whiterose

linux unikernel
Log | Files | Refs | README | LICENSE | git clone https://git.ne02ptzero.me/git/whiterose

commit 93335e5911dbffccd3b74c4d214268c0fd2bc1b0
parent c38239b4be1ac7e4bcf5bbd971353bae51525b8f
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date:   Mon, 29 Oct 2018 15:05:20 -0700

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree updates from Arnd Bergmann:
 "There are close to 800 indivudal changesets in this branch again,
  which feels like a lot. There are particularly many changes for the
  NVIDIA Tegra platform this time, in fact more than it has seen in the
  two years since the v4.9 merge window. Aside from this, it's been
  fairly normal, with lots of changes going into Renesas R-CAR, NXP
  i.MX, Allwinner Sunxi, Samsung Exynos, and TI OMAP.

  Most of the changes are for adding new features into existing boards,
  for brevity I'm only mentioning completely new machines and SoCs here.
  For the first time I think we have (slightly) more new 64-bit hardware
  than 32-bit:

  Two boards get added for TI OMAP: Moxa UC-2101 is an industrial
  computer, see https://www.moxa.com/product/UC-2100.htm; GTA04A5 is a
  minor variation of the motherboards of the GTA04 phone, see
  https://shop.goldelico.com/wiki.php?page=GTA04A5

  Clearfog is a nice little board for quad-core Marvell Armada 8040
  network processor, see
  https://www.solid-run.com/marvell-armada-family/clearfog-gt-8k/

  Two additional server boards come with the Aspeed baseboard management
  controllers: Stardragon4800 is an arm64 reference platform made by HXT
  (based on Qualcomm's server chips), and TiogaPass is an Open Compute
  mainboard with x86 CPUs. Both use the ARM11 based AST2500 chips in the
  BMC.

  NXP i.MX usually sees a lot of new boards each release. This time
  there we only add one minor variant: ConnectCore 6UL SBC Pro uses the
  same SoM design as the ConnectCore 6UL SBC Express added later.
  However, there is a new chip, the i.MX6ULZ, which is an even smaller
  variant of the i.MX6ULL, with features removed. There is also support
  for the reference board design, the i.MX6ULZ 14x14 EVK.

  A new Raspberry Pi variant gets added, this one is the CM3 compute
  module based on bcm2837, it was launched in early 2017 but only now
  added to the kernel, both as 32-bit and as 64-bit files, as we tend to
  do for Raspberry Pi.

  On the Allwinner side, everything is again about cheap development
  boards, usually of the "Fruit Pi" variety. The new ones this time are:
   - Orange Pi Zero Plus2: http://www.orangepi.org/OrangePiZeroPlus2/
   - Orange Pi One Plus: http://www.orangepi.org/OrangePiOneplus/
   - Pine64 LTS: https://www.pine64.org/?product=pine-a64-lts
   - Banana Pi M2+ H5: http://www.banana-pi.org/m2plus.html
  The last one of these is now a 64-bit version of the earlier Banana Pi
  M2+ H3, with the same board layout.

  Similarly, for Rockchips, get get another variant of the 32-bit Asus
  Tinker board, the model 'S' based on rk3288, and three now boards
  based on the popular RK3399 chip:
   - ROC-RK3399-PC: https://libre.computer/products/boards/roc-rk3399-pc/
   - Rock960: https://www.96boards.org/product/rock960/
   - RockPro64: https://www.pine64.org/?page_id=61454
  These are all quite powerful boards with lots of RAM and I/O, and the
  RK3399 is the same chip used in several Chromebooks. Finally, we get
  support for the PX30 (aka rk3326) chip, which is based on the low-end
  64-bit Cortex-A35 CPU core. So far, only the evaluation board is
  supported.

  One more Banana Pi is added with a Mediatek chip: Banana Pi R64 is
  based on the MT7622 WiFi router platform, and the first product I've
  seen with a 64-bit Mediatek chip in that market:
  http://www.banana-pi.org/r64.html

  For HiSilicon, we gain support for the Hi3670 SoC and HiKey 370
  development board, which are similar to the Hi3660 and Hikey 360
  respectively, but add support for an NPU.

  Amlogic gets initial support for the Meson-G12A chip (S905D2), another
  quad-core Cortex-A53 SoC, and its evaluation platform. On the 32-bit
  side, we gain support for an actual end-user product, the Endless
  Computers Endless Mini based on Meson8b (S805), see
  https://endlessos.com/computers/

  Qualcomm adds support for their MSM8998 SoC and evaluation platform.
  This chip is commonly known as the Snapdragon 835, and is used in
  high-end phones as well as low-end laptops.

  For Renesas, a very bare support for the r8a774a1 (RZ/G2M) is added,
  but no boards for this one. However, we do add boards for the
  previously added r8a77965 (R-Car M3-N): the M3NULCB Kingfisher and the
  M3NULCB Starter Kit Pro.

  While we have lots of DT changes for NVIDIA to update the existing
  files, the only board that gets added is the Toradex Colibri T20 on
  Colibri Evaluation Board for the old Tegra2.

  Synaptics add support for their AS370 SoC, which is part of the
  (formerly Marvell) Berlin line of set-top-box chips used e.g. in the
  various Google Chromecast. Only the .dtsi gets added at this point, no
  actual machines"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (721 commits)
  ARM: dts: socfgpa: remove ethernet aliases from dtsi
  arm64: dts: stratix10: add ethernet aliases
  dt-bindings: mediatek: Add bindig for MT7623 IOMMU and SMI
  dt-bindings: mediatek: Add JPEG Decoder binding for MT7623
  dt-bindings: iommu: mediatek: Add binding for MT7623
  dt-bindings: clock: mediatek: add support for MT7623
  ARM: dts: mvebu: armada-385-db-88f6820-amc: auto-detect nand ECC properites
  ARM: dts: da850-lego-ev3: slow down A/DC as much as possible
  ARM: dts: da850-evm: Enable tca6416 on baseboard
  arm64: dts: uniphier: Add USB2 PHY nodes
  arm64: dts: uniphier: Add USB3 controller nodes
  ARM: dts: uniphier: Add USB2 PHY nodes
  ARM: dts: uniphier: Add USB3 controller nodes
  arm64: dts: meson-axg: s400: disable emmc
  arm64: dts: meson-axg: s400: add missing emmc pwrseq
  arm64: dts: clearfog-gt-8k: add PCIe slot description
  ARM: dts: at91: sama5d4_xplained: even nand memory partitions
  ARM: dts: at91: sama5d3_xplained: even nand memory partitions
  ARM: dts: at91: at91sam9x5cm: even nand memory partitions
  ARM: dts: at91: sama5d2_ptc_ek: fix bootloader env offsets
  ...

Diffstat:
MDocumentation/arm/Samsung/Bootloader-interface.txt | 1+
MDocumentation/devicetree/bindings/arm/amlogic.txt | 7+++++++
MDocumentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt | 8++++++++
MDocumentation/devicetree/bindings/arm/fsl.txt | 44++++++++++++++++++++++++++++++++++++++++++++
MDocumentation/devicetree/bindings/arm/hisilicon/hisilicon.txt | 8++++++++
DDocumentation/devicetree/bindings/arm/marvell/marvell,berlin.txt | 96-------------------------------------------------------------------------------
MDocumentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt | 1+
MDocumentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt | 1+
MDocumentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt | 1+
MDocumentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt | 1+
MDocumentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt | 1+
MDocumentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt | 1+
MDocumentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt | 1+
MDocumentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt | 1+
MDocumentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt | 1+
MDocumentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt | 1+
MDocumentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt | 1+
MDocumentation/devicetree/bindings/arm/rockchip.txt | 20++++++++++++++++++++
MDocumentation/devicetree/bindings/arm/scu.txt | 2+-
MDocumentation/devicetree/bindings/arm/shmobile.txt | 16++++++++++++----
ADocumentation/devicetree/bindings/arm/syna.txt | 105+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
MDocumentation/devicetree/bindings/arm/tegra.txt | 9+++++++--
MDocumentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt | 93+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
MDocumentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt | 103+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
MDocumentation/devicetree/bindings/arm/ux500/boards.txt | 2+-
MDocumentation/devicetree/bindings/clock/imx6q-clock.txt | 8++++++++
MDocumentation/devicetree/bindings/iommu/mediatek,iommu.txt | 4+++-
MDocumentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt | 1+
MDocumentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt | 1+
MDocumentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt | 3++-
MDocumentation/devicetree/bindings/net/dsa/b53.txt | 36++++++++++++++++++++++++++++++++++++
MDocumentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt | 1+
MDocumentation/devicetree/bindings/power/actions,owl-sps.txt | 2++
MDocumentation/devicetree/bindings/soc/rockchip/grf.txt | 2++
MDocumentation/devicetree/bindings/usb/dwc2.txt | 1+
MDocumentation/devicetree/bindings/vendor-prefixes.txt | 2++
March/arm/boot/dts/Makefile | 18++++++++++++++++--
March/arm/boot/dts/am335x-bone-common.dtsi | 6+++++-
March/arm/boot/dts/am335x-boneblack-common.dtsi | 5++++-
March/arm/boot/dts/am335x-chiliboard.dts | 6+++++-
March/arm/boot/dts/am335x-cm-t335.dts | 6+++++-
March/arm/boot/dts/am335x-evm.dts | 12++++++------
March/arm/boot/dts/am335x-evmsk.dts | 12++++++++++--
March/arm/boot/dts/am335x-igep0033.dtsi | 13+++++++++++--
March/arm/boot/dts/am335x-lxm.dts | 12++++++++++--
Aarch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi | 249+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Aarch/arm/boot/dts/am335x-moxa-uc-2101.dts | 69+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts | 12++++++++++--
March/arm/boot/dts/am335x-nano.dts | 12++++++++++--
March/arm/boot/dts/am335x-osd3358-sm-red.dts | 8++++++--
March/arm/boot/dts/am335x-pdu001.dts | 14+++++++++++---
March/arm/boot/dts/am335x-pepper.dts | 12++++++++++--
March/arm/boot/dts/am335x-sancloud-bbe.dts | 6+++++-
March/arm/boot/dts/am335x-shc.dts | 1-
Aarch/arm/boot/dts/am3517-evm-ui.dtsi | 220+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm/boot/dts/am3517-evm.dts | 1+
March/arm/boot/dts/am4372.dtsi | 2+-
March/arm/boot/dts/am437x-cm-t43.dts | 12++++++++++--
March/arm/boot/dts/am437x-gp-evm.dts | 6+++++-
March/arm/boot/dts/am437x-idk-evm.dts | 6+++++-
March/arm/boot/dts/am437x-sk-evm.dts | 12++++++++++--
March/arm/boot/dts/am43x-epos-evm.dts | 6+++++-
March/arm/boot/dts/am571x-idk.dts | 84+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----
March/arm/boot/dts/am572x-idk-common.dtsi | 76++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm/boot/dts/am572x-idk.dts | 4----
March/arm/boot/dts/am57xx-cl-som-am57x.dts | 14+++++++++++---
March/arm/boot/dts/am57xx-idk-common.dtsi | 18++++++++++++++++--
March/arm/boot/dts/arm-realview-eb.dtsi | 2+-
March/arm/boot/dts/arm-realview-pb1176.dts | 2+-
March/arm/boot/dts/arm-realview-pb11mp.dts | 2+-
March/arm/boot/dts/arm-realview-pbx.dtsi | 2+-
Aarch/arm/boot/dts/armada-385-db-88f6820-amc.dts | 155+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm/boot/dts/armada-388-clearfog.dtsi | 2+-
March/arm/boot/dts/armada-xp-98dx3236.dtsi | 4++--
March/arm/boot/dts/armada-xp-98dx3336.dtsi | 2+-
March/arm/boot/dts/armada-xp-98dx4251.dtsi | 2+-
March/arm/boot/dts/armada-xp-db-dxbc2.dts | 18+++++++++++-------
March/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts | 18+++++++++++-------
Aarch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts | 207+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Aarch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts | 146+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm/boot/dts/aspeed-bmc-quanta-q71l.dts | 47+++++++++++++++++++++++++++++++++++++++++++++++
March/arm/boot/dts/aspeed-g4.dtsi | 2+-
March/arm/boot/dts/aspeed-g5.dtsi | 2+-
March/arm/boot/dts/at91-dvk_su60_somc.dtsi | 4++--
March/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi | 4++--
March/arm/boot/dts/at91-nattis-2-natte-2.dts | 103++++++++++++++++++++++++++++++++++++++++++++-----------------------------------
March/arm/boot/dts/at91-sama5d27_som1_ek.dts | 42++++++++++++++++++++++++++++++++++++++++++
March/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 8++++----
March/arm/boot/dts/at91-sama5d2_xplained.dts | 30++++++++++++++++++++++++++++++
March/arm/boot/dts/at91-sama5d3_xplained.dts | 11++++++++---
March/arm/boot/dts/at91-sama5d4_xplained.dts | 13+++++++++----
March/arm/boot/dts/at91-tse850-3.dts | 32+++++++++++++-------------------
March/arm/boot/dts/at91-vinco.dts | 2+-
March/arm/boot/dts/at91sam9260ek.dts | 2+-
March/arm/boot/dts/at91sam9261ek.dts | 2+-
March/arm/boot/dts/at91sam9g20ek_common.dtsi | 2+-
March/arm/boot/dts/at91sam9g45.dtsi | 2+-
March/arm/boot/dts/at91sam9x5cm.dtsi | 18++++++++++++++----
March/arm/boot/dts/bcm-hr2.dtsi | 2+-
March/arm/boot/dts/bcm-nsp.dtsi | 33+++++++++++++++++++++++++++++++--
Aarch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts | 87+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Aarch/arm/boot/dts/bcm2837-rpi-cm3.dtsi | 52++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm/boot/dts/bcm283x-rpi-lan7515.dtsi | 14++++++++++++++
March/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 28++++++++++++++++++++++++++++
March/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 31+++++++++++++++++++++++++++++++
March/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 28++++++++++++++++++++++++++++
March/arm/boot/dts/bcm5301x-nand-cs0.dtsi | 4++++
March/arm/boot/dts/bcm5301x.dtsi | 5++++-
March/arm/boot/dts/bcm958625hr.dts | 26++++++++++++++++++++++++++
March/arm/boot/dts/da850-evm.dts | 6++++++
March/arm/boot/dts/da850-lego-ev3.dts | 3++-
March/arm/boot/dts/dm8148-evm.dts | 14++++++++++++--
March/arm/boot/dts/dm8148-t410.dts | 14++++++++++++--
March/arm/boot/dts/dove-cubox.dts | 2+-
March/arm/boot/dts/dove.dtsi | 6+++---
March/arm/boot/dts/dra62x-j5eco-evm.dts | 14++++++++++++--
March/arm/boot/dts/dra7-evm.dts | 14++++++++++++--
March/arm/boot/dts/dra7.dtsi | 6++++--
March/arm/boot/dts/dra71-evm.dts | 4++--
March/arm/boot/dts/dra72-evm-revc.dts | 4++--
March/arm/boot/dts/dra72-evm.dts | 8+++++++-
March/arm/boot/dts/dra76-evm.dts | 4++--
March/arm/boot/dts/exynos3250-artik5.dtsi | 7+++++++
March/arm/boot/dts/exynos4210-origen.dts | 9+++++++++
March/arm/boot/dts/exynos4210-trats.dts | 15+++++++++++++++
March/arm/boot/dts/exynos4210-universal_c210.dts | 11+++++++++--
March/arm/boot/dts/exynos4412-midas.dtsi | 3+--
March/arm/boot/dts/exynos4412-odroid-common.dtsi | 3+--
March/arm/boot/dts/exynos5250-arndale.dts | 102++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-------
March/arm/boot/dts/exynos5250-pinctrl.dtsi | 11+++++++++++
March/arm/boot/dts/exynos5250-snow-rev5.dts | 11+++++++++++
March/arm/boot/dts/exynos5250.dtsi | 152+++++++++++++++++++++++++++++++++++++++++++++++++++++++++----------------------
March/arm/boot/dts/exynos5410-odroidxu.dts | 10+++++++++-
March/arm/boot/dts/exynos5420-peach-pit.dts | 5++++-
March/arm/boot/dts/exynos5422-odroid-core.dtsi | 157+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------
March/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 6++++++
March/arm/boot/dts/exynos5422-odroidxu3.dts | 6++++++
March/arm/boot/dts/exynos5800-peach-pi.dts | 5++++-
March/arm/boot/dts/hip04.dtsi | 346++++++++++++++++++++++++++++++++++++++++---------------------------------------
March/arm/boot/dts/imx1.dtsi | 4++--
March/arm/boot/dts/imx23-evk.dts | 2+-
March/arm/boot/dts/imx23-olinuxino.dts | 4++--
March/arm/boot/dts/imx23-sansa.dts | 4++--
March/arm/boot/dts/imx23-stmp378x_devb.dts | 2+-
March/arm/boot/dts/imx23-xfi3.dts | 4++--
March/arm/boot/dts/imx23.dtsi | 4++--
March/arm/boot/dts/imx25.dtsi | 6+++---
March/arm/boot/dts/imx27.dtsi | 6+++---
March/arm/boot/dts/imx28-apf28dev.dts | 4++--
March/arm/boot/dts/imx28-apx4devkit.dts | 4++--
March/arm/boot/dts/imx28-cfa10036.dts | 2+-
March/arm/boot/dts/imx28-duckbill-2-485.dts | 4++--
March/arm/boot/dts/imx28-duckbill-2-enocean.dts | 4++--
March/arm/boot/dts/imx28-duckbill-2-spi.dts | 4++--
March/arm/boot/dts/imx28-duckbill-2.dts | 4++--
March/arm/boot/dts/imx28-duckbill.dts | 4++--
March/arm/boot/dts/imx28-evk.dts | 6+++---
March/arm/boot/dts/imx28-m28cu3.dts | 4++--
March/arm/boot/dts/imx28-m28evk.dts | 4++--
March/arm/boot/dts/imx28-sps1.dts | 4++--
March/arm/boot/dts/imx28-ts4600.dts | 2+-
March/arm/boot/dts/imx28.dtsi | 8++++----
March/arm/boot/dts/imx31.dtsi | 4++--
March/arm/boot/dts/imx35.dtsi | 4++--
March/arm/boot/dts/imx50.dtsi | 6+++---
March/arm/boot/dts/imx51-babbage.dts | 1+
March/arm/boot/dts/imx51-zii-rdu1.dts | 2+-
March/arm/boot/dts/imx51-zii-scu2-mezz.dts | 8++++++++
March/arm/boot/dts/imx51-zii-scu3-esb.dts | 4++++
March/arm/boot/dts/imx51.dtsi | 8++++----
March/arm/boot/dts/imx53-ppd.dts | 1-
March/arm/boot/dts/imx53.dtsi | 6+++---
March/arm/boot/dts/imx6dl-colibri-eval-v3.dts | 2+-
March/arm/boot/dts/imx6dl-icore-mipi.dts | 2+-
March/arm/boot/dts/imx6dl-icore-rqs.dts | 38+-------------------------------------
March/arm/boot/dts/imx6dl-icore.dts | 38+-------------------------------------
March/arm/boot/dts/imx6dl-riotboard.dts | 5+++++
March/arm/boot/dts/imx6q-apalis-eval.dts | 2++
March/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts | 2++
March/arm/boot/dts/imx6q-apalis-ixora.dts | 2++
March/arm/boot/dts/imx6q-icore-mipi.dts | 6+++---
March/arm/boot/dts/imx6q-icore-ofcap10.dts | 38+-------------------------------------
March/arm/boot/dts/imx6q-icore-ofcap12.dts | 38+-------------------------------------
March/arm/boot/dts/imx6q-icore-rqs.dts | 39++-------------------------------------
March/arm/boot/dts/imx6q-icore.dts | 38+-------------------------------------
March/arm/boot/dts/imx6q.dtsi | 2+-
March/arm/boot/dts/imx6qdl-apalis.dtsi | 4----
Aarch/arm/boot/dts/imx6qdl-icore-1.5.dtsi | 34++++++++++++++++++++++++++++++++++
March/arm/boot/dts/imx6qdl-icore-rqs.dtsi | 41+++--------------------------------------
March/arm/boot/dts/imx6qdl-icore.dtsi | 42+++---------------------------------------
March/arm/boot/dts/imx6qdl-sabreauto.dtsi | 67+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm/boot/dts/imx6qdl-wandboard.dtsi | 4++++
March/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 4++++
March/arm/boot/dts/imx6qdl.dtsi | 8++++----
March/arm/boot/dts/imx6sl.dtsi | 8++++----
March/arm/boot/dts/imx6sll.dtsi | 31+++++++++++++++++++++++++++++++
March/arm/boot/dts/imx6sx-sdb.dtsi | 2++
March/arm/boot/dts/imx6sx.dtsi | 14+++++++-------
Aarch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 390+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm/boot/dts/imx6ul-geam.dts | 40++--------------------------------------
March/arm/boot/dts/imx6ul-isiot-emmc.dts | 61+------------------------------------------------------------
March/arm/boot/dts/imx6ul-isiot-nand.dts | 63+--------------------------------------------------------------
March/arm/boot/dts/imx6ul-isiot.dtsi | 90++++++++++++++++++++++++++++++++++++++++++++++---------------------------------
March/arm/boot/dts/imx6ul.dtsi | 28++++++++++++++++++++++------
March/arm/boot/dts/imx6ull-14x14-evk.dts | 2+-
March/arm/boot/dts/imx6ull-pinfunc.h | 39++++++++++++++++++++++++++++++++-------
March/arm/boot/dts/imx6ull.dtsi | 2+-
Aarch/arm/boot/dts/imx6ulz-14x14-evk.dts | 20++++++++++++++++++++
Aarch/arm/boot/dts/imx6ulz.dtsi | 38++++++++++++++++++++++++++++++++++++++
March/arm/boot/dts/imx7d-sdb.dts | 2++
March/arm/boot/dts/imx7d.dtsi | 15++++++++++-----
March/arm/boot/dts/imx7s-warp.dts | 53+++++++++++++++--------------------------------------
March/arm/boot/dts/imx7s.dtsi | 131+++++++++++++++++++++++++++++++++++++++++++++----------------------------------
March/arm/boot/dts/imx7ulp-pinfunc.h | 16+++++++++++++++-
March/arm/boot/dts/iwg20d-q7-common.dtsi | 4----
March/arm/boot/dts/keystone-k2g.dtsi | 2+-
March/arm/boot/dts/lpc32xx.dtsi | 4++--
March/arm/boot/dts/ls1021a-qds.dts | 2++
March/arm/boot/dts/ls1021a-twr.dts | 2++
March/arm/boot/dts/ls1021a.dtsi | 12+++++++++---
March/arm/boot/dts/meson8.dtsi | 2+-
Aarch/arm/boot/dts/meson8b-ec100.dts | 248+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm/boot/dts/meson8b-odroidc1.dts | 109+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm/boot/dts/meson8b.dtsi | 47++++++++++++++++++++++++++++++++++++++++++++++-
March/arm/boot/dts/mt7623.dtsi | 124+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm/boot/dts/omap2.dtsi | 4++--
March/arm/boot/dts/omap2430.dtsi | 2+-
March/arm/boot/dts/omap3-beagle-xm.dts | 17++++++++++-------
March/arm/boot/dts/omap3-beagle.dts | 17++++++++++-------
March/arm/boot/dts/omap3-gta04.dtsi | 262++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---------
March/arm/boot/dts/omap3-gta04a3.dts | 2+-
March/arm/boot/dts/omap3-gta04a4.dts | 2+-
March/arm/boot/dts/omap3-gta04a5.dts | 129+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--
Aarch/arm/boot/dts/omap3-gta04a5one.dts | 114+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm/boot/dts/omap3-n9.dts | 2+-
March/arm/boot/dts/omap5-board-common.dtsi | 4++++
March/arm/boot/dts/orion5x-linkstation.dtsi | 2+-
March/arm/boot/dts/owl-s500-cubieboard6.dts | 3+--
March/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts | 3+--
March/arm/boot/dts/owl-s500-guitar.dtsi | 3+--
March/arm/boot/dts/owl-s500.dtsi | 3+--
March/arm/boot/dts/pxa25x.dtsi | 4++++
March/arm/boot/dts/pxa27x.dtsi | 6+++++-
March/arm/boot/dts/pxa2xx.dtsi | 27+++++++++++++++++++++++----
March/arm/boot/dts/qcom-apq8064.dtsi | 71++++++++++++++++++++++++++++++++++++++++-------------------------------
March/arm/boot/dts/qcom-ipq4019.dtsi | 143+++++++++++++++++++++++++++++++++++++++++--------------------------------------
March/arm/boot/dts/qcom-ipq8064-ap148.dts | 83+++++++------------------------------------------------------------------------
March/arm/boot/dts/qcom-ipq8064-v1.0.dtsi | 125+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm/boot/dts/qcom-ipq8064.dtsi | 286+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 83+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm/boot/dts/qcom-msm8974.dtsi | 198++++++++++++++++++++++++++++++++++++++++++++++---------------------------------
March/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts | 4++++
March/arm/boot/dts/r8a7743-iwg20d-q7.dts | 4++++
March/arm/boot/dts/r8a77470-iwg23s-sbc.dts | 12++++++++++++
March/arm/boot/dts/r8a77470.dtsi | 168++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-------
March/arm/boot/dts/r8a7778-bockw.dts | 2+-
March/arm/boot/dts/r8a7778.dtsi | 2+-
March/arm/boot/dts/r8a7779-marzen.dts | 2+-
March/arm/boot/dts/r8a7779.dtsi | 4++--
March/arm/boot/dts/r8a7790-stout.dts | 4++++
March/arm/boot/dts/r8a7790.dtsi | 6+++---
March/arm/boot/dts/r8a7791.dtsi | 6+++---
March/arm/boot/dts/r8a7792.dtsi | 3+--
March/arm/boot/dts/r8a7793-gose.dts | 16++++++++++++++++
March/arm/boot/dts/r8a7793.dtsi | 2+-
March/arm/boot/dts/r8a7794-silk.dts | 25+++++++++++++++++++++++++
March/arm/boot/dts/r8a7794.dtsi | 3+--
March/arm/boot/dts/r9a06g032.dtsi | 88++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----
March/arm/boot/dts/rk3036.dtsi | 2+-
March/arm/boot/dts/rk3188-radxarock.dts | 8++++++++
March/arm/boot/dts/rk3188.dtsi | 82+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Aarch/arm/boot/dts/rk3288-tinker-s.dts | 26++++++++++++++++++++++++++
March/arm/boot/dts/rk3288-tinker.dts | 498+------------------------------------------------------------------------------
Aarch/arm/boot/dts/rk3288-tinker.dtsi | 502+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm/boot/dts/s5pv210.dtsi | 2+-
March/arm/boot/dts/sama5d2.dtsi | 123++++++++++++++++++++++++++++++++++++++++++++++++++-----------------------------
March/arm/boot/dts/sama5d4.dtsi | 8++++----
March/arm/boot/dts/socfpga.dtsi | 22++++++++++++++++++----
March/arm/boot/dts/socfpga_arria10.dtsi | 32++++++++++++++++++++++++++++----
Aarch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts | 112+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Darch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts | 112-------------------------------------------------------------------------------
March/arm/boot/dts/socfpga_cyclone5_socrates.dts | 7++++++-
March/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts | 3++-
March/arm/boot/dts/ste-dbx5x0.dtsi | 80++++++++++++++++++++++++++++++++++++++++++-------------------------------------
March/arm/boot/dts/ste-href-family-pinctrl.dtsi | 8++++++--
March/arm/boot/dts/ste-href.dtsi | 1+
March/arm/boot/dts/ste-hrefprev60.dtsi | 2+-
March/arm/boot/dts/ste-snowball.dts | 3++-
March/arm/boot/dts/ste-u300.dts | 2+-
March/arm/boot/dts/stih410-b2260.dts | 5++++-
March/arm/boot/dts/stihxxx-b2120.dtsi | 11++++++++---
March/arm/boot/dts/stm32429i-eval.dts | 3+--
March/arm/boot/dts/stm32f429.dtsi | 2+-
March/arm/boot/dts/stm32f469-disco.dts | 3+--
March/arm/boot/dts/stm32f746-disco.dts | 3+--
March/arm/boot/dts/stm32f769-disco.dts | 3+--
March/arm/boot/dts/stm32h743.dtsi | 2+-
March/arm/boot/dts/stm32mp157c-ev1.dts | 73+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------
March/arm/boot/dts/stm32mp157c.dtsi | 2+-
March/arm/boot/dts/sun5i-reference-design-tablet.dtsi | 3++-
March/arm/boot/dts/sun5i.dtsi | 26++++++++++++++++++++++++++
March/arm/boot/dts/sun7i-a20.dtsi | 26++++++++++++++++++++++++++
March/arm/boot/dts/sun8i-a33.dtsi | 26++++++++++++++++++++++++++
March/arm/boot/dts/sun8i-a83t-bananapi-m3.dts | 5+++++
March/arm/boot/dts/sun8i-a83t.dtsi | 18++++++++++++++++++
Aarch/arm/boot/dts/sun8i-h3-bananapi-m2-plus-v1.2.dts | 13+++++++++++++
March/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts | 190+------------------------------------------------------------------------------
Aarch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts | 140+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm/boot/dts/sun8i-h3.dtsi | 25+++++++++++++++++++++++++
March/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 21+++++++++++++++++++--
March/arm/boot/dts/sun8i-r40.dtsi | 13+++++++++++++
March/arm/boot/dts/sun8i-reference-design-tablet.dtsi | 3++-
March/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts | 2+-
March/arm/boot/dts/sun9i-a80.dtsi | 2+-
Aarch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi | 31+++++++++++++++++++++++++++++++
Aarch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi | 231+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm/boot/dts/sunxi-h3-h5.dtsi | 2+-
March/arm/boot/dts/tegra124-apalis-eval.dts | 40+++++++++++++++++++++++-----------------
March/arm/boot/dts/tegra124-apalis-v1.2-eval.dts | 43+++++++++++++++++++++++++------------------
March/arm/boot/dts/tegra124-apalis-v1.2.dtsi | 452++++++++++++++++++++++++++++++++++++++++---------------------------------------
March/arm/boot/dts/tegra124-apalis.dtsi | 451++++++++++++++++++++++++++++++++++++++++---------------------------------------
Aarch/arm/boot/dts/tegra20-colibri-eval-v3.dts | 262+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm/boot/dts/tegra20-colibri-iris.dts | 200++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-------------
March/arm/boot/dts/tegra20-colibri.dtsi | 657++++++++++++++++++++++++++++++++++++++++++++++++++++---------------------------
March/arm/boot/dts/tegra20-paz00.dts | 12++++++------
March/arm/boot/dts/tegra20.dtsi | 28+++++++++++++++-------------
March/arm/boot/dts/tegra30-apalis-eval.dts | 148+++++++++++++++++++++++++++++++++----------------------------------------------
Aarch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts | 266+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Aarch/arm/boot/dts/tegra30-apalis-v1.1.dtsi | 1189+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm/boot/dts/tegra30-apalis.dtsi | 705+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------
March/arm/boot/dts/tegra30-colibri-eval-v3.dts | 130+++++++++++++++++++++++++++++++++++--------------------------------------------
March/arm/boot/dts/tegra30-colibri.dtsi | 780+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--------------
March/arm/boot/dts/tegra30.dtsi | 10+++++++---
March/arm/boot/dts/uniphier-ld4-ref.dts | 4++++
March/arm/boot/dts/uniphier-ld4.dtsi | 48+++++++++++++++++++++++++++++++++++++++++++++++-
March/arm/boot/dts/uniphier-ld6b-ref.dts | 12++++++++++++
March/arm/boot/dts/uniphier-pinctrl.dtsi | 25+++++++++++++++++++++++++
March/arm/boot/dts/uniphier-pro4-ace.dts | 12++++++++++++
March/arm/boot/dts/uniphier-pro4-ref.dts | 12++++++++++++
March/arm/boot/dts/uniphier-pro4-sanji.dts | 12++++++++++++
March/arm/boot/dts/uniphier-pro4.dtsi | 189++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
March/arm/boot/dts/uniphier-pro5.dtsi | 59++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
March/arm/boot/dts/uniphier-pxs2-gentil.dts | 12++++++++++++
March/arm/boot/dts/uniphier-pxs2-vodka.dts | 8++++++++
March/arm/boot/dts/uniphier-pxs2.dtsi | 239++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
March/arm/boot/dts/uniphier-sld8-ref.dts | 4++++
March/arm/boot/dts/uniphier-sld8.dtsi | 48+++++++++++++++++++++++++++++++++++++++++++++++-
March/arm/boot/dts/versatile-ab.dts | 2+-
March/arm/boot/dts/vf500.dtsi | 43+++----------------------------------------
March/arm/boot/dts/vf610-twr.dts | 43+++----------------------------------------
March/arm/boot/dts/vf610-zii-cfu1.dts | 30++++++++++++++++++++++++++++++
March/arm/boot/dts/vf610-zii-dev-rev-c.dts | 44+++++++++++++++++++++++++-------------------
March/arm/boot/dts/vf610.dtsi | 44++++----------------------------------------
March/arm/boot/dts/vfxxx.dtsi | 55+++++++++----------------------------------------------
March/arm/boot/dts/zynq-zc702.dts | 12++++++------
March/arm/boot/dts/zynq-zc770-xm010.dts | 2+-
March/arm/boot/dts/zynq-zc770-xm013.dts | 2+-
March/arm/mach-exynos/common.h | 1+
March/arm/mach-exynos/firmware.c | 14+++++++++++---
March/arm/mach-exynos/suspend.c | 34++++++++++++++++++++++++----------
March/arm/mach-s3c24xx/mach-gta02.c | 42------------------------------------------
March/arm/mach-s3c24xx/mach-mini2440.c | 113++++++++++++++++++++++++++++++++++++++++++-------------------------------------
March/arm64/boot/dts/actions/Makefile | 2++
March/arm64/boot/dts/actions/s700-cubieboard7.dts | 7-------
March/arm64/boot/dts/actions/s700.dtsi | 21+++++++++++++++++++++
March/arm64/boot/dts/actions/s900-bubblegum-96.dts | 224++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---
March/arm64/boot/dts/actions/s900.dtsi | 118+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--
March/arm64/boot/dts/allwinner/Makefile | 4++++
March/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts | 2+-
March/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts | 30++++++++++++++++++++++++++++--
March/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts | 85+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----
March/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts | 99++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---
March/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts | 175++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---
Aarch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts | 13+++++++++++++
March/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 28+++++++++++++++++++++++++++-
March/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts | 9++++-----
March/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts | 28+++++++++++++++++++++++++++-
March/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts | 2+-
March/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 193+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--
Aarch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts | 11+++++++++++
Aarch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus.dts | 11+++++++++++
March/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 43+++++++++++++++++++++++++++++++++++++++++++
Aarch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts | 150+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 23+++++++++++++++++++++++
March/arm64/boot/dts/altera/socfpga_stratix10.dtsi | 2+-
March/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts | 5+++++
March/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 4++--
March/arm64/boot/dts/amlogic/Makefile | 1+
March/arm64/boot/dts/amlogic/meson-axg-s400.dts | 370++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----------------
March/arm64/boot/dts/amlogic/meson-axg.dtsi | 1615+++++++++++++++++++++++++++++++++++++++++--------------------------------------
Aarch/arm64/boot/dts/amlogic/meson-g12a-u200.dts | 29+++++++++++++++++++++++++++++
Aarch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 172+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm64/boot/dts/amlogic/meson-gx.dtsi | 19++++++++++++++++---
March/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 2+-
March/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 2+-
March/arm64/boot/dts/amlogic/meson-gxl.dtsi | 2+-
March/arm64/boot/dts/arm/juno-base.dtsi | 162++++++++++++++++++++++++++++++++++++++++---------------------------------------
March/arm64/boot/dts/arm/juno-cs-r1r2.dtsi | 52++++++++++++++++++----------------------------------
March/arm64/boot/dts/arm/juno.dts | 13+++++--------
March/arm64/boot/dts/broadcom/Makefile | 3++-
Aarch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts | 2++
March/arm64/boot/dts/broadcom/northstar2/ns2.dtsi | 4++--
March/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi | 2+-
March/arm64/boot/dts/broadcom/stingray/stingray.dtsi | 4++--
March/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi | 18+++++++++++++++---
March/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 2+-
March/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 2++
March/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 2++
March/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 8++++----
March/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts | 2++
March/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 4++--
March/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 6+++---
March/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 20++++++++++++++++++--
March/arm64/boot/dts/hisilicon/Makefile | 1+
Aarch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts | 35+++++++++++++++++++++++++++++++++++
Aarch/arm64/boot/dts/hisilicon/hi3670.dtsi | 162+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi | 181++++++++++++++++++++++++++++++++++++++-----------------------------------------
March/arm64/boot/dts/hisilicon/hi6220.dtsi | 7+++++++
March/arm64/boot/dts/lg/lg1312.dtsi | 4++--
March/arm64/boot/dts/lg/lg1313.dtsi | 4++--
March/arm64/boot/dts/marvell/Makefile | 1+
March/arm64/boot/dts/marvell/armada-372x.dtsi | 2+-
March/arm64/boot/dts/marvell/armada-37xx.dtsi | 15++++++++++++++-
Aarch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts | 441+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm64/boot/dts/marvell/armada-ap806-dual.dtsi | 4++--
March/arm64/boot/dts/marvell/armada-ap806-quad.dtsi | 12++++++++----
March/arm64/boot/dts/marvell/armada-ap806.dtsi | 110++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---
March/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi | 16++++++++--------
March/arm64/boot/dts/marvell/armada-common.dtsi | 1+
March/arm64/boot/dts/marvell/armada-cp110.dtsi | 189+++++++++++++++++++++++++++++++++++++++++++++++++++----------------------------
March/arm64/boot/dts/mediatek/Makefile | 1+
March/arm64/boot/dts/mediatek/mt2712e.dtsi | 11+++++++++++
Aarch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 530+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 196++++++++++++++++++++++++++++++++++++++++----------------------------------------
March/arm64/boot/dts/mediatek/mt7622.dtsi | 62++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm64/boot/dts/nvidia/tegra186.dtsi | 76++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm64/boot/dts/nvidia/tegra194.dtsi | 16++++++++--------
March/arm64/boot/dts/nvidia/tegra210-p2180.dtsi | 12++----------
March/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 1-
March/arm64/boot/dts/nvidia/tegra210.dtsi | 57+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm64/boot/dts/qcom/Makefile | 1+
March/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 14++++++++++++++
March/arm64/boot/dts/qcom/apq8096-db820c.dts | 2+-
March/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 14++++++++++++++
March/arm64/boot/dts/qcom/msm8916.dtsi | 98+++++++++++++++++++++++++++++++++++++++++--------------------------------------
March/arm64/boot/dts/qcom/msm8996.dtsi | 15++++-----------
Aarch/arm64/boot/dts/qcom/msm8998-mtp.dts | 13+++++++++++++
Aarch/arm64/boot/dts/qcom/msm8998-mtp.dtsi | 243+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Aarch/arm64/boot/dts/qcom/msm8998.dtsi | 690+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm64/boot/dts/qcom/pm8916.dtsi | 18+++++++++++++-----
March/arm64/boot/dts/qcom/pm8994.dtsi | 18++++++++++++++++++
March/arm64/boot/dts/qcom/pm8998.dtsi | 75++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
Aarch/arm64/boot/dts/qcom/pmi8998.dtsi | 40++++++++++++++++++++++++++++++++++++++++
March/arm64/boot/dts/qcom/sdm845-mtp.dts | 382+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm64/boot/dts/qcom/sdm845.dtsi | 300+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm64/boot/dts/renesas/Makefile | 2++
Aarch/arm64/boot/dts/renesas/r8a774a1.dtsi | 1663+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts | 3+--
March/arm64/boot/dts/renesas/r8a7795-es1.dtsi | 18+++++++++---------
March/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 3+--
March/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 3+--
March/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts | 17+++++++++++++++--
March/arm64/boot/dts/renesas/r8a7795.dtsi | 137++++++++++++++++++++++++++++++++++++++++++++++---------------------------------
March/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts | 3+--
March/arm64/boot/dts/renesas/r8a7796-salvator-x.dts | 3+--
March/arm64/boot/dts/renesas/r8a7796.dtsi | 103++++++++++++++++++++++++++++++++++++++++++++++++-------------------------------
Aarch/arm64/boot/dts/renesas/r8a77965-m3nulcb-kf.dts | 16++++++++++++++++
Aarch/arm64/boot/dts/renesas/r8a77965-m3nulcb.dts | 33+++++++++++++++++++++++++++++++++
March/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts | 14++++++++++++++
March/arm64/boot/dts/renesas/r8a77965.dtsi | 417++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---------
March/arm64/boot/dts/renesas/r8a77970-v3msk.dts | 26++++++++++++++++++++++++++
March/arm64/boot/dts/renesas/r8a77970.dtsi | 116++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---------
March/arm64/boot/dts/renesas/r8a77980-condor.dts | 123+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm64/boot/dts/renesas/r8a77980-v3hsk.dts | 134+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm64/boot/dts/renesas/r8a77980.dtsi | 677+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--------
March/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 272+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm64/boot/dts/renesas/r8a77990.dtsi | 681+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----
March/arm64/boot/dts/renesas/r8a77995-draak.dts | 362++++++++++++++++++++++++++++++++++++++++++++++++++-----------------------------
March/arm64/boot/dts/renesas/r8a77995.dtsi | 82++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-------
March/arm64/boot/dts/renesas/salvator-common.dtsi | 9++++++++-
March/arm64/boot/dts/renesas/ulcb-kf.dtsi | 2+-
March/arm64/boot/dts/renesas/ulcb.dtsi | 4++++
March/arm64/boot/dts/rockchip/Makefile | 4++++
Aarch/arm64/boot/dts/rockchip/px30-evb.dts | 235+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Aarch/arm64/boot/dts/rockchip/px30.dtsi | 2047+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm64/boot/dts/rockchip/rk3328-roc-cc.dts | 30++++++++++++++++++++++++++++++
March/arm64/boot/dts/rockchip/rk3328-rock64.dts | 61+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--
March/arm64/boot/dts/rockchip/rk3328.dtsi | 74+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
March/arm64/boot/dts/rockchip/rk3399-ficus.dts | 524+------------------------------------------------------------------------------
March/arm64/boot/dts/rockchip/rk3399-firefly.dts | 36++++++++++++++++++++++++++++++++++++
March/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts | 2+-
Aarch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts | 680+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Aarch/arm64/boot/dts/rockchip/rk3399-rock960.dts | 52++++++++++++++++++++++++++++++++++++++++++++++++++++
Aarch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi | 542+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Aarch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts | 692+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi | 68++++++++++++++++++++++++++++++++++++++++++++++++++------------------
March/arm64/boot/dts/rockchip/rk3399.dtsi | 32++++++++++++++++++++++++++++++++
March/arm64/boot/dts/socionext/uniphier-ld11.dtsi | 52+++++++++++++++++++++++++++++++++++++++++++++++++++-
March/arm64/boot/dts/socionext/uniphier-ld20-global.dts | 4++++
March/arm64/boot/dts/socionext/uniphier-ld20-ref.dts | 4++++
March/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 255++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
March/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts | 12++++++++++++
March/arm64/boot/dts/socionext/uniphier-pxs3.dtsi | 283++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
Aarch/arm64/boot/dts/synaptics/as370.dtsi | 173+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
March/arm64/boot/dts/ti/k3-am65-main.dtsi | 51++++++++++++++++++++++++++++++++++++++++++++++-----
Aarch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 18++++++++++++++++++
Aarch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 46++++++++++++++++++++++++++++++++++++++++++++++
March/arm64/boot/dts/ti/k3-am65.dtsi | 54++++++++++++++++++++++++++++++++----------------------
March/arm64/boot/dts/ti/k3-am654-base-board.dts | 5+++++
Ainclude/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h | 18++++++++++++++++++
Ainclude/dt-bindings/power/owl-s900-powergate.h | 23+++++++++++++++++++++++
511 files changed, 29305 insertions(+), 6446 deletions(-)

