whiterose

linux unikernel
Log | Files | Refs | README | LICENSE | git clone https://git.ne02ptzero.me/git/whiterose

commit 8d02a9a89729605c3026674e4a245839be98c913
parent 782492a7a4807317319a0b1832594d07ba79747d
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date:   Sat, 30 Mar 2019 10:26:36 -0700

Merge tag 'usb-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 5.1-rc3.

  Nothing major at all here, just a small collection of fixes for
  reported issues, and potential problems with error handling paths.
  Also a few new device ids, as normal.

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
  USB: serial: option: add Olicard 600
  USB: serial: cp210x: add new device id
  usb: u132-hcd: fix resource leak
  usb: cdc-acm: fix race during wakeup blocking TX traffic
  usb: mtu3: fix EXTCON dependency
  usb: usb251xb: fix to avoid potential NULL pointer dereference
  usb: core: Try generic PHY_MODE_USB_HOST if usb_phy_roothub_set_mode fails
  phy: sun4i-usb: Support set_mode to USB_HOST for non-OTG PHYs
  xhci: Don't let USB3 ports stuck in polling state prevent suspend
  usb: xhci: dbc: Don't free all memory with spinlock held
  xhci: Fix port resume done detection for SS ports with LPM enabled
  USB: serial: mos7720: fix mos_parport refcount imbalance on error path
  USB: gadget: f_hid: fix deadlock in f_hidg_write()
  usb: gadget: net2272: Fix net2272_dequeue()
  usb: gadget: net2280: Fix net2280_dequeue()
  usb: gadget: net2280: Fix overrun of OUT messages
  usb: dwc3: pci: add support for Comet Lake PCH ID
  usb: usb251xb: Remove unnecessary comparison of unsigned integer with >= 0
  usb: common: Consider only available nodes for dr_mode
  usb: typec: tcpm: Try PD-2.0 if sink does not respond to 3.0 source-caps
  ...

Diffstat:
Mdrivers/phy/allwinner/phy-sun4i-usb.c | 5++++-
Mdrivers/usb/class/cdc-acm.c | 4+---
Mdrivers/usb/common/common.c | 2++
Mdrivers/usb/core/hcd.c | 3+++
Mdrivers/usb/dwc3/dwc3-pci.c | 4++++
Mdrivers/usb/gadget/function/f_hid.c | 6+++---
Mdrivers/usb/gadget/udc/net2272.c | 1+
Mdrivers/usb/gadget/udc/net2280.c | 8+++-----
Mdrivers/usb/host/u132-hcd.c | 3+++
Mdrivers/usb/host/xhci-dbgcap.c | 5+++--
Mdrivers/usb/host/xhci-hub.c | 19++++++++++++-------
Mdrivers/usb/host/xhci-rcar.c | 1+
Mdrivers/usb/host/xhci-ring.c | 9++++++---
Mdrivers/usb/host/xhci.h | 8++++++++
Mdrivers/usb/misc/usb251xb.c | 4++--
Mdrivers/usb/mtu3/Kconfig | 1+
Mdrivers/usb/serial/cp210x.c | 1+
Mdrivers/usb/serial/ftdi_sio.c | 2++
Mdrivers/usb/serial/ftdi_sio_ids.h | 4+++-
Mdrivers/usb/serial/mos7720.c | 4++--
Mdrivers/usb/serial/option.c | 17++++++++++++-----
Mdrivers/usb/typec/tcpm/tcpm.c | 27++++++++++++++++++++++++++-
Mdrivers/usb/typec/tcpm/wcove.c | 9+++++++--
23 files changed, 110 insertions(+), 37 deletions(-)

diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c @@ -485,8 +485,11 @@ static int sun4i_usb_phy_set_mode(struct phy *_phy, struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy); int new_mode; - if (phy->index != 0) + if (phy->index != 0) { + if (mode == PHY_MODE_USB_HOST) + return 0; return -EINVAL; + } switch (mode) { case PHY_MODE_USB_HOST: diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c @@ -558,10 +558,8 @@ static void acm_softint(struct work_struct *work) clear_bit(EVENT_RX_STALL, &acm->flags); } - if (test_bit(EVENT_TTY_WAKEUP, &acm->flags)) { + if (test_and_clear_bit(EVENT_TTY_WAKEUP, &acm->flags)) tty_port_tty_wakeup(&acm->port); - clear_bit(EVENT_TTY_WAKEUP, &acm->flags); - } } /* diff --git a/drivers/usb/common/common.c b/drivers/usb/common/common.c @@ -145,6 +145,8 @@ enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *np, int arg0) do { controller = of_find_node_with_property(controller, "phys"); + if (!of_device_is_available(controller)) + continue; index = 0; do { if (arg0 == -1) { diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c @@ -2742,6 +2742,9 @@ int usb_add_hcd(struct usb_hcd *hcd, retval = usb_phy_roothub_set_mode(hcd->phy_roothub, PHY_MODE_USB_HOST_SS); if (retval) + retval = usb_phy_roothub_set_mode(hcd->phy_roothub, + PHY_MODE_USB_HOST); + if (retval) goto err_usb_phy_roothub_power_on; retval = usb_phy_roothub_power_on(hcd->phy_roothub); diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c @@ -29,6 +29,7 @@ #define PCI_DEVICE_ID_INTEL_BXT_M 0x1aaa #define PCI_DEVICE_ID_INTEL_APL 0x5aaa #define PCI_DEVICE_ID_INTEL_KBP 0xa2b0 +#define PCI_DEVICE_ID_INTEL_CMLH 0x02ee #define PCI_DEVICE_ID_INTEL_GLK 0x31aa #define PCI_DEVICE_ID_INTEL_CNPLP 0x9dee #define PCI_DEVICE_ID_INTEL_CNPH 0xa36e @@ -305,6 +306,9 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MRFLD), (kernel_ulong_t) &dwc3_pci_mrfld_properties, }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_CMLH), + (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_SPTLP), (kernel_ulong_t) &dwc3_pci_intel_properties, }, diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c @@ -391,20 +391,20 @@ try_again: req->complete = f_hidg_req_complete; req->context = hidg; + spin_unlock_irqrestore(&hidg->write_spinlock, flags); + status = usb_ep_queue(hidg->in_ep, req, GFP_ATOMIC); if (status < 0) { ERROR(hidg->func.config->cdev, "usb_ep_queue error on int endpoint %zd\n", status); - goto release_write_pending_unlocked; + goto release_write_pending; } else { status = count; } - spin_unlock_irqrestore(&hidg->write_spinlock, flags); return status; release_write_pending: spin_lock_irqsave(&hidg->write_spinlock, flags); -release_write_pending_unlocked: hidg->write_pending = 0; spin_unlock_irqrestore(&hidg->write_spinlock, flags); diff --git a/drivers/usb/gadget/udc/net2272.c b/drivers/usb/gadget/udc/net2272.c @@ -945,6 +945,7 @@ net2272_dequeue(struct usb_ep *_ep, struct usb_request *_req) break; } if (&req->req != _req) { + ep->stopped = stopped; spin_unlock_irqrestore(&ep->dev->lock, flags); return -EINVAL; } diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c @@ -866,9 +866,6 @@ static void start_queue(struct net2280_ep *ep, u32 dmactl, u32 td_dma) (void) readl(&ep->dev->pci->pcimstctl); writel(BIT(DMA_START), &dma->dmastat); - - if (!ep->is_in) - stop_out_naking(ep); } static void start_dma(struct net2280_ep *ep, struct net2280_request *req) @@ -907,6 +904,7 @@ static void start_dma(struct net2280_ep *ep, struct net2280_request *req) writel(BIT(DMA_START), &dma->dmastat); return; } + stop_out_naking(ep); } tmp = dmactl_default; @@ -1275,9 +1273,9 @@ static int net2280_dequeue(struct usb_ep *_ep, struct usb_request *_req) break; } if (&req->req != _req) { + ep->stopped = stopped; spin_unlock_irqrestore(&ep->dev->lock, flags); - dev_err(&ep->dev->pdev->dev, "%s: Request mismatch\n", - __func__); + ep_dbg(ep->dev, "%s: Request mismatch\n", __func__); return -EINVAL; } diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c @@ -3204,6 +3204,9 @@ static int __init u132_hcd_init(void) printk(KERN_INFO "driver %s\n", hcd_name); workqueue = create_singlethread_workqueue("u132"); retval = platform_driver_register(&u132_platform_driver); + if (retval) + destroy_workqueue(workqueue); + return retval; } diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c @@ -516,7 +516,6 @@ static int xhci_do_dbc_stop(struct xhci_hcd *xhci) return -1; writel(0, &dbc->regs->control); - xhci_dbc_mem_cleanup(xhci); dbc->state = DS_DISABLED; return 0; @@ -562,8 +561,10 @@ static void xhci_dbc_stop(struct xhci_hcd *xhci) ret = xhci_do_dbc_stop(xhci); spin_unlock_irqrestore(&dbc->lock, flags); - if (!ret) + if (!ret) { + xhci_dbc_mem_cleanup(xhci); pm_runtime_put_sync(xhci_to_hcd(xhci)->self.controller); + } } static void diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c @@ -1545,20 +1545,25 @@ int xhci_bus_suspend(struct usb_hcd *hcd) port_index = max_ports; while (port_index--) { u32 t1, t2; - + int retries = 10; +retry: t1 = readl(ports[port_index]->addr); t2 = xhci_port_state_to_neutral(t1); portsc_buf[port_index] = 0; - /* Bail out if a USB3 port has a new device in link training */ - if ((hcd->speed >= HCD_USB3) && + /* + * Give a USB3 port in link training time to finish, but don't + * prevent suspend as port might be stuck + */ + if ((hcd->speed >= HCD_USB3) && retries-- && (t1 & PORT_PLS_MASK) == XDEV_POLLING) { - bus_state->bus_suspended = 0; spin_unlock_irqrestore(&xhci->lock, flags); - xhci_dbg(xhci, "Bus suspend bailout, port in polling\n"); - return -EBUSY; + msleep(XHCI_PORT_POLLING_LFPS_TIME); + spin_lock_irqsave(&xhci->lock, flags); + xhci_dbg(xhci, "port %d polling in bus suspend, waiting\n", + port_index); + goto retry; } - /* suspend ports in U0, or bail out for new connect changes */ if ((t1 & PORT_PE) && (t1 & PORT_PLS_MASK) == XDEV_U0) { if ((t1 & PORT_CSC) && wake_enabled) { diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c @@ -246,6 +246,7 @@ int xhci_rcar_init_quirk(struct usb_hcd *hcd) if (!xhci_rcar_wait_for_pll_active(hcd)) return -ETIMEDOUT; + xhci->quirks |= XHCI_TRUST_TX_LENGTH; return xhci_rcar_download_firmware(hcd); } diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c @@ -1647,10 +1647,13 @@ static void handle_port_status(struct xhci_hcd *xhci, } } - if ((portsc & PORT_PLC) && (portsc & PORT_PLS_MASK) == XDEV_U0 && - DEV_SUPERSPEED_ANY(portsc)) { + if ((portsc & PORT_PLC) && + DEV_SUPERSPEED_ANY(portsc) && + ((portsc & PORT_PLS_MASK) == XDEV_U0 || + (portsc & PORT_PLS_MASK) == XDEV_U1 || + (portsc & PORT_PLS_MASK) == XDEV_U2)) { xhci_dbg(xhci, "resume SS port %d finished\n", port_id); - /* We've just brought the device into U0 through either the + /* We've just brought the device into U0/1/2 through either the * Resume state after a device remote wakeup, or through the * U3Exit state after a host-initiated resume. If it's a device * initiated remote wake, don't pass up the link state change, diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h @@ -452,6 +452,14 @@ struct xhci_op_regs { */ #define XHCI_DEFAULT_BESL 4 +/* + * USB3 specification define a 360ms tPollingLFPSTiemout for USB3 ports + * to complete link training. usually link trainig completes much faster + * so check status 10 times with 36ms sleep in places we need to wait for + * polling to complete. + */ +#define XHCI_PORT_POLLING_LFPS_TIME 36 + /** * struct xhci_intr_reg - Interrupt Register Set * @irq_pending: IMAN - Interrupt Management Register. Used to enable diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c @@ -547,7 +547,7 @@ static int usb251xb_get_ofdata(struct usb251xb *hub, */ hub->port_swap = USB251XB_DEF_PORT_SWAP; of_property_for_each_u32(np, "swap-dx-lanes", prop, p, port) { - if ((port >= 0) && (port <= data->port_cnt)) + if (port <= data->port_cnt) hub->port_swap |= BIT(port); } @@ -612,7 +612,7 @@ static int usb251xb_probe(struct usb251xb *hub) dev); int err; - if (np) { + if (np && of_id) { err = usb251xb_get_ofdata(hub, (struct usb251xb_data *)of_id->data); if (err) { diff --git a/drivers/usb/mtu3/Kconfig b/drivers/usb/mtu3/Kconfig @@ -6,6 +6,7 @@ config USB_MTU3 tristate "MediaTek USB3 Dual Role controller" depends on USB || USB_GADGET depends on ARCH_MEDIATEK || COMPILE_TEST + depends on EXTCON || !EXTCON select USB_XHCI_MTK if USB_SUPPORT && USB_XHCI_HCD help Say Y or M here if your system runs on MediaTek SoCs with diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c @@ -80,6 +80,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x804E) }, /* Software Bisque Paramount ME build-in converter */ { USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */ { USB_DEVICE(0x10C4, 0x8054) }, /* Enfora GSM2228 */ + { USB_DEVICE(0x10C4, 0x8056) }, /* Lorenz Messtechnik devices */ { USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */ { USB_DEVICE(0x10C4, 0x806F) }, /* IMS USB to RS422 Converter Cable */ { USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */ diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c @@ -609,6 +609,8 @@ static const struct usb_device_id id_table_combined[] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(FTDI_VID, FTDI_NT_ORIONLXM_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, FTDI_NT_ORIONLX_PLUS_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_NT_ORION_IO_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SYNAPSE_SS200_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX2_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h @@ -567,7 +567,9 @@ /* * NovaTech product ids (FTDI_VID) */ -#define FTDI_NT_ORIONLXM_PID 0x7c90 /* OrionLXm Substation Automation Platform */ +#define FTDI_NT_ORIONLXM_PID 0x7c90 /* OrionLXm Substation Automation Platform */ +#define FTDI_NT_ORIONLX_PLUS_PID 0x7c91 /* OrionLX+ Substation Automation Platform */ +#define FTDI_NT_ORION_IO_PID 0x7c92 /* Orion I/O */ /* * Synapse Wireless product ids (FTDI_VID) diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c @@ -366,8 +366,6 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport, if (!urbtrack) return -ENOMEM; - kref_get(&mos_parport->ref_count); - urbtrack->mos_parport = mos_parport; urbtrack->urb = usb_alloc_urb(0, GFP_ATOMIC); if (!urbtrack->urb) { kfree(urbtrack); @@ -388,6 +386,8 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport, usb_sndctrlpipe(usbdev, 0), (unsigned char *)urbtrack->setup, NULL, 0, async_complete, urbtrack); + kref_get(&mos_parport->ref_count); + urbtrack->mos_parport = mos_parport; kref_init(&urbtrack->ref_count); INIT_LIST_HEAD(&urbtrack->urblist_entry); diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c @@ -246,6 +246,7 @@ static void option_instat_callback(struct urb *urb); #define QUECTEL_PRODUCT_EC25 0x0125 #define QUECTEL_PRODUCT_BG96 0x0296 #define QUECTEL_PRODUCT_EP06 0x0306 +#define QUECTEL_PRODUCT_EM12 0x0512 #define CMOTECH_VENDOR_ID 0x16d8 #define CMOTECH_PRODUCT_6001 0x6001 @@ -1066,7 +1067,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(3) }, { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */ - { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */ + { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000), /* SIMCom SIM5218 */ + .driver_info = NCTRL(0) | NCTRL(1) | NCTRL(2) | NCTRL(3) | RSVD(4) }, /* Quectel products using Qualcomm vendor ID */ { USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC15)}, { USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC20), @@ -1087,6 +1089,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff), .