MANUAL failed"); return; } - error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0, 0); + error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0, RATE_MANUAL); if (error) { dev_err(&client->dev, "writing to I2C_REG_TOUCH0 failed"); return; @@ -186,6 +324,31 @@ static int sx8654_probe(struct i2c_client *client, if (!sx8654) return -ENOMEM; + sx8654->gpio_reset = devm_gpiod_get_optional(&client->dev, "reset", + GPIOD_OUT_HIGH); + if (IS_ERR(sx8654->gpio_reset)) { + error = PTR_ERR(sx8654->gpio_reset); + if (error != -EPROBE_DEFER) + dev_err(&client->dev, "unable to get reset-gpio: %d\n", + error); + return error; + } + dev_dbg(&client->dev, "got GPIO reset pin\n"); + + sx8654->data = device_get_match_data(&client->dev); + if (!sx8654->data) + sx8654->data = (const struct sx865x_data *)id->driver_data; + if (!sx8654->data) { + dev_err(&client->dev, "invalid or missing device data\n"); + return -EINVAL; + } + + if (!sx8654->data->has_irq_penrelease) { + dev_dbg(&client->dev, "use timer for penrelease\n"); + timer_setup(&sx8654->timer, sx865x_penrelease_timer_handler, 0); + spin_lock_init(&sx8654->lock); + } + input = devm_input_allocate_device(&client->dev); if (!input) return -ENOMEM; @@ -201,43 +364,46 @@ static int sx8654_probe(struct i2c_client *client, input_set_abs_params(input, ABS_X, 0, MAX_12BIT, 0, 0); input_set_abs_params(input, ABS_Y, 0, MAX_12BIT, 0, 0); + touchscreen_parse_properties(input, false, &sx8654->props); + sx8654->client = client; sx8654->input = input; input_set_drvdata(sx8654->input, sx8654); - error = i2c_smbus_write_byte_data(client, I2C_REG_SOFTRESET, - SOFTRESET_VALUE); + error = sx8654_reset(sx8654); if (error) { - dev_err(&client->dev, "writing softreset value failed"); + dev_err(&client->dev, "reset failed"); return error; } error = i2c_smbus_write_byte_data(client, I2C_REG_CHANMASK, - CONV_X | CONV_Y); + sx8654->data->chan_mask); if (error) { dev_err(&client->dev, "writing to I2C_REG_CHANMASK failed"); return error; } - error = i2c_smbus_write_byte_data(client, I2C_REG_IRQMASK, - IRQ_PENTOUCH_TOUCHCONVDONE | - IRQ_PENRELEASE); - if (error) { - dev_err(&client->dev, "writing to I2C_REG_IRQMASK failed"); - return error; + if (sx8654->data->has_reg_irqmask) { + error = i2c_smbus_write_byte_data(client, I2C_REG_IRQMASK, + IRQ_PENTOUCH_TOUCHCONVDONE | + IRQ_PENRELEASE); + if (error) { + dev_err(&client->dev, "writing I2C_REG_IRQMASK failed"); + return error; + } } error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH1, - CONDIRQ | FILT_7SA); + CONDIRQ | RPDNT_100K | FILT_7SA); if (error) { dev_err(&client->dev, "writing to I2C_REG_TOUCH1 failed"); return error; } error = devm_request_threaded_irq(&client->dev, client->irq, - NULL, sx8654_irq, - IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + NULL, sx8654->data->irqh, + IRQF_ONESHOT, client->name, sx8654); if (error) { dev_err(&client->dev, @@ -256,17 +422,48 @@ static int sx8654_probe(struct i2c_client *client, return 0; } +static const struct sx865x_data sx8650_data = { + .cmd_manual = 0xb0, + .has_irq_penrelease = false, + .has_reg_irqmask = false, + .chan_mask = (CONV_X | CONV_Y), + .irqh = sx8650_irq, +}; + +static const struct sx865x_data sx8654_data = { + .cmd_manual = 0xc0, + .has_irq_penrelease = true, + .has_reg_irqmask = true, + .chan_mask = (CONV_X | CONV_Y), + .irqh = sx8654_irq, +}; + #ifdef CONFIG_OF static const struct of_device_id sx8654_of_match[] = { - { .compatible = "semtech,sx8654", }, - { }, + { + .compatible = "semtech,sx8650", + .data = &sx8650_data, + }, { + .compatible = "semtech,sx8654", + .data = &sx8654_data, + }, { + .compatible = "semtech,sx8655", + .data = &sx8654_data, + }, { + .compatible = "semtech,sx8656", + .data = &sx8654_data, + }, + { } }; MODULE_DEVICE_TABLE(of, sx8654_of_match); #endif static const struct i2c_device_id sx8654_id_table[] = { - { "semtech_sx8654", 0 }, - { }, + { .name = "semtech_sx8650", .driver_data = (long)&sx8650_data }, + { .name = "semtech_sx8654", .driver_data = (long)&sx8654_data }, + { .name = "semtech_sx8655", .driver_data = (long)&sx8654_data }, + { .name = "semtech_sx8656", .driver_data = (long)&sx8654_data }, + { } }; MODULE_DEVICE_TABLE(i2c, sx8654_id_table); diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c @@ -507,10 +507,8 @@ static int titsc_remove(struct platform_device *pdev) static int __maybe_unused titsc_suspend(struct device *dev) { struct titsc *ts_dev = dev_get_drvdata(dev); - struct ti_tscadc_dev *tscadc_dev; unsigned int idle; - tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev)); if (device_may_wakeup(dev)) { titsc_writel(ts_dev, REG_IRQSTATUS, TSC_IRQENB_MASK); idle = titsc_readl(ts_dev, REG_IRQENABLE); @@ -524,9 +522,7 @@ static int __maybe_unused titsc_suspend(struct device *dev) static int __maybe_unused titsc_resume(struct device *dev) { struct titsc *ts_dev = dev_get_drvdata(dev); - struct ti_tscadc_dev *tscadc_dev; - tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev)); if (device_may_wakeup(dev)) { titsc_writel(ts_dev, REG_IRQWAKEUP, 0x00); diff --git a/include/linux/input/ili210x.h b/include/linux/input/ili210x.h @@ -1,11 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ILI210X_H -#define _ILI210X_H - -struct ili210x_platform_data { - unsigned long irq_flags; - unsigned int poll_period; - bool (*get_pendown_state)(void); -}; - -#endif