diff --git a/Documentation/arm/Samsung/Bootloader-interface.txt b/Documentation/arm/Samsung/Bootloader-interface.txt @@ -26,6 +26,7 @@ Offset Value Purpose 0x20 0xfcba0d10 (Magic cookie) AFTR 0x24 exynos_cpu_resume_ns AFTR 0x28 + 4*cpu 0x8 (Magic cookie, Exynos3250) AFTR +0x28 0x0 or last value during resume (Exynos542x) System suspend 2. Secure mode diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt @@ -57,12 +57,17 @@ Boards with the Amlogic Meson AXG A113D SoC shall have the following properties: Required root node property: compatible: "amlogic,a113d", "amlogic,meson-axg"; +Boards with the Amlogic Meson G12A S905D2 SoC shall have the following properties: + Required root node property: + compatible: "amlogic,g12a"; + Board compatible values (alphabetically, grouped by SoC): - "geniatech,atv1200" (Meson6) - "minix,neo-x8" (Meson8) + - "endless,ec100" (Meson8b) - "hardkernel,odroid-c1" (Meson8b) - "tronfy,mxq" (Meson8b) @@ -101,6 +106,8 @@ Board compatible values (alphabetically, grouped by SoC): - "amlogic,s400" (Meson axg a113d) + - "amlogic,u200" (Meson g12a s905d2) + Amlogic Meson Firmware registers Interface ------------------------------------------ diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt @@ -42,6 +42,14 @@ Raspberry Pi Compute Module Required root node properties: compatible = "raspberrypi,compute-module", "brcm,bcm2835"; +Raspberry Pi Compute Module 3 +Required root node properties: +compatible = "raspberrypi,3-compute-module", "brcm,bcm2837"; + +Raspberry Pi Compute Module 3 Lite +Required root node properties: +compatible = "raspberrypi,3-compute-module-lite", "brcm,bcm2837"; + Raspberry Pi Zero Required root node properties: compatible = "raspberrypi,model-zero", "brcm,bcm2835"; diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt @@ -57,6 +57,50 @@ i.MX6SLL EVK board Required root node properties: - compatible = "fsl,imx6sll-evk", "fsl,imx6sll"; +i.MX6 Quad Plus SABRE Smart Device Board +Required root node properties: + - compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp"; + +i.MX6 Quad Plus SABRE Automotive Board +Required root node properties: + - compatible = "fsl,imx6qp-sabreauto", "fsl,imx6qp"; + +i.MX6 DualLite SABRE Smart Device Board +Required root node properties: + - compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl"; + +i.MX6 DualLite/Solo SABRE Automotive Board +Required root node properties: + - compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl"; + +i.MX6 SoloLite EVK Board +Required root node properties: + - compatible = "fsl,imx6sl-evk", "fsl,imx6sl"; + +i.MX6 UltraLite 14x14 EVK Board +Required root node properties: + - compatible = "fsl,imx6ul-14x14-evk", "fsl,imx6ul"; + +i.MX6 UltraLiteLite 14x14 EVK Board +Required root node properties: + - compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull"; + +i.MX6 ULZ 14x14 EVK Board +Required root node properties: + - compatible = "fsl,imx6ulz-14x14-evk", "fsl,imx6ull", "fsl,imx6ulz"; + +i.MX6 SoloX SDB Board +Required root node properties: + - compatible = "fsl,imx6sx-sdb", "fsl,imx6sx"; + +i.MX6 SoloX Sabre Auto Board +Required root node properties: + - compatible = "fsl,imx6sx-sabreauto", "fsl,imx6sx"; + +i.MX7 SabreSD Board +Required root node properties: + - compatible = "fsl,imx7d-sdb", "fsl,imx7d"; + Generic i.MX boards ------------------- diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt @@ -8,6 +8,14 @@ HiKey960 Board Required root node properties: - compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660"; +Hi3670 SoC +Required root node properties: + - compatible = "hisilicon,hi3670"; + +HiKey970 Board +Required root node properties: + - compatible = "hisilicon,hi3670-hikey970", "hisilicon,hi3670"; + Hi3798cv200 SoC Required root node properties: - compatible = "hisilicon,hi3798cv200"; diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,berlin.txt b/Documentation/devicetree/bindings/arm/marvell/marvell,berlin.txt @@ -1,96 +0,0 @@ -Marvell Berlin SoC Family Device Tree Bindings ---------------------------------------------------------------- - -Work in progress statement: - -Device tree files and bindings applying to Marvell Berlin SoCs and boards are -considered "unstable". Any Marvell Berlin device tree binding may change at any -time. Be sure to use a device tree binary and a kernel image generated from the -same source tree. - -Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a -stable binding/ABI. - ---------------------------------------------------------------- - -Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500 -shall have the following properties: - -* Required root node properties: -compatible: must contain "marvell,berlin" - -In addition, the above compatible shall be extended with the specific -SoC and board used. Currently known SoC compatibles are: - "marvell,berlin2" for Marvell Armada 1500 (BG2, 88DE3100), - "marvell,berlin2cd" for Marvell Armada 1500-mini (BG2CD, 88DE3005) - "marvell,berlin2ct" for Marvell Armada ? (BG2CT, 88DE????) - "marvell,berlin2q" for Marvell Armada 1500-pro (BG2Q, 88DE3114) - "marvell,berlin3" for Marvell Armada ? (BG3, 88DE????) - -* Example: - -/ { - model = "Sony NSZ-GS7"; - compatible = "sony,nsz-gs7", "marvell,berlin2", "marvell,berlin"; - - ... -} - -* Marvell Berlin CPU control bindings - -CPU control register allows various operations on CPUs, like resetting them -independently. - -Required properties: -- compatible: should be "marvell,berlin-cpu-ctrl" -- reg: address and length of the register set - -Example: - -cpu-ctrl@f7dd0000 { - compatible = "marvell,berlin-cpu-ctrl"; - reg = <0xf7dd0000 0x10000>; -}; - -* Marvell Berlin2 chip control binding - -Marvell Berlin SoCs have a chip control register set providing several -individual registers dealing with pinmux, padmux, clock, reset, and secondary -CPU boot address. Unfortunately, the individual registers are spread among the -chip control registers, so there should be a single DT node only providing the -different functions which are described below. - -Required properties: -- compatible: - * the first and second values must be: - "simple-mfd", "syscon" -- reg: address and length of following register sets for - BG2/BG2CD: chip control register set - BG2Q: chip control register set and cpu pll registers - -* Marvell Berlin2 system control binding - -Marvell Berlin SoCs have a system control register set providing several -individual registers dealing with pinmux, padmux, and reset. - -Required properties: -- compatible: - * the first and second values must be: - "simple-mfd", "syscon" -- reg: address and length of the system control register set - -Example: - -chip: chip-control@ea0000 { - compatible = "simple-mfd", "syscon"; - reg = <0xea0000 0x400>; - - /* sub-device nodes */ -}; - -sysctrl: system-controller@d000 { - compatible = "simple-mfd", "syscon"; - reg = <0xd000 0x100>; - - /* sub-device nodes */ -}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt @@ -10,6 +10,7 @@ Required Properties: - "mediatek,mt2712-apmixedsys", "syscon" - "mediatek,mt6797-apmixedsys" - "mediatek,mt7622-apmixedsys" + - "mediatek,mt7623-apmixedsys", "mediatek,mt2701-apmixedsys" - "mediatek,mt8135-apmixedsys" - "mediatek,mt8173-apmixedsys" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt @@ -8,6 +8,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-audsys", "syscon" - "mediatek,mt7622-audsys", "syscon" + - "mediatek,mt7623-audsys", "mediatek,mt2701-audsys", "syscon" - #clock-cells: Must be 1 The AUDSYS controller uses the common clk binding from diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt @@ -8,6 +8,7 @@ Required Properties: - compatible: Should be: - "mediatek,mt2701-bdpsys", "syscon" - "mediatek,mt2712-bdpsys", "syscon" + - "mediatek,mt7623-bdpsys", "mediatek,mt2701-bdpsys", "syscon" - #clock-cells: Must be 1 The bdpsys controller uses the common clk binding from diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt @@ -8,6 +8,7 @@ Required Properties: - compatible: Should be: - "mediatek,mt2701-ethsys", "syscon" - "mediatek,mt7622-ethsys", "syscon" + - "mediatek,mt7623-ethsys", "mediatek,mt2701-ethsys", "syscon" - #clock-cells: Must be 1 - #reset-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt @@ -9,6 +9,7 @@ Required Properties: - compatible: Should be: - "mediatek,mt2701-hifsys", "syscon" - "mediatek,mt7622-hifsys", "syscon" + - "mediatek,mt7623-hifsys", "mediatek,mt2701-hifsys", "syscon" - #clock-cells: Must be 1 The hifsys controller uses the common clk binding from diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt @@ -9,6 +9,7 @@ Required Properties: - "mediatek,mt2701-imgsys", "syscon" - "mediatek,mt2712-imgsys", "syscon" - "mediatek,mt6797-imgsys", "syscon" + - "mediatek,mt7623-imgsys", "mediatek,mt2701-imgsys", "syscon" - "mediatek,mt8173-imgsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt @@ -11,6 +11,7 @@ Required Properties: - "mediatek,mt2712-infracfg", "syscon" - "mediatek,mt6797-infracfg", "syscon" - "mediatek,mt7622-infracfg", "syscon" + - "mediatek,mt7623-infracfg", "mediatek,mt2701-infracfg", "syscon" - "mediatek,mt8135-infracfg", "syscon" - "mediatek,mt8173-infracfg", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt @@ -9,6 +9,7 @@ Required Properties: - "mediatek,mt2701-mmsys", "syscon" - "mediatek,mt2712-mmsys", "syscon" - "mediatek,mt6797-mmsys", "syscon" + - "mediatek,mt7623-mmsys", "mediatek,mt2701-mmsys", "syscon" - "mediatek,mt8173-mmsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt @@ -10,6 +10,7 @@ Required Properties: - "mediatek,mt2701-pericfg", "syscon" - "mediatek,mt2712-pericfg", "syscon" - "mediatek,mt7622-pericfg", "syscon" + - "mediatek,mt7623-pericfg", "mediatek,mt2701-pericfg", "syscon" - "mediatek,mt8135-pericfg", "syscon" - "mediatek,mt8173-pericfg", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt @@ -10,6 +10,7 @@ Required Properties: - "mediatek,mt2712-topckgen", "syscon" - "mediatek,mt6797-topckgen" - "mediatek,mt7622-topckgen" + - "mediatek,mt7623-topckgen", "mediatek,mt2701-topckgen" - "mediatek,mt8135-topckgen" - "mediatek,mt8173-topckgen" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt @@ -9,6 +9,7 @@ Required Properties: - "mediatek,mt2701-vdecsys", "syscon" - "mediatek,mt2712-vdecsys", "syscon" - "mediatek,mt6797-vdecsys", "syscon" + - "mediatek,mt7623-vdecsys", "mediatek,mt2701-vdecsys", "syscon" - "mediatek,mt8173-vdecsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt @@ -5,6 +5,10 @@ Rockchip platforms device tree bindings Required root node properties: - compatible = "vamrs,ficus", "rockchip,rk3399"; +- 96boards RK3399 Rock960 (ROCK960 Consumer Edition) + Required root node properties: + - compatible = "vamrs,rock960", "rockchip,rk3399"; + - Amarula Vyasa RK3288 board Required root node properties: - compatible = "amarula,vyasa-rk3288", "rockchip,rk3288"; @@ -13,6 +17,10 @@ Rockchip platforms device tree bindings Required root node properties: - compatible = "asus,rk3288-tinker", "rockchip,rk3288"; +- Asus Tinker board S + Required root node properties: + - compatible = "asus,rk3288-tinker-s", "rockchip,rk3288"; + - Kylin RK3036 board: Required root node properties: - compatible = "rockchip,kylin-rk3036", "rockchip,rk3036"; @@ -59,6 +67,10 @@ Rockchip platforms device tree bindings Required root node properties: - compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328"; +- Firefly ROC-RK3399-PC board: + Required root node properties: + - compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399"; + - ChipSPARK PopMetal-RK3288 board: Required root node properties: - compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288"; @@ -160,6 +172,10 @@ Rockchip platforms device tree bindings Required root node properties: - compatible = "pine64,rock64", "rockchip,rk3328"; +- Pine64 RockPro64 board: + Required root node properties: + - compatible = "pine64,rockpro64", "rockchip,rk3399"; + - Rockchip PX3 Evaluation board: Required root node properties: - compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188"; @@ -168,6 +184,10 @@ Rockchip platforms device tree bindings Required root node properties: - compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368"; +- Rockchip PX30 Evaluation board: + Required root node properties: + - compatible = "rockchip,px30-evb", "rockchip,px30"; + - Rockchip RV1108 Evaluation board Required root node properties: - compatible = "rockchip,rv1108-evb", "rockchip,rv1108"; diff --git a/Documentation/devicetree/bindings/arm/scu.txt b/Documentation/devicetree/bindings/arm/scu.txt @@ -22,7 +22,7 @@ References: Example: -scu@a04100000 { +scu@a0410000 { compatible = "arm,cortex-a9-scu"; reg = <0xa0410000 0x100>; }; diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt @@ -7,6 +7,8 @@ SoCs: compatible = "renesas,emev2" - RZ/A1H (R7S72100) compatible = "renesas,r7s72100" + - RZ/A2 (R7S9210) + compatible = "renesas,r7s9210" - SH-Mobile AG5 (R8A73A00/SH73A0) compatible = "renesas,sh73a0" - R-Mobile APE6 (R8A73A40) @@ -23,6 +25,10 @@ SoCs: compatible = "renesas,r8a7745" - RZ/G1C (R8A77470) compatible = "renesas,r8a77470" + - RZ/G2M (R8A774A1) + compatible = "renesas,r8a774a1" + - RZ/G2E (RA8774C0) + compatible = "renesas,r8a774c0" - R-Car M1A (R8A77781) compatible = "renesas,r8a7778" - R-Car H1 (R8A77790) @@ -107,6 +113,8 @@ Boards: compatible = "renesas,lager", "renesas,r8a7790" - M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKBX0010SA09 (M3 ES1.0)) compatible = "renesas,m3ulcb", "renesas,r8a7796" + - M3NULCB (R-Car Starter Kit Pro, RTP0RC77965SKBX010SA00 (M3-N ES1.1)) + compatible = "renesas,m3nulcb", "renesas,r8a77965" - Marzen (R0P7779A00010S) compatible = "renesas,marzen", "renesas,r8a7779" - Porter (M2-LCDP) @@ -143,12 +151,12 @@ Boards: compatible = "renesas,wheat", "renesas,r8a7792" -Most Renesas ARM SoCs have a Product Register that allows to retrieve SoC -product and revision information. If present, a device node for this register -should be added. +Most Renesas ARM SoCs have a Product Register or Boundary Scan ID Register that +allows to retrieve SoC product and revision information. If present, a device +node for this register should be added. Required properties: - - compatible: Must be "renesas,prr". + - compatible: Must be "renesas,prr" or "renesas,bsid" - reg: Base address and length of the register block. diff --git a/Documentation/devicetree/bindings/arm/syna.txt b/Documentation/devicetree/bindings/arm/syna.txt @@ -0,0 +1,105 @@ +Synaptics SoC Device Tree Bindings + +According to https://www.synaptics.com/company/news/conexant-marvell +Synaptics has acquired the Multimedia Solutions Business of Marvell, so +berlin SoCs are now Synaptics' SoCs now. + +--------------------------------------------------------------- + +Work in progress statement: + +Device tree files and bindings applying to Marvell Berlin SoCs and boards are +considered "unstable". Any Marvell Berlin device tree binding may change at any +time. Be sure to use a device tree binary and a kernel image generated from the +same source tree. + +Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a +stable binding/ABI. + +--------------------------------------------------------------- + +Boards with the Synaptics AS370 SoC shall have the following properties: + Required root node property: + compatible: "syna,as370" + +Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500 +shall have the following properties: + +* Required root node properties: +compatible: must contain "marvell,berlin" + +In addition, the above compatible shall be extended with the specific +SoC and board used. Currently known SoC compatibles are: + "marvell,berlin2" for Marvell Armada 1500 (BG2, 88DE3100), + "marvell,berlin2cd" for Marvell Armada 1500-mini (BG2CD, 88DE3005) + "marvell,berlin2ct" for Marvell Armada ? (BG2CT, 88DE????) + "marvell,berlin2q" for Marvell Armada 1500-pro (BG2Q, 88DE3114) + "marvell,berlin3" for Marvell Armada ? (BG3, 88DE????) + +* Example: + +/ { + model = "Sony NSZ-GS7"; + compatible = "sony,nsz-gs7", "marvell,berlin2", "marvell,berlin"; + + ... +} + +* Marvell Berlin CPU control bindings + +CPU control register allows various operations on CPUs, like resetting them +independently. + +Required properties: +- compatible: should be "marvell,berlin-cpu-ctrl" +- reg: address and length of the register set + +Example: + +cpu-ctrl@f7dd0000 { + compatible = "marvell,berlin-cpu-ctrl"; + reg = <0xf7dd0000 0x10000>; +}; + +* Marvell Berlin2 chip control binding + +Marvell Berlin SoCs have a chip control register set providing several +individual registers dealing with pinmux, padmux, clock, reset, and secondary +CPU boot address. Unfortunately, the individual registers are spread among the +chip control registers, so there should be a single DT node only providing the +different functions which are described below. + +Required properties: +- compatible: + * the first and second values must be: + "simple-mfd", "syscon" +- reg: address and length of following register sets for + BG2/BG2CD: chip control register set + BG2Q: chip control register set and cpu pll registers + +* Marvell Berlin2 system control binding + +Marvell Berlin SoCs have a system control register set providing several +individual registers dealing with pinmux, padmux, and reset. + +Required properties: +- compatible: + * the first and second values must be: + "simple-mfd", "syscon" +- reg: address and length of the system control register set + +Example: + +chip: chip-control@ea0000 { + compatible = "simple-mfd", "syscon"; + reg = <0xea0000 0x400>; + + /* sub-device nodes */ +}; + +sysctrl: system-controller@d000 { + compatible = "simple-mfd", "syscon"; + reg = <0xd000 0x100>; + + /* sub-device nodes */ +}; diff --git a/Documentation/devicetree/bindings/arm/tegra.txt b/Documentation/devicetree/bindings/arm/tegra.txt @@ -47,12 +47,17 @@ board-specific compatible values: nvidia,ventana toradex,apalis_t30 toradex,apalis_t30-eval + toradex,apalis_t30-v1.1 + toradex,apalis_t30-v1.1-eval toradex,apalis-tk1 toradex,apalis-tk1-eval - toradex,colibri_t20-512 + toradex,apalis-tk1-v1.2 + toradex,apalis-tk1-v1.2-eval + toradex,colibri_t20 + toradex,colibri_t20-eval-v3 + toradex,colibri_t20-iris toradex,colibri_t30 toradex,colibri_t30-eval-v3 - toradex,iris Trusted Foundations ------------------------------------------- diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt @@ -34,3 +34,96 @@ Board DTS: pmc@c360000 { nvidia,invert-interrupt; }; + +== Pad Control == + +On Tegra SoCs a pad is a set of pins which are configured as a group. +The pin grouping is a fixed attribute of the hardware. The PMC can be +used to set pad power state and signaling voltage. A pad can be either +in active or power down mode. The support for power state and signaling +voltage configuration varies depending on the pad in question. 3.3 V and +1.8 V signaling voltages are supported on pins where software +controllable signaling voltage switching is available. + +Pad configurations are described with pin configuration nodes which +are placed under the pmc node and they are referred to by the pinctrl +client properties. For more information see +Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt. + +The following pads are present on Tegra186: +csia csib dsi mipi-bias +pex-clk-bias pex-clk3 pex-clk2 pex-clk1 +usb0 usb1 usb2 usb-bias +uart audio hsic dbg +hdmi-dp0 hdmi-dp1 pex-cntrl sdmmc2-hv +sdmmc4 cam dsib dsic +dsid csic csid csie +dsif spi ufs dmic-hv +edp sdmmc1-hv sdmmc3-hv conn +audio-hv ao-hv + +Required pin configuration properties: + - pins: A list of strings, each of which contains the name of a pad + to be configured. + +Optional pin configuration properties: + - low-power-enable: Configure the pad into power down mode + - low-power-disable: Configure the pad into active mode + - power-source: Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or + TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages. + The values are defined in + include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h. + +Note: The power state can be configured on all of the above pads except + for ao-hv. Following pads have software configurable signaling + voltages: sdmmc2-hv, dmic-hv, sdmmc1-hv, sdmmc3-hv, audio-hv, + ao-hv. + +Pad configuration state example: + pmc: pmc@7000e400 { + compatible = "nvidia,tegra186-pmc"; + reg = <0 0x0c360000 0 0x10000>, + <0 0x0c370000 0 0x10000>, + <0 0x0c380000 0 0x10000>, + <0 0x0c390000 0 0x10000>; + reg-names = "pmc", "wake", "aotag", "scratch"; + + ... + + sdmmc1_3v3: sdmmc1-3v3 { + pins = "sdmmc1-hv"; + power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; + }; + + sdmmc1_1v8: sdmmc1-1v8 { + pins = "sdmmc1-hv"; + power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; + }; + + hdmi_off: hdmi-off { + pins = "hdmi"; + low-power-enable; + } + + hdmi_on: hdmi-on { + pins = "hdmi"; + low-power-disable; + } + }; + +Pinctrl client example: + sdmmc1: sdhci@3400000 { + ... + pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; + pinctrl-0 = <&sdmmc1_3v3>; + pinctrl-1 = <&sdmmc1_1v8>; + }; + + ... + + sor0: sor@15540000 { + ... + pinctrl-0 = <&hdmi_off>; + pinctrl-1 = <&hdmi_on>; + pinctrl-names = "hdmi-on", "hdmi-off"; + }; diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt @@ -195,3 +195,106 @@ Example: power-domains = <&pd_audio>; ... }; + +== Pad Control == + +On Tegra SoCs a pad is a set of pins which are configured as a group. +The pin grouping is a fixed attribute of the hardware. The PMC can be +used to set pad power state and signaling voltage. A pad can be either +in active or power down mode. The support for power state and signaling +voltage configuration varies depending on the pad in question. 3.3 V and +1.8 V signaling voltages are supported on pins where software +controllable signaling voltage switching is available. + +The pad configuration state nodes are placed under the pmc node and they +are referred to by the pinctrl client properties. For more information +see Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt. +The pad name should be used as the value of the pins property in pin +configuration nodes. + +The following pads are present on Tegra124 and Tegra132: +audio bb cam comp +csia csb cse dsi +dsib dsic dsid hdmi +hsic hv lvds mipi-bias +nand pex-bias pex-clk1 pex-clk2 +pex-cntrl sdmmc1 sdmmc3 sdmmc4 +sys_ddc uart usb0 usb1 +usb2 usb_bias + +The following pads are present on Tegra210: +audio audio-hv cam csia +csib csic csid csie +csif dbg debug-nonao dmic +dp dsi dsib dsic +dsid emmc emmc2 gpio +hdmi hsic lvds mipi-bias +pex-bias pex-clk1 pex-clk2 pex-cntrl +sdmmc1 sdmmc3 spi spi-hv +uart usb0 usb1 usb2 +usb3 usb-bias + +Required pin configuration properties: + - pins: Must contain name of the pad(s) to be configured. + +Optional pin configuration properties: + - low-power-enable: Configure the pad into power down mode + - low-power-disable: Configure the pad into active mode + - power-source: Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 + or TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages. + The values are defined in + include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h. + +Note: The power state can be configured on all of the Tegra124 and + Tegra132 pads. None of the Tegra124 or Tegra132 pads support + signaling voltage switching. + +Note: All of the listed Tegra210 pads except pex-cntrl support power + state configuration. Signaling voltage switching is supported on + following Tegra210 pads: audio, audio-hv, cam, dbg, dmic, gpio, + pex-cntrl, sdmmc1, sdmmc3, spi, spi-hv, and uart. + +Pad configuration state example: + pmc: pmc@7000e400 { + compatible = "nvidia,tegra210-pmc"; + reg = <0x0 0x7000e400 0x0 0x400>; + clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>; + clock-names = "pclk", "clk32k_in"; + + ... + + sdmmc1_3v3: sdmmc1-3v3 { + pins = "sdmmc1"; + power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; + }; + + sdmmc1_1v8: sdmmc1-1v8 { + pins = "sdmmc1"; + power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; + }; + + hdmi_off: hdmi-off { + pins = "hdmi"; + low-power-enable; + } + + hdmi_on: hdmi-on { + pins = "hdmi"; + low-power-disable; + } + }; + +Pinctrl client example: + sdmmc1: sdhci@700b0000 { + ... + pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; + pinctrl-0 = <&sdmmc1_3v3>; + pinctrl-1 = <&sdmmc1_1v8>; + }; + ... + sor@54540000 { + ... + pinctrl-0 = <&hdmi_off>; + pinctrl-1 = <&hdmi_on>; + pinctrl-names = "hdmi-on", "hdmi-off"; + }; diff --git a/Documentation/devicetree/bindings/arm/ux500/boards.txt b/Documentation/devicetree/bindings/arm/ux500/boards.txt @@ -60,7 +60,7 @@ Example: <0xa0410100 0x100>; }; - scu@a04100000 { + scu@a0410000 { compatible = "arm,cortex-a9-scu"; reg = <0xa0410000 0x100>; }; diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt @@ -6,6 +6,14 @@ Required properties: - interrupts: Should contain CCM interrupt - #clock-cells: Should be <1> +Optional properties: +- fsl,pmic-stby-poweroff: Configure CCM to assert PMIC_STBY_REQ signal + on power off. + Use this property if the SoC should be powered off by external power + management IC (PMIC) triggered via PMIC_STBY_REQ signal. + Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should + be using "syscon-poweroff" driver instead. + The clock consumer should specify the desired clock by having the clock ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6qdl-clock.h for the full list of i.MX6 Quad and DualLite clock IDs. diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt @@ -41,6 +41,8 @@ Required properties: - compatible : must be one of the following string: "mediatek,mt2701-m4u" for mt2701 which uses generation one m4u HW. "mediatek,mt2712-m4u" for mt2712 which uses generation two m4u HW. + "mediatek,mt7623-m4u", "mediatek,mt2701-m4u" for mt7623 which uses + generation one m4u HW. "mediatek,mt8173-m4u" for mt8173 which uses generation two m4u HW. - reg : m4u register base and size. - interrupts : the interrupt of m4u. @@ -51,7 +53,7 @@ Required properties: according to the local arbiter index, like larb0, larb1, larb2... - iommu-cells : must be 1. This is the mtk_m4u_id according to the HW. Specifies the mtk_m4u_id as defined in - dt-binding/memory/mt2701-larb-port.h for mt2701, + dt-binding/memory/mt2701-larb-port.h for mt2701, mt7623 dt-binding/memory/mt2712-larb-port.h for mt2712, and dt-binding/memory/mt8173-larb-port.h for mt8173. diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt @@ -5,6 +5,7 @@ Mediatek JPEG Decoder is the JPEG decode hardware present in Mediatek SoCs Required properties: - compatible : must be one of the following string: "mediatek,mt8173-jpgdec" + "mediatek,mt7623-jpgdec", "mediatek,mt2701-jpgdec" "mediatek,mt2701-jpgdec" - reg : physical base address of the jpeg decoder registers and length of memory mapped region. diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt @@ -17,6 +17,7 @@ Required properties: - compatible : must be one of : "mediatek,mt2701-smi-common" "mediatek,mt2712-smi-common" + "mediatek,mt7623-smi-common", "mediatek,mt2701-smi-common" "mediatek,mt8173-smi-common" - reg : the register and size of the SMI block. - power-domains : a phandle to the power domain of this local arbiter. diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt @@ -6,6 +6,7 @@ Required properties: - compatible : must be one of : "mediatek,mt2701-smi-larb" "mediatek,mt2712-smi-larb" + "mediatek,mt7623-smi-larb", "mediatek,mt2701-smi-larb" "mediatek,mt8173-smi-larb" - reg : the register and size of this local arbiter. - mediatek,smi : a phandle to the smi_common node. @@ -16,7 +17,7 @@ Required properties: the register. - "smi" : It's the clock for transfer data and command. -Required property for mt2701 and mt2712: +Required property for mt2701, mt2712 and mt7623: - mediatek,larb-id :the hardware id of this larb. Example: diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt @@ -46,6 +46,42 @@ Required properties: "brcm,bcm6328-switch" "brcm,bcm6368-switch" and the mandatory "brcm,bcm63xx-switch" +Required properties for BCM585xx/586xx/88312 SoCs: + + - reg: a total of 3 register base addresses, the first one must be the + Switch Register Access block base, the second is the port 5/4 mux + configuration register and the third one is the SGMII configuration + and status register base address. + + - interrupts: a total of 13 interrupts must be specified, in the following + order: port 0-5, 7-8 link status change, then the integrated PHY interrupt, + then the timestamping interrupt and the sleep timer interrupts for ports + 5,7,8. + +Optional properties for BCM585xx/586xx/88312 SoCs: + + - reg-names: a total of 3 names matching the 3 base register address, must + be in the following order: + "srab" + "mux_config" + "sgmii_config" + + - interrupt-names: a total of 13 names matching the 13 interrupts specified + must be in the following order: + "link_state_p0" + "link_state_p1" + "link_state_p2" + "link_state_p3" + "link_state_p4" + "link_state_p5" + "link_state_p7" + "link_state_p8" + "phy" + "ts" + "imp_sleep_timer_p5" + "imp_sleep_timer_p7" + "imp_sleep_timer_p8" + See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional required and optional properties. diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt @@ -7,6 +7,7 @@ Required properties: "allwinner,sun8i-a83t-sid" "allwinner,sun8i-h3-sid" "allwinner,sun50i-a64-sid" + "allwinner,sun50i-h5-sid" - reg: Should contain registers location and length diff --git a/Documentation/devicetree/bindings/power/actions,owl-sps.txt b/Documentation/devicetree/bindings/power/actions,owl-sps.txt @@ -3,11 +3,13 @@ Actions Semi Owl Smart Power System (SPS) Required properties: - compatible : "actions,s500-sps" for S500 "actions,s700-sps" for S700 + "actions,s900-sps" for S900 - reg : Offset and length of the register set for the device. - #power-domain-cells : Must be 1. See macros in: include/dt-bindings/power/owl-s500-powergate.h for S500 include/dt-bindings/power/owl-s700-powergate.h for S700 + include/dt-bindings/power/owl-s900-powergate.h for S900 Example: diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.txt b/Documentation/devicetree/bindings/soc/rockchip/grf.txt @@ -13,6 +13,7 @@ On RK3328 SoCs, the GRF adds a section for USB2PHYGRF, Required Properties: - compatible: GRF should be one of the following: + - "rockchip,px30-grf", "syscon": for px30 - "rockchip,rk3036-grf", "syscon": for rk3036 - "rockchip,rk3066-grf", "syscon": for rk3066 - "rockchip,rk3188-grf", "syscon": for rk3188 @@ -23,6 +24,7 @@ Required Properties: - "rockchip,rk3399-grf", "syscon": for rk3399 - "rockchip,rv1108-grf", "syscon": for rv1108 - compatible: PMUGRF should be one of the following: + - "rockchip,px30-pmugrf", "syscon": for px30 - "rockchip,rk3368-pmugrf", "syscon": for rk3368 - "rockchip,rk3399-pmugrf", "syscon": for rk3399 - compatible: SGRF should be one of the following diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt @@ -6,6 +6,7 @@ Required properties: - brcm,bcm2835-usb: The DWC2 USB controller instance in the BCM2835 SoC. - hisilicon,hi6220-usb: The DWC2 USB controller instance in the hi6220 SoC. - rockchip,rk3066-usb: The DWC2 USB controller instance in the rk3066 Soc; + - "rockchip,px30-usb", "rockchip,rk3066-usb", "snps,dwc2": for px30 Soc; - "rockchip,rk3188-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3188 Soc; - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc; - "lantiq,arx100-usb": The DWC2 USB controller instance in Lantiq ARX SoCs; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -115,6 +115,7 @@ elan Elan Microelectronic Corp. embest Shenzhen Embest Technology Co., Ltd. emmicro EM Microelectronic emtrion emtrion GmbH +endless Endless Mobile, Inc. energymicro Silicon Laboratories (formerly Energy Micro AS) engicam Engicam S.r.l. epcos EPCOS AG @@ -301,6 +302,7 @@ pine64 Pine64 pixcir PIXCIR MICROELECTRONICS Co., Ltd plathome Plat'Home Co., Ltd. plda PLDA +plx Broadcom Corporation (formerly PLX Technology) portwell Portwell Inc. poslab Poslab Technology Co., Ltd. powervr PowerVR (deprecated, use img) diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile @@ -81,6 +81,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ bcm2836-rpi-2-b.dtb \ bcm2837-rpi-3-b.dtb \ bcm2837-rpi-3-b-plus.dtb \ + bcm2837-rpi-cm3-io3.dtb \ bcm2835-rpi-zero.dtb \ bcm2835-rpi-zero-w.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += \ @@ -321,6 +322,7 @@ dtb-$(CONFIG_MACH_MESON6) += \ meson6-atv1200.dtb dtb-$(CONFIG_MACH_MESON8) += \ meson8-minix-neo-x8.dtb \ + meson8b-ec100.dtb \ meson8b-mxq.dtb \ meson8b-odroidc1.dtb \ meson8m2-mxiii-plus.dtb @@ -548,6 +550,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-14x14-evk.dtb \ imx6ul-ccimx6ulsbcexpress.dtb \ + imx6ul-ccimx6ulsbcpro.dtb \ imx6ul-geam.dtb \ imx6ul-isiot-emmc.dtb \ imx6ul-isiot-nand.dtb \ @@ -559,7 +562,8 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-tx6ul-mainboard.dtb \ imx6ull-14x14-evk.dtb \ imx6ull-colibri-eval-v3.dtb \ - imx6ull-colibri-wifi-eval-v3.dtb + imx6ull-colibri-wifi-eval-v3.dtb \ + imx6ulz-14x14-evk.dtb dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-cl-som-imx7.dtb \ imx7d-colibri-emmc-eval-v3.dtb \ @@ -649,6 +653,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ omap3-gta04a3.dtb \ omap3-gta04a4.dtb \ omap3-gta04a5.dtb \ + omap3-gta04a5one.dtb \ omap3-ha.dtb \ omap3-ha-lcd.dtb \ omap3-igep0020.dtb \ @@ -706,6 +711,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-evmsk.dtb \ am335x-icev2.dtb \ am335x-lxm.dtb \ + am335x-moxa-uc-2101.dtb \ am335x-moxa-uc-8100-me-t.dtb \ am335x-nano.dtb \ am335x-pdu001.dtb \ @@ -864,6 +870,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-r89.dtb \ rk3288-rock2-square.dtb \ rk3288-tinker.dtb \ + rk3288-tinker-s.dtb \ rk3288-veyron-brain.dtb \ rk3288-veyron-jaq.dtb \ rk3288-veyron-jerry.dtb \ @@ -892,7 +899,7 @@ dtb-$(CONFIG_ARCH_SOCFPGA) += \ socfpga_arria10_socdk_sdmmc.dtb \ socfpga_cyclone5_mcvevk.dtb \ socfpga_cyclone5_socdk.dtb \ - socfpga_cyclone5_de0_sockit.dtb \ + socfpga_cyclone5_de0_nano_soc.dtb \ socfpga_cyclone5_sockit.dtb \ socfpga_cyclone5_socrates.dtb \ socfpga_cyclone5_sodia.dtb \ @@ -1033,6 +1040,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h2-plus-orangepi-r1.dtb \ sun8i-h2-plus-orangepi-zero.dtb \ sun8i-h3-bananapi-m2-plus.dtb \ + sun8i-h3-bananapi-m2-plus-v1.2.dtb \ sun8i-h3-beelink-x2.dtb \ sun8i-h3-libretech-all-h3-cc.dtb \ sun8i-h3-nanopi-m1.dtb \ @@ -1046,6 +1054,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h3-orangepi-pc-plus.dtb \ sun8i-h3-orangepi-plus.dtb \ sun8i-h3-orangepi-plus2e.dtb \ + sun8i-h3-orangepi-zero-plus2.dtb \ sun8i-r16-bananapi-m2m.dtb \ sun8i-r16-nintendo-nes-classic.dtb \ sun8i-r16-nintendo-super-nes-classic.dtb \ @@ -1061,6 +1070,7 @@ dtb-$(CONFIG_ARCH_TANGO) += \ tango4-vantage-1172.