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0xff, 0xff), + .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003), @@ -1940,10 +1945,12 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(4) }, { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e35, 0xff), /* D-Link DWM-222 */ .driver_info = RSVD(4) }, - { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */ - { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */ - { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x7e11, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/A3 */ - { USB_DEVICE_INTERFACE_CLASS(0x2020, 0x4000, 0xff) }, /* OLICARD300 - MT6225 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x7e11, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/A3 */ + { USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2031, 0xff), /* Olicard 600 */ + .driver_info = RSVD(4) }, + { USB_DEVICE_INTERFACE_CLASS(0x2020, 0x4000, 0xff) }, /* OLICARD300 - MT6225 */ { USB_DEVICE(INOVIA_VENDOR_ID, INOVIA_SEW858) }, { USB_DEVICE(VIATELECOM_VENDOR_ID, VIATELECOM_PRODUCT_CDS7) }, { USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD200, 0xff, 0xff, 0xff) }, diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c @@ -37,6 +37,7 @@ S(SRC_ATTACHED), \ S(SRC_STARTUP), \ S(SRC_SEND_CAPABILITIES), \ + S(SRC_SEND_CAPABILITIES_TIMEOUT), \ S(SRC_NEGOTIATE_CAPABILITIES), \ S(SRC_TRANSITION_SUPPLY), \ S(SRC_READY), \ @@ -2966,10 +2967,34 @@ static void run_state_machine(struct tcpm_port *port) /* port->hard_reset_count = 0; */ port->caps_count = 0; port->pd_capable = true; - tcpm_set_state_cond(port, hard_reset_state(port), + tcpm_set_state_cond(port, SRC_SEND_CAPABILITIES_TIMEOUT, PD_T_SEND_SOURCE_CAP); } break; + case SRC_SEND_CAPABILITIES_TIMEOUT: + /* + * Error recovery for a PD_DATA_SOURCE_CAP reply timeout. + * + * PD 2.0 sinks are supposed to accept src-capabilities with a + * 3.0 header and simply ignore any src PDOs which the sink does + * not understand such as PPS but some 2.0 sinks instead ignore + * the entire PD_DATA_SOURCE_CAP message, causing contract + * negotiation to fail. + * + * After PD_N_HARD_RESET_COUNT hard-reset attempts, we try + * sending src-capabilities with a lower PD revision to + * make these broken sinks work. + */ + if (port->hard_reset_count < PD_N_HARD_RESET_COUNT) { + tcpm_set_state(port, HARD_RESET_SEND, 0); + } else if (port->negotiated_rev > PD_REV20) { + port->negotiated_rev--; + port->hard_reset_count = 0; + tcpm_set_state(port, SRC_SEND_CAPABILITIES, 0); + } else { + tcpm_set_state(port, hard_reset_state(port), 0); + } + break; case SRC_NEGOTIATE_CAPABILITIES: ret = tcpm_pd_check_request(port); if (ret < 0) { diff --git a/drivers/usb/typec/tcpm/wcove.c b/drivers/usb/typec/tcpm/wcove.c @@ -615,8 +615,13 @@ static int wcove_typec_probe(struct platform_device *pdev) wcove->dev = &pdev->dev; wcove->regmap = pmic->regmap; - irq = regmap_irq_get_virq(pmic->irq_chip_data_chgr, - platform_get_irq(pdev, 0)); + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "Failed to get IRQ: %d\n", irq); + return irq; + } + + irq = regmap_irq_get_virq(pmic->irq_chip_data_chgr, irq); if (irq < 0) return irq;