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \ tegra20-harmony.dtb \ + tegra20-colibri-eval-v3.dtb \ tegra20-colibri-iris.dtb \ tegra20-medcom-wide.dtb \ tegra20-paz00.dtb \ @@ -1071,6 +1081,7 @@ dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \ tegra20-ventana.dtb dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \ tegra30-apalis-eval.dtb \ + tegra30-apalis-v1.1-eval.dtb \ tegra30-beaver.dtb \ tegra30-cardhu-a02.dtb \ tegra30-cardhu-a04.dtb \ @@ -1149,6 +1160,7 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \ dtb-$(CONFIG_MACH_ARMADA_375) += \ armada-375-db.dtb dtb-$(CONFIG_MACH_ARMADA_38X) += \ + armada-385-db-88f6820-amc.dtb \ armada-385-db-ap.dtb \ armada-385-linksys-caiman.dtb \ armada-385-linksys-cobra.dtb \ @@ -1199,6 +1211,8 @@ dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-ast2500-evb.dtb \ aspeed-bmc-arm-centriq2400-rep.dtb \ + aspeed-bmc-arm-stardragon4800-rep2.dtb \ + aspeed-bmc-facebook-tiogapass.dtb \ aspeed-bmc-intel-s2600wf.dtb \ aspeed-bmc-opp-lanyang.dtb \ aspeed-bmc-opp-palmetto.dtb \ diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -379,7 +379,7 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <&ethphy0>; phy-mode = "mii"; }; @@ -396,6 +396,10 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; }; &mmc1 { diff --git a/arch/arm/boot/dts/am335x-boneblack-common.dtsi b/arch/arm/boot/dts/am335x-boneblack-common.dtsi @@ -7,6 +7,7 @@ */ #include <dt-bindings/display/tda998x.h> +#include <dt-bindings/interrupt-controller/irq.h> &ldo3_reg { regulator-min-microvolt = <1800000>; @@ -88,9 +89,11 @@ }; &i2c0 { - tda19988: tda19988 { + tda19988: tda19988@70 { compatible = "nxp,tda998x"; reg = <0x70>; + nxp,calib-gpios = <&gpio1 25 0>; + interrupts-extended = <&gpio1 25 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default", "off"; pinctrl-0 = <&nxp_hdmi_bonelt_pins>; diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts @@ -140,10 +140,14 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <&ethphy0>; phy-mode = "rmii"; }; diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts @@ -486,10 +486,14 @@ status = "okay"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <&ethphy0>; phy-mode = "rgmii-txid"; }; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts @@ -713,6 +713,7 @@ pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; status = "okay"; + slaves = <1>; }; &davinci_mdio { @@ -720,15 +721,14 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; -}; -&cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; - phy-mode = "rgmii-txid"; + ethphy0: ethernet-phy@0 { + reg = <0>; + }; }; -&cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; +&cpsw_emac0 { + phy-handle = <&ethphy0>; phy-mode = "rgmii-txid"; }; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts @@ -639,16 +639,24 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <&ethphy0>; phy-mode = "rgmii-txid"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <&ethphy1>; phy-mode = "rgmii-txid"; dual_emac_res_vlan = <2>; }; diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -102,15 +102,24 @@ &davinci_mdio { status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <&ethphy0>; phy-mode = "rmii"; + }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <&ethphy1>; phy-mode = "rmii"; }; diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts @@ -317,13 +317,13 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <5>; + phy-handle = <&ethphy0>; phy-mode = "rmii"; dual_emac_res_vlan = <2>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <4>; + phy-handle = <&ethphy1>; phy-mode = "rmii"; dual_emac_res_vlan = <3>; }; @@ -345,6 +345,14 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; + + ethphy0: ethernet-phy@5 { + reg = <5>; + }; + + ethphy1: ethernet-phy@4 { + reg = <4>; + }; }; &mmc1 { diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi @@ -0,0 +1,249 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 MOXA Inc. - https://www.moxa.com/ + * + * Authors: SZ Lin (林上智) <sz.lin@moxa.com> + * Wes Huang (黃淵河) <wes.huang@moxa.com> + * Fero JD Zhou (周俊達) <FeroJD.Zhou@moxa.com> + */ + +#include "am33xx.dtsi" + +/ { + vbat: vbat-regulator { + compatible = "regulator-fixed"; + }; + + /* Power supply provides a fixed 3.3V @3A */ + vmmcsd_fixed: vmmcsd-regulator { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + buttons: push_button { + compatible = "gpio-keys"; + }; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + push_button_pins: pinmux_push_button { + pinctrl-single,pins = < + AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2_23 */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + mmc1_pins_default: pinmux_mmc1_pins { + pinctrl-single,pins = < + /* eMMC */ + AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad12.mmc1_dat0 */ + AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad13.mmc1_dat1 */ + AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad14.mmc1_dat2 */ + AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad15.mmc1_dat3 */ + AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad8.mmc1_dat4 */ + AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad9.mmc1_dat5 */ + AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad10.mmc1_dat6 */ + AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad11.mmc1_dat7 */ + AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + >; + }; + + spi0_pins: pinmux_spi0 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */ + AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */ + AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */ + AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */ + >; + }; +}; + +&uart0 { + /* Console */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + + eeprom: eeprom@50 { + compatible = "atmel,24c16"; + pagesize = <16>; + reg = <0x50>; + }; + + rtc_wdt: rtc_wdt@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +&cppi41dma { + status = "okay"; +}; + +/* Power */ +&vbat { + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; +}; + +&mac { + pinctrl-names = "default"; + pinctrl-0 = <&cpsw_default>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&davinci_mdio_default>; + status = "okay"; +}; + +&cpsw_emac0 { + status = "okay"; +}; + +&cpsw_emac1 { + status = "okay"; +}; + +&phy_sel { + reg= <0x44e10650 0xf5>; + rmii-clock-ext; +}; + +&sham { + status = "okay"; +}; + +&aes { + status = "okay"; +}; + +&gpio0 { + ti,no-reset-on-init; +}; + +&mmc2 { + pinctrl-names = "default"; + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <8>; + pinctrl-0 = <&mmc1_pins_default>; + ti,non-removable; + status = "okay"; +}; + +&buttons { + pinctrl-names = "default"; + pinctrl-0 = <&push_button_pins>; + #address-cells = <1>; + #size-cells = <0>; + + button@0 { + label = "push_button"; + linux,code = <0x100>; + gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + }; +}; + +/* SPI Busses */ +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + + m25p80@0 { + compatible = "mx25l6405d"; + spi-max-frequency = <40000000>; + + reg = <0>; + spi-cpol; + spi-cpha; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + /* reg : The partition's offset and size within the mtd bank. */ + partitions@0 { + label = "MLO"; + reg = <0x0 0x80000>; + }; + + partitions@1 { + label = "U-Boot"; + reg = <0x80000 0x100000>; + }; + + partitions@2 { + label = "U-Boot Env"; + reg = <0x180000 0x40000>; + }; + }; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + + tpm_spi_tis@0 { + compatible = "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <500000>; + }; +}; diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2101.dts b/arch/arm/boot/dts/am335x-moxa-uc-2101.dts @@ -0,0 +1,69 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 MOXA Inc. - https://www.moxa.com/ + * + * Authors: SZ Lin (林上智) <sz.lin@moxa.com> + * Wes Huang (黃淵河) <wes.huang@moxa.com> + * Fero JD Zhou (周俊達) <FeroJD.Zhou@moxa.com> + */ + +/dts-v1/; + +#include "am335x-moxa-uc-2100-common.dtsi" + +/ { + model = "Moxa UC-2101"; + compatible = "moxa,uc-2101", "ti,am33xx"; + + leds { + compatible = "gpio-leds"; + led1 { + label = "UC2100:GREEN:USER"; + gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ + AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ + AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */ + AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ + AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ + AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ + AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mii1_refclk.rmii1_refclk */ + >; + }; + + spi1_pins: pinmux_spi1 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE4) /* ecap0_in_pwm0_out.spi1_sclk */ + AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE4) /* uart1_ctsn.spi1_cs0 */ + AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE4) /* uart0_ctsn.spi1_d0 */ + AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE4) /* uart0_rtsn.spi1_d1 */ + >; + }; +}; + +&davinci_mdio { + phy0: ethernet-phy@4 { + reg = <4>; + }; +}; + +&cpsw_emac0 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rmii"; +}; + +&cpsw_emac1 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts @@ -422,18 +422,26 @@ pinctrl-names = "default"; pinctrl-0 = <&davinci_mdio_default>; status = "okay"; + + ethphy0: ethernet-phy@4 { + reg = <4>; + }; + + ethphy1: ethernet-phy@5 { + reg = <5>; + }; }; &cpsw_emac0 { status = "okay"; - phy_id = <&davinci_mdio>, <4>; + phy-handle = <&ethphy0>; phy-mode = "rmii"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { status = "okay"; - phy_id = <&davinci_mdio>, <5>; + phy-handle = <&ethphy1>; phy-mode = "rmii"; dual_emac_res_vlan = <2>; }; diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts @@ -380,16 +380,24 @@ &davinci_mdio { status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <&ethphy0>; phy-mode = "mii"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <&ethphy1>; phy-mode = "mii"; dual_emac_res_vlan = <2>; }; diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts @@ -161,7 +161,7 @@ invensense,key = [4e cc 7e eb f6 1e 35 22 00 34 0d 65 32 e9 94 89];*/ }; - bmp280: pressure@78 { + bmp280: pressure@76 { compatible = "bosch,bmp280"; reg = <0x76>; }; @@ -424,7 +424,7 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <4>; + phy-handle = <&ethphy0>; phy-mode = "rgmii-txid"; }; @@ -441,6 +441,10 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; + + ethphy0: ethernet-phy@4 { + reg = <4>; + }; }; &mmc1 { diff --git a/arch/arm/boot/dts/am335x-pdu001.dts b/arch/arm/boot/dts/am335x-pdu001.dts @@ -373,7 +373,7 @@ ti,pindir-d0-out-d1-in; status = "okay"; - cfaf240320a032t { + display-controller@0 { compatible = "orisetech,otm3225a"; reg = <0>; spi-max-frequency = <1000000>; @@ -533,16 +533,24 @@ pinctrl-names = "default"; pinctrl-0 = <&davinci_mdio_default>; status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <&ethphy0>; phy-mode = "mii"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <&ethphy1>; phy-mode = "mii"; dual_emac_res_vlan = <2>; }; diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts @@ -265,13 +265,13 @@ /* Ethernet */ &cpsw_emac0 { status = "okay"; - phy_id = <&davinci_mdio>, <0>; + phy-handle = <&ethphy0>; phy-mode = "rgmii"; }; &cpsw_emac1 { status = "okay"; - phy_id = <&davinci_mdio>, <1>; + phy-handle = <&ethphy1>; phy-mode = "rgmii"; }; @@ -279,6 +279,14 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mdio_pins>; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; }; &mac { diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe.dts b/arch/arm/boot/dts/am335x-sancloud-bbe.dts @@ -103,10 +103,14 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <&ethphy0>; phy-mode = "rgmii-txid"; }; diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts @@ -206,7 +206,6 @@ status = "okay"; slaves = <1>; cpsw_emac0: slave@4a100200 { - phy_id = <&davinci_mdio>, <0>; phy-mode = "mii"; phy-handle = <&ethernetphy0>; }; diff --git a/arch/arm/boot/dts/am3517-evm-ui.dtsi b/arch/arm/boot/dts/am3517-evm-ui.dtsi @@ -0,0 +1,220 @@ +/* + * Copyright (C) 2018 Logic PD, Inc - http://www.logicpd.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/input/input.h> + +/ { + codec1 { + compatible = "simple-audio-card"; + simple-audio-card,name = "tlv320aic23-hifi"; + + simple-audio-card,widgets = + "Microphone", "Mic In", + "Line", "Line In", + "Line", "Line Out"; + + simple-audio-card,routing = + "Line Out", "LOUT", + "Line Out", "ROUT", + "LLINEIN", "Line In", + "RLINEIN", "Line In", + "MICIN", "Mic In"; + + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + + simple-audio-card,cpu { + sound-dai = <&mcbsp1>; + }; + + sound_master: simple-audio-card,codec { + sound-dai = <&tlv320aic23_1>; + system-clock-frequency = <12000000>; + }; + }; + + codec2 { + compatible = "simple-audio-card"; + simple-audio-card,name = "tlv320aic23-hifi"; + + simple-audio-card,widgets = + "Microphone", "Mic In", + "Line", "Line In", + "Line", "Line Out"; + + simple-audio-card,routing = + "Line Out", "LOUT", + "Line Out", "ROUT", + "LLINEIN", "Line In", + "RLINEIN", "Line In", + "MICIN", "Mic In"; + + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_master2>; + simple-audio-card,frame-master = <&sound_master2>; + + simple-audio-card,cpu { + sound-dai = <&mcbsp2>; + }; + + sound_master2: simple-audio-card,codec { + sound-dai = <&tlv320aic23_2>; + system-clock-frequency = <12000000>; + }; + }; + + expander-keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + record { + label = "Record"; + /* linux,code = <BTN_0>; */ + gpios = <&tca6416_2 15 GPIO_ACTIVE_LOW>; + }; + + play { + label = "Play"; + linux,code = <KEY_PLAY>; + gpios = <&tca6416_2 14 GPIO_ACTIVE_LOW>; + }; + + Stop { + label = "Stop"; + linux,code = <KEY_STOP>; + gpios = <&tca6416_2 13 GPIO_ACTIVE_LOW>; + }; + + fwd { + label = "FWD"; + linux,code = <KEY_FASTFORWARD>; + gpios = <&tca6416_2 12 GPIO_ACTIVE_LOW>; + }; + + rwd { + label = "RWD"; + linux,code = <KEY_REWIND>; + gpios = <&tca6416_2 11 GPIO_ACTIVE_LOW>; + }; + + shift { + label = "Shift"; + linux,code = <KEY_LEFTSHIFT>; + gpios = <&tca6416_2 10 GPIO_ACTIVE_LOW>; + }; + + Mode { + label = "Mode"; + linux,code = <BTN_MODE>; + gpios = <&tca6416_2 9 GPIO_ACTIVE_LOW>; + }; + + Menu { + label = "Menu"; + linux,code = <KEY_MENU>; + gpios = <&tca6416_2 8 GPIO_ACTIVE_LOW>; + }; + + Up { + label = "Up"; + linux,code = <KEY_UP>; + gpios = <&tca6416_2 7 GPIO_ACTIVE_LOW>; + }; + + Down { + label = "Down"; + linux,code = <KEY_DOWN>; + gpios = <&tca6416_2 6 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&i2c2 { + /* Audio codecs */ + tlv320aic23_1: codec@1a { + compatible = "ti,tlv320aic23"; + reg = <0x1a>; + #sound-dai-cells= <0>; + status = "okay"; + }; + + tlv320aic23_2: codec@1b { + compatible = "ti,tlv320aic23"; + reg = <0x1b>; + #sound-dai-cells= <0>; + status = "okay"; + }; +}; + +&i2c3 { + /* Audio codecs */ + tlv320aic23_3: codec@1a { + compatible = "ti,tlv320aic23"; + reg = <0x1a>; + #sound-dai-cells= <0>; + status = "okay"; + }; + + /* GPIO Expanders */ + tca6416_2: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + vcc-supply = <&vdd_io_reg>; + }; + + tca6416_3: gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + vcc-supply = <&vdd_io_reg>; + }; + + /* TVP5146 Analog Video decoder input */ + tvp5146@5c { + compatible = "ti,tvp5146m2"; + reg = <0x5c>; + }; +}; + +&mcbsp1 { + status = "ok"; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp1_pins>; +}; + +&mcbsp2 { + status = "ok"; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp2_pins>; +}; + +&omap3_pmx_core { + mcbsp1_pins: pinmux_mcbsp1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dx */ + OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dr */ + OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0) /* mcbsp_clks.mcbsp1_fsx */ + OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0) /* mcbsp1_clkx.mcbsp1_clkx */ + >; + }; + + mcbsp2_pins: pinmux_mcbsp2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */ + OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx.mcbsp2_clkx */ + OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2.dr */ + OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx.mcbsp2_dx */ + >; + }; +}; diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts @@ -9,6 +9,7 @@ #include "am3517.dtsi" #include "am3517-som.dtsi" +#include "am3517-evm-ui.dtsi" #include <dt-bindings/input/input.h> / { diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi @@ -1101,7 +1101,7 @@ }; }; - qspi: qspi@47900000 { + qspi: spi@47900000 { compatible = "ti,am4372-qspi"; reg = <0x47900000 0x100>, <0x30000000 0x4000000>; diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts @@ -339,16 +339,24 @@ pinctrl-names = "default"; pinctrl-0 = <&davinci_mdio_default>; status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <&ethphy0>; phy-mode = "rgmii-txid"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <&ethphy1>; phy-mode = "rgmii-txid"; dual_emac_res_vlan = <2>; }; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -831,10 +831,14 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <&ethphy0>; phy-mode = "rgmii"; }; diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -499,10 +499,14 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <&ethphy0>; phy-mode = "rgmii"; }; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -799,16 +799,24 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; + + ethphy0: ethernet-phy@4 { + reg = <4>; + }; + + ethphy1: ethernet-phy@5 { + reg = <5>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <4>; + phy-handle = <&ethphy0>; phy-mode = "rgmii"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <5>; + phy-handle = <&ethphy1>; phy-mode = "rgmii"; dual_emac_res_vlan = <2>; }; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -575,10 +575,14 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; + + ethphy0: ethernet-phy@16 { + reg = <16>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <16>; + phy-handle = <&ethphy0>; phy-mode = "rmii"; }; diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts @@ -64,6 +64,82 @@ linux,default-trigger = "mmc0"; }; }; + + idk-leds { + status = "disabled"; + compatible = "gpio-leds"; + red0-led { + label = "idk:red0"; + gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + green0-led { + label = "idk:green0"; + gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + blue0-led { + label = "idk:blue0"; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + red1-led { + label = "idk:red1"; + gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + green1-led { + label = "idk:green1"; + gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + blue1-led { + label = "idk:blue1"; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + red2-led { + label = "idk:red2"; + gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + green2-led { + label = "idk:green2"; + gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + blue2-led { + label = "idk:blue2"; + gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + red3-led { + label = "idk:red3"; + gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + green3-led { + label = "idk:green3"; + gpios = <&gpio7 25 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + blue3-led { + label = "idk:blue3"; + gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; }; &extcon_usb2 { @@ -71,6 +147,10 @@ vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>; }; +&sn65hvs882 { + load-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; +}; + &mailbox5 { status = "okay"; mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { @@ -114,7 +194,3 @@ pinctrl-1 = <&mmc2_pins_hs>; pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>; }; - -&cpu0 { - vdd-supply = <&smps12_reg>; -}; diff --git a/arch/arm/boot/dts/am572x-idk-common.dtsi b/arch/arm/boot/dts/am572x-idk-common.dtsi @@ -55,6 +55,82 @@ linux,default-trigger = "mmc0"; }; }; + + idk-leds { + status = "disabled"; + compatible = "gpio-leds"; + red0-led { + label = "idk:red0"; + gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + green0-led { + label = "idk:green0"; + gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + blue0-led { + label = "idk:blue0"; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + red1-led { + label = "idk:red1"; + gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + green1-led { + label = "idk:green1"; + gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + blue1-led { + label = "idk:blue1"; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + red2-led { + label = "idk:red2"; + gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + green2-led { + label = "idk:green2"; + gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + blue2-led { + label = "idk:blue2"; + gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + red3-led { + label = "idk:red3"; + gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + green3-led { + label = "idk:green3"; + gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + blue3-led { + label = "idk:blue3"; + gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; }; &extcon_usb2 { diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts @@ -36,7 +36,3 @@ pinctrl-1 = <&mmc2_pins_hs>; pinctrl-2 = <&mmc2_pins_ddr_rev20>; }; - -&cpu0 { - vdd-supply = <&smps12_reg>; -}; diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts @@ -518,7 +518,7 @@ }; /* touch controller */ - ads7846@0 { + touchscreen@1 { pinctrl-names = "default"; pinctrl-0 = <&ads7846_pins>; @@ -558,13 +558,13 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <&ethphy0>; phy-mode = "rgmii-txid"; dual_emac_res_vlan = <0>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <&ethphy1>; phy-mode = "rgmii-txid"; dual_emac_res_vlan = <1>; }; @@ -573,6 +573,14 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_pins_default>; pinctrl-1 = <&davinci_mdio_pins_sleep>; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; }; &usb2_phy1 { diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -372,17 +372,27 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <&ethphy0>; phy-mode = "rgmii"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <&ethphy1>; phy-mode = "rgmii"; dual_emac_res_vlan = <2>; }; +&davinci_mdio { + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &usb2_phy1 { phy-supply = <&ldousb_reg>; }; @@ -478,3 +488,7 @@ }; }; }; + +&cpu0 { + vdd-supply = <&smps12_reg>; +}; diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi @@ -371,7 +371,7 @@ clock-names = "uartclk", "apb_pclk"; }; - ssp: ssp@1000d000 { + ssp: spi@1000d000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x1000d000 0x1000>; clocks = <&sspclk>, <&pclk>; diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -380,7 +380,7 @@ clock-names = "apb_pclk"; }; - pb1176_ssp: ssp@1010b000 { + pb1176_ssp: spi@1010b000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x1010b000 0x1000>; interrupt-parent = <&intc_dc1176>; diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts @@ -523,7 +523,7 @@ clock-names = "uartclk", "apb_pclk"; }; - ssp@1000d000 { + spi@1000d000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x1000d000 0x1000>; interrupt-parent = <&intc_pb11mp>; diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi @@ -362,7 +362,7 @@ clock-names = "uartclk", "apb_pclk"; }; - ssp: ssp@1000d000 { + ssp: spi@1000d000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x1000d000 0x1000>; clocks = <&sspclk>, <&pclk>; diff --git a/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts b/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts @@ -0,0 +1,155 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Device Tree file for Marvell Armada 385 AMC board + * (DB-88F6820-AMC) + * + * Copyright (C) 2017 Allied Telesis Labs + */ + +/dts-v1/; +#include "armada-385.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Marvell Armada 385 AMC"; + compatible = "marvell,a385-db-amc", "marvell,armada385", "marvell,armada380"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + ethernet0 = &eth0; + ethernet1 = &eth1; + spi1 = &spi1; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x80000000>; /* 2GB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; +}; + +&uart0 { + /* + * Exported on the micro USB connector CON3 + * through an FTDI + */ + + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + + +&eth0 { + pinctrl-names = "default"; + /* + * The Reference Clock 0 is used to provide a + * clock to the PHY + */ + pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>; + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; +}; + +&eth2 { + status = "okay"; + phy = <&phy1>; + phy-mode = "sgmii"; +}; + +&usb0 { + status = "okay"; +}; + + + +&mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + + phy0: ethernet-phy@1 { + reg = <1>; + }; + + phy1: ethernet-phy@0 { + reg = <0>; + }; +}; + +&nand_controller { + status = "okay"; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + nand-on-flash-bbt; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + reg = <0x00000000 0x40000000>; + label = "user"; + }; + }; + }; +}; + +&pciec { + status = "okay"; +}; + +&pcie1 { + /* Port 0, Lane 0 */ + status = "okay"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + reg = <0x00000000 0x00100000>; + label = "u-boot"; + }; + partition@100000 { + reg = <0x00100000 0x00040000>; + label = "u-boot-env"; + }; + }; + }; +}; + +&refclk { + clock-frequency = <20000000>; +}; diff --git a/arch/arm/boot/dts/armada-388-clearfog.dtsi b/arch/arm/boot/dts/armada-388-clearfog.dtsi @@ -48,7 +48,7 @@ &clearfog_sdhci_cd_pins>; pinctrl-names = "default"; status = "okay"; - vmmc = <&reg_3p3v>; + vmmc-supply = <&reg_3p3v>; wp-inverted; }; diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi @@ -189,7 +189,7 @@ }; }; - nand: nand@d0000 { + nand_controller: nand-controller@d0000 { clocks = <&dfx_coredivclk 0>; }; @@ -243,7 +243,7 @@ ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>; pp0: packet-processor@0 { - compatible = "marvell,prestera-98dx3236"; + compatible = "marvell,prestera-98dx3236", "marvell,prestera"; reg = <0 0x4000000>; interrupts = <33>, <34>, <35>; dfx = <&dfx>; diff --git a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi @@ -35,5 +35,5 @@ }; &pp0 { - compatible = "marvell,prestera-98dx3336"; + compatible = "marvell,prestera-98dx3336", "marvell,prestera"; }; diff --git a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi @@ -49,6 +49,6 @@ }; &pp0 { - compatible = "marvell,prestera-98dx4251"; + compatible = "marvell,prestera-98dx4251", "marvell,prestera"; interrupts = <33>, <34>, <35>, <36>; }; diff --git a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts @@ -68,14 +68,18 @@ status = "okay"; }; -&nand { +&nand_controller { status = "okay"; - label = "pxa3xx_nand-0"; - num-cs = <1>; - marvell,nand-keep-config; - nand-on-flash-bbt; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + marvell,nand-keep-config; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + }; }; &sdio { diff --git a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts @@ -67,14 +67,18 @@ status = "okay"; }; -&nand { +&nand_controller { status = "okay"; - label = "pxa3xx_nand-0"; - num-cs = <1>; - marvell,nand-keep-config; - nand-on-flash-bbt; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + marvell,nand-keep-config; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + }; }; &spi0 { diff --git a/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts b/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts @@ -0,0 +1,207 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "HXT StarDragon 4800 REP2 AST2520"; + compatible = "hxt,stardragon4800-rep2-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x40000000>; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 8>; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 7>; + }; + + leds { + compatible = "gpio-leds"; + + system_fault1 { + label = "System_fault1"; + gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_LOW>; + }; + + system_fault2 { + label = "System_fault2"; + gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_LOW>; + }; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + flash@0 { + status = "okay"; + }; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2ck_default + &pinctrl_spi2miso_default + &pinctrl_spi2mosi_default + &pinctrl_spi2cs0_default>; +}; + +&uart3 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>; + current-speed = <115200>; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>; +}; + +&mac1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii2_default>; + use-ncsi; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + tmp421@1e { + compatible = "ti,tmp421"; + reg = <0x1e>; + }; + tmp421@2a { + compatible = "ti,tmp421"; + reg = <0x2a>; + }; + tmp421@1c { + compatible = "ti,tmp421"; + reg = <0x1c>; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; + + tmp421@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + nvt210@4c { + compatible = "nvt210"; + reg = <0x4c>; + }; + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + pagesize = <128>; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; + + pca9641@70 { + compatible = "nxp,pca9641"; + reg = <0x70>; + i2c-arb { + #address-cells = <1>; + #size-cells = <0>; + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + dps650ab@58 { + compatible = "dps650ab"; + reg = <0x58>; + }; + }; + }; +}; + +&i2c9 { + status = "okay"; +}; + +&vuart { + status = "okay"; +}; + +&gfx { + status = "okay"; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&gpio { + pin_gpio_c7 { + gpio-hog; + gpios = <ASPEED_GPIO(C, 7) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "BIOS_SPI_MUX_S"; + }; + pin_gpio_d1 { + gpio-hog; + gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "PHY2_RESET_N"; + }; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2018 Facebook Inc. +// Author: Vijay Khemka <vijaykhemka@fb.com> +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Facebook TiogaPass BMC"; + compatible = "facebook,tiogapass-bmc", "aspeed,ast2500"; + aliases { + serial0 = &uart1; + serial4 = &uart5; + }; + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + }; +}; + +&uart1 { + // Host Console + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default>; +}; + +&uart5 { + // BMC Console + status = "okay"; +}; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; +}; + +&i2c0 { + status = "okay"; + //Airmax Conn B, CPU0 PIROM, CPU1 PIROM +}; + +&i2c1 { + status = "okay"; + //X24 Riser +}; + +&i2c2 { + status = "okay"; + // Mezz Management SMBus +}; + +&i2c3 { + status = "okay"; + // SMBus to Board ID EEPROM +}; + +&i2c4 { + status = "okay"; + // BMC Debug Header +}; + +&i2c5 { + status = "okay"; + // CPU Voltage regulators +}; + +&i2c6 { + status = "okay"; + tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + }; + tmp421@4e { + compatible = "ti,tmp421"; + reg = <0x4e>; + }; + tmp421@4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + pagesize = <32>; + }; +}; + +&i2c7 { + status = "okay"; + //HSC, AirMax Conn A +}; + +&i2c8 { + status = "okay"; + //Mezz Sensor SMBus +}; + +&i2c9 { + status = "okay"; + //USB Debug Connector +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>; + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + fan@1 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x01>; + }; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts @@ -7,6 +7,25 @@ model = "Quanta Q71L BMC"; compatible = "quanta,q71l-bmc", "aspeed,ast2400"; + aliases { + i2c14 = &i2c_pcie2; + i2c15 = &i2c_pcie3; + i2c16 = &i2c_pcie6; + i2c17 = &i2c_pcie7; + i2c18 = &i2c_pcie1; + i2c19 = &i2c_pcie4; + i2c20 = &i2c_pcie5; + i2c21 = &i2c_pcie8; + i2c22 = &i2c_pcie9; + i2c23 = &i2c_pcie10; + i2c24 = &i2c_ssd1; + i2c25 = &i2c_ssd2; + i2c26 = &i2c_psu4; + i2c27 = &i2c_psu1; + i2c28 = &i2c_psu3; + i2c29 = &i2c_psu2; + }; + chosen { stdout-path = &uart5; bootargs = "console=ttyS4,115200 earlyprintk"; @@ -93,6 +112,10 @@ &pinctrl_ddcclk_default &pinctrl_ddcdat_default>; }; +&ibt { + status = "okay"; +}; + &lpc_snoop { status = "okay"; snoop-ports = <0x80>; @@ -299,24 +322,44 @@ #address-cells = <1>; #size-cells = <0>; reg = <0>; + + psu@59 { + compatible = "pmbus"; + reg = <0x59>; + }; }; i2c_psu1: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; + + psu@58 { + compatible = "pmbus"; + reg = <0x58>; + }; }; i2c_psu3: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; + + psu@58 { + compatible = "pmbus"; + reg = <0x58>; + }; }; i2c_psu2: i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; + + psu@59 { + compatible = "pmbus"; + reg = <0x59>; + }; }; }; @@ -345,6 +388,10 @@ status = "okay"; }; +&adc { + status = "okay"; +}; + &pwm_tacho { status = "okay"; diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -350,7 +350,7 @@ status = "disabled"; }; - i2c: i2c@1e78a000 { + i2c: bus@1e78a000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -410,7 +410,7 @@ status = "disabled"; }; - i2c: i2c@1e78a000 { + i2c: bus@1e78a000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi @@ -70,9 +70,9 @@ &i2c1 { status = "okay"; - eeprom@87 { + eeprom@57 { compatible = "giantec,gt24c32a", "atmel,24c32"; - reg = <87>; + reg = <0x57>; pagesize = <32>; }; }; diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi @@ -59,9 +59,9 @@ &i2c1 { status = "okay"; - ft5426@56 { + ft5426@38 { compatible = "focaltech,ft5426", "edt,edt-ft5406"; - reg = <56>; + reg = <0x38>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcd_ctp_int>; diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts @@ -16,46 +16,6 @@ compatible = "axentia,nattis-2", "axentia,natte-2", "axentia,linea", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; - ahb { - apb { - pinctrl@fffff200 { - nattis { - pinctrl_usba_vbus: usba_vbus { - atmel,pins = - <AT91_PIOD 28 - AT91_PERIPH_GPIO - AT91_PINCTRL_DEGLITCH>; - }; - - pinctrl_mmc0_cd: mmc0_cd { - atmel,pins = - <AT91_PIOD 5 - AT91_PERIPH_GPIO - AT91_PINCTRL_PULL_UP_DEGLITCH>; - }; - - pinctrl_lcd_prlud0: lcd_prlud0 { - atmel,pins = - <AT91_PIOA 21 - AT91_PERIPH_GPIO - AT91_PINCTRL_OUTPUT_VAL(0)>; - }; - - pinctrl_lcd_hipow0: lcd_hipow0 { - atmel,pins = - <AT91_PIOA 23 - AT91_PERIPH_GPIO - AT91_PINCTRL_OUTPUT_VAL(0)>; - }; - }; - }; - - watchdog@fffffe40 { - status = "okay"; - }; - }; - }; - gpio-keys { compatible = "gpio-keys"; @@ -103,10 +63,29 @@ }; panel: panel { - compatible = "sharp,lq150x1lg11"; + compatible = "sharp,lq150x1lg11", "panel-lvds"; + backlight = <&panel_bl>; power-supply = <&panel_reg>; + width-mm = <304>; + height-mm = <228>; + + data-mapping = "jeida-18"; + + panel-timing { + // 1024x768 @ 60Hz (typical) + clock-frequency = <50000000 65000000 80000000>; + hactive = <1024>; + vactive = <768>; + hfront-porch = <48 88 88>; + hback-porch = <96 168 168>; + hsync-len = <32 64 64>; + vsync-len = <3 13 74>; + vfront-porch = <3 13 74>; + vback-porch = <3 12 74>; + }; + port { panel_input: endpoint { remote-endpoint = <&lvds_encoder_output>; @@ -115,7 +94,10 @@ }; lvds-encoder { - compatible = "lvds-encoder"; + compatible = "ti,ds90c185", "lvds-encoder"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lvds_prlud0 &pinctrl_lvds_hipow0>; ports { #address-cells = <1>; @@ -159,6 +141,36 @@ }; }; +&pinctrl { + nattis { + pinctrl_usba_vbus: usba_vbus { + atmel,pins = <AT91_PIOD 28 AT91_PERIPH_GPIO + AT91_PINCTRL_DEGLITCH>; + }; + + pinctrl_mmc0_cd: mmc0_cd { + atmel,pins = <AT91_PIOD 5 AT91_PERIPH_GPIO + AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + + pinctrl_lvds_prlud0: lvds_prlud0 { + atmel,pins = <AT91_PIOA 21 AT91_PERIPH_GPIO + (AT91_PINCTRL_OUTPUT | + AT91_PINCTRL_OUTPUT_VAL(0))>; + }; + + pinctrl_lvds_hipow0: lvds_hipow0 { + atmel,pins = <AT91_PIOA 23 AT91_PERIPH_GPIO + (AT91_PINCTRL_OUTPUT | + AT91_PINCTRL_OUTPUT_VAL(0))>; + }; + }; +}; + +&watchdog { + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -195,14 +207,12 @@ hlcdc-display-controller { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd_base - &pinctrl_lcd_rgb565 - &pinctrl_lcd_prlud0 - &pinctrl_lcd_hipow0>; + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>; port@0 { hlcdc_output: endpoint { remote-endpoint = <&lvds_encoder_input>; + bus-width = <16>; }; }; }; @@ -219,6 +229,7 @@ reg = <0>; bus-width = <4>; cd-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>; + cd-inverted; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts @@ -283,6 +283,13 @@ status = "okay"; }; + adc: adc@fc030000 { + vddana-supply = <&vddana>; + vref-supply = <&advref>; + + status = "disabled"; + }; + pinctrl@fc038000 { pinctrl_can1_default: can1_default { @@ -549,4 +556,39 @@ linux,default-trigger = "heartbeat"; }; }; + + vddin_3v3: fixed-regulator-vddin_3v3 { + compatible = "regulator-fixed"; + + regulator-name = "VDDIN_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + status = "okay"; + }; + + vddana: fixed-regulator-vddana { + compatible = "regulator-fixed"; + + regulator-name = "VDDANA"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vddin_3v3>; + status = "okay"; + }; + + advref: fixed-regulator-advref { + compatible = "regulator-fixed"; + + regulator-name = "advref"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vddana>; + status = "okay"; + }; }; diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts @@ -92,13 +92,13 @@ reg = <0x40000 0xc0000>; }; - bootloaderenv@0x100000 { - label = "bootloader env"; + bootloaderenvred@0x100000 { + label = "bootloader env redundant"; reg = <0x100000 0x40000>; }; - bootloaderenvred@0x140000 { - label = "bootloader env redundant"; + bootloaderenv@0x140000 { + label = "bootloader env"; reg = <0x140000 0x40000>; }; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -281,6 +281,12 @@ status = "okay"; }; + i2s0: i2s@f8050000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2s0_default>; + status = "disabled"; /* conflict with can0 */ + }; + can0: can@f8054000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can0_default>; @@ -424,6 +430,24 @@ bias-disable; }; + pinctrl_i2s0_default: i2s0_default { + pinmux = <PIN_PC1__I2SC0_CK>, + <PIN_PC2__I2SC0_MCK>, + <PIN_PC3__I2SC0_WS>, + <PIN_PC4__I2SC0_DI0>, + <PIN_PC5__I2SC0_DO0>; + bias-disable; + }; + + pinctrl_i2s1_default: i2s1_default { + pinmux = <PIN_PA15__I2SC1_CK>, + <PIN_PA14__I2SC1_MCK>, + <PIN_PA16__I2SC1_WS>, + <PIN_PA17__I2SC1_DI0>, + <PIN_PA18__I2SC1_DO0>; + bias-disable; + }; + pinctrl_key_gpio_default: key_gpio_default { pinmux = <PIN_PB9__GPIO>; bias-pull-up; @@ -546,6 +570,12 @@ status = "okay"; }; + i2s1: i2s@fc04c000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2s1_default>; + status = "disabled"; /* conflict with spi0, sdmmc1 */ + }; + can1: can@fc050000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can1_default>; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -297,12 +297,17 @@ bootloader@40000 { label = "bootloader"; - reg = <0x40000 0x80000>; + reg = <0x40000 0xc0000>; }; - bootloaderenv@c0000 { + bootloaderenvred@100000 { + label = "bootloader env redundant"; + reg = <0x100000 0x40000>; + }; + + bootloaderenv@140000 { label = "bootloader env"; - reg = <0xc0000 0xc0000>; + reg = <0x140000 0x40000>; }; dtb@180000 { diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -232,12 +232,17 @@ bootloader@40000 { label = "bootloader"; - reg = <0x40000 0x80000>; + reg = <0x40000 0xc0000>; }; - bootloaderenv@c0000 { + bootloaderenvred@100000 { + label = "bootloader env redundant"; + reg = <0x100000 0x40000>; + }; + + bootloaderenv@140000 { label = "bootloader env"; - reg = <0xc0000 0xc0000>; + reg = <0x140000 0x40000>; }; dtb@180000 { @@ -252,7 +257,7 @@ rootfs@800000 { label = "rootfs"; - reg = <0x800000 0x0f800000>; + reg = <0x800000 0x1f800000>; }; }; }; diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/at91-tse850-3.dts @@ -16,25 +16,6 @@ compatible = "axentia,tse850v3", "axentia,linea", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; - ahb { - apb { - pinctrl@fffff200 { - tse850 { - pinctrl_usba_vbus: usba-vbus { - atmel,pins = - <AT91_PIOC 31 - AT91_PERIPH_GPIO - AT91_PINCTRL_DEGLITCH>; - }; - }; - }; - - watchdog@fffffe40 { - status = "okay"; - }; - }; - }; - sck: oscillator { compatible = "fixed-clock"; @@ -253,6 +234,19 @@ }; }; +&pinctrl { + tse850 { + pinctrl_usba_vbus: usba-vbus { + atmel,pins = <AT91_PIOC 31 AT91_PERIPH_GPIO + AT91_PINCTRL_DEGLITCH>; + }; + }; +}; + +&watchdog { + status = "okay"; +}; + &usart0 { status = "okay"; diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts @@ -128,7 +128,7 @@ i2c2: i2c@f8024000 { status = "okay"; - rtc1: rtc@64 { + rtc1: rtc@32 { compatible = "epson,rx8900"; reg = <0x32>; }; diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts @@ -127,7 +127,7 @@ spi0: spi@fffc8000 { cs-gpios = <0>, <&pioC 11 0>, <0>, <0>; - mtd_dataflash@0 { + mtd_dataflash@1 { compatible = "atmel,at45", "atmel,dataflash"; spi-max-frequency = <50000000>; reg = <1>; diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts @@ -160,7 +160,7 @@ spi-max-frequency = <15000000>; }; - tsc2046@0 { + tsc2046@2 { reg = <2>; compatible = "ti,ads7843"; interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -109,7 +109,7 @@ spi0: spi@fffc8000 { cs-gpios = <0>, <&pioC 11 0>, <0>, <0>; - mtd_dataflash@0 { + mtd_dataflash@1 { compatible = "atmel,at45", "atmel,dataflash"; spi-max-frequency = <50000000>; reg = <1>; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -570,7 +570,7 @@ }; }; - uart1 { + usart1 { pinctrl_usart1: usart1-0 { atmel,pins = <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi @@ -85,12 +85,22 @@ uboot@40000 { label = "u-boot"; - reg = <0x40000 0x80000>; + reg = <0x40000 0xc0000>; }; - ubootenv@c0000 { + ubootenvred@100000 { + label = "U-Boot Env Redundant"; + reg = <0x100000 0x40000>; + }; + + ubootenv@140000 { label = "U-Boot Env"; - reg = <0xc0000 0x140000>; + reg = <0x140000 0x40000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; }; kernel@200000 { @@ -100,7 +110,7 @@ rootfs@800000 { label = "rootfs"; - reg = <0x800000 0x1f800000>; + reg = <0x800000 0x0f800000>; }; }; }; diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi @@ -216,7 +216,7 @@ reg = <0x33000 0x14>; }; - qspi: qspi@27200 { + qspi: spi@27200 { compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi"; reg = <0x027200 0x184>, <0x027000 0x124>, diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -273,7 +273,7 @@ brcm,nand-has-wp; }; - qspi: qspi@27200 { + qspi: spi@27200 { compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi"; reg = <0x027200 0x184>, <0x027000 0x124>, @@ -377,7 +377,36 @@ srab: srab@36000 { compatible = "brcm,nsp-srab"; - reg = <0x36000 0x1000>; + reg = <0x36000 0x1000>, + <0x3f308 0x8>, + <0x3f410 0xc>; + reg-names = "srab", "mux_config", "sgmii"; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "link_state_p0", + "link_state_p1", + "link_state_p2", + "link_state_p3", + "link_state_p4", + "link_state_p5", + "link_state_p7", + "link_state_p8", + "phy", + "ts", + "imp_sleep_timer_p5", + "imp_sleep_timer_p7", + "imp_sleep_timer_p8"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts b/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2837-rpi-cm3.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" + +/ { + compatible = "raspberrypi,3-compute-module", "brcm,bcm2837"; + model = "Raspberry Pi Compute Module 3 IO board V3.0"; +}; + +&gpio { + /* + * This is based on the official GPU firmware DT blob. + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "GPIO0", + "GPIO1", + "GPIO2", + "GPIO3", + "GPIO4", + "GPIO5", + "GPIO6", + "GPIO7", + "GPIO8", + "GPIO9", + "GPIO10", + "GPIO11", + "GPIO12", + "GPIO13", + "GPIO14", + "GPIO15", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "GPIO28", + "GPIO29", + "GPIO30", + "GPIO31", + "GPIO32", + "GPIO33", + "GPIO34", + "GPIO35", + "GPIO36", + "GPIO37", + "GPIO38", + "GPIO39", + "GPIO40", + "GPIO41", + "GPIO42", + "GPIO43", + "GPIO44", + "GPIO45", + "GPIO46", + "GPIO47", + /* Used by eMMC */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + + pinctrl-0 = <&gpioout &alt0>; +}; + +&hdmi { + hpd-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio14>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2837.dtsi" +#include "bcm2835-rpi.dtsi" + +/ { + memory { + reg = <0 0x40000000>; + }; + + reg_3v3: fixed-regulator { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_1v8: fixed-regulator { + compatible = "regulator-fixed"; + regulator-name = "1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; +}; + +&firmware { + expgpio: gpio { + compatible = "raspberrypi,firmware-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "HDMI_HPD_N", + "EMMC_EN_N", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC"; + status = "okay"; + }; +}; + +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + vmmc-supply = <&reg_3v3>; + vqmmc-supply = <&reg_1v8>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi @@ -1,4 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/net/microchip-lan78xx.h> + / { aliases { ethernet0 = &ethernet; @@ -21,6 +23,18 @@ ethernet: ethernet@1 { compatible = "usb424,7800"; reg = <1>; + + mdio { + #address-cells = <0x1>; + #size-cells = <0x0>; + eth_phy: ethernet-phy@1 { + reg = <1>; + microchip,led-modes = < + LAN78XX_LINK_1000_ACTIVITY + LAN78XX_LINK_10_100_ACTIVITY + >; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts @@ -94,6 +94,34 @@ &spi_nor { status = "okay"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boot@0 { + label = "boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + os-image@100000 { + label = "os-image"; + reg = <0x040000 0x200000>; + compatible = "brcm,trx"; + }; + + rootfs@240000 { + label = "rootfs"; + reg = <0x240000 0xc00000>; + }; + + nvram@ff0000 { + label = "nvram"; + reg = <0xff0000 0x010000>; + }; + }; }; &usb2 { diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts @@ -66,3 +66,34 @@ &usb3_phy { status = "okay"; }; + +&nandcs { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boot@0 { + label = "boot"; + reg = <0x00000000 0x00080000>; + read-only; + }; + + nvram@80000 { + label = "nvram"; + reg = <0x00080000 0x00180000>; + }; + + firmware@200000 { + label = "firmware"; + reg = <0x00200000 0x07cc0000>; + compatible = "brcm,trx"; + }; + + asus@7ec0000 { + label = "asus"; + reg = <0x07ec0000 0x00140000>; + read-only; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts @@ -103,6 +103,34 @@ &spi_nor { status = "okay"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boot@0 { + label = "boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + os-image@100000 { + label = "os-image"; + reg = <0x040000 0x200000>; + compatible = "brcm,trx"; + }; + + rootfs@240000 { + label = "rootfs"; + reg = <0x240000 0xc00000>; + }; + + nvram@ff0000 { + label = "nvram"; + reg = <0xff0000 0x010000>; + }; + }; }; &usb3_phy { diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi @@ -12,6 +12,10 @@ reg = <0>; #address-cells = <1>; #size-cells = <1>; + + partitions { + compatible = "brcm,bcm947xx-cfe-partitions"; + }; }; }; }; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi @@ -475,8 +475,11 @@ compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; - linux,part-probe = "ofpart", "bcm47xxpart"; status = "disabled"; + + partitions { + compatible = "brcm,bcm947xx-cfe-partitions"; + }; }; }; diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts @@ -58,6 +58,24 @@ open-source; priority = <200>; }; + + /* Hardware I2C block cannot do more than 63 bytes per transfer, + * which would prevent reading from a SFP's EEPROM (256 byte). + */ + i2c1: i2c { + compatible = "i2c-gpio"; + sda-gpios = <&gpioa 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpioa 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + }; + + sfp: sfp { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + mod-def0-gpios = <&gpioa 28 GPIO_ACTIVE_LOW>; + los-gpios = <&gpioa 24 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&gpioa 30 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpioa 26 GPIO_ACTIVE_HIGH>; + }; }; &amac0 { @@ -210,6 +228,14 @@ reg = <4>; }; + port@5 { + label = "sfp"; + phy-mode = "sgmii"; + reg = <5>; + sfp = <&sfp>; + managed = "in-band-status"; + }; + port@8 { ethernet = <&amac2>; label = "cpu"; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts @@ -221,6 +221,12 @@ gpio-controller; #gpio-cells = <2>; }; + tca6416_bb: gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; }; &wdt { diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts @@ -352,7 +352,8 @@ compatible = "ti,ads7957"; reg = <3>; #io-channel-cells = <1>; - spi-max-frequency = <10000000>; + spi-max-frequency = <1000000>; + ti,spi-wdelay = <63>; vref-supply = <&adc_ref>; }; }; diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts @@ -27,15 +27,25 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <&ethphy0>; phy-mode = "rgmii"; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <&ethphy1>; phy-mode = "rgmii"; }; +&davinci_mdio { + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &gpmc { ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */ diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts @@ -36,15 +36,25 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <&ethphy0>; phy-mode = "rgmii"; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <&ethphy1>; phy-mode = "rgmii"; }; +&davinci_mdio { + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc1 { status = "disabled"; }; diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts @@ -87,7 +87,7 @@ status = "okay"; clock-frequency = <100000>; - si5351: clock-generator { + si5351: clock-generator@60 { compatible = "silabs,si5351a-msop"; reg = <0x60>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi @@ -155,7 +155,7 @@ 0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800 /* CESA SRAM 2k */ 0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU SRAM 2k */ - spi0: spi-ctrl@10600 { + spi0: spi@10600 { compatible = "marvell,orion-spi"; #address-cells = <1>; #size-cells = <0>; @@ -168,7 +168,7 @@ status = "disabled"; }; - i2c: i2c-ctrl@11000 { + i2c: i2c@11000 { compatible = "marvell,mv64xxx-i2c"; reg = <0x11000 0x20>; #address-cells = <1>; @@ -218,7 +218,7 @@ status = "disabled"; }; - spi1: spi-ctrl@14600 { + spi1: spi@14600 { compatible = "marvell,orion-spi"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts @@ -27,15 +27,25 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <&ethphy0>; phy-mode = "rgmii"; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <&ethphy1>; phy-mode = "rgmii"; }; +&davinci_mdio { + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &gpmc { ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */ diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts @@ -512,17 +512,27 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <2>; + phy-handle = <&ethphy0>; phy-mode = "rgmii"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <3>; + phy-handle = <&ethphy1>; phy-mode = "rgmii"; dual_emac_res_vlan = <2>; }; +&davinci_mdio { + ethphy0: ethernet-phy@2 { + reg = <2>; + }; + + ethphy1: ethernet-phy@3 { + reg = <3>; + }; +}; + &dcan1 { status = "ok"; pinctrl-names = "default", "sleep", "active"; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi @@ -336,6 +336,7 @@ <0 0 0 2 &pcie1_intc 2>, <0 0 0 3 &pcie1_intc 3>, <0 0 0 4 &pcie1_intc 4>; + ti,syscon-unaligned-access = <&scm_conf1 0x14 1>; status = "disabled"; pcie1_intc: interrupt-controller { interrupt-controller; @@ -354,7 +355,7 @@ ti,hwmods = "pcie1"; phys = <&pcie1_phy>; phy-names = "pcie-phy0"; - ti,syscon-unaligned-access = <&scm_conf1 0x14 2>; + ti,syscon-unaligned-access = <&scm_conf1 0x14 1>; status = "disabled"; }; }; @@ -387,6 +388,7 @@ <0 0 0 2 &pcie2_intc 2>, <0 0 0 3 &pcie2_intc 3>, <0 0 0 4 &pcie2_intc 4>; + ti,syscon-unaligned-access = <&scm_conf1 0x14 2>; pcie2_intc: interrupt-controller { interrupt-controller; #address-cells = <0>; @@ -1369,7 +1371,7 @@ status = "disabled"; }; - qspi: qspi@4b300000 { + qspi: spi@4b300000 { compatible = "ti,dra7xxx-qspi"; reg = <0x4b300000 0x100>, <0x5c000000 0x4000000>; diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts @@ -203,13 +203,13 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <2>; + phy-handle = <&dp83867_0>; phy-mode = "rgmii-id"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <3>; + phy-handle = <&dp83867_1>; phy-mode = "rgmii-id"; dual_emac_res_vlan = <2>; }; diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts @@ -61,13 +61,13 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <2>; + phy-handle = <&dp83867_0>; phy-mode = "rgmii-id"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <3>; + phy-handle = <&dp83867_1>; phy-mode = "rgmii-id"; dual_emac_res_vlan = <2>; }; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts @@ -51,10 +51,16 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <3>; + phy-handle = <&ethphy0>; phy-mode = "rgmii"; }; +&davinci_mdio { + ethphy0: ethernet-phy@3 { + reg = <3>; + }; +}; + &mmc1 { pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; pinctrl-0 = <&mmc1_pins_default>; diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts @@ -375,13 +375,13 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <2>; + phy-handle = <&dp83867_0>; phy-mode = "rgmii-id"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <3>; + phy-handle = <&dp83867_1>; phy-mode = "rgmii-id"; dual_emac_res_vlan = <2>; }; diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi @@ -69,6 +69,8 @@ compatible = "samsung,s2mps14-pmic"; interrupt-parent = <&gpx3>; interrupts = <5 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&s2mps14_irq>; reg = <0x66>; s2mps14_osc: clocks { @@ -350,6 +352,11 @@ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV3>; samsung,pin-val = <1>; }; + + s2mps14_irq: s2mps14-irq { + samsung,pins = "gpx3-5"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; }; &rtc { diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts @@ -151,6 +151,8 @@ reg = <0x66>; interrupt-parent = <&gpx0>; interrupts = <4 IRQ_TYPE_NONE>, <3 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&max8997_irq>; max8997,pmic-buck1-dvs-voltage = <1350000>; max8997,pmic-buck2-dvs-voltage = <1100000>; @@ -288,6 +290,13 @@ }; }; +&pinctrl_1 { + max8997_irq: max8997-irq { + samsung,pins = "gpx0-3", "gpx0-4"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; +}; + &sdhci_0 { bus-width = <4>; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts @@ -385,6 +385,12 @@ regulator-max-microvolt = <1800000>; }; + tflash_reg: LDO17 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vddq_reg: LDO21 { regulator-name = "VDDQ_M1M2_1.2V"; regulator-min-microvolt = <1200000>; @@ -452,6 +458,15 @@ status = "okay"; }; +&sdhci_2 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; + pinctrl-names = "default"; + vmmc-supply = <&tflash_reg>; + cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + &serial_0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -310,6 +310,9 @@ pmic@66 { compatible = "national,lp3974"; + interrupts-extended = <&gpx0 7 0>, <&gpx2 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&lp3974_irq>; reg = <0x66>; max8998,pmic-buck1-default-dvs-idx = <0>; @@ -503,6 +506,11 @@ }; &pinctrl_1 { + lp3974_irq: lp3974-irq { + samsung,pins = "gpx0-7", "gpx2-7"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + hdmi_hpd: hdmi-hpd { samsung,pins = "gpx3-7"; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; @@ -537,8 +545,7 @@ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; pinctrl-names = "default"; vmmc-supply = <&ldo5_reg>; - cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -1269,8 +1269,7 @@ &sdhci_2 { bus-width = <4>; - cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>; pinctrl-names = "default"; vmmc-supply = <&ldo21_reg>; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -539,8 +539,7 @@ pinctrl-names = "default"; vmmc-supply = <&ldo21_reg>; vqmmc-supply = <&ldo4_reg>; - cd-gpios = <&gpk2 2 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpk2 2 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -71,6 +71,17 @@ }; }; + panel: panel { + compatible = "boe,hv070wsa-100"; + power-supply = <&vcc_3v3_reg>; + enable-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>; + port { + panel_ep: endpoint { + remote-endpoint = <&bridge_out_ep>; + }; + }; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -97,6 +108,30 @@ reg = <2>; regulator-name = "hdmi-en"; }; + + vcc_1v2_reg: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "VCC_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vcc_1v8_reg: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcc_3v3_reg: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; fixed-rate-clocks { @@ -119,6 +154,32 @@ cpu0-supply = <&buck2_reg>; }; +&dsi_0 { + vddcore-supply = <&ldo8_reg>; + vddio-supply = <&ldo10_reg>; + samsung,pll-clock-frequency = <24000000>; + samsung,burst-clock-frequency = <320000000>; + samsung,esc-clock-frequency = <10000000>; + status = "okay"; + + bridge@0 { + reg = <0>; + compatible = "toshiba,tc358764"; + vddc-supply = <&vcc_1v2_reg>; + vddio-supply = <&vcc_1v8_reg>; + vddlvds-supply = <&vcc_3v3_reg>; + reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>; + #address-cells = <1>; + #size-cells = <0>; + port@1 { + reg = <1>; + bridge_out_ep: endpoint { + remote-endpoint = <&panel_ep>; + }; + }; + }; +}; + &dp { status = "okay"; samsung,color-space = <0>; @@ -149,9 +210,11 @@ }; &hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd>; status = "okay"; - ddc = <&i2c_2>; - hpd-gpios = <&gpx3 7 GPIO_ACTIVE_LOW>; + ddc = <&i2c_ddc>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; vdd_osc-supply = <&ldo10_reg>; vdd_pll-supply = <&ldo8_reg>; vdd-supply = <&ldo8_reg>; @@ -168,6 +231,8 @@ reg = <0x66>; interrupt-parent = <&gpx3>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&s5m8767_irq>; vinb1-supply = <&main_dc_reg>; vinb2-supply = <&main_dc_reg>; @@ -452,13 +517,6 @@ }; }; -&i2c_2 { - status = "okay"; - /* used by HDMI DDC */ - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; -}; - &i2c_3 { status = "okay"; @@ -535,6 +593,13 @@ cap-sd-highspeed; }; +&pinctrl_0 { + s5m8767_irq: s5m8767-irq { + samsung,pins = "gpx3-2"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; +}; + &rtc { status = "okay"; }; @@ -547,3 +612,22 @@ status = "okay"; samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>; }; + +&soc { + /* + * For unknown reasons HDMI-DDC does not work with Exynos I2C + * controllers. Lets use software I2C over GPIO pins as a workaround. + */ + i2c_ddc: i2c-gpio { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_gpio_bus>; + status = "okay"; + compatible = "i2c-gpio"; + gpios = <&gpa0 6 0 /* sda */ + &gpa0 7 0 /* scl */ + >; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi @@ -225,6 +225,12 @@ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; + i2c2_gpio_bus: i2c2-gpio-bus { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + uart2_data: uart2-data { samsung,pins = "gpa1-0", "gpa1-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; @@ -593,6 +599,11 @@ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; + + hdmi_hpd: hdmi-hpd { + samsung,pins = "gpx3-7"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; }; &pinctrl_1 { diff --git a/arch/arm/boot/dts/exynos5250-snow-rev5.dts b/arch/arm/boot/dts/exynos5250-snow-rev5.dts @@ -20,6 +20,14 @@ samsung,model = "Snow-I2S-MAX98090"; samsung,audio-codec = <&max98090>; + + cpu { + sound-dai = <&i2s0 0>; + }; + + codec { + sound-dai = <&max98090 0>, <&hdmi>; + }; }; }; @@ -31,6 +39,9 @@ interrupt-parent = <&gpx0>; pinctrl-names = "default"; pinctrl-0 = <&max98090_irq>; + clocks = <&pmu_system_controller 0>; + clock-names = "mclk"; + #sound-dai-cells = <1>; }; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi @@ -54,62 +54,109 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0>; - clock-frequency = <1700000000>; clocks = <&clock CLK_ARM_CLK>; clock-names = "cpu"; - clock-latency = <140000>; - - operating-points = < - 1700000 1300000 - 1600000 1250000 - 1500000 1225000 - 1400000 1200000 - 1300000 1150000 - 1200000 1125000 - 1100000 1100000 - 1000000 1075000 - 900000 1050000 - 800000 1025000 - 700000 1012500 - 600000 1000000 - 500000 975000 - 400000 950000 - 300000 937500 - 200000 925000 - >; + operating-points-v2 = <&cpu0_opp_table>; #cooling-cells = <2>; /* min followed by max */ }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <1>; - clock-frequency = <1700000000>; clocks = <&clock CLK_ARM_CLK>; clock-names = "cpu"; - clock-latency = <140000>; - - operating-points = < - 1700000 1300000 - 1600000 1250000 - 1500000 1225000 - 1400000 1200000 - 1300000 1150000 - 1200000 1125000 - 1100000 1100000 - 1000000 1075000 - 900000 1050000 - 800000 1025000 - 700000 1012500 - 600000 1000000 - 500000 975000 - 400000 950000 - 300000 937500 - 200000 925000 - >; + operating-points-v2 = <&cpu0_opp_table>; #cooling-cells = <2>; /* min followed by max */ }; }; + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <925000>; + clock-latency-ns = <140000>; + }; + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <937500>; + clock-latency-ns = <140000>; + }; + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <950000>; + clock-latency-ns = <140000>; + }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <975000>; + clock-latency-ns = <140000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <140000>; + }; + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <1012500>; + clock-latency-ns = <140000>; + }; + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1025000>; + clock-latency-ns = <140000>; + }; + opp-900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <1050000>; + clock-latency-ns = <140000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1075000>; + clock-latency-ns = <140000>; + opp-suspend; + }; + opp-1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <140000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1125000>; + clock-latency-ns = <140000>; + }; + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1150000>; + clock-latency-ns = <140000>; + }; + opp-1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-microvolt = <1200000>; + clock-latency-ns = <140000>; + }; + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1225000>; + clock-latency-ns = <140000>; + }; + opp-1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <1250000>; + clock-latency-ns = <140000>; + }; + opp-1700000000 { + opp-hz = /bits/ 64 <1700000000>; + opp-microvolt = <1300000>; + clock-latency-ns = <140000>; + }; + }; + soc: soc { sysram@2020000 { compatible = "mmio-sram"; @@ -756,6 +803,27 @@ #phy-cells = <0>; }; + mipi_phy: video-phy@10040710 { + compatible = "samsung,s5pv210-mipi-video-phy"; + reg = <0x10040710 0x100>; + #phy-cells = <1>; + syscon = <&pmu_system_controller>; + }; + + dsi_0: dsi@14500000 { + compatible = "samsung,exynos4210-mipi-dsi"; + reg = <0x14500000 0x10000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + samsung,power-domain = <&pd_disp1>; + phys = <&mipi_phy 3>; + phy-names = "dsim"; + clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI1>; + clock-names = "bus_clk", "sclk_mipi"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + adc: adc@12d10000 { compatible = "samsung,exynos-adc-v1"; reg = <0x12D10000 0x100>; diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts @@ -530,7 +530,7 @@ samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4 &sd2_wp>; bus-width = <4>; cap-sd-highspeed; vmmc-supply = <&ldo21_reg>; @@ -545,6 +545,14 @@ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; }; + sd2_wp: sd2-wp { + samsung,pins = "gpm5-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + /* Pin is floating so be sure to disable write-protect */ + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + }; + pmic_dvs_3: pmic-dvs-3 { samsung,pins = "gpx0-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -153,7 +153,7 @@ &clock_audss { assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>; - assigned-clock-parents = <&clock CLK_FOUT_EPLL>; + assigned-clock-parents = <&clock CLK_MAU_EPLL>; }; &cpu0 { @@ -312,6 +312,7 @@ regulator-name = "vdd_1v35"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; + regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; @@ -333,6 +334,7 @@ regulator-name = "vdd_2v"; regulator-min-microvolt = <2000000>; regulator-max-microvolt = <2000000>; + regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; @@ -343,6 +345,7 @@ regulator-name = "vdd_1v8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi @@ -154,6 +154,13 @@ regulator-always-on; }; + ldo2_reg: LDO2 { + regulator-name = "vdd_ldo2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + ldo3_reg: LDO3 { regulator-name = "vddq_mmc0"; regulator-min-microvolt = <1800000>; @@ -216,10 +223,10 @@ }; ldo12_reg: LDO12 { + /* Unused */ regulator-name = "vdd_ldo12"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2375000>; }; ldo13_reg: LDO13 { @@ -228,6 +235,13 @@ regulator-max-microvolt = <2800000>; }; + ldo14_reg: LDO14 { + /* Unused */ + regulator-name = "vdd_ldo14"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + ldo15_reg: LDO15 { regulator-name = "vdd_ldo15"; regulator-min-microvolt = <3300000>; @@ -236,10 +250,10 @@ }; ldo16_reg: LDO16 { + /* Unused */ regulator-name = "vdd_ldo16"; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; }; ldo17_reg: LDO17 { @@ -261,20 +275,139 @@ regulator-max-microvolt = <2800000>; }; - ldo24_reg: LDO24 { - regulator-name = "tsp_io"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; + ldo20_reg: LDO20 { + /* Unused */ + regulator-name = "vdd_ldo20"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo21_reg: LDO21 { + /* Unused */ + regulator-name = "vdd_ldo21"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo22_reg: LDO22 { + /* Unused */ + regulator-name = "vdd_ldo22"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2375000>; + }; + + ldo23_reg: LDO23 { + regulator-name = "vdd_mifs"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; regulator-always-on; }; + ldo24_reg: LDO24 { + /* Unused */ + regulator-name = "vdd_ldo24"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo25_reg: LDO25 { + /* Unused */ + regulator-name = "vdd_ldo25"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + ldo26_reg: LDO26 { + /* Used on XU3, XU3-Lite and XU4 */ regulator-name = "vdd_ldo26"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo27_reg: LDO27 { + regulator-name = "vdd_g3ds"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; regulator-always-on; }; + ldo28_reg: LDO28 { + /* Used on XU3 */ + regulator-name = "vdd_ldo28"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo29_reg: LDO29 { + /* Unused */ + regulator-name = "vdd_ldo29"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo30_reg: LDO30 { + /* Unused */ + regulator-name = "vdd_ldo30"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo31_reg: LDO31 { + /* Unused */ + regulator-name = "vdd_ldo31"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo32_reg: LDO32 { + /* Unused */ + regulator-name = "vdd_ldo32"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo33_reg: LDO33 { + /* Unused */ + regulator-name = "vdd_ldo33"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo34_reg: LDO34 { + /* Unused */ + regulator-name = "vdd_ldo34"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo35_reg: LDO35 { + /* Unused */ + regulator-name = "vdd_ldo35"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2375000>; + }; + + ldo36_reg: LDO36 { + /* Unused */ + regulator-name = "vdd_ldo36"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo37_reg: LDO37 { + /* Unused */ + regulator-name = "vdd_ldo37"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo38_reg: LDO38 { + /* Unused */ + regulator-name = "vdd_ldo38"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + buck1_reg: BUCK1 { regulator-name = "vdd_mif"; regulator-min-microvolt = <800000>; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -367,6 +367,12 @@ status = "okay"; }; +&ldo26_reg { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; +}; + &mixer { status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts @@ -49,6 +49,12 @@ }; }; +&ldo28_reg { + regulator-name = "dp_p3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; +}; + &pwm { /* * PWM 0 -- fan diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -153,7 +153,7 @@ &clock_audss { assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>; - assigned-clock-parents = <&clock CLK_FOUT_EPLL>; + assigned-clock-parents = <&clock CLK_MAU_EPLL>; }; &cpu0 { @@ -312,6 +312,7 @@ regulator-name = "vdd_1v35"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; + regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; @@ -333,6 +334,7 @@ regulator-name = "vdd_2v"; regulator-min-microvolt = <2000000>; regulator-max-microvolt = <2000000>; + regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; @@ -343,6 +345,7 @@ regulator-name = "vdd_1v8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi @@ -277,10 +277,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; - port { - etb0_in_port: endpoint@0 { - slave-mode; - remote-endpoint = <&replicator0_out_port0>; + in-ports { + port { + etb0_in_port: endpoint@0 { + remote-endpoint = <&replicator0_out_port0>; + }; }; }; }; @@ -291,10 +292,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; - port { - etb1_in_port: endpoint@0 { - slave-mode; - remote-endpoint = <&replicator1_out_port0>; + in-ports { + port { + etb1_in_port: endpoint@0 { + remote-endpoint = <&replicator1_out_port0>; + }; }; }; }; @@ -305,10 +307,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; - port { - etb2_in_port: endpoint@0 { - slave-mode; - remote-endpoint = <&replicator2_out_port0>; + in-ports { + port { + etb2_in_port: endpoint@0 { + remote-endpoint = <&replicator2_out_port0>; + }; }; }; }; @@ -319,10 +322,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; - port { - etb3_in_port: endpoint@0 { - slave-mode; - remote-endpoint = <&replicator3_out_port0>; + in-ports { + port { + etb3_in_port: endpoint@0 { + remote-endpoint = <&replicator3_out_port0>; + }; }; }; }; @@ -333,10 +337,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; - port { - tpiu_in_port: endpoint@0 { - slave-mode; - remote-endpoint = <&funnel4_out_port0>; + in-ports { + port { + tpiu_in_port: endpoint@0 { + remote-endpoint = <&funnel4_out_port0>; + }; }; }; }; @@ -347,7 +352,7 @@ */ compatible = "arm,coresight-replicator"; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; @@ -365,12 +370,11 @@ remote-endpoint = <&funnel4_in_port0>; }; }; + }; - /* replicator input port */ - port@2 { - reg = <0>; + in-ports { + port { replicator0_in_port0: endpoint { - slave-mode; remote-endpoint = <&funnel0_out_port0>; }; }; @@ -383,7 +387,7 @@ */ compatible = "arm,coresight-replicator"; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; @@ -401,12 +405,11 @@ remote-endpoint = <&funnel4_in_port1>; }; }; + }; - /* replicator input port */ - port@2 { - reg = <0>; + in-ports { + port { replicator1_in_port0: endpoint { - slave-mode; remote-endpoint = <&funnel1_out_port0>; }; }; @@ -419,11 +422,10 @@ */ compatible = "arm,coresight-replicator"; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; - /* replicator output ports */ port@0 { reg = <0>; replicator2_out_port0: endpoint { @@ -437,12 +439,11 @@ remote-endpoint = <&funnel4_in_port2>; }; }; + }; - /* replicator input port */ - port@2 { - reg = <0>; + in-ports { + port { replicator2_in_port0: endpoint { - slave-mode; remote-endpoint = <&funnel2_out_port0>; }; }; @@ -455,11 +456,10 @@ */ compatible = "arm,coresight-replicator"; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; - /* replicator output ports */ port@0 { reg = <0>; replicator3_out_port0: endpoint { @@ -473,12 +473,11 @@ remote-endpoint = <&funnel4_in_port3>; }; }; + }; - /* replicator input port */ - port@2 { - reg = <0>; + in-ports { + port { replicator3_in_port0: endpoint { - slave-mode; remote-endpoint = <&funnel3_out_port0>; }; }; @@ -491,48 +490,43 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* funnel output port */ - port@0 { - reg = <0>; + out-ports { + port { funnel0_out_port0: endpoint { remote-endpoint = <&replicator0_in_port0>; }; }; + }; - /* funnel input ports */ - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; funnel0_in_port0: endpoint { - slave-mode; remote-endpoint = <&ptm0_out_port>; }; }; - port@2 { + port@1 { reg = <1>; funnel0_in_port1: endpoint { - slave-mode; remote-endpoint = <&ptm1_out_port>; }; }; - port@3 { + port@2 { reg = <2>; funnel0_in_port2: endpoint { - slave-mode; remote-endpoint = <&ptm2_out_port>; }; }; - port@4 { + port@3 { reg = <3>; funnel0_in_port3: endpoint { - slave-mode; remote-endpoint = <&ptm3_out_port>; }; }; @@ -545,48 +539,43 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* funnel output port */ - port@0 { - reg = <0>; + out-ports { + port { funnel1_out_port0: endpoint { remote-endpoint = <&replicator1_in_port0>; }; }; + }; - /* funnel input ports */ - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; funnel1_in_port0: endpoint { - slave-mode; remote-endpoint = <&ptm4_out_port>; }; }; - port@2 { + port@1 { reg = <1>; funnel1_in_port1: endpoint { - slave-mode; remote-endpoint = <&ptm5_out_port>; }; }; - port@3 { + port@2 { reg = <2>; funnel1_in_port2: endpoint { - slave-mode; remote-endpoint = <&ptm6_out_port>; }; }; - port@4 { + port@3 { reg = <3>; funnel1_in_port3: endpoint { - slave-mode; remote-endpoint = <&ptm7_out_port>; }; }; @@ -599,48 +588,43 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* funnel output port */ - port@0 { - reg = <0>; + out-ports { + port { funnel2_out_port0: endpoint { remote-endpoint = <&replicator2_in_port0>; }; }; + }; - /* funnel input ports */ - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; funnel2_in_port0: endpoint { - slave-mode; remote-endpoint = <&ptm8_out_port>; }; }; - port@2 { + port@1 { reg = <1>; funnel2_in_port1: endpoint { - slave-mode; remote-endpoint = <&ptm9_out_port>; }; }; - port@3 { + port@2 { reg = <2>; funnel2_in_port2: endpoint { - slave-mode; remote-endpoint = <&ptm10_out_port>; }; }; - port@4 { + port@3 { reg = <3>; funnel2_in_port3: endpoint { - slave-mode; remote-endpoint = <&ptm11_out_port>; }; }; @@ -653,48 +637,43 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* funnel output port */ - port@0 { - reg = <0>; + out-ports { + port { funnel3_out_port0: endpoint { remote-endpoint = <&replicator3_in_port0>; }; }; + }; - /* funnel input ports */ - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; funnel3_in_port0: endpoint { - slave-mode; remote-endpoint = <&ptm12_out_port>; }; }; - port@2 { + port@1 { reg = <1>; funnel3_in_port1: endpoint { - slave-mode; remote-endpoint = <&ptm13_out_port>; }; }; - port@3 { + port@2 { reg = <2>; funnel3_in_port2: endpoint { - slave-mode; remote-endpoint = <&ptm14_out_port>; }; }; - port@4 { + port@3 { reg = <3>; funnel3_in_port3: endpoint { - slave-mode; remote-endpoint = <&ptm15_out_port>; }; }; @@ -707,50 +686,45 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* funnel output port */ - port@0 { - reg = <0>; + out-ports { + port { funnel4_out_port0: endpoint { remote-endpoint = <&tpiu_in_port>; }; }; + }; - /* funnel input ports */ - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; funnel4_in_port0: endpoint { - slave-mode; remote-endpoint = <&replicator0_out_port1>; }; }; - port@2 { + port@1 { reg = <1>; funnel4_in_port1: endpoint { - slave-mode; remote-endpoint = <&replicator1_out_port1>; }; }; - port@3 { + port@2 { reg = <2>; funnel4_in_port2: endpoint { - slave-mode; remote-endpoint = <&replicator2_out_port1>; }; }; - port@4 { + port@3 { reg = <3>; funnel4_in_port3: endpoint { - slave-mode; remote-endpoint = <&replicator3_out_port1>; }; @@ -765,9 +739,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU0>; - port { - ptm0_out_port: endpoint { - remote-endpoint = <&funnel0_in_port0>; + out-ports { + port { + ptm0_out_port: endpoint { + remote-endpoint = <&funnel0_in_port0>; + }; }; }; }; @@ -779,9 +755,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU1>; - port { - ptm1_out_port: endpoint { - remote-endpoint = <&funnel0_in_port1>; + out-ports { + port { + ptm1_out_port: endpoint { + remote-endpoint = <&funnel0_in_port1>; + }; }; }; }; @@ -793,9 +771,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU2>; - port { - ptm2_out_port: endpoint { - remote-endpoint = <&funnel0_in_port2>; + out-ports { + port { + ptm2_out_port: endpoint { + remote-endpoint = <&funnel0_in_port2>; + }; }; }; }; @@ -807,9 +787,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU3>; - port { - ptm3_out_port: endpoint { - remote-endpoint = <&funnel0_in_port3>; + out-ports { + port { + ptm3_out_port: endpoint { + remote-endpoint = <&funnel0_in_port3>; + }; }; }; }; @@ -821,9 +803,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU4>; - port { - ptm4_out_port: endpoint { - remote-endpoint = <&funnel1_in_port0>; + out-ports { + port { + ptm4_out_port: endpoint { + remote-endpoint = <&funnel1_in_port0>; + }; }; }; }; @@ -835,9 +819,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU5>; - port { - ptm5_out_port: endpoint { - remote-endpoint = <&funnel1_in_port1>; + out-ports { + port { + ptm5_out_port: endpoint { + remote-endpoint = <&funnel1_in_port1>; + }; }; }; }; @@ -849,9 +835,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU6>; - port { - ptm6_out_port: endpoint { - remote-endpoint = <&funnel1_in_port2>; + out-ports { + port { + ptm6_out_port: endpoint { + remote-endpoint = <&funnel1_in_port2>; + }; }; }; }; @@ -863,9 +851,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU7>; - port { - ptm7_out_port: endpoint { - remote-endpoint = <&funnel1_in_port3>; + out-ports { + port { + ptm7_out_port: endpoint { + remote-endpoint = <&funnel1_in_port3>; + }; }; }; }; @@ -877,9 +867,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU8>; - port { - ptm8_out_port: endpoint { - remote-endpoint = <&funnel2_in_port0>; + out-ports { + port { + ptm8_out_port: endpoint { + remote-endpoint = <&funnel2_in_port0>; + }; }; }; }; @@ -890,9 +882,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU9>; - port { - ptm9_out_port: endpoint { - remote-endpoint = <&funnel2_in_port1>; + out-ports { + port { + ptm9_out_port: endpoint { + remote-endpoint = <&funnel2_in_port1>; + }; }; }; }; @@ -904,9 +898,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU10>; - port { - ptm10_out_port: endpoint { - remote-endpoint = <&funnel2_in_port2>; + out-ports { + port { + ptm10_out_port: endpoint { + remote-endpoint = <&funnel2_in_port2>; + }; }; }; }; @@ -918,9 +914,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU11>; - port { - ptm11_out_port: endpoint { - remote-endpoint = <&funnel2_in_port3>; + out-ports { + port { + ptm11_out_port: endpoint { + remote-endpoint = <&funnel2_in_port3>; + }; }; }; }; @@ -932,9 +930,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU12>; - port { - ptm12_out_port: endpoint { - remote-endpoint = <&funnel3_in_port0>; + out-ports { + port { + ptm12_out_port: endpoint { + remote-endpoint = <&funnel3_in_port0>; + }; }; }; }; @@ -946,9 +946,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU13>; - port { - ptm13_out_port: endpoint { - remote-endpoint = <&funnel3_in_port1>; + out-ports { + port { + ptm13_out_port: endpoint { + remote-endpoint = <&funnel3_in_port1>; + }; }; }; }; @@ -960,9 +962,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU14>; - port { - ptm14_out_port: endpoint { - remote-endpoint = <&funnel3_in_port2>; + out-ports { + port { + ptm14_out_port: endpoint { + remote-endpoint = <&funnel3_in_port2>; + }; }; }; }; @@ -974,9 +978,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU15>; - port { - ptm15_out_port: endpoint { - remote-endpoint = <&funnel3_in_port3>; + out-ports { + port { + ptm15_out_port: endpoint { + remote-endpoint = <&funnel3_in_port3>; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi @@ -164,7 +164,7 @@ reg = <0x00210000 0x10000>; ranges; - cspi1: cspi@213000 { + cspi1: spi@213000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx1-cspi"; @@ -186,7 +186,7 @@ status = "disabled"; }; - cspi2: cspi@219000 { + cspi2: spi@219000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx1-cspi"; diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts @@ -58,7 +58,7 @@ status = "okay"; }; - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -25,7 +25,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; @@ -59,7 +59,7 @@ }; }; - ssp1: ssp@80034000 { + ssp1: spi@80034000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx23-spi"; diff --git a/arch/arm/boot/dts/imx23-sansa.dts b/arch/arm/boot/dts/imx23-sansa.dts @@ -55,7 +55,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; @@ -65,7 +65,7 @@ status = "okay"; }; - ssp1: ssp@80034000 { + ssp1: spi@80034000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc1_8bit_pins_a>; diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/imx23-stmp378x_devb.dts @@ -22,7 +22,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; diff --git a/arch/arm/boot/dts/imx23-xfi3.dts b/arch/arm/boot/dts/imx23-xfi3.dts @@ -54,7 +54,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; @@ -64,7 +64,7 @@ status = "okay"; }; - ssp1: ssp@80034000 { + ssp1: spi@80034000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc1_4bit_pins_a>; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi @@ -93,7 +93,7 @@ status = "disabled"; }; - ssp0: ssp@80010000 { + ssp0: spi@80010000 { reg = <0x80010000 0x2000>; interrupts = <15>; clocks = <&clks 33>; @@ -457,7 +457,7 @@ status = "disabled"; }; - ssp1: ssp@80034000 { + ssp1: spi@80034000 { reg = <0x80034000 0x2000>; interrupts = <2>; clocks = <&clks 33>; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi @@ -168,7 +168,7 @@ status = "disabled"; }; - spi1: cspi@43fa4000 { + spi1: spi@43fa4000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; @@ -209,7 +209,7 @@ reg = <0x50000000 0x40000>; ranges; - spi3: cspi@50004000 { + spi3: spi@50004000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; @@ -238,7 +238,7 @@ status = "disabled"; }; - spi2: cspi@50010000 { + spi2: spi@50010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi @@ -209,7 +209,7 @@ status = "disabled"; }; - cspi1: cspi@1000e000 { + cspi1: spi@1000e000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx27-cspi"; @@ -221,7 +221,7 @@ status = "disabled"; }; - cspi2: cspi@1000f000 { + cspi2: spi@1000f000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx27-cspi"; @@ -373,7 +373,7 @@ status = "disabled"; }; - cspi3: cspi@10017000 { + cspi3: spi@10017000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx27-cspi"; diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts @@ -18,7 +18,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a @@ -27,7 +27,7 @@ status = "okay"; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { compatible = "fsl,imx28-spi"; pinctrl-names = "default"; pinctrl-0 = <&spi2_pins_a>; diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts @@ -18,7 +18,7 @@ status = "okay"; }; - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>; @@ -26,7 +26,7 @@ status = "okay"; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>; diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts @@ -66,7 +66,7 @@ }; - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a diff --git a/arch/arm/boot/dts/imx28-duckbill-2-485.dts b/arch/arm/boot/dts/imx28-duckbill-2-485.dts @@ -25,7 +25,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_8bit_pins_a @@ -36,7 +36,7 @@ non-removable; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc2_4bit_pins_b diff --git a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts @@ -26,7 +26,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_8bit_pins_a @@ -37,7 +37,7 @@ non-removable; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc2_4bit_pins_b diff --git a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts @@ -29,7 +29,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_8bit_pins_a @@ -40,7 +40,7 @@ non-removable; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { compatible = "fsl,imx28-spi"; pinctrl-names = "default"; pinctrl-0 = <&spi2_pins_a>; diff --git a/arch/arm/boot/dts/imx28-duckbill-2.dts b/arch/arm/boot/dts/imx28-duckbill-2.dts @@ -25,7 +25,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_8bit_pins_a @@ -36,7 +36,7 @@ non-removable; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc2_4bit_pins_b diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts @@ -24,7 +24,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a @@ -34,7 +34,7 @@ status = "okay"; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { compatible = "fsl,imx28-spi"; pinctrl-names = "default"; pinctrl-0 = <&spi2_pins_a>; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts @@ -103,7 +103,7 @@ status = "okay"; }; - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_8bit_pins_a @@ -114,13 +114,13 @@ status = "okay"; }; - ssp1: ssp@80012000 { + ssp1: spi@80012000 { compatible = "fsl,imx28-mmc"; bus-width = <8>; wp-gpios = <&gpio0 28 0>; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-spi"; diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts @@ -41,7 +41,7 @@ }; }; - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a @@ -52,7 +52,7 @@ status = "okay"; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc2_4bit_pins_a diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts @@ -18,7 +18,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_8bit_pins_a @@ -30,7 +30,7 @@ status = "okay"; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-spi"; diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts @@ -40,7 +40,7 @@ }; - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a>; @@ -48,7 +48,7 @@ status = "okay"; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-spi"; diff --git a/arch/arm/boot/dts/imx28-ts4600.dts b/arch/arm/boot/dts/imx28-ts4600.dts @@ -25,7 +25,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi @@ -117,7 +117,7 @@ status = "disabled"; }; - ssp0: ssp@80010000 { + ssp0: spi@80010000 { #address-cells = <1>; #size-cells = <0>; reg = <0x80010000 0x2000>; @@ -128,7 +128,7 @@ status = "disabled"; }; - ssp1: ssp@80012000 { + ssp1: spi@80012000 { #address-cells = <1>; #size-cells = <0>; reg = <0x80012000 0x2000>; @@ -139,7 +139,7 @@ status = "disabled"; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { #address-cells = <1>; #size-cells = <0>; reg = <0x80014000 0x2000>; @@ -150,7 +150,7 @@ status = "disabled"; }; - ssp3: ssp@80016000 { + ssp3: spi@80016000 { #address-cells = <1>; #size-cells = <0>; reg = <0x80016000 0x2000>; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi @@ -206,7 +206,7 @@ status = "disabled"; }; - spi2: cspi@50010000 { + spi2: spi@50010000 { compatible = "fsl,imx31-cspi"; reg = <0x50010000 0x4000>; interrupts = <13>; @@ -241,7 +241,7 @@ #clock-cells = <1>; }; - spi3: cspi@53f84000 { + spi3: spi@53f84000 { compatible = "fsl,imx31-cspi"; reg = <0x53f84000 0x4000>; interrupts = <17>; diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi @@ -133,7 +133,7 @@ status = "disabled"; }; - spi1: cspi@43fa4000 { + spi1: spi@43fa4000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx35-cspi"; @@ -174,7 +174,7 @@ status = "disabled"; }; - spi2: cspi@50010000 { + spi2: spi@50010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx35-cspi"; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi @@ -140,7 +140,7 @@ status = "disabled"; }; - ecspi1: ecspi@50010000 { + ecspi1: spi@50010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi"; @@ -403,7 +403,7 @@ status = "disabled"; }; - ecspi2: ecspi@63fac000 { + ecspi2: spi@63fac000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi"; @@ -426,7 +426,7 @@ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin"; }; - cspi: cspi@63fc0000 { + cspi: spi@63fc0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx50-cspi", "fsl,imx35-cspi"; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts @@ -204,6 +204,7 @@ reg = <0>; interrupt-parent = <&gpio1>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + fsl,mc13xxx-uses-adc; fsl,mc13xxx-uses-rtc; regulators { diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts @@ -508,7 +508,7 @@ }; ds1341: rtc@68 { - compatible = "maxim,ds1341"; + compatible = "dallas,ds1341"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts b/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts @@ -342,6 +342,14 @@ vcc-supply = <&vusb2_reg>; }; +&vpu { + status = "disabled"; +}; + +&wdog1 { + status = "disabled"; +}; + &iomuxc { pinctrl_ecspi1: ecspi1grp { fsl,pins = < diff --git a/arch/arm/boot/dts/imx51-zii-scu3-esb.dts b/arch/arm/boot/dts/imx51-zii-scu3-esb.dts @@ -350,6 +350,10 @@ vcc-supply = <&vusb2_reg>; }; +&vpu { + status = "disabled"; +}; + &wdog1 { status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi @@ -197,7 +197,7 @@ status = "disabled"; }; - ecspi1: ecspi@70010000 { + ecspi1: spi@70010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx51-ecspi"; @@ -464,7 +464,7 @@ status = "disabled"; }; - ecspi2: ecspi@83fac000 { + ecspi2: spi@83fac000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx51-ecspi"; @@ -487,7 +487,7 @@ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin"; }; - cspi: cspi@83fc0000 { + cspi: spi@83fc0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx51-cspi", "fsl,imx35-cspi"; @@ -608,7 +608,7 @@ status = "disabled"; }; - vpu@83ff4000 { + vpu: vpu@83ff4000 { compatible = "fsl,imx51-vpu", "cnm,codahx4"; reg = <0x83ff4000 0x1000>; interrupts = <9>; diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts @@ -319,7 +319,6 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; - num-chipselects = <1>; cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; status = "okay"; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi @@ -259,7 +259,7 @@ status = "disabled"; }; - ecspi1: ecspi@50010000 { + ecspi1: spi@50010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi"; @@ -684,7 +684,7 @@ status = "disabled"; }; - ecspi2: ecspi@63fac000 { + ecspi2: spi@63fac000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi"; @@ -707,7 +707,7 @@ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; }; - cspi: cspi@63fc0000 { + cspi: spi@63fc0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx53-cspi", "fsl,imx35-cspi"; diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts @@ -146,7 +146,7 @@ &ecspi4 { status = "okay"; - mcp251x0: mcp251x@1 { + mcp251x0: mcp251x@0 { compatible = "microchip,mcp2515"; reg = <0>; clocks = <&clk16m>; diff --git a/arch/arm/boot/dts/imx6dl-icore-mipi.dts b/arch/arm/boot/dts/imx6dl-icore-mipi.dts @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2018 Engicam S.r.l. * Copyright (C) 2018 Amarula Solutions B.V. diff --git a/arch/arm/boot/dts/imx6dl-icore-rqs.dts b/arch/arm/boot/dts/imx6dl-icore-rqs.dts @@ -1,43 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2016 Amarula Solutions B.V. * Copyright (C) 2016 Engicam S.r.l. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6dl-icore.dts b/arch/arm/boot/dts/imx6dl-icore.dts @@ -1,43 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2016 Amarula Solutions B.V. * Copyright (C) 2016 Engicam S.r.l. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -84,6 +84,10 @@ status = "okay"; }; +&clks { + fsl,pmic-stby-poweroff; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; @@ -164,6 +168,7 @@ reg = <0x08>; interrupt-parent = <&gpio5>; interrupts = <16 8>; + fsl,pmic-stby-poweroff; regulators { reg_vddcore: sw1ab { /* VDDARM_IN */ diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts @@ -196,6 +196,8 @@ }; &pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reset_moci>; /* active-high meaning opposite of regular PERST# active-low polarity */ reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; reset-gpio-active-high; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts @@ -196,6 +196,8 @@ }; &pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reset_moci>; /* active-high meaning opposite of regular PERST# active-low polarity */ reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; reset-gpio-active-high; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts @@ -200,6 +200,8 @@ }; &pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reset_moci>; /* active-high meaning opposite of regular PERST# active-low polarity */ reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; reset-gpio-active-high; diff --git a/arch/arm/boot/dts/imx6q-icore-mipi.dts b/arch/arm/boot/dts/imx6q-icore-mipi.dts @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2017 Engicam S.r.l. * Copyright (C) 2017 Amarula Solutions B.V. @@ -8,10 +8,10 @@ /dts-v1/; #include "imx6q.dtsi" -#include "imx6qdl-icore.dtsi" +#include "imx6qdl-icore-1.5.dtsi" / { - model = "Engicam i.CoreM6 Quad/Dual MIPI Starter Kit"; + model = "Engicam i.CoreM6 1.5 Quad/Dual MIPI Starter Kit"; compatible = "engicam,imx6-icore", "fsl,imx6q"; }; diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap10.dts b/arch/arm/boot/dts/imx6q-icore-ofcap10.dts @@ -1,43 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2016 Amarula Solutions B.V. * Copyright (C) 2016 Engicam S.r.l. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap12.dts b/arch/arm/boot/dts/imx6q-icore-ofcap12.dts @@ -1,43 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2016 Amarula Solutions B.V. * Copyright (C) 2016 Engicam S.r.l. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-icore-rqs.dts b/arch/arm/boot/dts/imx6q-icore-rqs.dts @@ -1,42 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2015 Amarula Solutions B.V. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright (C) 2015 Engicam S.r.l. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-icore.dts b/arch/arm/boot/dts/imx6q-icore.dts @@ -1,43 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2016 Amarula Solutions B.V. * Copyright (C) 2016 Engicam S.r.l. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi @@ -163,7 +163,7 @@ aips-bus@2000000 { /* AIPS1 */ spba-bus@2000000 { - ecspi5: ecspi@2018000 { + ecspi5: spi@2018000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -482,10 +482,6 @@ }; &iomuxc { - /* pins used on module */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reset_moci>; - pinctrl_apalis_gpio1: gpio2io04grp { fsl,pins = < MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x130b0 diff --git a/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi b/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018 Jacopo Mondi <jacopo@jmondi.org> + */ + +#include "imx6qdl-icore.dtsi" + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + >; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET_REF>; + phy-mode = "rmii"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi @@ -1,42 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2015 Amarula Solutions B.V. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright (C) 2015 Engicam S.r.l. */ #include <dt-bindings/gpio/gpio.h> @@ -316,7 +281,7 @@ }; &iomuxc { - pinctrl_audmux: audmux { + pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x110b0 diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi @@ -1,43 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2016 Amarula Solutions B.V. * Copyright (C) 2016 Engicam S.r.l. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> @@ -310,7 +274,7 @@ }; &iomuxc { - pinctrl_audmux: audmux { + pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x110b0 @@ -349,7 +313,7 @@ >; }; - pinctrl_gpmi_nand: gpmi-nand { + pinctrl_gpmi_nand: gpminandgrp { fsl,pins = < MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -4,6 +4,7 @@ // Copyright 2011 Linaro Ltd. #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { chosen { @@ -25,6 +26,47 @@ }; }; + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + home { + label = "Home"; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + wakeup-source; + }; + + back { + label = "Back"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + linux,code = <KEY_BACK>; + wakeup-source; + }; + + program { + label = "Program"; + gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + linux,code = <KEY_PROGRAM>; + wakeup-source; + }; + + volume-up { + label = "Volume Up"; + gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + wakeup-source; + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio5 14 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + wakeup-source; + }; + }; + clocks { codec_osc: anaclk2 { compatible = "fixed-clock"; @@ -375,6 +417,15 @@ VLC-supply = <&reg_audio>; }; + touchscreen@4 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_egalax_int>; + interrupt-parent = <&gpio2>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; + }; }; &i2c3 { @@ -410,6 +461,12 @@ >; }; + pinctrl_egalax_int: egalax-intgrp { + fsl,pins = < + MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0xb0b1 + >; + }; + pinctrl_enet: enetgrp { fsl,pins = < MX6QDL_PAD_KEY_COL1__ENET_MDIO 0x1b0b0 @@ -446,6 +503,16 @@ >; }; + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x1b0b0 + MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0 + MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 + MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0 + >; + }; + pinctrl_gpio_leds: gpioledsgrp { fsl,pins = < MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x80000000 diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -8,6 +8,10 @@ #include <dt-bindings/gpio/gpio.h> / { + chosen { + stdout-path = &uart1; + }; + sound { compatible = "fsl,imx6-wandboard-sgtl5000", "fsl,imx-audio-sgtl5000"; diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -813,6 +813,10 @@ status = "okay"; }; +&snvs_rtc { + status = "disabled"; +}; + &ssi1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi @@ -317,7 +317,7 @@ status = "disabled"; }; - ecspi1: ecspi@2008000 { + ecspi1: spi@2008000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; @@ -331,7 +331,7 @@ status = "disabled"; }; - ecspi2: ecspi@200c000 { + ecspi2: spi@200c000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; @@ -345,7 +345,7 @@ status = "disabled"; }; - ecspi3: ecspi@2010000 { + ecspi3: spi@2010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; @@ -359,7 +359,7 @@ status = "disabled"; }; - ecspi4: ecspi@2014000 { + ecspi4: spi@2014000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi @@ -168,7 +168,7 @@ status = "disabled"; }; - ecspi1: ecspi@2008000 { + ecspi1: spi@2008000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; @@ -180,7 +180,7 @@ status = "disabled"; }; - ecspi2: ecspi@200c000 { + ecspi2: spi@200c000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; @@ -192,7 +192,7 @@ status = "disabled"; }; - ecspi3: ecspi@2010000 { + ecspi3: spi@2010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; @@ -204,7 +204,7 @@ status = "disabled"; }; - ecspi4: ecspi@2014000 { + ecspi4: spi@2014000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi @@ -375,10 +375,12 @@ reg = <0x0209c000 0x4000>; interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_GPIO1>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 94 7>, <&iomuxc 7 25 25>; }; gpio2: gpio@20a0000 { @@ -386,10 +388,12 @@ reg = <0x020a0000 0x4000>; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_GPIO2>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 50 32>; }; gpio3: gpio@20a4000 { @@ -397,10 +401,14 @@ reg = <0x020a4000 0x4000>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_GPIO3>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 82 12>, <&iomuxc 12 103 4>, + <&iomuxc 16 101 2>, <&iomuxc 18 5 1>, + <&iomuxc 21 6 11>; }; gpio4: gpio@20a8000 { @@ -408,10 +416,20 @@ reg = <0x020a8000 0x4000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_GPIO4>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 17 8>, <&iomuxc 8 107 8>, + <&iomuxc 16 151 1>, <&iomuxc 17 149 1>, + <&iomuxc 18 146 1>, <&iomuxc 19 144 1>, + <&iomuxc 20 142 1>, <&iomuxc 21 143 1>, + <&iomuxc 22 150 1>, <&iomuxc 23 148 1>, + <&iomuxc 24 147 1>, <&iomuxc 25 145 1>, + <&iomuxc 26 152 1>, <&iomuxc 27 125 1>, + <&iomuxc 28 131 1>, <&iomuxc 29 134 1>, + <&iomuxc 30 129 1>, <&iomuxc 31 133 1>; }; gpio5: gpio@20ac000 { @@ -419,10 +437,22 @@ reg = <0x020ac000 0x4000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_GPIO5>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 135 1>, <&iomuxc 1 128 1>, + <&iomuxc 2 132 1>, <&iomuxc 3 130 1>, + <&iomuxc 4 127 1>, <&iomuxc 5 126 1>, + <&iomuxc 6 120 1>, <&iomuxc 7 123 1>, + <&iomuxc 8 118 1>, <&iomuxc 9 122 1>, + <&iomuxc 10 124 1>, <&iomuxc 11 117 1>, + <&iomuxc 12 121 1>, <&iomuxc 13 119 1>, + <&iomuxc 14 116 1>, <&iomuxc 15 115 1>, + <&iomuxc 16 140 2>, <&iomuxc 18 136 1>, + <&iomuxc 19 138 1>, <&iomuxc 20 139 1>, + <&iomuxc 21 137 1>; }; gpio6: gpio@20b0000 { @@ -430,6 +460,7 @@ reg = <0x020b0000 0x4000>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_GPIO6>; gpio-controller; #gpio-cells = <2>; interrupt-controller; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -40,12 +40,14 @@ label = "Volume Up"; gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; + wakeup-source; }; volume-down { label = "Volume Down"; gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi @@ -268,7 +268,7 @@ status = "disabled"; }; - ecspi1: ecspi@2008000 { + ecspi1: spi@2008000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; @@ -280,7 +280,7 @@ status = "disabled"; }; - ecspi2: ecspi@200c000 { + ecspi2: spi@200c000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; @@ -292,7 +292,7 @@ status = "disabled"; }; - ecspi3: ecspi@2010000 { + ecspi3: spi@2010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; @@ -304,7 +304,7 @@ status = "disabled"; }; - ecspi4: ecspi@2014000 { + ecspi4: spi@2014000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; @@ -1079,7 +1079,7 @@ status = "disabled"; }; - qspi1: qspi@21e0000 { + qspi1: spi@21e0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-qspi"; @@ -1092,7 +1092,7 @@ status = "disabled"; }; - qspi2: qspi@21e4000 { + qspi2: spi@21e4000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-qspi"; @@ -1273,7 +1273,7 @@ status = "disabled"; }; - ecspi5: ecspi@228c000 { + ecspi5: spi@228c000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts @@ -0,0 +1,390 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Digi International's ConnectCore6UL SBC Pro board device tree source + * + * Copyright 2018 Digi International, Inc. + * + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "imx6ul.dtsi" +#include "imx6ul-ccimx6ulsom.dtsi" + +/ { + model = "Digi International ConnectCore 6UL SBC Pro."; + compatible = "digi,ccimx6ulsbcpro", "digi,ccimx6ulsom", "fsl,imx6ul"; + + lcd_backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm5 0 50000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1 { + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&adc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc1>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <&ext_3v3>; + status = "okay"; +}; + +/* CAN2 is multiplexed with UART2 RTS/CTS */ +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <&ext_3v3>; + status = "disabled"; +}; + +&ecspi1 { + cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_master>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <&ethphy0>; + status = "okay"; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>; + phy-mode = "rmii"; + phy-handle = <&ethphy1>; + phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>; + phy-reset-duration = <26>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + smsc,disable-energy-detect; + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + smsc,disable-energy-detect; + reg = <1>; + }; + }; +}; + +&gpio5 { + emmc-usd-mux { + gpio-hog; + gpios = <1 GPIO_ACTIVE_LOW>; + output-high; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat0_17 + &pinctrl_lcdif_clken + &pinctrl_lcdif_hvsync>; + lcd-supply = <&ldo4_ext>; /* BU90T82 LVDS bridge power */ + status = "okay"; +}; + +&ldo4_ext { + regulator-max-microvolt = <1800000>; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&pwm5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm5>; + status = "okay"; +}; + +&pwm6 { + status = "okay"; +}; + +&pwm7 { + status = "okay"; +}; + +&pwm8 { + status = "okay"; +}; + +&sai2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_sai2>; + pinctrl-1 = <&pinctrl_sai2_sleep>; + assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>, + <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>, + <&clks IMX6UL_CLK_SAI2>; + assigned-clock-rates = <0>, <786432000>, <12288000>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + status = "okay"; +}; + +/* UART2 RTS/CTS muxed with CAN2 */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_4wires>; + uart-has-rtscts; + status = "okay"; +}; + +/* UART3 RTS/CTS muxed with CAN 1 */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_2wires>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + vbus-supply = <&reg_usb_otg1_vbus>; + pinctrl-0 = <&pinctrl_usbotg1>; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +/* USDHC2 (microSD conflicts with eMMC) */ +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + no-1-8-v; + broken-cd; /* no carrier detect line (use polling) */ + status = "okay"; +}; + +&iomuxc { + pinctrl_adc1: adc1grp { + fsl,pins = < + /* EXP_GPIO_2 -> GPIO1_3/ADC1_IN3 */ + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + >; + }; + + pinctrl_ecspi1_master: ecspi1grp1 { + fsl,pins = < + MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x10b0 + MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x10b0 + MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x10b0 + MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x10b0 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x40017051 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x40017051 + >; + }; + + pinctrl_enet2_mdio: mdioenet2grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 + >; + }; + + pinctrl_flexcan1: flexcan1grp{ + fsl,pins = < + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020 + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020 + >; + }; + pinctrl_flexcan2: flexcan2grp{ + fsl,pins = < + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 + >; + }; + + pinctrl_lcdif_dat0_17: lcdifdatgrp0-17 { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79 + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79 + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79 + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79 + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79 + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79 + >; + }; + + pinctrl_lcdif_clken: lcdifctrlgrp1 { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x17050 + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79 + >; + }; + + pinctrl_lcdif_hvsync: lcdifctrlgrp2 { + fsl,pins = < + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79 + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO05__PWM4_OUT 0x110b0 + >; + }; + + pinctrl_pwm5: pwm5grp { + fsl,pins = < + MX6UL_PAD_NAND_DQS__PWM5_OUT 0x110b0 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088 + MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088 + MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088 + MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088 + MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088 + /* Interrupt */ + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x10b0 + >; + }; + + pinctrl_sai2_sleep: sai2grp-sleep { + fsl,pins = < + MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15 0x3000 + MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x3000 + MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x3000 + MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x3000 + /* Interrupt */ + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x3000 + >; + }; + + pinctrl_uart2_4wires: uart2grp-4wires { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 + MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 + MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x1b0b1 + MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS 0x1b0b1 + >; + }; + + pinctrl_uart3_2wires: uart3grp-2wires { + fsl,pins = < + MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 + MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1 + MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17059 + MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x10039 + MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17059 + /* Mux selector between eMMC/SD# */ + MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x79 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059 + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x17059 + MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC 0x17059 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-geam.dts b/arch/arm/boot/dts/imx6ul-geam.dts @@ -1,43 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2016 Amarula Solutions B.V. * Copyright (C) 2016 Engicam S.r.l. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -328,7 +292,7 @@ >; }; - pinctrl_gpmi_nand: gpmi-nand { + pinctrl_gpmi_nand: gpminandgrp { fsl,pins = < MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1 MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1 diff --git a/arch/arm/boot/dts/imx6ul-isiot-emmc.dts b/arch/arm/boot/dts/imx6ul-isiot-emmc.dts @@ -1,43 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2016 Amarula Solutions B.V. * Copyright (C) 2016 Engicam S.r.l. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -50,28 +14,5 @@ }; &usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; - bus-width = <8>; - no-1-8-v; status = "okay"; }; - -&iomuxc { - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17070 - MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x10070 - MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17070 - MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17070 - MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17070 - MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17070 - MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17070 - MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17070 - MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17070 - MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17070 - MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x17070 - >; - }; -}; diff --git a/arch/arm/boot/dts/imx6ul-isiot-nand.dts b/arch/arm/boot/dts/imx6ul-isiot-nand.dts @@ -1,43 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2016 Amarula Solutions B.V. * Copyright (C) 2016 Engicam S.r.l. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -50,30 +14,5 @@ }; &gpmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpmi_nand>; - nand-on-flash-bbt; status = "okay"; }; - -&iomuxc { - pinctrl_gpmi_nand: gpmi-nand { - fsl,pins = < - MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1 - MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1 - MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1 - MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000 - MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1 - MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1 - MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1 - MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1 - MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1 - MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1 - MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1 - MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1 - MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1 - MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1 - MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1 - >; - }; -}; diff --git a/arch/arm/boot/dts/imx6ul-isiot.dtsi b/arch/arm/boot/dts/imx6ul-isiot.dtsi @@ -1,43 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2016 Amarula Solutions B.V. * Copyright (C) 2016 Engicam S.r.l. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> @@ -133,6 +97,13 @@ }; }; +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + status = "disabled"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -243,6 +214,15 @@ status = "okay"; }; +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; + bus-width = <8>; + no-1-8-v; + status = "disabled"; +}; + &iomuxc { pinctrl_enet1: enet1grp { fsl,pins = < @@ -259,6 +239,26 @@ >; }; + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1 + MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1 + MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1 + MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000 + MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1 + MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1 + MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1 + MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1 + MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1 + MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1 + MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1 + MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1 + MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1 + MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1 + MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 @@ -366,4 +366,20 @@ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 >; }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17070 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x10070 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17070 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17070 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17070 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17070 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17070 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17070 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17070 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17070 + MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x17070 + >; + }; }; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi @@ -89,6 +89,8 @@ "pll1_sys"; arm-supply = <&reg_arm>; soc-supply = <&reg_soc>; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; }; }; @@ -156,7 +158,6 @@ compatible = "arm,cortex-a7-pmu"; interrupt-parent = <&gpc>; interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; }; soc { @@ -218,7 +219,7 @@ reg = <0x02000000 0x40000>; ranges; - ecspi1: ecspi@2008000 { + ecspi1: spi@2008000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; @@ -230,7 +231,7 @@ status = "disabled"; }; - ecspi2: ecspi@200c000 { + ecspi2: spi@200c000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; @@ -242,7 +243,7 @@ status = "disabled"; }; - ecspi3: ecspi@2010000 { + ecspi3: spi@2010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; @@ -254,7 +255,7 @@ status = "disabled"; }; - ecspi4: ecspi@2014000 { + ecspi4: spi@2014000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; @@ -918,6 +919,17 @@ reg = <0x021b0000 0x4000>; }; + weim: weim@21b8000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,imx6ul-weim", "fsl,imx6q-weim"; + reg = <0x021b8000 0x4000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_EIM>; + fsl,weim-cs-gpr = <&gpr>; + status = "disabled"; + }; + ocotp: ocotp-ctrl@21bc000 { #address-cells = <1>; #size-cells = <1>; @@ -932,6 +944,10 @@ tempmon_temp_grade: temp-grade@20 { reg = <0x20 4>; }; + + cpu_speed_grade: speed-grade@10 { + reg = <0x10 4>; + }; }; lcdif: lcdif@21c8000 { @@ -945,7 +961,7 @@ status = "disabled"; }; - qspi: qspi@21e0000 { + qspi: spi@21e0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi"; diff --git a/arch/arm/boot/dts/imx6ull-14x14-evk.dts b/arch/arm/boot/dts/imx6ull-14x14-evk.dts @@ -45,7 +45,7 @@ #include "imx6ul-14x14-evk.dtsi" / { - model = "Freescale i.MX6 UlltraLite 14x14 EVK Board"; + model = "Freescale i.MX6 UltraLiteLite 14x14 EVK Board"; compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull"; }; diff --git a/arch/arm/boot/dts/imx6ull-pinfunc.h b/arch/arm/boot/dts/imx6ull-pinfunc.h @@ -14,14 +14,38 @@ * The pin function ID is a tuple of * <mux_reg conf_reg input_reg mux_mode input_val> */ +/* signals common for i.MX6UL and i.MX6ULL */ +#undef MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX +#define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX 0x00BC 0x0348 0x0644 0x0 0x6 +#undef MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX +#define MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x00C0 0x034C 0x0644 0x0 0x7 +#undef MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS +#define MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS 0x00CC 0x0358 0x0640 0x1 0x5 +#undef MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS +#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS 0x00D0 0x035C 0x0640 0x1 0x6 +#undef MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS +#define MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS 0x01EC 0x0478 0x0640 0x8 0x7 + +/* signals for i.MX6ULL only */ +#define MX6ULL_PAD_UART1_TX_DATA__UART5_DCE_TX 0x0084 0x0310 0x0000 0x9 0x0 #define MX6ULL_PAD_UART1_TX_DATA__UART5_DTE_RX 0x0084 0x0310 0x0644 0x9 0x4 #define MX6ULL_PAD_UART1_RX_DATA__UART5_DCE_RX 0x0088 0x0314 0x0644 0x9 0x5 -#define MX6ULL_PAD_UART1_CTS_B__UART5_DCE_RTS 0x008C 0x0318 0x0640 0x9 0x3 -#define MX6ULL_PAD_UART1_RTS_B__UART5_DTE_RTS 0x0090 0x031C 0x0640 0x9 0x4 -#define MX6ULL_PAD_UART5_TX_DATA__UART5_DTE_RX 0x00BC 0x0348 0x0644 0x0 0x6 -#define MX6ULL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x00C0 0x034C 0x0644 0x0 0x7 -#define MX6ULL_PAD_ENET1_RX_EN__UART5_DCE_RTS 0x00CC 0x0358 0x0640 0x1 0x5 -#define MX6ULL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS 0x00D0 0x035C 0x0640 0x1 0x6 +#define MX6ULL_PAD_UART1_RX_DATA__UART5_DTE_TX 0x0088 0x0314 0x0000 0x9 0x0 +#define MX6ULL_PAD_UART1_CTS_B__UART5_DCE_CTS 0x008C 0x0318 0x0000 0x9 0x0 +#define MX6ULL_PAD_UART1_CTS_B__UART5_DTE_RTS 0x008C 0x0318 0x0640 0x9 0x3 +#define MX6ULL_PAD_UART1_RTS_B__UART5_DCE_RTS 0x0090 0x031C 0x0640 0x9 0x4 +#define MX6ULL_PAD_UART1_RTS_B__UART5_DTE_CTS 0x0090 0x031C 0x0000 0x9 0x0 +#define MX6ULL_PAD_UART4_RX_DATA__EPDC_PWRCTRL01 0x00B8 0x0344 0x0000 0x9 0x0 +#define MX6ULL_PAD_UART5_TX_DATA__EPDC_PWRCTRL02 0x00BC 0x0348 0x0000 0x9 0x0 +#define MX6ULL_PAD_UART5_RX_DATA__EPDC_PWRCTRL03 0x00C0 0x034C 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET1_RX_DATA0__EPDC_SDCE04 0x00C4 0x0350 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET1_RX_DATA1__EPDC_SDCE05 0x00C8 0x0354 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET1_RX_EN__EPDC_SDCE06 0x00CC 0x0358 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET1_TX_DATA0__EPDC_SDCE07 0x00D0 0x035C 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET1_TX_DATA1__EPDC_SDCE08 0x00D4 0x0360 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET1_TX_EN__EPDC_SDCE09 0x00D8 0x0364 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET1_TX_CLK__EPDC_SDOED 0x00DC 0x0368 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET1_RX_ER__EPDC_SDOEZ 0x00E0 0x036C 0x0000 0x9 0x0 #define MX6ULL_PAD_ENET2_RX_DATA0__EPDC_SDDO08 0x00E4 0x0370 0x0000 0x9 0x0 #define MX6ULL_PAD_ENET2_RX_DATA1__EPDC_SDDO09 0x00E8 0x0374 0x0000 0x9 0x0 #define MX6ULL_PAD_ENET2_RX_EN__EPDC_SDDO10 0x00EC 0x0378 0x0000 0x9 0x0 @@ -48,6 +72,8 @@ #define MX6ULL_PAD_LCD_DATA16__EPDC_GDCLK 0x0158 0x03E4 0x0000 0x9 0x0 #define MX6ULL_PAD_LCD_DATA17__EPDC_GDSP 0x015C 0x03E8 0x0000 0x9 0x0 #define MX6ULL_PAD_LCD_DATA21__EPDC_SDCE1 0x016C 0x03F8 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA22__EPDC_SDCE02 0x0170 0x03FC 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA23__EPDC_SDCE03 0x0174 0x0400 0x0000 0x9 0x0 #define MX6ULL_PAD_CSI_MCLK__ESAI_TX3_RX2 0x01D4 0x0460 0x0000 0x9 0x0 #define MX6ULL_PAD_CSI_PIXCLK__ESAI_TX2_RX3 0x01D8 0x0464 0x0000 0x9 0x0 #define MX6ULL_PAD_CSI_VSYNC__ESAI_TX4_RX1 0x01DC 0x0468 0x0000 0x9 0x0 @@ -55,7 +81,6 @@ #define MX6ULL_PAD_CSI_DATA00__ESAI_TX_HF_CLK 0x01E4 0x0470 0x0000 0x9 0x0 #define MX6ULL_PAD_CSI_DATA01__ESAI_RX_HF_CLK 0x01E8 0x0474 0x0000 0x9 0x0 #define MX6ULL_PAD_CSI_DATA02__ESAI_RX_FS 0x01EC 0x0478 0x0000 0x9 0x0 -#define MX6ULL_PAD_CSI_DATA02__UART5_DCE_RTS 0x01EC 0x0478 0x0640 0x8 0x7 #define MX6ULL_PAD_CSI_DATA03__ESAI_RX_CLK 0x01F0 0x047C 0x0000 0x9 0x0 #define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS 0x01F4 0x0480 0x0000 0x9 0x0 #define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK 0x01F8 0x0484 0x0000 0x9 0x0 diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi @@ -22,7 +22,7 @@ >; fsl,soc-operating-points = < /* KHz uV */ - 900000 1175000 + 900000 1250000 792000 1175000 528000 1175000 396000 1175000 diff --git a/arch/arm/boot/dts/imx6ulz-14x14-evk.dts b/arch/arm/boot/dts/imx6ulz-14x14-evk.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright 2018 NXP. + +/dts-v1/; + +#include "imx6ulz.dtsi" +#include "imx6ul-14x14-evk.dtsi" + +/delete-node/ &fec1; +/delete-node/ &fec2; +/delete-node/ &lcdif; +/delete-node/ &tsc; + +/ { + model = "Freescale i.MX6 ULZ 14x14 EVK Board"; + compatible = "fsl,imx6ulz-14x14-evk", "fsl,imx6ull", "fsl,imx6ulz"; + + /delete-node/ panel; +}; diff --git a/arch/arm/boot/dts/imx6ulz.dtsi b/arch/arm/boot/dts/imx6ulz.dtsi @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright 2018 NXP. + +#include "imx6ull.dtsi" + +/ { + aliases { + /delete-property/ ethernet0; + /delete-property/ ethernet1; + /delete-property/ i2c2; + /delete-property/ i2c3; + /delete-property/ serial4; + /delete-property/ serial5; + /delete-property/ serial6; + /delete-property/ serial7; + /delete-property/ spi2; + /delete-property/ spi3; + }; +}; + +/delete-node/ &adc1; +/delete-node/ &can1; +/delete-node/ &can2; +/delete-node/ &ecspi3; +/delete-node/ &ecspi4; +/delete-node/ &epit2; +/delete-node/ &gpt2; +/delete-node/ &i2c3; +/delete-node/ &i2c4; +/delete-node/ &pwm5; +/delete-node/ &pwm6; +/delete-node/ &pwm7; +/delete-node/ &pwm8; +/delete-node/ &uart5; +/delete-node/ &uart6; +/delete-node/ &uart7; +/delete-node/ &uart8; diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts @@ -27,12 +27,14 @@ label = "Volume Up"; gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; + wakeup-source; }; volume-down { label = "Volume Down"; gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi @@ -20,6 +20,7 @@ reg = <1>; clock-frequency = <996000000>; operating-points-v2 = <&cpu0_opp_table>; + cpu-idle-states = <&cpu_sleep_wait>; }; }; @@ -63,9 +64,11 @@ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; - port { - etm1_out_port: endpoint { - remote-endpoint = <&ca_funnel_in_port1>; + out-ports { + port { + etm1_out_port: endpoint { + remote-endpoint = <&ca_funnel_in_port1>; + }; }; }; }; @@ -153,11 +156,13 @@ }; }; -&ca_funnel_ports { +&ca_funnel_in_ports { + #address-cells = <1>; + #size-cells = <0>; + port@1 { reg = <1>; ca_funnel_in_port1: endpoint { - slave-mode; remote-endpoint = <&etm1_out_port>; }; }; diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts @@ -1,44 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2016 NXP Semiconductors. * Author: Fabio Estevam <fabio.estevam@nxp.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -216,6 +179,13 @@ status = "okay"; }; +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + &i2c4 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -346,6 +316,13 @@ >; }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f + MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f + >; + }; + pinctrl_i2c4: i2c4grp { fsl,pins = < MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi @@ -54,6 +54,19 @@ #address-cells = <1>; #size-cells = <0>; + idle-states { + entry-method = "psci"; + + cpu_sleep_wait: cpu-sleep-wait { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <100>; + exit-latency-us = <50>; + min-residency-us = <1000>; + }; + }; + cpu0: cpu@0 { compatible = "arm,cortex-a7"; device_type = "cpu"; @@ -61,6 +74,7 @@ clock-frequency = <792000000>; clock-latency = <61036>; /* two CLK32 periods */ clocks = <&clks IMX7D_CLK_ARM>; + cpu-idle-states = <&cpu_sleep_wait>; }; }; @@ -106,7 +120,7 @@ */ compatible = "arm,coresight-replicator"; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; /* replicator output ports */ @@ -123,12 +137,11 @@ remote-endpoint = <&etr_in_port>; }; }; + }; - /* replicator input port */ - port@2 { - reg = <0>; + in-ports { + port { replicator_in_port0: endpoint { - slave-mode; remote-endpoint = <&etf_out_port>; }; }; @@ -168,28 +181,23 @@ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; - ca_funnel_ports: ports { - #address-cells = <1>; - #size-cells = <0>; - - /* funnel input ports */ - port@0 { - reg = <0>; + ca_funnel_in_ports: in-ports { + port { ca_funnel_in_port0: endpoint { - slave-mode; remote-endpoint = <&etm0_out_port>; }; }; - /* funnel output port */ - port@2 { - reg = <0>; + /* the other input ports are not connect to anything */ + }; + + out-ports { + port { ca_funnel_out_port0: endpoint { remote-endpoint = <&hugo_funnel_in_port0>; }; }; - /* the other input ports are not connect to anything */ }; }; @@ -200,9 +208,11 @@ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; - port { - etm0_out_port: endpoint { - remote-endpoint = <&ca_funnel_in_port0>; + out-ports { + port { + etm0_out_port: endpoint { + remote-endpoint = <&ca_funnel_in_port0>; + }; }; }; }; @@ -213,15 +223,13 @@ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; - ports { + in-ports { #address-cells = <1>; #size-cells = <0>; - /* funnel input ports */ port@0 { reg = <0>; hugo_funnel_in_port0: endpoint { - slave-mode; remote-endpoint = <&ca_funnel_out_port0>; }; }; @@ -229,18 +237,18 @@ port@1 { reg = <1>; hugo_funnel_in_port1: endpoint { - slave-mode; /* M4 input */ + /* M4 input */ }; }; + /* the other input ports are not connect to anything */ + }; - port@2 { - reg = <0>; + out-ports { + port { hugo_funnel_out_port0: endpoint { remote-endpoint = <&etf_in_port>; }; }; - - /* the other input ports are not connect to anything */ }; }; @@ -250,20 +258,16 @@ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + in-ports { + port { etf_in_port: endpoint { - slave-mode; remote-endpoint = <&hugo_funnel_out_port0>; }; }; + }; - port@1 { - reg = <0>; + out-ports { + port { etf_out_port: endpoint { remote-endpoint = <&replicator_in_port0>; }; @@ -277,10 +281,11 @@ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; - port { - etr_in_port: endpoint { - slave-mode; - remote-endpoint = <&replicator_out_port1>; + in-ports { + port { + etr_in_port: endpoint { + remote-endpoint = <&replicator_out_port1>; + }; }; }; }; @@ -291,10 +296,11 @@ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; - port { - tpiu_in_port: endpoint { - slave-mode; - remote-endpoint = <&replicator_out_port0>; + in-ports { + port { + tpiu_in_port: endpoint { + remote-endpoint = <&replicator_out_port0>; + }; }; }; }; @@ -563,14 +569,6 @@ clock-names = "snvs-rtc"; }; - snvs_poweroff: snvs-poweroff { - compatible = "syscon-poweroff"; - regmap = <&snvs>; - offset = <0x38>; - value = <0x60>; - mask = <0x60>; - }; - snvs_pwrkey: snvs-powerkey { compatible = "fsl,sec-v4.0-pwrkey"; regmap = <&snvs>; @@ -644,7 +642,7 @@ status = "disabled"; }; - ecspi4: ecspi@30630000 { + ecspi4: spi@30630000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; @@ -725,7 +723,7 @@ reg = <0x30800000 0x100000>; ranges; - ecspi1: ecspi@30820000 { + ecspi1: spi@30820000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; @@ -737,7 +735,7 @@ status = "disabled"; }; - ecspi2: ecspi@30830000 { + ecspi2: spi@30830000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; @@ -749,7 +747,7 @@ status = "disabled"; }; - ecspi3: ecspi@30840000 { + ecspi3: spi@30840000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; @@ -974,6 +972,25 @@ status = "disabled"; }; + mu0a: mailbox@30aa0000 { + compatible = "fsl,imx7s-mu", "fsl,imx6sx-mu"; + reg = <0x30aa0000 0x10000>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_MU_ROOT_CLK>; + #mbox-cells = <2>; + status = "disabled"; + }; + + mu0b: mailbox@30ab0000 { + compatible = "fsl,imx7s-mu", "fsl,imx6sx-mu"; + reg = <0x30ab0000 0x10000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_MU_ROOT_CLK>; + #mbox-cells = <2>; + fsl,mu-side-b; + status = "disabled"; + }; + usbotg1: usb@30b10000 { compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; reg = <0x30b10000 0x200>; diff --git a/arch/arm/boot/dts/imx7ulp-pinfunc.h b/arch/arm/boot/dts/imx7ulp-pinfunc.h @@ -116,6 +116,7 @@ #define IMX7ULP_PAD_PTC13__LPI2C7_SDA 0x0034 0x030c 0x5 0x1 #define IMX7ULP_PAD_PTC13__TPM7_CLKIN 0x0034 0x02f4 0x6 0x1 #define IMX7ULP_PAD_PTC13__FB_AD13 0x0034 0x0000 0x9 0x0 +#define IMX7ULP_PAD_PTC13__USB0_ID 0x0034 0x0338 0xb 0x1 #define IMX7ULP_PAD_PTC14__PTC14 0x0038 0x0000 0x1 0x0 #define IMX7ULP_PAD_PTC14__TRACE_D1 0x0038 0x0000 0xa 0x0 #define IMX7ULP_PAD_PTC14__FXIO1_D10 0x0038 0x022c 0x2 0x1 @@ -136,6 +137,7 @@ #define IMX7ULP_PAD_PTC16__LPSPI3_SIN 0x0040 0x0324 0x3 0x1 #define IMX7ULP_PAD_PTC16__TPM7_CH2 0x0040 0x02e4 0x6 0x1 #define IMX7ULP_PAD_PTC16__FB_ALE_FB_CS1_B_FB_TS_B 0x0040 0x0000 0x9 0x0 +#define IMX7ULP_PAD_PTC16__USB1_OC2 0x0040 0x0334 0xb 0x1 #define IMX7ULP_PAD_PTC17__PTC17 0x0044 0x0000 0x1 0x0 #define IMX7ULP_PAD_PTC17__FXIO1_D13 0x0044 0x0238 0x2 0x1 #define IMX7ULP_PAD_PTC17__LPSPI3_SOUT 0x0044 0x0328 0x3 0x1 @@ -146,11 +148,16 @@ #define IMX7ULP_PAD_PTC18__LPSPI3_SCK 0x0048 0x0320 0x3 0x1 #define IMX7ULP_PAD_PTC18__TPM6_CH0 0x0048 0x02d0 0x6 0x1 #define IMX7ULP_PAD_PTC18__FB_OE_B 0x0048 0x0000 0x9 0x0 +#define IMX7ULP_PAD_PTC18__USB0_ID 0x0048 0x0338 0xb 0x2 +#define IMX7ULP_PAD_PTC18__VIU_DE 0x0048 0x033c 0xc 0x1 #define IMX7ULP_PAD_PTC19__PTC19 0x004c 0x0000 0x1 0x0 #define IMX7ULP_PAD_PTC19__FXIO1_D15 0x004c 0x0240 0x2 0x1 #define IMX7ULP_PAD_PTC19__LPSPI3_PCS0 0x004c 0x0310 0x3 0x1 #define IMX7ULP_PAD_PTC19__TPM6_CH1 0x004c 0x02d4 0x6 0x1 #define IMX7ULP_PAD_PTC19__FB_A16 0x004c 0x0000 0x9 0x0 +#define IMX7ULP_PAD_PTC19__USB0_ID 0x004c 0x0338 0xa 0x3 +#define IMX7ULP_PAD_PTC19__USB1_PWR2 0x004c 0x0000 0xb 0x0 +#define IMX7ULP_PAD_PTC19__VIU_DE 0x004c 0x033c 0xc 0x3 #define IMX7ULP_PAD_PTD0__PTD0 0x0080 0x0000 0x1 0x0 #define IMX7ULP_PAD_PTD0__SDHC0_RESET_B 0x0080 0x0000 0x8 0x0 #define IMX7ULP_PAD_PTD1__PTD1 0x0084 0x0000 0x1 0x0 @@ -218,6 +225,7 @@ #define IMX7ULP_PAD_PTE5__LPI2C5_SDA 0x0114 0x02c0 0x5 0x2 #define IMX7ULP_PAD_PTE5__TPM5_CH0 0x0114 0x02c4 0x6 0x2 #define IMX7ULP_PAD_PTE5__SDHC1_D2 0x0114 0x0000 0x8 0x0 +#define IMX7ULP_PAD_PTE5__VIU_DE 0x0114 0x033c 0xc 0x2 #define IMX7ULP_PAD_PTE6__PTE6 0x0118 0x0000 0x1 0x0 #define IMX7ULP_PAD_PTE6__FXIO1_D25 0x0118 0x0000 0x2 0x0 #define IMX7ULP_PAD_PTE6__LPSPI2_SCK 0x0118 0x02ac 0x3 0x2 @@ -226,8 +234,10 @@ #define IMX7ULP_PAD_PTE6__TPM7_CH3 0x0118 0x02e8 0x6 0x2 #define IMX7ULP_PAD_PTE6__SDHC1_D4 0x0118 0x0000 0x8 0x0 #define IMX7ULP_PAD_PTE6__FB_A17 0x0118 0x0000 0x9 0x0 +#define IMX7ULP_PAD_PTE6__USB0_OC 0x0118 0x0330 0xb 0x1 #define IMX7ULP_PAD_PTE7__PTE7 0x011c 0x0000 0x1 0x0 #define IMX7ULP_PAD_PTE7__TRACE_D7 0x011c 0x0000 0xa 0x0 +#define IMX7ULP_PAD_PTE7__USB0_PWR 0x011c 0x0000 0xb 0x0 #define IMX7ULP_PAD_PTE7__VIU_FID 0x011c 0x0000 0xc 0x0 #define IMX7ULP_PAD_PTE7__FXIO1_D24 0x011c 0x0000 0x2 0x0 #define IMX7ULP_PAD_PTE7__LPSPI2_PCS0 0x011c 0x029c 0x3 0x2 @@ -278,6 +288,7 @@ #define IMX7ULP_PAD_PTE11__FB_A20 0x012c 0x0000 0x9 0x0 #define IMX7ULP_PAD_PTE12__PTE12 0x0130 0x0000 0x1 0x0 #define IMX7ULP_PAD_PTE12__TRACE_D2 0x0130 0x0000 0xa 0x0 +#define IMX7ULP_PAD_PTE12__USB1_OC2 0x0130 0x0334 0xb 0x2 #define IMX7ULP_PAD_PTE12__VIU_D20 0x0130 0x0000 0xc 0x0 #define IMX7ULP_PAD_PTE12__FXIO1_D19 0x0130 0x0000 0x2 0x0 #define IMX7ULP_PAD_PTE12__LPSPI3_SIN 0x0130 0x0324 0x3 0x2 @@ -288,6 +299,7 @@ #define IMX7ULP_PAD_PTE12__FB_A21 0x0130 0x0000 0x9 0x0 #define IMX7ULP_PAD_PTE13__PTE13 0x0134 0x0000 0x1 0x0 #define IMX7ULP_PAD_PTE13__TRACE_D1 0x0134 0x0000 0xa 0x0 +#define IMX7ULP_PAD_PTE13__USB1_PWR2 0x0134 0x0000 0xb 0x0 #define IMX7ULP_PAD_PTE13__VIU_D21 0x0134 0x0000 0xc 0x0 #define IMX7ULP_PAD_PTE13__FXIO1_D18 0x0134 0x0000 0x2 0x0 #define IMX7ULP_PAD_PTE13__LPSPI3_SOUT 0x0134 0x0328 0x3 0x2 @@ -298,6 +310,7 @@ #define IMX7ULP_PAD_PTE13__FB_A22 0x0134 0x0000 0x9 0x0 #define IMX7ULP_PAD_PTE14__PTE14 0x0138 0x0000 0x1 0x0 #define IMX7ULP_PAD_PTE14__TRACE_D0 0x0138 0x0000 0xa 0x0 +#define IMX7ULP_PAD_PTE14__USB0_OC 0x0138 0x0330 0xb 0x2 #define IMX7ULP_PAD_PTE14__VIU_D22 0x0138 0x0000 0xc 0x0 #define IMX7ULP_PAD_PTE14__FXIO1_D17 0x0138 0x0000 0x2 0x0 #define IMX7ULP_PAD_PTE14__LPSPI3_SCK 0x0138 0x0320 0x3 0x2 @@ -308,6 +321,7 @@ #define IMX7ULP_PAD_PTE14__FB_A23 0x0138 0x0000 0x9 0x0 #define IMX7ULP_PAD_PTE15__PTE15 0x013c 0x0000 0x1 0x0 #define IMX7ULP_PAD_PTE15__TRACE_CLKOUT 0x013c 0x0000 0xa 0x0 +#define IMX7ULP_PAD_PTE15__USB0_PWR 0x013c 0x0000 0xb 0x0 #define IMX7ULP_PAD_PTE15__VIU_D23 0x013c 0x0000 0xc 0x0 #define IMX7ULP_PAD_PTE15__FXIO1_D16 0x013c 0x0000 0x2 0x0 #define IMX7ULP_PAD_PTE15__LPSPI3_PCS0 0x013c 0x0310 0x3 0x2 @@ -315,7 +329,7 @@ #define IMX7ULP_PAD_PTE15__TPM6_CH1 0x013c 0x02d4 0x6 0x2 #define IMX7ULP_PAD_PTE15__FB_A24 0x013c 0x0000 0x9 0x0 #define IMX7ULP_PAD_PTF0__PTF0 0x0180 0x0000 0x1 0x0 -#define IMX7ULP_PAD_PTF0__VIU_DE 0x0180 0x0000 0xc 0x0 +#define IMX7ULP_PAD_PTF0__VIU_DE 0x0180 0x033c 0xc 0x0 #define IMX7ULP_PAD_PTF0__LPUART4_CTS_B 0x0180 0x0244 0x4 0x3 #define IMX7ULP_PAD_PTF0__LPI2C4_SCL 0x0180 0x0278 0x5 0x3 #define IMX7ULP_PAD_PTF0__TPM4_CLKIN 0x0180 0x0298 0x6 0x3 diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi @@ -160,10 +160,6 @@ clock-frequency = <100000000>; }; -&pciec { - status = "okay"; -}; - &pfc { can0_pins: can0 { groups = "can0_data_d"; diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi @@ -416,7 +416,7 @@ clock-names = "fck", "mmchsdb_fck"; }; - qspi: qspi@2940000 { + qspi: spi@2940000 { compatible = "ti,k2g-qspi", "cdns,qspi-nor"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi @@ -179,7 +179,7 @@ * ssp0 and spi1 are shared pins; * enable one in your board dts, as needed. */ - ssp0: ssp@20084000 { + ssp0: spi@20084000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x20084000 0x1000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; @@ -199,7 +199,7 @@ * ssp1 and spi2 are shared pins; * enable one in your board dts, as needed. */ - ssp1: ssp@2008c000 { + ssp1: spi@2008c000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x2008c000 0x1000>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts @@ -1,5 +1,6 @@ /* * Copyright 2013-2014 Freescale Semiconductor, Inc. + * Copyright 2018 NXP * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -235,6 +236,7 @@ #size-cells = <1>; compatible = "cfi-flash"; reg = <0x0 0x0 0x8000000>; + big-endian; bank-width = <2>; device-width = <1>; }; diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts @@ -1,5 +1,6 @@ /* * Copyright 2013-2014 Freescale Semiconductor, Inc. + * Copyright 2018 NXP * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -203,6 +204,7 @@ #size-cells = <1>; compatible = "cfi-flash"; reg = <0x0 0x0 0x8000000>; + big-endian; bank-width = <2>; device-width = <1>; }; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi @@ -163,7 +163,7 @@ big-endian; }; - qspi: quadspi@1550000 { + qspi: spi@1550000 { compatible = "fsl,ls1021a-qspi"; #address-cells = <1>; #size-cells = <0>; @@ -330,7 +330,7 @@ }; }; - dspi0: dspi@2100000 { + dspi0: spi@2100000 { compatible = "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; #size-cells = <0>; @@ -343,7 +343,7 @@ status = "disabled"; }; - dspi1: dspi@2110000 { + dspi1: spi@2110000 { compatible = "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; #size-cells = <0>; @@ -364,6 +364,8 @@ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; clocks = <&clockgen 4 1>; + dma-names = "tx", "rx"; + dmas = <&edma0 1 39>, <&edma0 1 38>; status = "disabled"; }; @@ -375,6 +377,8 @@ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; clocks = <&clockgen 4 1>; + dma-names = "tx", "rx"; + dmas = <&edma0 1 37>, <&edma0 1 36>; status = "disabled"; }; @@ -386,6 +390,8 @@ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; clocks = <&clockgen 4 1>; + dma-names = "tx", "rx"; + dmas = <&edma0 1 35>, <&edma0 1 34>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi @@ -194,7 +194,7 @@ #clock-cells = <1>; #reset-cells = <1>; compatible = "amlogic,meson8-clkc"; - reg = <0x8000 0x4>, <0x4000 0x460>; + reg = <0x8000 0x4>, <0x4000 0x400>; }; reset: reset-controller@4404 { diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts @@ -0,0 +1,248 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +#include "meson8b.dtsi" + +/ { + model = "Endless Computers Endless Mini"; + compatible = "endless,ec100", "amlogic,meson8b"; + + aliases { + serial0 = &uart_AO; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x40000000 0x40000000>; + }; + + gpio-keys { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + pal-switch { + label = "pal"; + linux,input-type = <EV_SW>; + linux,code = <KEY_SWITCHVIDEOMODE>; + gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>; + }; + + ntsc-switch { + label = "ntsc"; + linux,input-type = <EV_SW>; + linux,code = <KEY_SWITCHVIDEOMODE>; + gpios = <&gpio GPIOH_8 GPIO_ACTIVE_HIGH>; + }; + + power-button { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&gpio GPIOH_9 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + /* + * shutdown is managed by the EC (embedded micro-controller) + * which is configured through GPIOAO_2 (poweroff GPIO) and + * GPIOAO_7 (power LED, which has to go LOW as well). + */ + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + timeout-ms = <20000>; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "ec100:red:power"; + /* + * Needs to go LOW (together with the poweroff GPIO) + * during shutdown to allow the EC (embedded + * micro-controller) to shutdown the system. Setting + * the output to LOW signals the EC to start a + * "breathing"/pulsing effect until the power is fully + * turned off. + */ + gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vcc_5v: regulator-vcc5v { + compatible = "regulator-fixed"; + + regulator-name = "VCC5V"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio GPIODV_29 GPIO_ACTIVE_LOW>; + + regulator-boot-on; + regulator-always-on; + }; + + vcck: regulator-vcck { + compatible = "pwm-regulator"; + + regulator-name = "VCCK"; + regulator-min-microvolt = <860000>; + regulator-max-microvolt = <1140000>; + + pwms = <&pwm_cd 0 1148 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vcc_1v8: regulator-vcc1v8 { + compatible = "regulator-fixed"; + + regulator-name = "VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcc_3v3: regulator-vcc3v3 { + compatible = "regulator-fixed"; + + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&cpu0 { + cpu-supply = <&vcck>; +}; + +&ethmac { + status = "okay"; + + pinctrl-0 = <&eth_rmii_pins>; + pinctrl-names = "default"; + + phy-handle = <&eth_phy0>; + phy-mode = "rmii"; + + snps,reset-gpio = <&gpio GPIOH_4 0>; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-active-low; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + /* IC Plus IP101A/G (0x02430c54) */ + reg = <0>; + }; + }; +}; + +&i2c_A { + status = "okay"; + pinctrl-0 = <&i2c_a_pins>; + pinctrl-names = "default"; + + rt5640: codec@1c { + compatible = "realtek,rt5640"; + reg = <0x1c>; + interrupt-parent = <&gpio_intc>; + interrupts = <13 IRQ_TYPE_EDGE_BOTH>; /* GPIOAO_13 */ + realtek,in1-differential; + }; +}; + +&saradc { + status = "okay"; + vref-supply = <&vcc_1v8>; +}; + +&sdio { + status = "okay"; + + pinctrl-0 = <&sd_b_pins>; + pinctrl-names = "default"; + + /* SD card */ + sd_card_slot: slot@1 { + compatible = "mmc-slot"; + reg = <1>; + status = "okay"; + + bus-width = <4>; + no-sdio; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; + + vmmc-supply = <&vcc_3v3>; + }; +}; + +&pwm_cd { + status = "okay"; + pinctrl-0 = <&pwm_c1_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_XTAL>; + clock-names = "clkin0"; +}; + +/* exposed through the pin headers labeled "URDUG1" on the top of the PCB */ +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +/* + * connected to the Bluetooth part of the RTL8723BS SDIO wifi / Bluetooth + * combo chip. This is only available on the variant with 2GB RAM. + */ +&uart_B { + status = "okay"; + pinctrl-0 = <&uart_b0_pins>, <&uart_b0_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; +}; + +&usb1 { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; + +&usb1_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -57,6 +57,10 @@ mmc0 = &sd_card_slot; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x40000000 0x40000000>; }; @@ -71,6 +75,14 @@ }; }; + p5v0: regulator-p5v0 { + compatible = "regulator-fixed"; + + regulator-name = "P5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + tflash_vdd: regulator-tflash_vdd { /* * signal name from schematics: TFLASH_VDD_EN @@ -81,6 +93,8 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3>; + gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -92,6 +106,8 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3>; + /* * signal name from schematics: TF_3V3N_1V8_EN */ @@ -101,6 +117,86 @@ states = <3300000 0 1800000 1>; }; + + vcc_1v8: regulator-vcc-1v8 { + /* + * RICHTEK RT9179 configured for a fixed output voltage of + * 1.8V. This supplies not only VCC1V8 but also IOREF_1V8 and + * VDD1V8 according to the schematics. + */ + compatible = "regulator-fixed"; + + regulator-name = "VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + vin-supply = <&p5v0>; + }; + + vcc_3v3: regulator-vcc-3v3 { + /* + * Monolithic Power Systems MP2161 configured for a fixed + * output voltage of 3.3V. This supplies not only VCC3V3 but + * also VDD3V3 and VDDIO_AO3V3 according to the schematics. + */ + compatible = "regulator-fixed"; + + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + vin-supply = <&p5v0>; + }; + + vcck: regulator-vcck { + /* Monolithic Power Systems MP2161 */ + compatible = "pwm-regulator"; + + regulator-name = "VCCK"; + regulator-min-microvolt = <860000>; + regulator-max-microvolt = <1140000>; + + vin-supply = <&p5v0>; + + pwms = <&pwm_cd 0 12218 0>; + pwm-dutycycle-range = <91 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vddc_ddr: regulator-vddc-ddr { + /* + * Monolithic Power Systems MP2161 configured for a fixed + * output voltage of 1.5V. This supplies not only DDR_VDDC but + * also DDR3_1V5 according to the schematics. + */ + compatible = "regulator-fixed"; + + regulator-name = "DDR_VDDC"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + + vin-supply = <&p5v0>; + }; + + vdd_rtc: regulator-vdd-rtc { + /* + * Torex Semiconductor XC6215 configured for a fixed output of + * 0.9V. + */ + compatible = "regulator-fixed"; + + regulator-name = "VDD_RTC"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + vin-supply = <&vcc_3v3>; + }; +}; + +&cpu0 { + cpu-supply = <&vcck>; }; &ethmac { @@ -154,6 +250,11 @@ pinctrl-names = "default"; }; +&saradc { + status = "okay"; + vref-supply = <&vcc_1v8>; +}; + &sdio { status = "okay"; @@ -180,6 +281,14 @@ }; }; +&pwm_cd { + status = "okay"; + pinctrl-0 = <&pwm_c1_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_XTAL>; + clock-names = "clkin0"; +}; + &uart_AO { status = "okay"; pinctrl-0 = <&uart_ao_a_pins>; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi @@ -163,7 +163,7 @@ #clock-cells = <1>; #reset-cells = <1>; compatible = "amlogic,meson8b-clkc"; - reg = <0x8000 0x4>, <0x4000 0x460>; + reg = <0x8000 0x4>, <0x4000 0x400>; }; reset: reset-controller@4404 { @@ -223,6 +223,28 @@ }; }; + eth_rmii_pins: eth-rmii { + mux { + groups = "eth_tx_en", + "eth_txd1_0", + "eth_txd0_0", + "eth_rx_clk", + "eth_rx_dv", + "eth_rxd1", + "eth_rxd0", + "eth_mdio_en", + "eth_mdc"; + function = "ethernet"; + }; + }; + + i2c_a_pins: i2c-a { + mux { + groups = "i2c_sda_a", "i2c_sck_a"; + function = "i2c_a"; + }; + }; + sd_b_pins: sd-b { mux { groups = "sd_d0_b", "sd_d1_b", "sd_d2_b", @@ -230,6 +252,29 @@ function = "sd_b"; }; }; + + pwm_c1_pins: pwm-c1 { + mux { + groups = "pwm_c1"; + function = "pwm_c"; + }; + }; + + uart_b0_pins: uart-b0 { + mux { + groups = "uart_tx_b0", + "uart_rx_b0"; + function = "uart_b"; + }; + }; + + uart_b0_cts_rts_pins: uart-b0-cts-rts { + mux { + groups = "uart_cts_b0", + "uart_rts_b0"; + function = "uart_b"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi @@ -13,6 +13,7 @@ #include <dt-bindings/power/mt2701-power.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/phy/phy.h> +#include <dt-bindings/memory/mt2701-larb-port.h> #include <dt-bindings/reset/mt2701-resets.h> #include <dt-bindings/thermal/thermal.h> @@ -121,6 +122,15 @@ }; }; + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + system_clk: dummy13m { compatible = "fixed-clock"; clock-frequency = <13000000>; @@ -277,6 +287,17 @@ clock-names = "system-clk", "rtc-clk"; }; + smi_common: smi@1000c000 { + compatible = "mediatek,mt7623-smi-common", + "mediatek,mt2701-smi-common"; + reg = <0 0x1000c000 0 0x1000>; + clocks = <&infracfg CLK_INFRA_SMI>, + <&mmsys CLK_MM_SMI_COMMON>, + <&infracfg CLK_INFRA_SMI>; + clock-names = "apb", "smi", "async"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>; + }; + pwrap: pwrap@1000d000 { compatible = "mediatek,mt7623-pwrap", "mediatek,mt2701-pwrap"; @@ -308,6 +329,17 @@ reg = <0 0x10200100 0 0x1c>; }; + iommu: mmsys_iommu@10205000 { + compatible = "mediatek,mt7623-m4u", + "mediatek,mt2701-m4u"; + reg = <0 0x10205000 0 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_M4U>; + clock-names = "bclk"; + mediatek,larbs = <&larb0 &larb1 &larb2>; + #iommu-cells = <1>; + }; + efuse: efuse@10206000 { compatible = "mediatek,mt7623-efuse", "mediatek,mt8173-efuse"; @@ -683,6 +715,90 @@ status = "disabled"; }; + g3dsys: syscon@13000000 { + compatible = "mediatek,mt7623-g3dsys", + "mediatek,mt2701-g3dsys", + "syscon"; + reg = <0 0x13000000 0 0x200>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + mmsys: syscon@14000000 { + compatible = "mediatek,mt7623-mmsys", + "mediatek,mt2701-mmsys", + "syscon"; + reg = <0 0x14000000 0 0x1000>; + #clock-cells = <1>; + }; + + larb0: larb@14010000 { + compatible = "mediatek,mt7623-smi-larb", + "mediatek,mt2701-smi-larb"; + reg = <0 0x14010000 0 0x1000>; + mediatek,smi = <&smi_common>; + mediatek,larb-id = <0>; + clocks = <&mmsys CLK_MM_SMI_LARB0>, + <&mmsys CLK_MM_SMI_LARB0>; + clock-names = "apb", "smi"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>; + }; + + imgsys: syscon@15000000 { + compatible = "mediatek,mt7623-imgsys", + "mediatek,mt2701-imgsys", + "syscon"; + reg = <0 0x15000000 0 0x1000>; + #clock-cells = <1>; + }; + + larb2: larb@15001000 { + compatible = "mediatek,mt7623-smi-larb", + "mediatek,mt2701-smi-larb"; + reg = <0 0x15001000 0 0x1000>; + mediatek,smi = <&smi_common>; + mediatek,larb-id = <2>; + clocks = <&imgsys CLK_IMG_SMI_COMM>, + <&imgsys CLK_IMG_SMI_COMM>; + clock-names = "apb", "smi"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; + }; + + jpegdec: jpegdec@15004000 { + compatible = "mediatek,mt7623-jpgdec", + "mediatek,mt2701-jpgdec"; + reg = <0 0x15004000 0 0x1000>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>; + clocks = <&imgsys CLK_IMG_JPGDEC_SMI>, + <&imgsys CLK_IMG_JPGDEC>; + clock-names = "jpgdec-smi", + "jpgdec"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; + mediatek,larb = <&larb2>; + iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>, + <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>; + }; + + vdecsys: syscon@16000000 { + compatible = "mediatek,mt7623-vdecsys", + "mediatek,mt2701-vdecsys", + "syscon"; + reg = <0 0x16000000 0 0x1000>; + #clock-cells = <1>; + }; + + larb1: larb@16010000 { + compatible = "mediatek,mt7623-smi-larb", + "mediatek,mt2701-smi-larb"; + reg = <0 0x16010000 0 0x1000>; + mediatek,smi = <&smi_common>; + mediatek,larb-id = <1>; + clocks = <&vdecsys CLK_VDEC_CKGEN>, + <&vdecsys CLK_VDEC_LARB>; + clock-names = "apb", "smi"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>; + }; + hifsys: syscon@1a000000 { compatible = "mediatek,mt7623-hifsys", "mediatek,mt2701-hifsys", @@ -937,6 +1053,14 @@ power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; status = "disabled"; }; + + bdpsys: syscon@1c000000 { + compatible = "mediatek,mt7623-bdpsys", + "mediatek,mt2701-bdpsys", + "syscon"; + reg = <0 0x1c000000 0 0x1000>; + #clock-cells = <1>; + }; }; &pio { diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi @@ -114,7 +114,7 @@ dma-names = "tx", "rx"; }; - mcspi1: mcspi@48098000 { + mcspi1: spi@48098000 { compatible = "ti,omap2-mcspi"; ti,hwmods = "mcspi1"; reg = <0x48098000 0x100>; @@ -125,7 +125,7 @@ "tx2", "rx2", "tx3", "rx3"; }; - mcspi2: mcspi@4809a000 { + mcspi2: spi@4809a000 { compatible = "ti,omap2-mcspi"; ti,hwmods = "mcspi2"; reg = <0x4809a000 0x100>; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi @@ -285,7 +285,7 @@ ti,timer-alwon; }; - mcspi3: mcspi@480b8000 { + mcspi3: spi@480b8000 { compatible = "ti,omap2-mcspi"; ti,hwmods = "mcspi3"; reg = <0x480b8000 0x100>; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -160,10 +160,11 @@ clocks = <&emu_src_ck>; clock-names = "apb_pclk"; - port { - etb_in: endpoint { - slave-mode; - remote-endpoint = <&etm_out>; + in-ports { + port { + etb_in: endpoint { + remote-endpoint = <&etm_out>; + }; }; }; }; @@ -174,9 +175,11 @@ clocks = <&emu_src_ck>; clock-names = "apb_pclk"; - port { - etm_out: endpoint { - remote-endpoint = <&etb_in>; + out-ports { + port { + etm_out: endpoint { + remote-endpoint = <&etb_in>; + }; }; }; }; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts @@ -147,10 +147,11 @@ clocks = <&emu_src_ck>; clock-names = "apb_pclk"; - port { - etb_in: endpoint { - slave-mode; - remote-endpoint = <&etm_out>; + in-ports { + port { + etb_in: endpoint { + remote-endpoint = <&etm_out>; + }; }; }; }; @@ -161,9 +162,11 @@ clocks = <&emu_src_ck>; clock-names = "apb_pclk"; - port { - etm_out: endpoint { - remote-endpoint = <&etb_in>; + out-ports { + port { + etm_out: endpoint { + remote-endpoint = <&etb_in>; + }; }; }; }; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -10,6 +10,7 @@ /dts-v1/; #include "omap36xx.dtsi" +#include <dt-bindings/input/input.h> / { model = "OMAP3 GTA04"; @@ -28,6 +29,7 @@ aliases { display0 = &lcd; + display1 = &tv0; }; /* fixed 26MHz oscillator */ @@ -42,12 +44,27 @@ aux-button { label = "aux"; - linux,code = <169>; + linux,code = <KEY_PHONE>; gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; wakeup-source; }; }; + antenna-detect { + compatible = "gpio-keys"; + + gps_antenna_button: gps-antenna-button { + label = "GPS_EXT_ANT"; + linux,input-type = <EV_SW>; + linux,code = <SW_LINEIN_INSERT>; + gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* GPIO144 */ + interrupt-parent = <&gpio5>; + interrupts = <16 IRQ_TYPE_EDGE_BOTH>; + debounce-interval = <10>; + wakeup-source; + }; + }; + sound { compatible = "ti,omap-twl4030"; ti,model = "gta04"; @@ -55,7 +72,7 @@ ti,mcbsp = <&mcbsp2>; }; - /* GSM audio */ + /* GSM audio */ sound_telephony { compatible = "simple-audio-card"; simple-audio-card,name = "GTA04 voice"; @@ -78,7 +95,7 @@ #sound-dai-cells = <0>; }; - spi_lcd { + spi_lcd: spi_lcd { compatible = "spi-gpio"; #address-cells = <0x1>; #size-cells = <0x0>; @@ -131,7 +148,7 @@ }; tv0: connector { - compatible = "svideo-connector"; + compatible = "composite-video-connector"; label = "tv"; port { @@ -143,7 +160,7 @@ tv_amp: opa362 { compatible = "ti,opa362"; - enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; /* GPIO_23 to enable video out amplifier */ ports { #address-cells = <1>; @@ -169,6 +186,42 @@ compatible = "mmc-pwrseq-simple"; reset-gpios = <&tca6507 0 GPIO_ACTIVE_LOW>; /* W2CBW003 reset through tca6507 */ }; + + /* devconf0 setup for mcbsp1 clock pins */ + pinmux_mcbsp1@48002274 { + compatible = "pinctrl-single"; + reg = <0x48002274 4>; /* CONTROL_DEVCONF0 */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,bit-per-mux; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x7>; /* MCBSP1 CLK pinmux */ + #pinctrl-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp1_devconf0_pins>; + mcbsp1_devconf0_pins: pinmux_mcbsp1_devconf0_pins { + /* offset bits mask */ + pinctrl-single,bits = <0x00 0x08 0x1c>; /* set MCBSP1_CLKR */ + }; + }; + + /* devconf1 setup for tvout pins */ + pinmux_tv_out@480022d8 { + compatible = "pinctrl-single"; + reg = <0x480022d8 4>; /* CONTROL_DEVCONF1 */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,bit-per-mux; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x81>; /* TV out pin control */ + #pinctrl-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&tv_acbias_devconf1_pins>; + tv_acbias_devconf1_pins: pinmux_tv_acbias_devconf1_pins { + /* offset bits mask */ + pinctrl-single,bits = <0x00 0x40800 0x40800>; /* set TVOUTBYPASS and TVOUTACEN */ + }; + }; }; &omap3_pmx_core { @@ -220,14 +273,14 @@ >; }; - backlight_pins: backlight_pins_pimnux { + backlight_pins: backlight_pins_pinmux { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20ba, MUX_MODE3) /* gpt11/gpio57 */ >; }; dss_dpi_pins: pinmux_dss_dpi_pins { - pinctrl-single,pins = < + pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ @@ -265,6 +318,12 @@ >; }; + bmp085_pins: pinmux_bmp085_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2136, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio113 */ + >; + }; + bma180_pins: pinmux_bma180_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x213a, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio115 */ @@ -282,6 +341,78 @@ OMAP3_CORE1_IOPAD(0x2134, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio112 */ >; }; + + penirq_pins: pinmux_penirq_pins { + pinctrl-single,pins = < + /* here we could enable to wakeup the cpu from suspend by a pen touch */ + OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio160 */ + >; + }; + + camera_pins: pinmux_camera_pins { + pinctrl-single,pins = < + /* set up parallel camera interface */ + OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_hs */ + OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_vs */ + OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0) /* cam_xclka */ + OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_pclk */ + OMAP3_CORE1_IOPAD(0x2114, PIN_OUTPUT | MUX_MODE4) /* cam_fld = gpio_98 */ + OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d0 */ + OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d1 */ + OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d2 */ + OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d3 */ + OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d4 */ + OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d5 */ + OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d6 */ + OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d7 */ + OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d8 */ + OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d9 */ + OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */ + OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */ + OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE0) /* cam_xclkb */ + OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* cam_wen = gpio_167 */ + OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLDOWN | MUX_MODE4) /* cam_strobe */ + >; + }; + + mcbsp1_pins: pinmux_mcbsp1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT | MUX_MODE4) /* mcbsp1_clkr.mcbsp1_clkr - gpio_156 FM interrupt */ + OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_clkr.mcbsp1_fsr */ + OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dx */ + OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dr */ + /* mcbsp_clks is used as PENIRQ */ + /* OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT | MUX_MODE0) /* mcbsp_clks.mcbsp_clks */ + OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0) /* mcbsp_clks.mcbsp1_fsx */ + OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0) /* mcbsp1_clkx.mcbsp1_clkx */ + >; + }; + + mcbsp2_pins: pinmux_mcbsp2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */ + OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_clkx */ + OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2_dr */ + OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2_dx */ + >; + }; + + mcbsp3_pins: pinmux_mcbsp3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0) /* mcbsp3_dx.mcbsp3_dx */ + OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0) /* mcbsp3_dx.mcbsp3_dr */ + OMAP3_CORE1_IOPAD(0x2170, PIN_INPUT | MUX_MODE0) /* mcbsp3_clkx.mcbsp3_clkx */ + OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE0) /* mcbsp3_clkx.mcbsp3_fsx */ + >; + }; + + mcbsp4_pins: pinmux_mcbsp4_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_clkx.mcbsp4_clkx */ + OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_clkx.mcbsp4_dr */ + OMAP3_CORE1_IOPAD(0x218a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_dx.mcbsp4_fsx */ + >; + }; }; &omap3_pmx_core2 { @@ -347,6 +478,8 @@ bmp085@77 { compatible = "bosch,bmp085"; reg = <0x77>; + pinctrl-names = "default"; + pinctrl-0 = <&bmp085_pins>; interrupt-parent = <&gpio4>; interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */ }; @@ -402,7 +535,7 @@ reg = <0x4>; }; - wifi_reset: wifi_reset@6 { + wifi_reset: wifi_reset@6 { /* reference as <&tca_gpios 0 0> since it is currently the only GPIO */ reg = <0x6>; compatible = "gpio"; }; @@ -422,10 +555,19 @@ tsc2007@48 { compatible = "ti,tsc2007"; reg = <0x48>; + pinctrl-names = "default"; + pinctrl-0 = <&penirq_pins>; interrupt-parent = <&gpio6>; interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */ - gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; + gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* GPIO_160 */ ti,x-plate-ohms = <600>; + touchscreen-size-x = <480>; + touchscreen-size-y = <640>; + touchscreen-max-pressure = <1000>; + touchscreen-fuzz-x = <3>; + touchscreen-fuzz-y = <8>; + touchscreen-fuzz-pressure = <10>; + touchscreen-inverted-y; }; /* RFID EEPROM */ @@ -462,6 +604,7 @@ vmmc-supply = <&vmmc1>; bus-width = <4>; ti,non-removable; + broken-cd; /* hardware has no CD */ }; &mmc2 { @@ -476,6 +619,19 @@ status = "disabled"; }; +#define BIT(x) (1 << (x)) +&twl_gpio { + /* pullups: BIT(2) */ + ti,pullups = <BIT(2)>; + /* + * pulldowns: + * BIT(0), BIT(1), BIT(6), BIT(7), BIT(8), BIT(13) + * BIT(15), BIT(16), BIT(17) + */ + ti,pulldowns = <(BIT(0) | BIT(1) | BIT(6) | BIT(7) | BIT(8) | + BIT(13) | BIT(15) | BIT(16) | BIT(17))>; +}; + &twl_keypad { status = "disabled"; }; @@ -493,6 +649,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; }; &charger { @@ -510,7 +667,7 @@ &vaux2 { regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - regulator-always-on; + regulator-always-on; /* we should never switch off while vio is on! */ }; /* camera */ @@ -531,6 +688,12 @@ regulator-max-microvolt = <3150000>; }; +/* Needed to power the DPI pins */ + +&vpll2 { + regulator-always-on; +}; + &dss { pinctrl-names = "default"; pinctrl-0 = < &dss_dpi_pins >; @@ -551,10 +714,14 @@ vdda-supply = <&vdac>; + #address-cells = <1>; + #size-cells = <0>; + port { + reg = <0>; venc_out: endpoint { remote-endpoint = <&opa_in>; - ti,channels = <2>; + ti,channels = <1>; ti,invert-polarity; }; }; @@ -569,27 +736,27 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ + ti,nand-ecc-opt = "ham1"; + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ nand-bus-width = <16>; - ti,nand-ecc-opt = "bch8"; + #address-cells = <1>; + #size-cells = <1>; - gpmc,sync-clk-ps = <0>; + gpmc,device-width = <2>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <44>; gpmc,cs-wr-off-ns = <44>; gpmc,adv-on-ns = <6>; gpmc,adv-rd-off-ns = <34>; gpmc,adv-wr-off-ns = <44>; - gpmc,we-off-ns = <40>; gpmc,oe-off-ns = <54>; + gpmc,we-off-ns = <40>; gpmc,access-ns = <64>; gpmc,rd-cycle-ns = <82>; gpmc,wr-cycle-ns = <82>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; - gpmc,device-width = <2>; - - #address-cells = <1>; - #size-cells = <1>; + gpmc,sync-clk-ps = <0>; x-loader@0 { label = "X-Loader"; @@ -598,28 +765,51 @@ bootloaders@80000 { label = "U-Boot"; - reg = <0x80000 0x1e0000>; + reg = <0x80000 0x1c0000>; }; - bootloaders_env@260000 { + bootloaders_env@240000 { label = "U-Boot Env"; - reg = <0x260000 0x20000>; + reg = <0x240000 0x40000>; }; kernel@280000 { label = "Kernel"; - reg = <0x280000 0x400000>; + reg = <0x280000 0x600000>; }; - filesystem@680000 { + filesystem@880000 { label = "File System"; - reg = <0x680000 0xf980000>; + reg = <0x880000 0>; /* 0 = MTDPART_SIZ_FULL */ }; }; }; -&mcbsp2 { - status = "okay"; +&mcbsp1 { /* FM Transceiver PCM */ + status = "ok"; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp1_pins>; +}; + +&mcbsp2 { /* TPS65950 I2S */ + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp2_pins>; +}; + +&mcbsp3 { /* Bluetooth PCM */ + status = "ok"; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp3_pins>; +}; + +&mcbsp4 { /* GSM voice PCM */ + status = "ok"; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp4_pins>; }; &hdqw1w { @@ -627,6 +817,22 @@ pinctrl-0 = <&hdq_pins>; }; -&mcbsp4 { - status = "okay"; +/* image signal processor within OMAP3 SoC */ +&isp { + ports { + port@0 { + reg = <0>; + parallel_ep: endpoint { + ti,isp-clock-divisor = <1>; + ti,strobe-mode; + bus-width = <8>;/* Used data lines */ + data-shift = <2>; /* Lines 9:2 are used */ + hsync-active = <0>; /* Active low */ + vsync-active = <1>; /* Active high */ + data-active = <1>;/* Active high */ + pclk-sample = <1>;/* Falling */ + }; + }; + /* port@1 and port@2 are not used by GTA04 */ + }; }; diff --git a/arch/arm/boot/dts/omap3-gta04a3.dts b/arch/arm/boot/dts/omap3-gta04a3.dts @@ -9,7 +9,7 @@ #include "omap3-gta04.dtsi" / { - model = "Goldelico GTA04A3"; + model = "Goldelico GTA04A3/Letux 2804"; }; &i2c2 { diff --git a/arch/arm/boot/dts/omap3-gta04a4.dts b/arch/arm/boot/dts/omap3-gta04a4.dts @@ -9,5 +9,5 @@ #include "omap3-gta04.dtsi" / { - model = "Goldelico GTA04A4"; + model = "Goldelico GTA04A4/Letux 2804"; }; diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/omap3-gta04a5.dts @@ -1,5 +1,5 @@ /* - * Copyright (C) 2014 H. Nikolaus Schaller <hns@goldelico.com> + * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -9,9 +9,132 @@ #include "omap3-gta04.dtsi" / { - model = "Goldelico GTA04A5"; + model = "Goldelico GTA04A5/Letux 2804"; sound { - ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>; /* GTA04A5 only */ + ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>; /* GTA04A5 only */ + }; + + wlan_en: wlan_en_regulator { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_pins>; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* GPIO_138 */ + + startup-delay-us = <70000>; + enable-active-high; + }; + + pps { + compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pps_pins>; + + gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>; /* GPIN_114 */ + }; + +}; + +&gpio5 { + irda_en { + gpio-hog; + gpios = <(175-160) GPIO_ACTIVE_HIGH>; + output-high; /* activate gpio_175 to disable IrDA receiver */ + }; +}; + +&omap3_pmx_core { + bt_pins: pinmux_bt_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* mmc2_dat5 = mmc3_dat1 = gpio137 */ + >; + }; + + wlan_pins: pinmux_wlan_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* mmc2_dat6 = mmc3_dat2 = gpio138 */ + >; + }; + + wlan_irq_pin: pinmux_wlan_irq_pin { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE4) /* mmc2_dat7 = mmc3_dat3 = gpio139 */ + >; + }; + + irda_pins: pinmux_irda { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21d0, PIN_OUTPUT_PULLUP | MUX_MODE4) /* mcspi1_cs1 = gpio175 */ + >; + }; + + pps_pins: pinmux_pps_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT | MUX_MODE4) /* gpin114 */ + >; + }; + +}; + +/* + * for WL183x module see + * http://lxr.free-electrons.com/source/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt + */ + +&wifi_pwrseq { + /delete-property/ reset-gpios; +}; + +&mmc2 { + vmmc-supply = <&wlan_en>; + bus-width = <4>; + cap-power-off-card; + non-removable; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_irq_pin>; + + #address-cells = <1>; + #size-cells = <0>; + + /delete-property/ mmc-pwrseq; + + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; + interrupt-parent = <&gpio5>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_139 */ + ref-clock-frequency = <26000000>; + }; +}; + +&i2c2 { + /delete-node/ bmp085@77; + /delete-node/ bma180@41; + /delete-node/ itg3200@68; + /delete-node/ hmc5843@1e; + + bmg160@69 { + compatible = "bosch,bmg160"; + reg = <0x69>; + }; + + bmc150@10 { + compatible = "bosch,bmc150_accel"; + reg = <0x10>; + }; + + bmc150@12 { + compatible = "bosch,bmc150_magn"; + reg = <0x12>; + }; + + bme280@76 { + compatible = "bosch,bme280"; + reg = <0x76>; }; }; diff --git a/arch/arm/boot/dts/omap3-gta04a5one.dts b/arch/arm/boot/dts/omap3-gta04a5one.dts @@ -0,0 +1,114 @@ +/* + * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-gta04a5.dts" + +&omap3_pmx_core { + model = "Goldelico GTA04A5/Letux 2804 with OneNAND"; + + gpmc_pins: pinmux_gpmc_pins { + pinctrl-single,pins = < + + /* address lines */ + OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0) /* gpmc_a1.gpmc_a1 */ + OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0) /* gpmc_a2.gpmc_a2 */ + OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0) /* gpmc_a3.gpmc_a3 */ + + /* data lines, gpmc_d0..d7 not muxable according to TRM */ + OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0) /* gpmc_d8.gpmc_d8 */ + OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0) /* gpmc_d9.gpmc_d9 */ + OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0) /* gpmc_d10.gpmc_d10 */ + OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0) /* gpmc_d11.gpmc_d11 */ + OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0) /* gpmc_d12.gpmc_d12 */ + OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0) /* gpmc_d13.gpmc_d13 */ + OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0) /* gpmc_d14.gpmc_d14 */ + OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0) /* gpmc_d15.gpmc_d15 */ + + /* + * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable + * according to TRM. OneNAND seems to require PIN_INPUT on clock. + */ + OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs1.gpmc_ncs1 */ + OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */ + >; + }; +}; + +&gpmc { + /* switch inherited setup to OneNAND */ + + ranges = <0 0 0x04000000 0x1000000>; /* CS0: 16MB for OneNAND */ + pinctrl-names = "default"; + pinctrl-0 = <&gpmc_pins>; + + /delete-node/ nand@0,0; + + onenand@0,0 { + + #address-cells = <1>; + #size-cells = <1>; + compatible = "ti,omap2-onenand"; + reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */ + + gpmc,sync-read; + gpmc,sync-write; + gpmc,burst-length = <16>; + gpmc,burst-read; + gpmc,burst-wrap; + gpmc,burst-write; + gpmc,device-width = <2>; + gpmc,mux-add-data = <2>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <87>; + gpmc,cs-wr-off-ns = <87>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <10>; + gpmc,adv-wr-off-ns = <10>; + gpmc,oe-on-ns = <15>; + gpmc,oe-off-ns = <87>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <87>; + gpmc,rd-cycle-ns = <112>; + gpmc,wr-cycle-ns = <112>; + gpmc,access-ns = <81>; + gpmc,page-burst-access-ns = <15>; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,clk-activation-ns = <5>; + gpmc,wr-data-mux-bus-ns = <30>; + gpmc,wr-access-ns = <81>; + gpmc,sync-clk-ps = <15000>; + + x-loader@0 { + label = "X-Loader"; + reg = <0 0x80000>; + }; + + bootloaders@80000 { + label = "U-Boot"; + reg = <0x80000 0x1c0000>; + }; + + bootloaders_env@240000 { + label = "U-Boot Env"; + reg = <0x240000 0x40000>; + }; + + kernel@280000 { + label = "Kernel"; + reg = <0x280000 0x600000>; + }; + + filesystem@880000 { + label = "File System"; + reg = <0x880000 0>; /* 0 = MTDPART_SIZ_FULL */ + }; + + }; +}; diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts @@ -40,7 +40,7 @@ }; &i2c3 { - ak8975@0f { + ak8975@f { compatible = "asahi-kasei,ak8975"; reg = <0x0f>; }; diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -700,6 +700,10 @@ vbus-supply = <&smps10_out1_reg>; }; +&dwc3 { + dr_mode = "otg"; +}; + &mcspi1 { }; diff --git a/arch/arm/boot/dts/orion5x-linkstation.dtsi b/arch/arm/boot/dts/orion5x-linkstation.dtsi @@ -156,7 +156,7 @@ &i2c { status = "okay"; - rtc { + rtc@32 { compatible = "ricoh,rs5c372a"; reg = <0x32>; }; diff --git a/arch/arm/boot/dts/owl-s500-cubieboard6.dts b/arch/arm/boot/dts/owl-s500-cubieboard6.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Cubietech CubieBoard6 * * Copyright (c) 2017 Andreas Färber - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; diff --git a/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts b/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016-2017 Andreas Färber - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; diff --git a/arch/arm/boot/dts/owl-s500-guitar.dtsi b/arch/arm/boot/dts/owl-s500-guitar.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * LeMaker Guitar SoM * * Copyright (c) 2016-2017 Andreas Färber - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ #include "owl-s500.dtsi" diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/owl-s500.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Actions Semi S500 SoC * * Copyright (c) 2016-2017 Andreas Färber - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/arch/arm/boot/dts/pxa25x.dtsi b/arch/arm/boot/dts/pxa25x.dtsi @@ -80,6 +80,10 @@ #pwm-cells = <1>; clocks = <&clks CLK_PWM1>; }; + + rtc@40900000 { + clocks = <&clks CLK_OSC32k768>; + }; }; timer@40a00000 { diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi @@ -71,7 +71,7 @@ clocks = <&clks CLK_PWM1>; }; - pwri2c: i2c@40f000180 { + pwri2c: i2c@40f00180 { compatible = "mrvl,pxa-i2c"; reg = <0x40f00180 0x24>; interrupts = <6>; @@ -113,6 +113,10 @@ status = "disabled"; }; + + rtc@40900000 { + clocks = <&clks CLK_OSC32k768>; + }; }; clocks { diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi @@ -9,6 +9,25 @@ #include "skeleton.dtsi" #include "dt-bindings/clock/pxa-clock.h" +#define PMGROUP(pin) #pin +#define PMMUX(func, pin, af) \ + mux- ## func { \ + groups = PMGROUP(P ## pin); \ + function = #af; \ + } +#define PMMUX_LPM_LOW(func, pin, af) \ + mux- ## func { \ + groups = PMGROUP(P ## pin); \ + function = #af; \ + low-power-disable; \ + } +#define PMMUX_LPM_HIGH(func, pin, af) \ + mux- ## func { \ + groups = PMGROUP(P ## pin); \ + function = #af; \ + low-power-enable; \ + } + / { model = "Marvell PXA2xx family SoC"; compatible = "marvell,pxa2xx"; @@ -76,7 +95,7 @@ }; }; - ffuart: uart@40100000 { + ffuart: serial@40100000 { compatible = "mrvl,pxa-uart"; reg = <0x40100000 0x30>; interrupts = <22>; @@ -84,7 +103,7 @@ status = "disabled"; }; - btuart: uart@40200000 { + btuart: serial@40200000 { compatible = "mrvl,pxa-uart"; reg = <0x40200000 0x30>; interrupts = <21>; @@ -92,7 +111,7 @@ status = "disabled"; }; - stuart: uart@40700000 { + stuart: serial@40700000 { compatible = "mrvl,pxa-uart"; reg = <0x40700000 0x30>; interrupts = <20>; @@ -100,7 +119,7 @@ status = "disabled"; }; - hwuart: uart@41100000 { + hwuart: serial@41100000 { compatible = "mrvl,pxa-uart"; reg = <0x41100000 0x30>; interrupts = <7>; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -1611,10 +1611,11 @@ clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; - port { - etb_in: endpoint { - slave-mode; - remote-endpoint = <&replicator_out0>; + in-ports { + port { + etb_in: endpoint { + remote-endpoint = <&replicator_out0>; + }; }; }; }; @@ -1626,10 +1627,11 @@ clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; - port { - tpiu_in: endpoint { - slave-mode; - remote-endpoint = <&replicator_out1>; + in-ports { + port { + tpiu_in: endpoint { + remote-endpoint = <&replicator_out1>; + }; }; }; }; @@ -1640,7 +1642,7 @@ clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; @@ -1656,10 +1658,11 @@ remote-endpoint = <&tpiu_in>; }; }; - port@2 { - reg = <0>; + }; + + in-ports { + port { replicator_in: endpoint { - slave-mode; remote-endpoint = <&funnel_out>; }; }; @@ -1673,7 +1676,7 @@ clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; - ports { + in-ports { #address-cells = <1>; #size-cells = <0>; @@ -1687,33 +1690,31 @@ port@0 { reg = <0>; funnel_in0: endpoint { - slave-mode; remote-endpoint = <&etm0_out>; }; }; port@1 { reg = <1>; funnel_in1: endpoint { - slave-mode; remote-endpoint = <&etm1_out>; }; }; port@4 { reg = <4>; funnel_in4: endpoint { - slave-mode; remote-endpoint = <&etm2_out>; }; }; port@5 { reg = <5>; funnel_in5: endpoint { - slave-mode; remote-endpoint = <&etm3_out>; }; }; - port@8 { - reg = <0>; + }; + + out-ports { + port { funnel_out: endpoint { remote-endpoint = <&replicator_in>; }; @@ -1730,9 +1731,11 @@ cpu = <&CPU0>; - port { - etm0_out: endpoint { - remote-endpoint = <&funnel_in0>; + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = <&funnel_in0>; + }; }; }; }; @@ -1746,9 +1749,11 @@ cpu = <&CPU1>; - port { - etm1_out: endpoint { - remote-endpoint = <&funnel_in1>; + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = <&funnel_in1>; + }; }; }; }; @@ -1762,9 +1767,11 @@ cpu = <&CPU2>; - port { - etm2_out: endpoint { - remote-endpoint = <&funnel_in4>; + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = <&funnel_in4>; + }; }; }; }; @@ -1778,9 +1785,11 @@ cpu = <&CPU3>; - port { - etm3_out: endpoint { - remote-endpoint = <&funnel_in5>; + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = <&funnel_in5>; + }; }; }; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -52,78 +52,85 @@ cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a7"; - enable-method = "qcom,kpss-acc-v1"; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; qcom,acc = <&acc0>; qcom,saw = <&saw0>; reg = <0x0>; clocks = <&gcc GCC_APPS_CLK_SRC>; clock-frequency = <0>; - operating-points = < - /* kHz uV (fixed) */ - 48000 1100000 - 200000 1100000 - 500000 1100000 - 716000 1100000 - >; clock-latency = <256000>; + operating-points-v2 = <&cpu0_opp_table>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a7"; - enable-method = "qcom,kpss-acc-v1"; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; qcom,acc = <&acc1>; qcom,saw = <&saw1>; reg = <0x1>; clocks = <&gcc GCC_APPS_CLK_SRC>; clock-frequency = <0>; - operating-points = < - /* kHz uV (fixed) */ - 48000 1100000 - 200000 1100000 - 500000 1100000 - 666000 1100000 - >; clock-latency = <256000>; + operating-points-v2 = <&cpu0_opp_table>; }; cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a7"; - enable-method = "qcom,kpss-acc-v1"; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; qcom,acc = <&acc2>; qcom,saw = <&saw2>; reg = <0x2>; clocks = <&gcc GCC_APPS_CLK_SRC>; clock-frequency = <0>; - operating-points = < - /* kHz uV (fixed) */ - 48000 1100000 - 200000 1100000 - 500000 1100000 - 666000 1100000 - >; clock-latency = <256000>; + operating-points-v2 = <&cpu0_opp_table>; }; cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a7"; - enable-method = "qcom,kpss-acc-v1"; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; qcom,acc = <&acc3>; qcom,saw = <&saw3>; reg = <0x3>; clocks = <&gcc GCC_APPS_CLK_SRC>; clock-frequency = <0>; - operating-points = < - /* kHz uV (fixed) */ - 48000 1100000 - 200000 1100000 - 500000 1100000 - 666000 1100000 - >; clock-latency = <256000>; + operating-points-v2 = <&cpu0_opp_table>; }; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-48000000 { + opp-hz = /bits/ 64 <48000000>; + clock-latency-ns = <256000>; + }; + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + clock-latency-ns = <256000>; + }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + clock-latency-ns = <256000>; + }; + opp-716000000 { + opp-hz = /bits/ 64 <716000000>; + clock-latency-ns = <256000>; + }; }; pmu { @@ -291,49 +298,49 @@ status = "disabled"; }; - acc0: clock-controller@b088000 { - compatible = "qcom,kpss-acc-v1"; - reg = <0x0b088000 0x1000>, <0xb008000 0x1000>; - }; + acc0: clock-controller@b088000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b088000 0x1000>, <0xb008000 0x1000>; + }; - acc1: clock-controller@b098000 { - compatible = "qcom,kpss-acc-v1"; - reg = <0x0b098000 0x1000>, <0xb008000 0x1000>; - }; + acc1: clock-controller@b098000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b098000 0x1000>, <0xb008000 0x1000>; + }; - acc2: clock-controller@b0a8000 { - compatible = "qcom,kpss-acc-v1"; - reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>; - }; + acc2: clock-controller@b0a8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>; + }; - acc3: clock-controller@b0b8000 { - compatible = "qcom,kpss-acc-v1"; - reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>; - }; + acc3: clock-controller@b0b8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>; + }; - saw0: regulator@b089000 { - compatible = "qcom,saw2"; - reg = <0x02089000 0x1000>, <0x0b009000 0x1000>; + saw0: regulator@b089000 { + compatible = "qcom,saw2"; + reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>; regulator; - }; + }; - saw1: regulator@b099000 { - compatible = "qcom,saw2"; - reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>; - regulator; - }; + saw1: regulator@b099000 { + compatible = "qcom,saw2"; + reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>; + regulator; + }; - saw2: regulator@b0a9000 { - compatible = "qcom,saw2"; - reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>; - regulator; - }; + saw2: regulator@b0a9000 { + compatible = "qcom,saw2"; + reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>; + regulator; + }; - saw3: regulator@b0b9000 { - compatible = "qcom,saw2"; - reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>; - regulator; - }; + saw3: regulator@b0b9000 { + compatible = "qcom,saw2"; + reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>; + regulator; + }; blsp1_uart1: serial@78af000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; @@ -387,7 +394,7 @@ #size-cells = <2>; ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000 - 0x82000000 0 0x48000000 0x48000000 0 0x10000000>; + 0x82000000 0 0x40300000 0x40300000 0 0x400000>; interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>; interrupt-names = "msi"; diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts @@ -2,26 +2,8 @@ #include "qcom-ipq8064-v1.0.dtsi" / { - model = "Qualcomm IPQ8064/AP148"; - compatible = "qcom,ipq8064-ap148", "qcom,ipq8064"; - - aliases { - serial0 = &gsbi4_serial; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; + model = "Qualcomm Technologies, Inc. IPQ8064/AP-148"; + compatible = "qcom,ipq8064-ap148"; soc { pinmux@800000 { @@ -31,73 +13,22 @@ bias-disable; }; - spi_pins: spi_pins { + buttons_pins: buttons_pins { mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - drive-strength = <10>; - bias-none; + pins = "gpio54", "gpio65"; + drive-strength = <2>; + bias-pull-up; }; }; }; gsbi@16300000 { - qcom,mode = <GSBI_PROT_I2C_UART>; - status = "ok"; - serial@16340000 { + i2c@16380000 { status = "ok"; - }; - - i2c4: i2c@16380000 { - status = "ok"; - clock-frequency = <200000>; - pinctrl-0 = <&i2c4_pins>; pinctrl-names = "default"; }; }; - - gsbi5: gsbi@1a200000 { - qcom,mode = <GSBI_PROT_SPI>; - status = "ok"; - - spi4: spi@1a280000 { - status = "ok"; - spi-max-frequency = <50000000>; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 0>; - - flash: m25p80@0 { - compatible = "s25fl256s1"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - - partition@0 { - label = "rootfs"; - reg = <0x0 0x1000000>; - }; - - partition@1 { - label = "scratch"; - reg = <0x1000000 0x1000000>; - }; - }; - }; - }; - - sata-phy@1b400000 { - status = "ok"; - }; - - sata@29000000 { - ports-implemented = <0x1>; - status = "ok"; - }; }; }; diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi @@ -1,2 +1,127 @@ // SPDX-License-Identifier: GPL-2.0 #include "qcom-ipq8064.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "Qualcomm Technologies, Inc. IPQ8064-v1.0"; + + aliases { + serial0 = &gsbi4_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + soc { + gsbi@16300000 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "ok"; + + serial@16340000 { + status = "ok"; + }; + }; + + gsbi5: gsbi@1a200000 { + qcom,mode = <GSBI_PROT_SPI>; + status = "ok"; + + spi4: spi@1a280000 { + status = "ok"; + spi-max-frequency = <50000000>; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 0>; + + flash: m25p80@0 { + compatible = "s25fl256s1"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + + partition@0 { + label = "rootfs"; + reg = <0x0 0x1000000>; + }; + + partition@1 { + label = "scratch"; + reg = <0x1000000 0x1000000>; + }; + }; + }; + }; + + sata-phy@1b400000 { + status = "ok"; + }; + + sata@29000000 { + ports-implemented = <0x1>; + status = "ok"; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-0 = <&buttons_pins>; + pinctrl-names = "default"; + + button@1 { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + debounce-interval = <60>; + }; + button@2 { + label = "wps"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&leds_pins>; + pinctrl-names = "default"; + + led@7 { + label = "led_usb1"; + gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "usbdev"; + default-state = "off"; + }; + + led@8 { + label = "led_usb3"; + gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "usbdev"; + default-state = "off"; + }; + + led@9 { + label = "status_led_fail"; + gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@26 { + label = "sata_led"; + gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@53 { + label = "status_led_pass"; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -2,8 +2,11 @@ /dts-v1/; #include "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-ipq806x.h> #include <dt-bindings/clock/qcom,lcc-ipq806x.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/reset/qcom,gcc-ipq806x.h> #include <dt-bindings/soc/qcom,gsbi.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -114,6 +117,61 @@ interrupt-controller; #interrupt-cells = <2>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + + pcie0_pins: pcie0_pinmux { + mux { + pins = "gpio3"; + function = "pcie1_rst"; + drive-strength = <12>; + bias-disable; + }; + }; + + pcie1_pins: pcie1_pinmux { + mux { + pins = "gpio48"; + function = "pcie2_rst"; + drive-strength = <12>; + bias-disable; + }; + }; + + pcie2_pins: pcie2_pinmux { + mux { + pins = "gpio63"; + function = "pcie3_rst"; + drive-strength = <12>; + bias-disable; + }; + }; + + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; + function = "gsbi5"; + drive-strength = <10>; + bias-none; + }; + }; + + leds_pins: leds_pins { + mux { + pins = "gpio7", "gpio8", "gpio9", + "gpio26", "gpio53"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + output-low; + }; + }; + + buttons_pins: buttons_pins { + mux { + pins = "gpio54"; + drive-strength = <2>; + bias-pull-up; + }; + }; }; intc: interrupt-controller@2000000 { @@ -373,5 +431,233 @@ #reset-cells = <1>; }; + pcie0: pci@1b500000 { + compatible = "qcom,pcie-ipq8064"; + reg = <0x1b500000 0x1000 + 0x1b502000 0x80 + 0x1b600000 0x100 + 0x0ff00000 0x100000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000 /* downstream I/O */ + 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */ + + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc PCIE_A_CLK>, + <&gcc PCIE_H_CLK>, + <&gcc PCIE_PHY_CLK>, + <&gcc PCIE_AUX_CLK>, + <&gcc PCIE_ALT_REF_CLK>; + clock-names = "core", "iface", "phy", "aux", "ref"; + + assigned-clocks = <&gcc PCIE_ALT_REF_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc PCIE_ACLK_RESET>, + <&gcc PCIE_HCLK_RESET>, + <&gcc PCIE_POR_RESET>, + <&gcc PCIE_PCI_RESET>, + <&gcc PCIE_PHY_RESET>, + <&gcc PCIE_EXT_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; + + pinctrl-0 = <&pcie0_pins>; + pinctrl-names = "default"; + + status = "disabled"; + perst-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; + }; + + pcie1: pci@1b700000 { + compatible = "qcom,pcie-ipq8064"; + reg = <0x1b700000 0x1000 + 0x1b702000 0x80 + 0x1b800000 0x100 + 0x31f00000 0x100000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000 /* downstream I/O */ + 0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */ + + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc PCIE_1_A_CLK>, + <&gcc PCIE_1_H_CLK>, + <&gcc PCIE_1_PHY_CLK>, + <&gcc PCIE_1_AUX_CLK>, + <&gcc PCIE_1_ALT_REF_CLK>; + clock-names = "core", "iface", "phy", "aux", "ref"; + + assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc PCIE_1_ACLK_RESET>, + <&gcc PCIE_1_HCLK_RESET>, + <&gcc PCIE_1_POR_RESET>, + <&gcc PCIE_1_PCI_RESET>, + <&gcc PCIE_1_PHY_RESET>, + <&gcc PCIE_1_EXT_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; + + pinctrl-0 = <&pcie1_pins>; + pinctrl-names = "default"; + + status = "disabled"; + perst-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; + }; + + pcie2: pci@1b900000 { + compatible = "qcom,pcie-ipq8064"; + reg = <0x1b900000 0x1000 + 0x1b902000 0x80 + 0x1ba00000 0x100 + 0x35f00000 0x100000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <2>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000 /* downstream I/O */ + 0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */ + + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc PCIE_2_A_CLK>, + <&gcc PCIE_2_H_CLK>, + <&gcc PCIE_2_PHY_CLK>, + <&gcc PCIE_2_AUX_CLK>, + <&gcc PCIE_2_ALT_REF_CLK>; + clock-names = "core", "iface", "phy", "aux", "ref"; + + assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc PCIE_2_ACLK_RESET>, + <&gcc PCIE_2_HCLK_RESET>, + <&gcc PCIE_2_POR_RESET>, + <&gcc PCIE_2_PCI_RESET>, + <&gcc PCIE_2_PHY_RESET>, + <&gcc PCIE_2_EXT_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; + + pinctrl-0 = <&pcie2_pins>; + pinctrl-names = "default"; + + status = "disabled"; + perst-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>; + }; + + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + sdcc1bam:dma@12402000 { + compatible = "qcom,bam-v1.3.0"; + reg = <0x12402000 0x8000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC1_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + sdcc3bam:dma@12182000 { + compatible = "qcom,bam-v1.3.0"; + reg = <0x12182000 0x8000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC3_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + amba { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sdcc@12400000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12400000 0x2000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <96000000>; + non-removable; + cap-sd-highspeed; + cap-mmc-highspeed; + mmc-ddr-1_8v; + vmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; + dma-names = "tx", "rx"; + }; + + sdcc@12180000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12180000 0x2000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <192000000>; + #mmc-ddr-1_8v; + sd-uhs-sdr104; + sd-uhs-ddr50; + vqmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc3bam 2>, <&sdcc3bam 1>; + dma-names = "tx", "rx"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -241,6 +241,33 @@ bias-pull-up; }; }; + + i2c3_pins: i2c3 { + mux { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + }; + + i2c12_pins: i2c12 { + mux { + pins = "gpio87", "gpio88"; + function = "blsp_i2c12"; + drive-strength = <2>; + bias-disable; + }; + }; + + mpu6515_pin: mpu6515 { + irq { + pins = "gpio73"; + function = "gpio"; + bias-disable; + input-enable; + }; + }; }; sdhci@f9824900 { @@ -277,6 +304,62 @@ linux,code = <KEY_VOLUMEDOWN>; }; }; + + i2c@f9968000 { + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c12_pins>; + clock-frequency = <100000>; + qcom,src-freq = <50000000>; + + mpu6515@68 { + compatible = "invensense,mpu6515"; + reg = <0x68>; + interrupts-extended = <&msmgpio 73 IRQ_TYPE_EDGE_FALLING>; + vddio-supply = <&pm8941_lvs1>; + + pinctrl-names = "default"; + pinctrl-0 = <&mpu6515_pin>; + + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + ak8963@f { + compatible = "asahi-kasei,ak8963"; + reg = <0x0f>; + // Currently only works in polling mode. + // gpios = <&msmgpio 61 0>; + vid-supply = <&pm8941_lvs1>; + vdd-supply = <&pm8941_l17>; + }; + + bmp280@76 { + compatible = "bosch,bmp280"; + reg = <0x76>; + vdda-supply = <&pm8941_lvs1>; + vddd-supply = <&pm8941_l17>; + }; + }; + }; + }; + + i2c@f9925000 { + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + clock-frequency = <100000>; + qcom,src-freq = <50000000>; + + avago_apds993@39 { + compatible = "avago,apds9930"; + reg = <0x39>; + interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8941_l17>; + vddio-supply = <&pm8941_lvs1>; + led-max-microamp = <100000>; + amstaos,proximity-diodes = <0>; + }; + }; }; &spmi_bus { diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -67,7 +67,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; - interrupts = <1 9 0xf04>; + interrupts = <GIC_PPI 9 0xf04>; CPU0: cpu@0 { compatible = "qcom,krait"; @@ -214,7 +214,7 @@ cpu-pmu { compatible = "qcom,krait-pmu"; - interrupts = <1 7 0xf04>; + interrupts = <GIC_PPI 7 0xf04>; }; clocks { @@ -233,17 +233,17 @@ timer { compatible = "arm,armv7-timer"; - interrupts = <1 2 0xf08>, - <1 3 0xf08>, - <1 4 0xf08>, - <1 1 0xf08>; + interrupts = <GIC_PPI 2 0xf08>, + <GIC_PPI 3 0xf08>, + <GIC_PPI 4 0xf08>, + <GIC_PPI 1 0xf08>; clock-frequency = <19200000>; }; adsp-pil { compatible = "qcom,msm8974-adsp-pil"; - interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>, + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, @@ -275,7 +275,7 @@ qcom,smem = <443>, <429>; interrupt-parent = <&intc>; - interrupts = <0 158 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&apcs 8 10>; @@ -300,7 +300,7 @@ qcom,smem = <435>, <428>; interrupt-parent = <&intc>; - interrupts = <0 27 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&apcs 8 14>; @@ -325,7 +325,7 @@ qcom,smem = <451>, <431>; interrupt-parent = <&intc>; - interrupts = <0 143 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&apcs 8 18>; @@ -364,7 +364,7 @@ modem_smsm: modem@1 { reg = <1>; - interrupts = <0 26 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; interrupt-controller; #interrupt-cells = <2>; @@ -372,7 +372,7 @@ adsp_smsm: adsp@2 { reg = <2>; - interrupts = <0 157 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>; interrupt-controller; #interrupt-cells = <2>; @@ -380,7 +380,7 @@ wcnss_smsm: wcnss@7 { reg = <7>; - interrupts = <0 144 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>; interrupt-controller; #interrupt-cells = <2>; @@ -445,50 +445,50 @@ frame@f9021000 { frame-number = <0>; - interrupts = <0 8 0x4>, - <0 7 0x4>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9021000 0x1000>, <0xf9022000 0x1000>; }; frame@f9023000 { frame-number = <1>; - interrupts = <0 9 0x4>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9023000 0x1000>; status = "disabled"; }; frame@f9024000 { frame-number = <2>; - interrupts = <0 10 0x4>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9024000 0x1000>; status = "disabled"; }; frame@f9025000 { frame-number = <3>; - interrupts = <0 11 0x4>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9025000 0x1000>; status = "disabled"; }; frame@f9026000 { frame-number = <4>; - interrupts = <0 12 0x4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9026000 0x1000>; status = "disabled"; }; frame@f9027000 { frame-number = <5>; - interrupts = <0 13 0x4>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9027000 0x1000>; status = "disabled"; }; frame@f9028000 { frame-number = <6>; - interrupts = <0 14 0x4>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9028000 0x1000>; status = "disabled"; }; @@ -586,7 +586,7 @@ blsp1_uart1: serial@f991d000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf991d000 0x1000>; - interrupts = <0 107 0x0>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -595,7 +595,7 @@ blsp1_uart2: serial@f991e000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf991e000 0x1000>; - interrupts = <0 108 0x0>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -605,7 +605,8 @@ compatible = "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; reg-names = "hc_mem", "core_mem"; - interrupts = <0 123 0>, <0 138 0>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>, @@ -618,8 +619,8 @@ compatible = "qcom,sdhci-msm-v4"; reg = <0xf9864900 0x11c>, <0xf9864000 0x800>; reg-names = "hc_mem", "core_mem"; - interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>, - <GIC_SPI 224 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC3_APPS_CLK>, <&gcc GCC_SDCC3_AHB_CLK>, @@ -632,7 +633,8 @@ compatible = "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; reg-names = "hc_mem", "core_mem"; - interrupts = <0 125 0>, <0 221 0>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>, @@ -699,25 +701,36 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - interrupts = <0 208 0>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; }; i2c@f9924000 { status = "disabled"; compatible = "qcom,i2c-qup-v2.1.1"; reg = <0xf9924000 0x1000>; - interrupts = <0 96 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; #address-cells = <1>; #size-cells = <0>; }; + blsp_i2c3: i2c@f9925000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9925000 0x1000>; + interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + blsp_i2c8: i2c@f9964000 { status = "disabled"; compatible = "qcom,i2c-qup-v2.1.1"; reg = <0xf9964000 0x1000>; - interrupts = <0 102 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; #address-cells = <1>; @@ -728,7 +741,7 @@ status = "disabled"; compatible = "qcom,i2c-qup-v2.1.1"; reg = <0xf9967000 0x1000>; - interrupts = <0 105 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; #address-cells = <1>; @@ -737,6 +750,17 @@ dma-names = "tx", "rx"; }; + blsp_i2c12: i2c@f9968000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9968000 0x1000>; + interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + spmi_bus: spmi@fc4cf000 { compatible = "qcom,spmi-pmic-arb"; reg-names = "core", "intr", "cnfg"; @@ -744,7 +768,7 @@ <0xfc4cb000 0x1000>, <0xfc4ca000 0x1000>; interrupt-names = "periph_irq"; - interrupts = <0 190 0>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; qcom,ee = <0>; qcom,channel = <0>; #address-cells = <2>; @@ -770,10 +794,11 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - port { - etr_in: endpoint { - slave-mode; - remote-endpoint = <&replicator_out0>; + in-ports { + port { + etr_in: endpoint { + remote-endpoint = <&replicator_out0>; + }; }; }; }; @@ -785,10 +810,11 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - port { - tpiu_in: endpoint { - slave-mode; - remote-endpoint = <&replicator_out1>; + in-ports { + port { + tpiu_in: endpoint { + remote-endpoint = <&replicator_out1>; + }; }; }; }; @@ -800,7 +826,7 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; @@ -816,10 +842,11 @@ remote-endpoint = <&tpiu_in>; }; }; - port@2 { - reg = <0>; + }; + + in-ports { + port { replicator_in: endpoint { - slave-mode; remote-endpoint = <&etf_out>; }; }; @@ -833,20 +860,17 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + out-ports { + port { etf_out: endpoint { remote-endpoint = <&replicator_in>; }; }; - port@1 { - reg = <0>; + }; + + in-ports { + port { etf_in: endpoint { - slave-mode; remote-endpoint = <&merger_out>; }; }; @@ -860,7 +884,7 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { + in-ports { #address-cells = <1>; #size-cells = <0>; @@ -873,12 +897,13 @@ port@1 { reg = <1>; merger_in1: endpoint { - slave-mode; remote-endpoint = <&funnel1_out>; }; }; - port@8 { - reg = <0>; + }; + + out-ports { + port { merger_out: endpoint { remote-endpoint = <&etf_in>; }; @@ -893,7 +918,7 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { + in-ports { #address-cells = <1>; #size-cells = <0>; @@ -910,12 +935,13 @@ port@5 { reg = <5>; funnel1_in5: endpoint { - slave-mode; remote-endpoint = <&kpss_out>; }; }; - port@8 { - reg = <0>; + }; + + out-ports { + port { funnel1_out: endpoint { remote-endpoint = <&merger_in1>; }; @@ -930,40 +956,38 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { + in-ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; kpss_in0: endpoint { - slave-mode; remote-endpoint = <&etm0_out>; }; }; port@1 { reg = <1>; kpss_in1: endpoint { - slave-mode; remote-endpoint = <&etm1_out>; }; }; port@2 { reg = <2>; kpss_in2: endpoint { - slave-mode; remote-endpoint = <&etm2_out>; }; }; port@3 { reg = <3>; kpss_in3: endpoint { - slave-mode; remote-endpoint = <&etm3_out>; }; }; - port@8 { - reg = <0>; + }; + + out-ports { + port { kpss_out: endpoint { remote-endpoint = <&funnel1_in5>; }; @@ -980,9 +1004,11 @@ cpu = <&CPU0>; - port { - etm0_out: endpoint { - remote-endpoint = <&kpss_in0>; + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = <&kpss_in0>; + }; }; }; }; @@ -996,9 +1022,11 @@ cpu = <&CPU1>; - port { - etm1_out: endpoint { - remote-endpoint = <&kpss_in1>; + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = <&kpss_in1>; + }; }; }; }; @@ -1012,9 +1040,11 @@ cpu = <&CPU2>; - port { - etm2_out: endpoint { - remote-endpoint = <&kpss_in2>; + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = <&kpss_in2>; + }; }; }; }; @@ -1028,9 +1058,11 @@ cpu = <&CPU3>; - port { - etm3_out: endpoint { - remote-endpoint = <&kpss_in3>; + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = <&kpss_in3>; + }; }; }; }; @@ -1040,21 +1072,21 @@ compatible = "qcom,smd"; adsp { - interrupts = <0 156 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&apcs 8 8>; qcom,smd-edge = <1>; }; modem { - interrupts = <0 25 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&apcs 8 12>; qcom,smd-edge = <0>; }; rpm { - interrupts = <0 168 1>; + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&apcs 8 0>; qcom,smd-edge = <15>; diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts @@ -14,3 +14,7 @@ model = "iW-RainboW-G20D-Q7 RZ/G1M based plus camera daughter board"; compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743"; }; + +&pciec { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts @@ -13,3 +13,7 @@ model = "iWave Systems RainboW-G20D-Qseven board based on RZ/G1M"; compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743"; }; + +&pciec { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts @@ -35,6 +35,8 @@ phy3: ethernet-phy@3 { reg = <3>; + interrupt-parent = <&gpio5>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; }; }; @@ -43,6 +45,16 @@ clock-frequency = <20000000>; }; +&pfc { + scif1_pins: scif1 { + groups = "scif1_data_b"; + function = "scif1"; + }; +}; + &scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/r8a77470-cpg-mssr.h> +#include <dt-bindings/power/r8a77470-sysc.h> / { compatible = "renesas,r8a77470"; #address-cells = <2>; @@ -16,6 +17,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "renesas,apmu"; cpu0: cpu@0 { device_type = "cpu"; @@ -23,16 +25,25 @@ reg = <0>; clock-frequency = <1000000000>; clocks = <&cpg CPG_CORE R8A77470_CLK_Z2>; - power-domains = <&sysc 5>; + power-domains = <&sysc R8A77470_PD_CA7_CPU0>; next-level-cache = <&L2_CA7>; }; + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <1>; + clock-frequency = <1000000000>; + clocks = <&cpg CPG_CORE R8A77470_CLK_Z2>; + power-domains = <&sysc R8A77470_PD_CA7_CPU1>; + next-level-cache = <&L2_CA7>; + }; L2_CA7: cache-controller-0 { compatible = "cache"; cache-unified; cache-level = <2>; - power-domains = <&sysc 21>; + power-domains = <&sysc R8A77470_PD_CA7_SCU>; }; }; @@ -60,6 +71,102 @@ #size-cells = <2>; ranges; + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a77470", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 23>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 912>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a77470", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 23>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 911>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a77470", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 910>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a77470", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 30>; + gpio-reserved-ranges = <17 10>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 909>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a77470", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 908>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a77470", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 907>; + }; + + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a77470"; + reg = <0 0xe6060000 0 0x118>; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a77470-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -70,6 +177,12 @@ #reset-cells = <1>; }; + apmu@e6151000 { + compatible = "renesas,r8a77470-apmu", "renesas,apmu"; + reg = <0 0xe6151000 0 0x188>; + cpus = <&cpu0 &cpu1>; + }; + rst: reset-controller@e6160000 { compatible = "renesas,r8a77470-rst"; reg = <0 0xe6160000 0 0x100>; @@ -97,7 +210,7 @@ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 407>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 407>; }; @@ -124,6 +237,20 @@ reg = <0 0xe6300000 0 0x20000>; }; + i2c4: i2c@e6520000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77470", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6520000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 927>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a77470", "renesas,rcar-dmac"; @@ -151,7 +278,7 @@ "ch12", "ch13", "ch14"; clocks = <&cpg CPG_MOD 219>; clock-names = "fck"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <15>; @@ -184,7 +311,7 @@ "ch12", "ch13", "ch14"; clocks = <&cpg CPG_MOD 218>; clock-names = "fck"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <15>; @@ -196,7 +323,7 @@ reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 812>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 812>; #address-cells = <1>; #size-cells = <0>; @@ -214,7 +341,7 @@ dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 721>; status = "disabled"; }; @@ -230,7 +357,7 @@ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, <&dmac1 0x2d>, <&dmac1 0x2e>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 720>; status = "disabled"; }; @@ -246,7 +373,7 @@ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, <&dmac1 0x2b>, <&dmac1 0x2c>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 719>; status = "disabled"; }; @@ -262,7 +389,7 @@ dmas = <&dmac0 0x2f>, <&dmac0 0x30>, <&dmac1 0x2f>, <&dmac1 0x30>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 718>; status = "disabled"; }; @@ -278,7 +405,7 @@ dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, <&dmac1 0xfb>, <&dmac1 0xfc>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 715>; status = "disabled"; }; @@ -294,11 +421,26 @@ dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, <&dmac1 0xfd>, <&dmac1 0xfe>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 714>; status = "disabled"; }; + sdhi2: sd@ee160000 { + compatible = "renesas,sdhi-r8a77470", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee160000 0 0x328>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, + <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 312>; + status = "disabled"; + }; + gic: interrupt-controller@f1001000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -309,7 +451,7 @@ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 408>; }; diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Reference Device Tree Source for the Bock-W board + * Reference Device Tree Source for the R-Car M1A (R8A77781) Bock-W board * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for Renesas r8a7778 + * Device Tree Source for the R-Car M1A (R8A77781) SoC * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the Marzen board + * Device Tree Source for the R-Car H1 (R8A77790) Marzen board * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Simon Horman diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for Renesas r8a7779 + * Device Tree Source for the R-Car H1 (R8A77790) SoC * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Simon Horman @@ -344,7 +344,7 @@ sata: sata@fc600000 { compatible = "renesas,sata-r8a7779", "renesas,rcar-sata"; - reg = <0xfc600000 0x2000>; + reg = <0xfc600000 0x200000>; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7779_CLK_SATA>; power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; diff --git a/arch/arm/boot/dts/r8a7790-stout.dts b/arch/arm/boot/dts/r8a7790-stout.dts @@ -318,6 +318,10 @@ interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + onkey { + compatible = "dlg,da9063-onkey"; + }; + rtc { compatible = "dlg,da9063-rtc"; }; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a7790 SoC + * Device Tree Source for the R-Car H2 (R8A77900) SoC * * Copyright (C) 2015 Renesas Electronics Corporation * Copyright (C) 2013-2014 Renesas Solutions Corp. @@ -1559,7 +1559,7 @@ sata0: sata@ee300000 { compatible = "renesas,sata-r8a7790", "renesas,rcar-gen2-sata"; - reg = <0 0xee300000 0 0x2000>; + reg = <0 0xee300000 0 0x200000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 815>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; @@ -1570,7 +1570,7 @@ sata1: sata@ee500000 { compatible = "renesas,sata-r8a7790", "renesas,rcar-gen2-sata"; - reg = <0 0xee500000 0 0x2000>; + reg = <0 0xee500000 0 0x200000>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 814>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a7791 SoC + * Device Tree Source for the R-Car M2-W (R8A77910) SoC * * Copyright (C) 2013-2015 Renesas Electronics Corporation * Copyright (C) 2013-2014 Renesas Solutions Corp. @@ -1543,7 +1543,7 @@ sata0: sata@ee300000 { compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata"; - reg = <0 0xee300000 0 0x2000>; + reg = <0 0xee300000 0 0x200000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 815>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; @@ -1554,7 +1554,7 @@ sata1: sata@ee500000 { compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata"; - reg = <0 0xee500000 0 0x2000>; + reg = <0 0xee500000 0 0x200000>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 814>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a7792 SoC + * Device Tree Source for the R-Car V2H (R8A77920) SoC * * Copyright (C) 2016 Cogent Embedded Inc. */ @@ -829,7 +829,6 @@ du: display@feb00000 { compatible = "renesas,du-r8a7792"; reg = <0 0xfeb00000 0 0x40000>; - reg-names = "du"; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 724>, diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts @@ -596,6 +596,10 @@ status = "okay"; }; +&cpu0 { + cpu0-supply = <&vdd_dvfs>; +}; + &rwdt { timeout-sec = <60>; status = "okay"; @@ -725,6 +729,18 @@ compatible = "dlg,da9063-watchdog"; }; }; + + vdd_dvfs: regulator@68 { + compatible = "dlg,da9210"; + reg = <0x68>; + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; }; &i2c4 { diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a7793 SoC + * Device Tree Source for the R-Car M2-N (R8A77930) SoC * * Copyright (C) 2014-2015 Renesas Electronics Corporation */ diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts @@ -405,6 +405,31 @@ clock-frequency = <400000>; }; +&i2c7 { + status = "okay"; + clock-frequency = <100000>; + + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + interrupt-parent = <&gpio3>; + interrupts = <31 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + onkey { + compatible = "dlg,da9063-onkey"; + }; + + rtc { + compatible = "dlg,da9063-rtc"; + }; + + wdt { + compatible = "dlg,da9063-watchdog"; + }; + }; +}; + &mmcif0 { pinctrl-0 = <&mmcif0_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a7794 SoC + * Device Tree Source for the R-Car E2 (R8A77940) SoC * * Copyright (C) 2014 Renesas Electronics Corporation * Copyright (C) 2014 Ulrich Hecht @@ -1349,7 +1349,6 @@ du: display@feb00000 { compatible = "renesas,du-r8a7794"; reg = <0 0xfeb00000 0 0x40000>; - reg-names = "du"; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi @@ -7,6 +7,7 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/r9a06g032-sysctrl.h> / { compatible = "renesas,r9a06g032"; @@ -21,14 +22,14 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0>; - clocks = <&sysctrl 84>; + clocks = <&sysctrl R9A06G032_CLK_A7MP>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <1>; - clocks = <&sysctrl 84>; + clocks = <&sysctrl R9A06G032_CLK_A7MP>; enable-method = "renesas,r9a06g032-smp"; cpu-release-addr = <0 0x4000c204>; }; @@ -77,13 +78,90 @@ }; uart0: serial@40060000 { - compatible = "snps,dw-apb-uart"; + compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart", "snps,dw-apb-uart"; reg = <0x40060000 0x400>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&sysctrl 146>; - clock-names = "baudclk"; + clocks = <&sysctrl R9A06G032_CLK_UART0>, <&sysctrl R9A06G032_HCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + status = "disabled"; + }; + + uart1: serial@40061000 { + compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart", "snps,dw-apb-uart"; + reg = <0x40061000 0x400>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&sysctrl R9A06G032_CLK_UART1>, <&sysctrl R9A06G032_HCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + status = "disabled"; + }; + + uart2: serial@40062000 { + compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart", "snps,dw-apb-uart"; + reg = <0x40062000 0x400>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&sysctrl R9A06G032_CLK_UART2>, <&sysctrl R9A06G032_HCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + status = "disabled"; + }; + + uart3: serial@50000000 { + compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart"; + reg = <0x50000000 0x400>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&sysctrl R9A06G032_CLK_UART3>, <&sysctrl R9A06G032_HCLK_UART3>; + clock-names = "baudclk", "apb_pclk"; + status = "disabled"; + }; + + uart4: serial@50001000 { + compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart"; + reg = <0x50001000 0x400>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&sysctrl R9A06G032_CLK_UART4>, <&sysctrl R9A06G032_HCLK_UART4>; + clock-names = "baudclk", "apb_pclk"; + status = "disabled"; + }; + + uart5: serial@50002000 { + compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart"; + reg = <0x50002000 0x400>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&sysctrl R9A06G032_CLK_UART5>, <&sysctrl R9A06G032_HCLK_UART5>; + clock-names = "baudclk", "apb_pclk"; + status = "disabled"; + }; + + uart6: serial@50003000 { + compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart"; + reg = <0x50003000 0x400>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&sysctrl R9A06G032_CLK_UART6>, <&sysctrl R9A06G032_HCLK_UART6>; + clock-names = "baudclk", "apb_pclk"; + status = "disabled"; + }; + + uart7: serial@50004000 { + compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart"; + reg = <0x50004000 0x400>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&sysctrl R9A06G032_CLK_UART7>, <&sysctrl R9A06G032_HCLK_UART7>; + clock-names = "baudclk", "apb_pclk"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi @@ -733,7 +733,7 @@ /* no rts / cts for uart2 */ }; - spi { + spi-pins { spi_txd:spi-txd { rockchip,pins = <1 29 RK_FUNC_3 &pcfg_pull_default>; }; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -93,6 +93,8 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwr>; startup-delay-us = <100000>; vin-supply = <&vcc_io>; }; @@ -315,6 +317,12 @@ }; }; + sd0 { + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <RK_GPIO3 1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + usb { host_vbus_drv: host-vbus-drv { rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi @@ -56,6 +56,11 @@ }; }; + display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vop0_out>, <&vop1_out>; + }; + sram: sram@10080000 { compatible = "mmio-sram"; reg = <0x10080000 0x8000>; @@ -69,6 +74,38 @@ }; }; + vop0: vop@1010c000 { + compatible = "rockchip,rk3188-vop"; + reg = <0x1010c000 0x1000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_LCDC0>, <&cru DCLK_LCDC0>, <&cru HCLK_LCDC0>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>; + reset-names = "axi", "ahb", "dclk"; + status = "disabled"; + + vop0_out: port { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + vop1: vop@1010e000 { + compatible = "rockchip,rk3188-vop"; + reg = <0x1010e000 0x1000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_LCDC1>, <&cru DCLK_LCDC1>, <&cru HCLK_LCDC1>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>; + reset-names = "axi", "ahb", "dclk"; + status = "disabled"; + + vop1_out: port { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + timer3: timer@2000e000 { compatible = "rockchip,rk3188-timer", "rockchip,rk3288-timer"; reg = <0x2000e000 0x20>; @@ -309,6 +346,51 @@ }; }; + lcdc1 { + lcdc1_dclk: lcdc1-dclk { + rockchip,pins = <2 RK_PD0 RK_FUNC_1 &pcfg_pull_none>; + }; + + lcdc1_den: lcdc1-den { + rockchip,pins = <2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>; + }; + + lcdc1_hsync: lcdc1-hsync { + rockchip,pins = <2 RK_PD2 RK_FUNC_1 &pcfg_pull_none>; + }; + + lcdc1_vsync: lcdc1-vsync { + rockchip,pins = <2 RK_PD3 RK_FUNC_1 &pcfg_pull_none>; + }; + + lcdc1_rgb24: ldcd1-rgb24 { + rockchip,pins = <2 RK_PA0 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PA1 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PA2 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PA3 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PA4 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PA5 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PA6 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PA7 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PB0 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PB1 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PB2 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PB3 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PB4 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PB5 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PB6 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PB7 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PC0 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PC1 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PC2 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PC3 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PC4 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PC5 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PC6 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PC7 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + pwm0 { pwm0_out: pwm0-out { rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_none>; diff --git a/arch/arm/boot/dts/rk3288-tinker-s.dts b/arch/arm/boot/dts/rk3288-tinker-s.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. + */ + +/dts-v1/; + +#include "rk3288-tinker.dtsi" + +/ { + model = "Rockchip RK3288 Asus Tinker Board S"; + compatible = "asus,rk3288-tinker-s", "rockchip,rk3288"; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; + max-frequency = <150000000>; + mmc-hs200-1_8v; + mmc-ddr-1_8v; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3288-tinker.dts b/arch/arm/boot/dts/rk3288-tinker.dts @@ -5,503 +5,9 @@ /dts-v1/; -#include "rk3288.dtsi" -#include <dt-bindings/input/input.h> +#include "rk3288-tinker.dtsi" / { - model = "Rockchip RK3288 Tinker Board"; + model = "Rockchip RK3288 Asus Tinker Board"; compatible = "asus,rk3288-tinker", "rockchip,rk3288"; - - chosen { - stdout-path = "serial2:115200n8"; - }; - - memory { - reg = <0x0 0x0 0x0 0x80000000>; - device_type = "memory"; - }; - - ext_gmac: external-gmac-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - clock-output-names = "ext_gmac"; - }; - - gpio-keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - autorepeat; - - pinctrl-names = "default"; - pinctrl-0 = <&pwrbtn>; - - button@0 { - gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; - label = "GPIO Key Power"; - linux,input-type = <1>; - wakeup-source; - debounce-interval = <100>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - act-led { - gpios=<&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; - linux,default-trigger="mmc0"; - }; - - heartbeat-led { - gpios=<&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>; - linux,default-trigger="heartbeat"; - }; - - pwr-led { - gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - }; - - sound { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,name = "rockchip,tinker-codec"; - simple-audio-card,mclk-fs = <512>; - - simple-audio-card,codec { - sound-dai = <&hdmi>; - }; - - simple-audio-card,cpu { - sound-dai = <&i2s>; - }; - }; - - vcc_sys: vsys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; - - vcc_sd: sdmmc-regulator { - compatible = "regulator-fixed"; - gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_pwr>; - regulator-name = "vcc_sd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <100000>; - vin-supply = <&vcc_io>; - }; -}; - -&cpu0 { - cpu0-supply = <&vdd_cpu>; -}; - -&gmac { - assigned-clocks = <&cru SCLK_MAC>; - assigned-clock-parents = <&ext_gmac>; - clock_in_out = "input"; - phy-mode = "rgmii"; - phy-supply = <&vcc33_lan>; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio4 7 0>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 1000000>; - tx_delay = <0x30>; - rx_delay = <0x10>; - status = "ok"; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&hdmi { - ddc-i2c-bus = <&i2c5>; - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - status = "okay"; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - reg = <0x1b>; - interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk808-clkout2"; - dvs-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>, - <&gpio0 12 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int &global_pwroff &dvs_1 &dvs_2>; - rockchip,system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc_sys>; - vcc2-supply = <&vcc_sys>; - vcc3-supply = <&vcc_sys>; - vcc4-supply = <&vcc_sys>; - vcc6-supply = <&vcc_sys>; - vcc7-supply = <&vcc_sys>; - vcc8-supply = <&vcc_io>; - vcc9-supply = <&vcc_io>; - vcc10-supply = <&vcc_io>; - vcc11-supply = <&vcc_sys>; - vcc12-supply = <&vcc_io>; - vddio-supply = <&vcc_io>; - - regulators { - vdd_cpu: DCDC_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-name = "vdd_arm"; - regulator-ramp-delay = <6000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: DCDC_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd_gpu"; - regulator-ramp-delay = <6000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc_ddr"; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_io: DCDC_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_io"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc18_ldo1: LDO_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc18_ldo1"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc33_mipi: LDO_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc33_mipi"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_10: LDO_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-name = "vdd_10"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc18_codec: LDO_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc18_codec"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vccio_sd: LDO_REG5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vccio_sd"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vdd10_lcd: LDO_REG6 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-name = "vdd10_lcd"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc_18: LDO_REG7 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc_18"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc18_lcd: LDO_REG8 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc18_lcd"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc33_sd: SWITCH_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc33_sd"; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc33_lan: SWITCH_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc33_lan"; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - }; - }; -}; - -&i2c2 { - status = "okay"; -}; - -&i2c5 { - status = "okay"; -}; - -&i2s { - #sound-dai-cells = <0>; - status = "okay"; -}; - -&io_domains { - status = "okay"; - - sdcard-supply = <&vccio_sd>; -}; - -&pinctrl { - pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { - drive-strength = <8>; - }; - - pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { - bias-pull-up; - drive-strength = <8>; - }; - - backlight { - bl_en: bl-en { - rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - buttons { - pwrbtn: pwrbtn { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - eth_phy { - eth_phy_pwr: eth-phy-pwr { - rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int: pmic-int { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO \ - &pcfg_pull_up>; - }; - - dvs_1: dvs-1 { - rockchip,pins = <RK_GPIO0 11 RK_FUNC_GPIO \ - &pcfg_pull_down>; - }; - - dvs_2: dvs-2 { - rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO \ - &pcfg_pull_down>; - }; - }; - - sdmmc { - sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, - <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, - <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, - <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; - }; - - sdmmc_clk: sdmmc-clk { - rockchip,pins = <6 20 RK_FUNC_1 \ - &pcfg_pull_none_drv_8ma>; - }; - - sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; - }; - - sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb { - host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - pwr_3g: pwr-3g { - rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pwm0 { - status = "okay"; -}; - -&saradc { - vref-supply = <&vcc18_ldo1>; - status ="okay"; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - card-detect-delay = <200>; - disable-wp; /* wp not hooked up */ - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; - status = "okay"; - vmmc-supply = <&vcc33_sd>; - vqmmc-supply = <&vccio_sd>; -}; - -&tsadc { - rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */ - rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ - status = "okay"; -}; - -&uart0 { - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&uart3 { - status = "okay"; -}; - -&uart4 { - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host1 { - status = "okay"; -}; - -&usb_otg { - status= "okay"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; - -&wdt { - status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi @@ -0,0 +1,502 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. + */ + +#include "rk3288.dtsi" +#include <dt-bindings/input/input.h> + +/ { + chosen { + stdout-path = "serial2:115200n8"; + }; + + memory { + reg = <0x0 0x0 0x0 0x80000000>; + device_type = "memory"; + }; + + ext_gmac: external-gmac-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&pwrbtn>; + + button@0 { + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + label = "GPIO Key Power"; + linux,input-type = <1>; + wakeup-source; + debounce-interval = <100>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + act-led { + gpios=<&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; + linux,default-trigger="mmc0"; + }; + + heartbeat-led { + gpios=<&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>; + linux,default-trigger="heartbeat"; + }; + + pwr-led { + gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "rockchip,tinker-codec"; + simple-audio-card,mclk-fs = <512>; + + simple-audio-card,codec { + sound-dai = <&hdmi>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s>; + }; + }; + + vcc_sys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwr>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; +}; + +&cpu0 { + cpu0-supply = <&vdd_cpu>; +}; + +&gmac { + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + clock_in_out = "input"; + phy-mode = "rgmii"; + phy-supply = <&vcc33_lan>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio4 7 0>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 1000000>; + tx_delay = <0x30>; + rx_delay = <0x10>; + status = "ok"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c5>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + dvs-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>, + <&gpio0 12 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int &global_pwroff &dvs_1 &dvs_2>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc_io>; + vcc9-supply = <&vcc_io>; + vcc10-supply = <&vcc_io>; + vcc11-supply = <&vcc_sys>; + vcc12-supply = <&vcc_io>; + vddio-supply = <&vcc_io>; + + regulators { + vdd_cpu: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-name = "vdd_arm"; + regulator-ramp-delay = <6000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd_gpu"; + regulator-ramp-delay = <6000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_io"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc18_ldo1: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_ldo1"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc33_mipi: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc33_mipi"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_10: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd_10"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc18_codec: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_codec"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd10_lcd: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_lcd"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_18: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_18"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc18_lcd: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_lcd"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc33_sd: SWITCH_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc33_sd"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc33_lan: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc33_lan"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2s { + #sound-dai-cells = <0>; + status = "okay"; +}; + +&io_domains { + status = "okay"; + + sdcard-supply = <&vccio_sd>; +}; + +&pinctrl { + pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { + drive-strength = <8>; + }; + + pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { + bias-pull-up; + drive-strength = <8>; + }; + + backlight { + bl_en: bl-en { + rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + buttons { + pwrbtn: pwrbtn { + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + eth_phy { + eth_phy_pwr: eth-phy-pwr { + rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int: pmic-int { + rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO \ + &pcfg_pull_up>; + }; + + dvs_1: dvs-1 { + rockchip,pins = <RK_GPIO0 11 RK_FUNC_GPIO \ + &pcfg_pull_down>; + }; + + dvs_2: dvs-2 { + rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO \ + &pcfg_pull_down>; + }; + }; + + sdmmc { + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, + <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, + <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, + <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + }; + + sdmmc_clk: sdmmc-clk { + rockchip,pins = <6 20 RK_FUNC_1 \ + &pcfg_pull_none_drv_8ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + }; + + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pwr_3g: pwr-3g { + rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc18_ldo1>; + status ="okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + disable-wp; /* wp not hooked up */ + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + status = "okay"; + vmmc-supply = <&vcc33_sd>; + vqmmc-supply = <&vccio_sd>; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host1 { + status = "okay";